What is Reddit's opinion of VIVO Under-Desk and Wall Mount PC Adjustable Strap and Steel Bracket Holder, Computer Case Carrier, Black, MOUNT-PC02S?

From 3.5 billion Reddit comments

My build is an NR200P with a 5600X air-cooled with a Scythe Mugen 5 and a Sapphire Nitro+ 6900XT mounted horizontally. My rear fan is intake to help the air cooler, one top exhaust fan towards the front, and no intake on the bottom since the GPU is close enough to the mesh.

I've gone back and forth with the glass or mesh side panels, and honestly even with the glass and a 6900XT I had no issues with temps. It runs a few degrees cooler with the mesh certainly, but even with the glass nothing gets over 80c. In the end I decided to mount my case under my desk with one of these, and since I can't see it anyway I kept the mesh panel on.

I'm planning on doing a similar build (same oil and everything, but with a birch block from Home Depot). Was curious how much space there is behind/in front of the metal bar under the tabletop? I am hoping to install something like this (https://smile.amazon.com/VIVO-Under-Desk-Adjustable-Bracket-Holder/dp/B078JXC9X8/) to hold my desktop.

Also, separate question, how difficult was the finishing process? I don't really have anywhere other than my small apartment to do it, so I'm hoping it is doable indoors?

What about this one? Cheaper and I think the straps look better than the chrome rods.

VIVO Under-Desk and Wall Mount PC Adjustable Strap and Steel Bracket Holder, Computer Case Carrier, Black, MOUNT-PC02S https://www.amazon.com/dp/B078JXC9X8/ref=cm_sw_r_cp_api_glt_i_GK8BR3Q7TZWW7AMZYYXS?_encoding=UTF8&psc=1

I use this to Mount my Ncase M1 under the top of my sit/stand motorized desk: https://www.amazon.com/dp/B078JXC9X8/ref=cm_sw_r_cp_api_glt_fabc_3MVJ8KD8QPFTP23W68DX

Nothing fancy and does the job. A little tricky to adjust the straps once the case is in there, but I like how the PC is away from my ear so it feels quieter and as a bonus allows the bottom fans in the NCase extra room to exhaust out. Also it’s great because the PC just moves with the desk when I adjust the height, so no worrying about cables like if it was mounted stationary on the floor.

I don't have a photo just now, but I used one of these: https://www.amazon.com/VIVO-Under-Desk-Adjustable-Bracket-Holder/dp/B078JXC9X8/

As I have top fans exhausiting I did first glue and screw 2 pieces of wood to the desk, to then attach the mount to, so there's about 2-3 inches of air atop the case for airflow

Take extensor cable from wall, tape it bottom of your desk with 2 sided tape. Route cables, so they are right under table, and u are good to go..

I've been using this kind of attachment with all size of cases.. It works just fine :)
https://www.amazon.com/VIVO-Under-Desk-Adjustable-Bracket-Holder/dp/B078JXC9X8/ref=sr\_1\_7?dchild=1&keywords=pc+straps&qid=1631729183&sr=8-7

I am planning to buy a desk with a 1 inch thick carbonized bamboo desk top. I would like to mount my 15 lb CPU to the underside, most likely with this mount. What do I need to know when working with bamboo? Do I need to worry about the bamboo splitting when I drill into it? What length of screws should I use--would less than 1 inch screws be enough to support the weight?

How about this for you mount?

VIVO Under-Desk and Wall Mount PC Adjustable Strap and Steel Bracket Holder, Computer Case Carrier, Black, MOUNT-PC02S https://www.amazon.com/dp/B078JXC9X8/ref=cm_sw_r_cp_api_glc_i_A35.FbYAZ4S2W

Should allow you to mount horizontally.

How about the Vivo strap mount?

VIVO Under-Desk and Wall Mount PC Adjustable Strap and Steel Bracket Holder, Computer Case Carrier, Black, MOUNT-PC02S https://www.amazon.com/dp/B078JXC9X8/ref=cm_sw_r_cp_api_glc_fabc_rEH1Fb4AG2EYZ?_encoding=UTF8&psc=1

At load, no deshrouding, no additional fans underneath and no undervolting (although I'd like to give this a go at some point). The GPU is run at stock config, no tweaking (e.g. OC'ing or undervolting) whatsoever.

I just re-ran the test for a third time and for three hours. Results were the same:

• Avg = 60.8c
• Min = 49c
• Max = 66c

Test conditions:

• Ambient temperature of 23c according to the aircon thermostat in the room I'm in (nothing scientific)
• Heaven 4.0 with the "Extreme" preset (I also had Prime95 running to test the CPU at the same time)
• Run time of 3 hours
• Logs recorded using HWiNFO64, and specifically I did not start recording logs until after starting the Heaven test - i.e. the order of steps was (1) start Heaven test, (2) start logging, (3) leave running for 3 hours without touching my PC, (4) stop logging, (5) stop Heaven test

Let me know if I'm not testing properly. Or if these temps are unusually low, the only other thing I can think of is that I've now mounted the case under my desk using this. Which could mean less restricted airflow sucking air into the bottom of the case? I'm happy to do another test with it sitting on my desk if you think that would make a significant difference. Although the case feet on v6+ of the M1 are taller (15 mm) compared to previous versions which would help.

Yeah I'm having to go through a similar trade-off. If I had to choose (which it seems I do!), I'd prefer to keep the Gigabyte Aorus B550-I and NCase M1 over the C14S, so I'll probably just go with a U9S.

I'm not planning on doing any overclocking, and on popular advice I will aim to undervolt my GPU. So hopefully the U9S will provide more than sufficient cooling for that.

Also, as I'm planning to mount the case under my desk with this mount, another option I have is leaving the top cover off and keeping the Aorus+M1+C14S combo.

I have a desktop and I used a "CPU Mount" to mount my desktop under the desk.

You might have to look around to make sure you have the right size mount for your subwoofer and you might get a different sound signature off the ground, but i'd imagine it would look really clean.

Example : https://www.amazon.ca/VIVO-Under-Desk-Adjustable-Bracket-Holder/dp/B078JXC9X8/ref=sr_1_9?dchild=1&keywords=cpu+mount&qid=1601506886&sr=8-9

I tried 3M strips to stick my 2.0 speakers under the desk but it was just too strange sounding... But since the subwoofer is already under a desk you might luck out

Something like this maybe?

I used this to mount my PC underneath the cabinet: https://www.amazon.com/gp/product/B078JXC9X8. I mounted it sideways and not vertical like it shows on Amazon.

There’s also this one if you want to mount it under

VIVO Under-Desk and Wall Mount PC Adjustable Strap and Steel Bracket Holder, Computer Case Carrier, Black, MOUNT-PC02S https://www.amazon.com/dp/B078JXC9X8/

you can try to see if the vivo underdesk mount works for you, although the maximum compatibility is 25.6 inch, maybe your case will fit, the maximum width compatibility is 27.5 inch so maybe, here is the link https://www.amazon.co.jp/MOUNT-PC02S/dp/B078JXC9X8/ref=mp_s_a_1_1?crid=3LWBNYRLX52BL&keywords=vivo%E3%83%87%E3%82%B9%E3%82%AF%E4%B8%8B%E3%83%9E%E3%82%A6%E3%83%B3%E3%83%88&qid=1659242672&sprefix=vivo+under+desk+m9un%2Caps%2C284&sr=8-1. if that doesnt work maybe you can buy one of those alex units and try to put your case inside although the airflow will not be the best. the last solution to just keep your pc off the floor is a floor stand with wheels https://www.amazon.co.jp/Rolling-Desktop-Computer-Bracket-Cooling/dp/B095YRQ1YT/ref=mp_s_a_1_2?crid=I6422J2BBXWP&keywords=pc%E3%83%95%E3%83%AD%E3%82%A2%E3%82%B9%E3%82%BF%E3%83%B3%E3%83%89%E3%83%9B%E3%82%A4%E3%83%BC%E3%83%AB&qid=1659242930&... sorry for tye long links 😅

This is the hardware I used! Same kind of generic from Amazon haha https://www.amazon.com/dp/B078JXC9X8?psc=1&ref=ppx\_yo2ov\_dt\_b\_product\_details

Right now I’m using this but not gonna lie, it’s not that great.

I’d recommend something more sturdy like this

Much simpler, cheaper, and not restrictive

https://www.amazon.com/VIVO-Under-Desk-Adjustable-Bracket-Holder/dp/B078JXC9X8

i saw this mount optimum tech is using for his case m1 so this mount should work perfectly for the nr200 and this is also what I am going to use.

https://www.amazon.com/gp/product/B078JXC9X8/ref=ox_sc_act_image_20?smid=A3W3STWCK1O3NR&psc=1

I have done this twice (my wife and I have matching Aurora R11s), using this product:

https://smile.amazon.com/gp/product/B078JXC9X8/

Go here if that is out of stock still. https://www.google.com/shopping/product/15042817139310355203

It looks very clean, although the initial hang was a pain. The straps make you work a bit to get them dialed in just right.

It is also extremely secure. I used a furniture pad (the kind you put on the bottom of your furniture for use on a hardwood floor) on top of the tower to keep it from being jammed against the wood of the desk. You can see that here:

https://imgur.com/gzDIgky

And here is the final product: https://imgur.com/a/2WqeZs1

https://imgur.com/DshZeWy

https://www.amazon.com/VIVO-Under-Desk-Adjustable-Bracket-Holder/dp/B078JXC9X8

Was thinking of hanging a mo-ra3 under my desk using one of these.

Try amazon smile to donate to a charity of your choice automatically at no cost to you!
https://smile.amazon.com/dp/B078JXC9X8/ref=cm_sw_r_cp_apa_i_UiyJFbGXK42YS
^^^I'm ^^^a ^^^bot ^^^and ^^^this ^^^action ^^^was ^^^performed ^^^automatically.

these brackets and these straps

(links are in the image captions (look right))

Yep I got this one as recommended below which I'm planning to use with these straps. Just waiting on a new desk and will be able to hang once I have it. Dimensions of everything look good. Already built in the normal (fans at bottom) orientation in my T1 so almost ready to go.

Will post results once I have it together!