What is Reddit's opinion of
VIVO Dual Arm Monitor Desk Mount Height Adjustable, Tilt, Swivel, Counterbalance Pneumatic Stand, VESA Bracket Arm Fits Most Screens up to 27 inches STAND-V002O?
From 3.5 billion Reddit comments
By popularity on Reddit, this product is:
28 reviews of this product found across Reddit:
No, I used to have one just like that, and the center piece holds both arms together. I'm guessing you would need to combine two single arm mounts onto the same post in order to get the setup you've drawn. Or you could go for something like this https://www.amazon.com/dp/B01N2YFO5Z?psc=1&ref=ppx\_yo2\_dt\_b\_product\_details
The monitor arm I am using is called the "VIVO Dual Pneumatic Mount", mine is a few years old and they seem to have multiple variations. Mine looks similar to this one, but mine has USB ports which this one doesn't.
It's a cheap monitor arm I bought some years ago in Brazil. Very similar to this one.
However, if you plan to have a dual monitor setup, I would suggest to get two single arms to have more flexibility.
This is what I'm using for my X34P and XB270HU (27" 1440P). Works well, no complaints.
Thanks man, here’s the amazon link
Looks great man. Suggestion, try searching one with the word “gas spring”. These are arms that you can control separately. A link of something I found the other day: https://www.amazon.com/VIVO-Monitor-Adjustable-Counterbalance-STAND-V002O/dp/B01N2YFO5Z/ref=sr_1_3?crid=34YCLLG6NENLQ&keywords=dual+monitor+arm+gas+spring&qid=1552510226&s=gateway&sprefix=Dual+monitor+arm+ga%2Caps%2C196&sr=8-3 it’s also from VIVO.
I would go for a dual arm, so both are elevated and you can move them freely. VIVO makes some quality products.
VIVO Dual Monitor Height Adjustable Counterbalance Gas Spring Desk Mount Stand | VESA Bracket Arm Fits Most Screens 13" to 27" (STAND-V002O) https://www.amazon.com/dp/B01N2YFO5Z/ref=cm_sw_r_cp_api_cgnsAb9NFV7WV
I am using something like this monitor mount it is fully adjustable
Something like this could probably work. Just make sure to leave some slack with the cables to avoid things getting yoinked.
Sorry for the delay! The monitor arms are these ones from Amazon!
PS They also have them as dual arms.
https://www.amazon.com/dp/B01N2YFO5Z/ref=cm_sw_r_cp_api_glt_fabc_SN82B5FCNX64CQ5S9HR6?psc=1
I've had pretty decent luck with VIVO's stuff for monitor mounts. I haven't used this specific mount, but the single arm version works well enough for me.
Both monitors are mounted on this dual monitor arm; I've tried to position the screens so they can (somewhat) conceal the arm haha
I've used these for a couple years and love them. The clamp opens up pretty wide so I think it'd work on your desk: https://www.amazon.com/dp/B01N2YFO5Z/ref=cm_sw_r_cp_apa_i_isyKFbFTZDQAN?_encoding=UTF8&psc=1
Works very well for me, bought it when amazon sold it for $40
https://i.imgur.com/q4eu64A.jpg
​
It didnt add much to the clearance on the back around 2 inches to add the mount - the arms never go to the back in my case.
It’s a dual arm one from Vivo. I really dig it, it has built in cable management covers you can unscrew. Here’s the amazon link (non affiliate)
Ive got this one with 2 27" monitors on it.
​
It's solid. No chance of the mount coming off at all. Only thing, and this is because I have it attached to my VertDesk v3, is that when it's in standing mode, a small bit of the desk vibration works it's way up to the monitors. Not much, but there is a small bit of wobble when I type in standing mode.
If you’re gonna be adjusting them up and down, I’d recommend a double+ single Gas spring stand.
VIVO Dual Arm Monitor Desk Mount Height Adjustable, Tilt, Swivel, Counterbalance Gas Spring Stand | VESA Bracket Arm Fits Most Screens 13" to 27" (STAND-V002O) https://www.amazon.com/dp/B01N2YFO5Z/ref=cm_sw_r_cp_api_aNm-Bb2H5XTF3
If you’re just going to be raising and lowering the desk itself, then I’d just recommend a standard dual + single monitor stand.
Mount-It! Dual LCD Monitor Desk Mount Stand Heavy Duty Fully Adjustable Arms Fits 2 / Two Screens up to 27", VESA 75 and 100 (MI-752) https://www.amazon.com/dp/B0052AWGLE/ref=cm_sw_r_cp_api_tPm-Bb5XT45BR
Just so you know, that 18.7 is with the monitor stand. Your monitor's actually 14.1 pounds.
I'd go for this one from VIVO as it allows you to add in another monitor in the future, it's a gas spring so movement and quality is better, it's cheaper, and supports 14.3 lb. on each mount.
Sorry, this is the one I got. Gas spring, not gas powered.
Monitor mounts, like arms.
Like these: https://www.amazon.com/VIVO-Monitor-Counterbalance-Universal-STAND-V002O/dp/B01N2YFO5Z
The dual monitor mount:
https://www.amazon.com/gp/product/B01N2YFO5Z
The single monitor mount:
https://www.amazon.com/gp/product/B00EQ7HTG6
If you're going to get one for the X34, you're going to need one that can handle more weight. For 27" though, the single and dual should work.
Popular alternatives to VIVO Dual Arm Monitor Desk ...
VIVO Dual Monitor Desk Mount, Heavy Duty Fully Adjustable Stand, Fits 2 LCD LED Screens up to 30 inches, Black, STAND-V002
Amazon Basics Single Monitor Stand, Lift Engine Arm Mount, Black
