What is Reddit's opinion of VIVO Dual LCD 13 to 32 inch Monitor Vertical Desk Stand, Free-Standing Mount for 2 Screens STAND-V002N?

From 3.5 billion Reddit comments

I'm pretty sure it's this one

I don't have any pictures right now; my rig is still packed up from my move and I haven't been able to unpack/rebuild it yet

The S2716DG is very nearly the same width (and pixel density) as the 25UM57. I bought a vertical dual monitor mount and have them stacked on top of one another, which works very well.

If that's so then how can they sell this? Isn't it pretty much the same principle?

I was thinking that I could incorporate a clamping system into the riser to secure it to the desk if any issues were to arise.

The Mount that i am using is from Amazon. Its from vivo

I bought it from vivo on amazon here

I use this stand from amazon which has my 34" ultrawide and 29" ultrawide.

Only complaint is you really have to tighten down the screw for the monitor tilt otherwise my 34" monitor because its so heavy will tilt down on its own.

https://www.amazon.com/gp/product/B01CUWJ0VK/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Here is my current setup. https://imgur.com/F8AOfAY

Right now, just a cheapo VIVO Amazon dual-vertical monitor stand.

This one in particular:

https://www.amazon.com/gp/product/B01CUWJ0VK/

It does well enough as long as your desk is sturdy so you're not shaking the monitors/stand. The base is heavy as hell (like very heavy, you can't move my stand + panels without "lifting it all"), but it's so tall that wobble will be inevitable if you're using a wobbly desk.

I've owned it for over 2 years now with zero issues holding 34" 21:9 panels. I can easily rotate/swivel them and they've never moved/dropped/whatever even a millimeter without me doing it.

I've also never had to re-tighten the "pole clamps", "arms", or mounts themselves.

The machining and general Q/C (uniformity) isn't perfect, but it's acceptable for a sub $75 free-standing dual + vertical mount that can hold massive panels.

I'm about 6'3" and it has about 1.5" of "pole-space" where the top panel could go higher. So, if you're over 6'5"...that may be a problem...

I don't have any recent or "finished" /r/battlestations style pictures, but I have a few from when I had first set it up after moving. So, ignore the messes...

• Old setup in 2016/2017 when I first got the mount (Dell S27 below):

https://imgur.com/QjtdKpq

• Mounting the new AW3418DW:

https://imgur.com/9FKaxgz

• After setting them up (dual 34" 21:9's):

https://imgur.com/YaJTawd

VIVO Dual LCD 13 to 32 inch... https://www.amazon.com/dp/B01CUWJ0VK?ref=ppx_pop_mob_ap_share

VIVO Dual LCD 13 to 32 inch Monitor Vertical Desk Stand, Free-Standing Mount for 2 Screens STAND-V002N

https://smile.amazon.com/dp/B01CUWJ0VK

https://www.amazon.com/dp/B01CUWJ0VK/ref=cm_sw_r_cp_apa_glt_fabc_NYYRAR27RYKQK1TSB295

>It's a Vivo V002N. It has a solid (and super heavy) base that sit on the desk and not a C-Clamp like most stands. It's quite sturdy and works really well. (
>
>https://www.amazon.ca/-/fr/gp/product/B01CUWJ0VK/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
>
>)

Same answer as the above commenter :)

It's a Vivo V002N. It has a solid (and super heavy) base that sit on the desk and not a C-Clamp like most stands. It's quite sturdy and works really well. (https://www.amazon.ca/-/fr/gp/product/B01CUWJ0VK/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1)

VIVO Dual LCD Monitor Vertical Desk Stand | Free-Standing Mount for 2 Screens up to 27 inches (STAND-V002N) https://www.amazon.ca/dp/B01CUWJ0VK/ref=cm_sw_r_cp_apip_OtCBMEv3UorAm

Might be a Vivo: https://www.amazon.ca/dp/B01CUWJ0VK/ref=cm_sw_r_cp_apa_hdPMzb587FHTH

https://www.amazon.com/dp/B01CUWJ0VK/ref=cm_sw_r_fm_apa_168.ybH654FWW

If you're going to stack them vertically you'll have to look at what stands work for you. This is the one that I'm using.