What is Reddit's opinion of VIVO Extra Tall Vertically Stacked Dual Monitor Desk Mount Stand with 39 inch Stand-up Pole, Fully Adjustable Extended Arms, Fits 2 Screens up to 27 inches, STAND-V012T?

From 3.5 billion Reddit comments

https://www.amazon.com/dp/B083G8GDGD/ref=cm_sw_r_cp_apa_i_11N-FbFM1NQM2?_encoding=UTF8&psc=1

I've actually got two of these. I previously had 4 1080p monitors set up here - some for my work laptop and the others for my PC. The laptop didn't allow for everything to line up evenly so these worked well. I'll add a second or maybe 3rd monitor this week and I think it'll work alright. They're sturdy and I don't have any complaints.

Yes, i'm using a Vevo brand vertically stacked dual monitor desk mount. Here's the Link ,I purchased it from Amazon. How do you have yours setup right now?

VIVO Extra Tall Vertically Stacked Dual Monitor Desk Mount Stand with 39 inch Stand-up Pole, Fully Adjustable Extended Arms, Fits 2 Screens up to 27 inches, STAND-V012T https://www.amazon.ca/dp/B083G8GDGD/ref=cm_sw_r_apan_i_8BG55XBKG45DSQPZFQR6

This is what I use. I have a second arm though for my lower monitor so I can swing it around a little more. But this holds my to monitor fine.

Sorry for the late response VIVO Extra Tall Vertically Stacked Dual Monitor Desk Mount Stand with 39 inch Stand-up Pole, Fully Adjustable Extended Arms, Fits 2 Screens up to 27 inches, STAND-V012T https://www.amazon.com/dp/B083G8GDGD/ref=cm_sw_r_cp_api_gl_i_DZMCW604BZ584Q9GT84A?_encoding=UTF8&psc=1 this is the mount

I use this one. It okra well, but if yo hang both monitors way off to one side it does lean a bit, I imagine more so with a 46” monitor.

VIVO Extra Tall Vertically Stacked Dual Monitor Desk Mount Stand with 39 inch Stand-up Pole, Fully Adjustable Extended Arms, Fits 2 Screens up to 27 inches, STAND-V012T https://www.amazon.com/dp/B083G8GDGD

I don’t know if any that work like the setup show but I use this to life my Ultrawide over my normal monitors if that helps:

VIVO Extra Tall Vertically Stacked Dual Monitor Desk Mount Stand with 39 inch Stand-up Pole, Fully Adjustable Extended Arms, Fits 2 Screens up to 27 inches, STAND-V012T https://www.amazon.com/dp/B083G8GDGD/ref=cm_sw_r_cp_api_i_CZ7Y2YWD2VSJK7N0XKCT?_encoding=UTF8&psc=1

It supports the weight of my LG Ultrawide w no issues but at the same time it’s not really the mounting style you’re looking for but hopefully you find something that fits your style :)

I've been using the below to stack my XB270HU on top of my X34S and it's been perfect so far. I didn't need to move my monitors vertically, so being able to lock them at a fixed height has worked for me.

I really only use my top monitor for Discord and MSI Afterburner (I have the full monitor up at all times monitoring CPU usage, temp, GPU usage temp, etc..)

https://smile.amazon.com/dp/B083G8GDGD?ref_=cm_sw_r_cp_ud_dp_T1_F6WWQ6R6GQ3FBG6KP801

I use a dual vertical monitor mount, one for each monitor. It's like a single one, except taller.

Here's one from Amazon that is similar to mine (not identical though, also I don't live in the US): link

probably this one

amazon [dot] com/VIVO-Vertically-Stand-up-Adjustable-STAND-V012T/dp/B083G8GDGD/ref=mp_s_a_1_9?crid=1RIW23WKFRWZZ&keywords=vivo+dual+monitor+arm+desk+mount&qid=1644429269&sprefix=vivo+dual+monitor+arm+desk+nount%2Caps%2C168&sr=8-9

this one I believe:

https://smile.amazon.com/VIVO-Vertically-Stand-up-Adjustable-STAND-V012T/dp/B083G8GDGD/ref=sxin_14_pa_sp_search_thematic_sspa?crid=1HPP82BH4VTQK&cv_ct_cx=vivo+tall+monitor+stand&keywords=vivo+tall+monitor+stand&pd_rd_i=B083G8GDGD&p...

It's the one I use.

VIVO Extra Tall Vertically Stacked Dual Monitor Desk Mount Stand with 39 inch Stand-up Pole, Fully Adjustable Extended Arms, Fits 2 Screens up to 27 inches, STAND-V012T https://www.amazon.com/dp/B083G8GDGD/ref=cm_sw_r_apan_glt_i_WHS0TDXFWF9SHD0NBJNK this is the one I use for almost that exact set up. Rock solid and doesn't budge when I move my desk or anything. Not super feature rich but it does it's job well 5 stars all day from me.

This one is the one I use: https://smile.amazon.com/VIVO-Vertically-Stand-up-Adjustable-STAND-V012T/dp/B083G8GDGD/ref=sxin_14_pa_sp_search_thematic_sspa?crid=1HPP82BH4VTQK&cv_ct_cx=vivo+tall+monitor+stand&keywords=vivo+tall+monitor+stand&pd_rd_i=B083G8GDGD&p...

A Vivo stack monitor stand. Both monitor on the same rig. I take it on amazon. Mount

https://www.amazon.com/VIVO-Vertically-Stand-up-Adjustable-STAND-V012T/dp/B083G8GDGD/ref=sr_1_6?keywords=double+monitor+mount+vertical&qid=1639251293&sr=8-6

It's not an adjustable gas piston type mount, but I noticed my monitors would slowly sag using one of those because of the weight. Picked this because it's a fixed type (you can adjust the arms a little bit, but you probably will just find your preferred location and keep it there) and neither monitor has sagged or dipped during my time.

The left monitor on the side I'm just using a single gas type adjustable type since it's light.

I am using this one

The cables are not hidden but the cable management functionalities do a pretty good job at running the cables along the arms and the pole.

Sure

Although I would recommend the grommet option.

I'm using the below to stack my XB270HU on top of my now current X34s (had X34P before).

This clamps to the desk securely, I didn't need anything that needed being adjustable beyond the initial setup, so this one is perfect for my needs.

https://smile.amazon.com/gp/product/B083G8GDGD/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1

I'm using this to stack my 27" above my 34". There's plenty of height to adjust everything higher if I like. Like, probably another 12"-16" to go up if I so choose.

https://smile.amazon.com/gp/product/B083G8GDGD/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1

Extremely high desk-mounted pole thingee with two arms. I mixed/matched parts from a few different mounts, you could probably buy something similar pretty easily, though (like this).

I used this mount to mount both of them: Link

I'm using this to stack a 27" on top of my X34P:

https://smile.amazon.com/gp/product/B083G8GDGD/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1

Just have to tighten the screws down a little more on the X34P in order to have it stay put. Haven't had any issues with this since I've had it.

I'm using the VIVO Extra Tall mount which probably wouldn't work in your case since it doesn't have free vertical movement. You set it to the height you want it at and then secure it. From there you can only really move the monitors in or out.

A dual Ergotron might work depending on whether you're okay with the pricetag and whether it has enough clearance to move your monitors around. From a quick Amazon search it looks like the LX Dual Stack is what you're considering? If it doesn't work then maybe consider two individual gas mounted arms? One that you can mount low and another that has more vertical reach that allows you to move it up and out of the way while you work on your drawing tablet. I'd measure the vertical heights of your tablet and monitor then consider it alongside the mounting height, arm length, max arm height, etc.. get real technical with it.

Got an AW3418DW stacked on an AW3420DW with a single mount and it's been working well.

https://www.amazon.com/dp/B083G8GDGD/

They wobble a bit if I bump the desk hard, but they are both under the weight limits for each arm. No height adjust sadly.

I'm using this one for my 34" ultrawide on the bottom. https://smile.amazon.com/gp/product/B083G8GDGD

I have plenty of space between the two monitors. In fact, I should probably drop the top one down a bit because I can't really see my posters and artwork on the walls behind my desk anymore.

Thanks! I am using a vivo dual vertical mount from Amazon. This one here https://www.amazon.com/dp/B083G8GDGD

The top monitor is an Acer predator X34P 34 inch ultrawide, bottom is an Alienware 3821dw 38inch ultrawide.

https://www.amazon.com/gp/product/B083G8GDGD/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

This one but it doesn't support the G9. It supports the 32 inch Dell just fine tho.

The ultrawide is mounted to the wall with a cheap mount, the other two are on this mount.

The ultrawide is mounted to the wall, the other two are on this mount.

I'm using VIVO's brand.

VIVO Extra Tall Vertically... https://www.amazon.com/dp/B083G8GDGD?ref=ppx_pop_mob_ap_share

Thanks. I use This VIVO mount from Amazon working great so far!

Plan on wall mounting the G9 soon, so stock stand there. I am using this dual monitor arm without the bottom arm mounted for wayyy more height than you would get with a "tall" monitor arm.

I have a vivo tall pole from amazon that holds them both really well. This one here https://www.amazon.com.au/VIVO-Vertically-Stand-up-Adjustable-STAND-V012T/dp/B083G8GDGD/ref=sr_1_3?

i used this

works well for me. maybe just use a single mount for the vertical screen.

Thank you! I'm using a vertical monitor mount to stack two 27" screens.

I finished a dual-stacked setup. I used these products:

• OWC Thunderbolt Dock: https://www.owcdigital.com/products/thunderbolt-dock
• VIVO Extra Tall Vertically Stacked Dual Monitor Desk Mount https://smile.amazon.com/dp/B083G8GDGD - I'm only using one arm for the top monitor and the original stand for the bottom.

While you're at it, you can remove an 'a' and 'o' from amazon.com.... https://amzn.com/dp/B083G8GDGD

Just found out you can even shorten it further! Just eliminate the product name: https://amazon.com/dp/B083G8GDGD/

;)

Wow! That will be some heavy lifting for the monitor mount.

I have a 27 and 22 inches stacked vertically, the 27 at the bottom. They are not even on the same monitor mount (it's complicated).

The 27 inches is about 6 inches from the desk, and the 22 inches requires at least a 16-17 inches pole to be able to stack on top of the 27.

You will probably have to buy a few monitor mount and do some mix and match if you require more freedom. (I bought a tall monitor mount - not tall enough to my liking - and bought a dual monitor stand with pneumatic arms)

this might be a good starter:
https://www.amazon.ca/VIVO-Vertically-Stand-up-Adjustable-STAND-V012T/dp/B083G8GDGD/ref=sr_1_8?keywords=vivo+tall+monitor+arm&qid=1642173186&sprefix=vivo+tall+%2Caps%2C68&sr=8-8

it's rated for 20lbs/monitor, but you'll have to see if you have enough clearance for the 34".

https://www.amazon.com/gp/product/B083G8GDGD/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

​

If I remember correctly the stands are not about how much the stand can hold based on the width of the monitor but pretty much how much your monitors weigh and if the stand can properly hold them. It also depends on the strength of your desk as well.

Funny enough the scene is called Nemo! The mount is a simple frankensteined Vesa mount with a tripod head: https://www.amazon.ca/dp/B083G8GDGD

 

^Item Info | Bot Info | Trigger

 

^Item Info | Bot Info | Trigger

 

^Item Info | Bot Info | Trigger

That mousepad was custom made. Then that monitor mount is from VIVO. here

 

^Item Info | Bot Info | Trigger

 

^Item Info | Bot Info | Trigger

 

^Item Info | Bot Info | Trigger

 

^Item Info | Bot Info | Trigger

 

^Item Info | Bot Info | Trigger

 

^Item Info | Bot Info | Trigger

 

^Item Info | Bot Info | Trigger

 

^Item Info | Bot Info | Trigger

Its dual vertical mount from VIVO here

I'm using the following to vertically stack my 27" above my 34". Not sure if it would work for you.

https://smile.amazon.com/gp/product/B083G8GDGD/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1

It's this one: https://www.amazon.ca/dp/B083G8GDGD/ref=cm_sw_r_apan_glt_i_KJS09MJKEW2SYW7MJAZ5?_encoding=UTF8&psc=1

I searched around because I needed something to get over my 48" and this fit the bill.

You can use this

https://www.amazon.com/-/es/VIVO-escritorio-verticalmente-extendidos-STAND-V012T/dp/B083G8GDGD/ref=sr_1_10?__mk_es_US=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=vertical+mount&qid=1632779439&sr=8-10

​

The C148 is 24.3" tall and the LG 38WN is 15.5" tall, since the vesa mount is at the middle aprox. a 32" arm mount is needed, that has 39", more than enough.

The question is the weight, C1 is 32.8 lbs and 38 is 14.2 lbs, both without stand but the arm supports 44 lbs; those 3 lbs shouldn't be an issue.

This one

I use this: https://www.amazon.com/gp/product/B083G8GDGD/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

​

It mounts my two 34" ultrawide curved montiors no problem!

I use this: https://www.amazon.com/gp/product/B083G8GDGD/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

​

it works really well for my 2 34 inch ultrawide curved monitors.

https://www.amazon.com/dp/B083G8GDGD/ref=cm_sw_r_cp_apap_4xisNZzsyQ4Az

I'm using this with an XB270HU and an X34P.

https://smile.amazon.com/gp/product/B083G8GDGD/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1

How adjustable do you need it? I bought and am using this since late last year:

https://smile.amazon.com/gp/product/B083G8GDGD/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1

I have an X34 and an XB270HU on it currently.

I'm using this mount to put 2 displays over my ultrawide.

https://www.amazon.com/gp/product/B083G8GDGD

https://smile.amazon.com/gp/product/B083G8GDGD/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I just mounted my monitors to this:

https://www.amazon.com/gp/product/B083G8GDGD/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

Works pretty well.

This mount from amazon. https://www.amazon.com/dp/B083G8GDGD/ref=cm_sw_r_cp_apap_mwvWmHIDbfns5

https://www.amazon.com/dp/B083G8GDGD/ref=cm_sw_r_cp_apa_i_BZLtFbN9E8CK9

I only used two of the three poles as my 24" didn't need the third, but if I go bigger on top, I have more room

https://www.amazon.com/dp/B083G8GDGD/ref=cm_sw_r_cp_apa_i_BZLtFbN9E8CK9

I only used two of the three vertical poles