None of the working arms or pivots in stock. So short term I ordered this VIVO Black Ultra Wide Screen TV Desk Mount for up to 55 inch Screens, Full Motion Height Adjustable Single Television Stand, STAND-V155C https://www.amazon.ca/dp/B07GFRP5HT/ref=cm_sw_r_cp_api_fabc_gZU-FbTYE1FH4 Will see if it works
This vivo mount which isn't the most ideal, but it's $60 and if I wanted more articulation it's about 10x that cost.
Great compilation of tips. All stuff I found after a lot of research and now I use each one of these daily, so I'm sure this video will help people who haven't done a lot of research already.
One other thing I'd mention is a cheaper alternative to the ergotron is something like this https://www.amazon.ca/gp/product/B07GFRP5HT?psc=1 which I'm using for my 48" CX on a standing desk. Was $80 CAD instead of $300+ for an articulating arm.
Yes that totally makes sense!
My C1 65 is mounted on the same stand as above in the living room.
Though this stand doesnt go with my preference for my taste on the desk. So I will try this from Amazon crossing fingers that its not too wobbly.
I bought this because I didn't need an arm/movement and didn't want to spend an arm and a leg for something. This will work for a G9 also or super ultra wide. VIVO Black Ultra Wide Screen TV... https://www.amazon.com/dp/B07GFRP5HT?ref=ppx_pop_mob_ap_share
If you need an arm you can always look up an ergotron hx. They are $300+ dollars though but will handle the weight of a G9 or 48" OLED with ease and give you some flexibility in movement.
Is this what you are trying to achieve? -
Maybe this is the one you're looking for?
VIVO Black Ultra Wide Screen TV Desk Mount for up to 55 inch Screens, Full Motion Height Adjustable Single Television Stand, STAND-V155C https://www.amazon.com/dp/B07GFRP5HT/ref=cm_sw_r_apan_i_J97VZCPTDBGBXQ7Y70KM
I'm hoping you can move the desk forward to mount a desk stand. I use this one for my 48 inch: https://smile.amazon.com/dp/B07GFRP5HT/ref=cm_sw_r_cp_apa_glt_fabc_VQS23EQSNN4V19WXM93B?_encoding=UTF8&psc=1
My previous arm was supposed to support up to 33 lb (the actual weight of the OLED), but would always tilt forward.
The other option is to get a floor stand to avoid putting holes in the wall. That may be more expensive than the other options.
After a bunch of research I ordered this one.
I haven't had a chance to mount it yet because we're in the middle of a remodel and it goes in the new space.
I'm using for an AOC 49" and not the G9. I think the G9 has some special issues due to the degree of the curve. However, this is rated for 66 lbs. which is like half the weight of the G9.
I am in a similar boat, I am thinking 72x36 (even if I use a keyboard tray) though I am probably going thicker. My mount allows up to desk thickness of 3.25
​
If you are wondering what monitor stand I am using. It's the VIVO Black Ultra Wide Stand on Amazon. So far 2 days and nothing has broken. It honestly still surprises me that (4) M4 screws hold up this chonker of a monitor.
Thanks yeah, I noticed that about the stand. I have this in my Amazon list (likely purchase if I grab either 'monitor'): https://www.amazon.com/dp/B07GFRP5HT/ref=cm_sw_r_cp_apa_fabc_AvxUFbRX6W1KP?_encoding=UTF8&psc=1
Might be an alternative for you over wall mount, depending on your setup.
https://www.amazon.com/gp/product/B07GFRP5HT
Desk is 1-3/8" solid oak, and I've got two legs set up just to the sides of where I plan to mount the stand. I'd consider wall mounting, unfortunately the wall directly behind my desk has both plumbing and electrical going through it.....
this one is for up to 55 inch
https://www.amazon.com/gp/product/B07GFRP5HT/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1
If you're going for best price, TV mounts are a lot cheaper to hold up a lot of weight. This clamps to my desk and holds the G9 up for $50, you have to get the tilt right (via bolts) but once you do its pretty good.
This all assumes you won't move the monitor much tho, set and forget
I mounted my 48" OLED to my desk with this.
I ordered this for mine. https://www.amazon.com/gp/product/B07GFRP5HT/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1
Still haven't received it yet but Ive read good reviews from owners of the cx 48
My C2 48 is being held up by this stand. Great price and sturdy
VIVO Black Ultra Wide Screen TV Desk Mount for up to 55 inch Screens
Just add one of THESE to a table that maxes out at 48" and you'll have the extra height you're looking for. It's made to handle up to 55" and 66 lbs.
VIVO Black Ultra Wide Screen TV... https://www.amazon.com/dp/B07GFRP5HT?ref=ppx_pop_mob_ap_share
If you ever consider mounting your TV on a desk arm, you should consider this one: https://www.amazon.com/dp/B07GFRP5HT?psc=1&ref=ppx_yo2ov_dt_b_product_details
​
Works great!
This is the one I have, and it works quite beautifully: https://www.amazon.com/dp/B07GFRP5HT?psc=1&ref=ppx\_yo2ov\_dt\_b\_product\_details
I am using this: https://www.amazon.com/dp/B07GFRP5HT?psc=1&ref=ppx_yo2ov_dt_b_product_details
Everything you need is included. No need to buy anything separately.
Thank you! This is the one I am using https://www.amazon.com/gp/product/B07GFRP5HT/ref=ppx\_yo\_dt\_b\_asin\_title\_o03\_s00?ie=UTF8&psc=1
>Cant arm a 55in LGC1.
Sure you can, plenty of height adjustable arms for that size, from cheap to pricey to even ceiling mount..
Cheap https://www.amazon.com/VIVO-Adjustable-Television-Screens-STAND-V155C/dp/B07GFRP5HT
Pricey (should work as long as TV is within weight requirements) https://www.amazon.com/Ergotron-Single-Ultrawide-Monitor-Arm-1000R-Curved-Monitors-Up/dp/B0959D7HHH/ref=mp_s_a_1_1_sspa?crid=EOQ4C9XP6KI3&keywords=55%22%2Bmonitor%2Barm&qid=1651554828&sprefix=55%2Bmonitor%2Barm%2Caps%2C101&sr=8-1-s...
Thank you!
The C2 is not wall mounted. It is attached to this monitor arm: https://www.amazon.com/gp/product/B07GFRP5HT/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
The monitor stand is from Amazon: https://www.amazon.com/gp/product/B08P1V75GB/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&th=1
I changed its appearance of it with contact paper, which I also added to my desk.
It's on one of those desk mounts that don't move like an arm would. You can only tilt, and move the monitor up and down but that's it.
VIVO Black Ultra Wide Screen TV... https://www.amazon.com/dp/B07GFRP5HT?ref=ppx_pop_mob_ap_share
I have this arm. Awesome arm.
I am using this stand with my 48 C1: https://www.amazon.com/gp/product/B07GFRP5HT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I commented previously but I was looking around at mounts again because I want more height than the Ergotron has and saw a suggestion to look at TV mounts instead of monitor. This $60 VIVO TV Desk Mount says it can handle up to 55lbs, more than enough for the G9's 31lbs. There's also this slightly more premium VIVO Pneumatic for $100 that advertises holding 33lbs but has mixed reviews when it comes to the G9 specifically.
Hope this helps.
> a monitor arm with a clamp that supports 200x200mm?
> At the moment I've got my TV on my desk
That's your exact issue. You're looking for a monitor mount for your TV. Look for a TV mount for a TV instead.
Anyways, there's no shortage: * https://www.amazon.com/dp/B07GFRP5HT * https://www.amazon.com/dp/B083VTL39J * https://www.amazon.com/dp/B07PGWG8YG * https://www.amazon.com/dp/B071FX6H53 * https://www.amazon.com/dp/B07HXPT265 * https://www.amazon.com/dp/B08THT1Q4G
both monitors are on the same stand https://www.amazon.com/gp/product/B07GFRP5HT/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1
I bought this one for my $48 C1 and so far so good no issues.
I've got a desk mount for my 55" Samsung TV, and it takes up pretty much the whole height of the mount; there really isn't much underneath it in order to place anything else. With a 43" TV, there would be a bit more area underneath the TV to work with, but unless you can find a taller version of my first link, I don't think you'll be able to do what you are looking to do. Additionally, I wouldn't feel safe attaching or clamping a boom arm to this mount (and then the TV), since supporting something that heavy would be extremely difficult (and has a good chance to break the table/come crashing down). Perhaps getting a short throw/low profile boom arm for the 35" ultrawide and building a frame around that arm that is super sturdy, combined with the below links, will get you the height and strength needed to do this?
https://www.amazon.com/gp/product/B07GFRP5HT/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B08CK24TCX/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
I was skeptical at first but I ordered Vivo Widescreen TV Desk Mount and it worked perfect.
I saw a video that said to use this
https://www.amazon.ca/gp/product/B07GFRP5HT/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
https://www.amazon.ca/gp/product/B07MCMTCP3/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1
I'm not sure what the purpose is of the second bracket. I guess the main one doesn't support the tv? Or maybe it does and the other bracket is better?
Not sure
I got this: https://www.amazon.com/gp/product/B07GFRP5HT/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&th=1
can hold tvs up to 66lbs. Max tv size 55"
I will mount on saturday when i get the tv.
Mounting this monitor was a big headache because of the size of the mount I have and the desk. I had to drill a hole in my desk and make some adjustments with the center support to get the monitor to hold.
This is the mount I am using: https://www.amazon.com/gp/product/B07GFRP5HT/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
This is the desk:
https://www.amazon.com/gp/product/B07S11DQG6/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
I even had to get different bolts for all of it work. But the mount supports screens up to 55" and 66 pounds.
If you don't plan on moving it too much you can check this vivo arm for TVs it'll keep it flush as possible to the wall but you can't pull it closer, just tilts
It’s been perfect! It took some searching for the right one but it’s been the perfect addition. I found it here on amazon.