What is Reddit's opinion of VELCRO Brand - Industrial Strength | Indoor & Outdoor Use | Superior Holding Power on Smooth Surfaces | Size 4ft x 2in | Tape, Black - Pack of 1, (Model: 90593)?

From 3.5 billion Reddit comments

This is a go to:

VELCRO Brand - Industrial Strength | Indoor & Outdoor Use | Superior Holding Power on Smooth Surfaces | Size 4ft x 2in | Tape, Black - Pack of 1, (Model: 90593) https://www.amazon.com/dp/B00006IC2T/ref=cm_sw_r_apan_i_W75THX3Q81XE8CQ7G9J5?_encoding=UTF8&psc=1

Here you go buddy:

VELCRO Brand - Industrial Strength | Indoor & Outdoor Use | Superior Holding Power on Smooth Surfaces | Size 4ft x 2in | Tape, Black - Pack of 1, (Model: 90593) https://www.amazon.com/dp/B00006IC2T/ref=cm_sw_r_apan_glt_i_N0MVHE9CJ3VMG08HJDGJ?_encoding=UTF8&psc=1

Use strips of industrial strength Velcro. It will hold a lot of weight and you can stretch the screen tight. I'm not sure if it will come off a painted wall cleanly, however.

I don't have any photos, sorry. I bought this big thing of industrial velcro: https://www.amazon.com/gp/product/B00006IC2T and I've used it for a million things. My Helium II jacket doesn't have a collapsible hood? Now it does with a tiny bit of velcro.

Ok, does that 5 yds of velcro have a sticky side on it? Or should I just buy this and cut those up?

This velcro tape with the cobb mount works great. I've had this on my original V3 mount for a year and a half without failure.

I initially used Velcro until I replaced the handguard with AI.

I bought some 'velcro tape' off amazon, cut it to size, and stuck it on the stock. It lets me switch patches out whenever I want.

https://www.amazon.com/VELCRO-Brand-Industrial-Strength-Fasteners/dp/B00006IC2T?th=1

I would give this a shot: https://smile.amazon.com/dp/B00006IC2T/ref=emc_b_5_t

you can actually put velcro tape on it and then you can use any pad. i polished a car with one of those and some chemical guys pads and it worked fine.

https://www.amazon.com/gp/product/B00006IC2T/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B009902YHO/ref=oh_aui_detailpage_o02_s00?ie=UTF8&th=1

I bought this from Michaels.
http://www.michaels.com/creatology-foam-sheet-12x18/M10597609.html?dwvar_M10597609_color=Medium%20Pink#q=foam+sheet&start=3

$0.99 each! I bought three only used two. Yeah, the one I linked is pink, they got black and couldn't find a link for that. They also got adhesive version which I did not buy. That may actually be better and it's the same price. I used industrial velcro that I bought from Amazon last year https://www.amazon.com/VELCRO-Brand-Industrial-Strength-Black/dp/B00006IC2T?th=1

It's on my SCT8 and works great and fits possibly better than the offical Celestron Dew shield because I cut it in a way it is inside partly wrapping under the dovetail and fits perfect. It's light and doesn't add weight and it's easily taken off if put the velcro in the right areas.

use velcro, the one that you stick on, and stick it on the strap and velcro it into place i would assume https://www.amazon.com/VELCRO-Industrial-Strength-Wide-Black/dp/B00006IC2T

also sold at joanne fabrics if you are in the states, probably sold at hardware store too.

http://www.joann.com/velcro-brand-sticky-back-tape-3-4inx3-1-2in-4-pkg/prd10500.html

I use a combination of velcro on the body and the battery, and a couple of Rat Straps.

This is the one that I got. Just cut it down to size.

That $15 velcro is seven bucks on Amazon . . . I just bought some last week.

Do you know where they come from? If they’re under the hood, could just be a loose heat shield, if it’s under the car, I’d put it at 90% a heat shield, particularly if it’s a Japanese car (from experience, they rot out around the fasteners). For the one under the car, you can rip it off without an issue or replace it with another that will do the same thing.

For interior squeaks and rattles, if you can locate the source, you can buy (Velcro tape)[https://www.amazon.ca/VELCRO-Brand-Industrial-Strength-Black/dp/B00006IC2T] and use the fluffy side as insulation.

And if you have to replace one of those cables you have to replace all those zipties.

Get a roll of velcro and just cut custom strip lengths.

https://www.amazon.com/VELCRO-Brand-Industrial-Strength-Black/dp/B00006IC2T

http://www.amazon.com/VELCRO-Industrial-Strength-Wide-Black/dp/B00006IC2T

Like this?

I use this: http://www.amazon.com/gp/product/B00006IC2T/ref=oh_details_o00_s00_i01?ie=UTF8&psc=1 Put a small strip on my dash (which is black so it matches) and a small strip on the back of my phone case. I use it for MP3 players & Phones works great, just throw it on there and it won't move. Plus there's a lot of other uses