What is Reddit's opinion of VIVO Heavy Duty Adjustable Under-Desk PC Mount Computer Case Holder Supports up to 66 lbs, MOUNT-PC04A?

From 3.5 billion Reddit comments

I'm using a VIVO mount that's designed to hold heavier PCs. It's mounted squarely, and to hold it solid I screwed it in through 1.5" of solid wood on the bottom of the desk and .75" solid wood on top. It's holding very firm, no tilt or lean to it, and bearing the 30 lbs of my pc pretty easily.

I had the same concerns. Picked up a VIVO Heavy Duty Mounting Bracket that fits my heavy ATX PC.

I didn't want to leave the PC on the ground because as the desk rises, I was concerned about the desk pulling some of the cords on the desk out of the pc or even lifting the pc up from behind.

The mount is underneath the desk, just on the inside of the Jarvis frame. I added solid wood on both sides of the desk, glued and fixed them to the desk & mounting plate with 3 1/4" construction screws and it holds very solid. You could probably mount the PC underneath without the extra wood but I played it safe and am glad I did.

Let me know if you have any questions about mounting into an IKEA tabletop!

Yup, it's also vivo branded. I got this one since it fits the demensions of my case (and much larger cases too) and supports up to 66lbs which is way more than I would need one of these to support lol.

Here is the link: https://www.amazon.com/gp/product/B07DWKHWPB/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

That's why you do what I did - get a bracket that mounts to the bottom of your desk and holds the computer. Keeps it off the floor without taking up desk space.

Thanks for the details. Awesome you love it.

I bought a 3/8 Power Drill. Just have the included screw bit, so I'm hoping that works out...

I purchased x1 CPU holder, but I'm open to more if it makes sense, not really sure I NEED to mount these though since they are just going to set up against a wall behind the desk anyways if I don't....we'll see... I wouldn't want the NAS moving around anyway what with all the drives spinning inside of it, but maybe the UPC I could mount eventually...with this one perhaps: https://www.amazon.com/gp/product/B07DWKHWPB/ref=ox\_sc\_act\_title\_2?smid=A3W3STWCK1O3NR&psc=1

I ordered my desk with:
1. x1 60" and x1 30" cable mesh thing,
2. The advanced wire management kit.
3. Dual 28" modesty panels for both edges
4. 60" mesh for the back of the return portion on the right, although that one is back-ordered until mid-March which sucks, I would have gotten the main 78" modesty panel, but it was backordered until something ridiculous like August)
5. x1 cable channel for one of the legs.
6. Desk hooks
7. Advanced control panel

...so I think I will have plenty of places to manage wires...I didn't want to skimp on that at all...

I bought it separately. It's this one on Amazon.

VIVO Heavy Duty Adjustable Under-Desk PC Mount Computer Case Holder Supports up to 66 lbs, MOUNT-PC04A https://www.amazon.com/dp/B07DWKHWPB/ref=cm_sw_r_apan_glt_i_200MQD8JAA2AHSDKWH6G?_encoding=UTF8&psc=1

The tower takes up too much space on your desk... I'm not sure how your desk is from the bottom, but if you have spare cash to spend and you have enough room at the bottom of your desk, you should invest in a under-desk pc mouth like this one:

https://www.amazon.com/VIVO-Adjustable-Under-Desk-Computer-MOUNT-PC04A/dp/B07DWKHWPB/ref=sr\_1\_1?dchild=1&keywords=computer+under+desk+mount&qid=1635391779&sprefix=Computer+under%2Caps%2C99&sr=8-1

That looks awesome! My only suggestion is get one of these to hang your PC under your desk and get it off the carpet:

VIVO Heavy Duty Adjustable Under-Desk PC Mount Computer Case Holder Supports up to 66 lbs, MOUNT-PC04A https://www.amazon.com/dp/B07DWKHWPB/ref=cm_sw_r_apan_glt_fabc_A0D1A9419BBXFXFHH0MJ?_encoding=UTF8&psc=1

That would be this: https://www.amazon.com/VIVO-Adjustable-Under-Desk-Computer-MOUNT-PC04A/dp/B07DWKHWPB

My case is all tempered glass and its held up fine. Ive had that mounted there for over a year now with 0 issues. Highly recommend. It allows me to flaunt my tower and save space on my desk.

For your PC, thank me later. I've had a PC under my Uplift sit/stand desk for over 4 years with an under-desk mount and never had an issue. The one I linked is the most recent one I've been using since I went full ATX and got a bigger case (Phantek P500a)

Maybe under mount the pc to the underside of the desk that way you have more surface area? Somethin like this?

I have the 72in Husky workbench and between my tower, 2 27" monitors, and 2 bookshelf speakers, I'm maxed out on space, but I have nothing left to add so I'm happy.

If you want another suggestion besides a drawer, since you have a solid desk top, I had a lot of success with a under-desk mount. This one: https://www.amazon.com/gp/product/B07DWKHWPB. I ended up stopping using it because I wanted my PC on my desk for aesthetics but it was a great option.

this might help Amazon

I have the O11D XL, which is slightly thicker than this can accommodate. But it should work fine for the non-XL.

I just got this one based on recommendations from this subreddit. Haven't installed it yet as it just came, but I also have a Meshify C and this holder has it within the parameters with room to spare.

https://smile.amazon.com/gp/product/B07DWKHWPB/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1

I got this one but had to order from Amazon.ca (via ReShip). Has not arrived yet, but was the best reviewed one I could find that was wide enough for my 9" case. Not sure why, but does not seem to be available from anyone in the U.S.

https://www.amazon.com/VIVO-Adjustable-Under-Desk-Computer-MOUNT-PC04A/dp/B07DWKHWPB

It's a "VIVO Heavy Duty Adjustable Under-Desk PC Mount Computer Case Holder" that I bought from Amazon: https://www.amazon.com/gp/product/B07DWKHWPB/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

This was one of the few (only?) case mounts that would support the wide meshify case. All of the other less expensive mounts I found were not rated to support the size of the meshify.

The VIVO mount thing is super solid and I'm really happy with it so far.

It is not. Its VIVO heavy duty mount https://www.amazon.com/VIVO-Adjustable-Under-Desk-Computer-MOUNT-PC04A/dp/B07DWKHWPB

https://www.amazon.com/dp/B07DWKHWPB?ref=ppx_pop_mob_ap_share

This is what I have

https://www.amazon.com/VIVO-Adjustable-Under-Desk-Computer-MOUNT-PC04A/dp/B07DWKHWPB

I screwed this into my 60x30 Jarvis top and it's been holding a pretty heavy Cooler master H500 case since December -- seems completely solid. https://www.amazon.ca/dp/B07DWKHWPB

The unstable holder was the one that I bought from BTOD. It was so unstable, that I needed to use that awful blue strap in order to prevent the CPU from falling out. I returned that holder and purchased the VIVO CPU holder from Amazon. VIVO Heavy Duty Adjustable... https://www.amazon.com/dp/B07DWKHWPB?ref=ppx_pop_mob_ap_share VIVO CPU Holder

makes me cringe... just get one these metal under the desk mounts like the one below.

https://amazon.com/VIVO-Adjustable-Under-Desk-Computer-MOUNT-PC04A/dp/B07DWKHWPB

I just recently mounted one of these to my standing desk. So far works great. I've got an NZXT S340 PC case for size comparison:

https://www.amazon.com/VIVO-Adjustable-Under-Desk-Computer-MOUNT-PC04A/dp/B07DWKHWPB

>https://smile.amazon.com/gp/product/B07DWKHWPB/ref=ppx\_yo\_dt\_b\_asin\_title\_o01\_s01?ie=UTF8&psc=1

good luck finding the VIVO in stock !!

>https://www.amazon.com/VIVO-Adjustable-Under-Desk-Computer-MOUNT-PC04A/dp/B07DWKHWPB/

did thread so not expecting a reply, but did you mount that straight to table? or did you need the uplift "track spacers" ?

Yes, I have been using this one since I posted the comment about a year ago. Works amazing.

VIVO Heavy Duty Adjustable Under-Desk PC Mount Computer Case Holder Supports up to 66 lbs, MOUNT-PC04A https://www.amazon.com/dp/B07DWKHWPB

Here you go. This fits more pc case sizes.

https://www.amazon.com/dp/B07DWKHWPB?ref=ppx\_pop\_mob\_ap\_share

Uplifts version wouldn’t suit my case size (next h10) so I ordered this. Works really well!

https://www.amazon.com/dp/B07DWKHWPB?ref=ppx_pop_mob_ap_share

i think it's this. https://www.amazon.com/VIVO-Adjustable-Under-Desk-Computer-MOUNT-PC04A/dp/B07DWKHWPB/

I have something similar, got this on amazon.

Hear me out - PC mounted to the bottom of the desk. Doesn't take up desk space, also not on the floor.

yes i am super happy with it , i have a pretty huge PC and it fits perfectly , here's the link : VIVO MOUNT-PC04A Support de PC... https://www.amazon.ca/dp/B07DWKHWPB?ref=ppx_pop_mob_ap_share

that's the case mount:
https://www.amazon.com/dp/B07DWKHWPB?psc=1&ref=ppx_yo2ov_dt_b_product_details

i connect the PC with a DP to the monitor, and the laptop with HDMI to the monitor

and use a simple USB switcher with a link usb extender so I have camera, keyboard, sound card, mouse, headset and etc connected to that

I don't remember which brand, but it's not lian li
that's the case holder:
https://www.amazon.com/dp/B07DWKHWPB?psc=1&ref=ppx\_yo2ov\_dt\_b\_product\_details

What I did with my standing desk was I got an under desk mount for my PC.

https://www.amazon.com/dp/B07DWKHWPB

This way my cable lengths don't have to change as the desk goes up and down.

https://www.amazon.com/VIVO-Adjustable-Under-Desk-Computer-MOUNT-PC04A/dp/B07DWKHWPB/ref=sr\_1\_3?crid=5UZO1X2R7L0Y&keywords=vivo+cpu+holder&qid=1642695612&sprefix=vivo+cpu+holder%2Caps%2C59&sr=8-3

If you do get a case holder, get this one https://www.amazon.com/VIVO-Adjustable-Under-Desk-Computer-MOUNT-PC04A/dp/B07DWKHWPB/ref=sr_1_3?crid=5UZO1X2R7L0Y&keywords=vivo+cpu+holder&qid=1642695612&sprefix=vivo+cpu+holder%2Caps%2C59&sr=8-3

The uplift one is fairly limited if you have even a medium size case.

Grommets are plasticky. I thought about that but wanted a cleaner desk space than cords being plugged in.

I have an L-Shaped desk and use this mount with my large-ish case. Been using it for more than a year, no problems.

https://www.amazon.com/VIVO-Adjustable-Under-Desk-Computer-MOUNT-PC04A/dp/B07DWKHWPB

Pc mount under desk

VIVO Heavy Duty Adjustable Under-Desk PC Mount Computer Case Holder Supports up to 66 lbs, MOUNT-PC04A https://www.amazon.com/dp/B07DWKHWPB/ref=cm_sw_r_cp_api_glt_fabc_5285TKHBS1A17X4HXS8T?_encoding=UTF8&psc=1

I don’t know if you’ll find it (I’m from Spain), but here it is:

https://www.amazon.es/dp/B07DWKHWPB/ref=cm_sw_r_cp_api_glt_i_4NDF46DRQ8MDZ1YV24P6?_encoding=UTF8&psc=1

For the monitor arm I went with the one from fully:

https://www.fully.com/en-eu/jarvis-monitor-arm-1.html

 

^Item Info | Bot Info | Trigger

 

^Item Info | Bot Info | Trigger

 

^Item Info | Bot Info | Trigger

 

^Item Info | Bot Info | Trigger

been ordered: https://www.amazon.com/dp/B07DWKHWPB/

already done, adn this has been ordered:https://www.amazon.com/dp/B07DWKHWPB/

 

^Item Info | Bot Info | Trigger

 

^Item Info | Bot Info | Trigger

Oops! That would be this one! https://www.amazon.com/VIVO-Adjustable-Under-Desk-Computer-MOUNT-PC04A/dp/B07DWKHWPB

https://www.amazon.com/VIVO-Adjustable-Under-Desk-Computer-MOUNT-PC04A/dp/B07DWKHWPB/ref=mp_s_a_1_3?dchild=1&keywords=vivo+under+desk+mount&qid=1631340632&sr=8-3

Has been holding my PC up for years and the screws are only 3/4” thick.

I got this Vivo mount: https://smile.amazon.com/gp/product/B07DWKHWPB/

I have it set perfect enough where the clamp on the left side doesn't block the mesh side panels and leaves it with a ton of space on top for my two exhaust fans.

This is what I use.

https://www.amazon.com/dp/B07DWKHWPB/ref=cm_sw_r_cp_apa_glt_fabc_APY3C9FR68HEJCTKFXH4

https://www.amazon.com/dp/B07DWKHWPB?ref=ppx_pop_mob_ap_share

You'll have to convert CM to Freedom Units to see if it fits, but I've been very happy with this one: https://www.amazon.com/VIVO-Adjustable-Under-Desk-Computer-MOUNT-PC04A/dp/B07DWKHWPB

These are amazing and they're rated for 50lbs.

https://www.amazon.com/dp/B07DWKHWPB/ref=cm_sw_r_cp_apa_glc_fabc_KQHA3683SV0MBTWT5JY3?_encoding=UTF8&psc=1

I have one suspending a 2012 classic Mac Pro desktop that weighs 48lbs.

It's amazing to get your PC off the sit stand desk or save your wires from getting stretched while standing or creating a tangled mess when sitting.

I attached a power strip to the bottom of my desk and everything plugs in there leaving only 1 wire coming off my desk.

https://www.amazon.com/dp/B077T2ZZHW/ref=cm_sw_r_cp_apa_glc_fabc_2JERKTS39K2AGYA4HM3G?_encoding=UTF8&psc=1

All the wires are hidden under the desk with these:

https://www.amazon.com/dp/B07Q9QN4J8/ref=cm_sw_r_cp_apa_glc_fabc_JPMCKYJG57M06RCHWTJJ?_encoding=UTF8&psc=1

Dual monitor mount:

https://www.amazon.com/dp/B07HFK16H8/ref=cm_sw_r_cp_apa_glc_fabc_THHJ45M2P2NCK0CE7J1F?_encoding=UTF8&psc=1

Get a good ergonomic chair and you'll thank yourself.

Thanks. I used this mount

Why not just buy a holder from somewhere else? Like this one, which supports cases 10 inches wide: https://smile.amazon.com/gp/product/B07DWKHWPB/ref=ox_sc_saved_title_2?smid=A3W3STWCK1O3NR&psc=1

Get a PC mount that attaches under the desk, like this: https://www.amazon.com/dp/B07DWKHWPB/ref=cm_sw_r_cp_api_glc_fabc_dRR7Fb73JNB8P

You hit the max of this one but it might work:

VIVO Heavy Duty Adjustable Under-Desk PC Mount Computer Case Holder Supports up to 66 lbs, MOUNT-PC04A https://www.amazon.com/dp/B07DWKHWPB

Or, there’s this one which would fit:

VIVO Under-Desk and Wall Mount PC Adjustable Strap and Steel Bracket Holder, Computer Case Carrier, Black, MOUNT-PC02S https://www.amazon.com/dp/B078JXC9X8

Both have good ratings.

I'm getting this for my gaming station that's about 60lbs.

VIVO Heavy Duty Adjustable Under-Desk PC Mount Computer Case Holder Supports up to 66lbs (MOUNT-PC04A)

This one from Vivo and yes that is a Meshify C.

Amazon. It was not difficult to install at all, just have to make sure your table top is solid wood and not particle board.

Just ordered my first standing desk. After looking through a bunch of posts here and elsewhere, these are the accessories I've ordered so far.

CPU Mount (had to get from Amazon.ca):

https://www.amazon.com/VIVO-Adjustable-Under-Desk-Computer-MOUNT-PC04A/dp/B07DWKHWPB

Under Desk Wiring Stuff:

https://www.amazon.com/gp/product/B07GLZZ2RZ/

https://www.amazon.com/gp/product/B07H48SY8G/

https://www.amazon.com/gp/product/B07YV2TT44/

https://www.amazon.com/gp/product/B0154MS9Q0/

Power Stuff:

https://www.standupdeskstore.com/powerup-desktop-charging-station-2

https://www.amazon.com/gp/product/B089SPWMW8/

Try amazon smile to donate to a charity of your choice automatically at no cost to you!
https://smile.amazon.com/VIVO-Adjustable-Under-Desk-Computer-MOUNT-PC04A/dp/B07DWKHWPB
^^^I'm ^^^a ^^^bot ^^^and ^^^this ^^^action ^^^was ^^^performed ^^^automatically.

VIVO Heavy Duty Adjustable... https://www.amazon.com/dp/B07DWKHWPB?ref=ppx_pop_mob_ap_share

https://www.amazon.ca/dp/B07DWKHWPB?ref=ppx_pop_mob_ap_share

What I did was glue a large piece of 3/4" plywood under the desk to have something solid to screw into using silicone. My monitor stand clamps onto that to distribute the weight and add a second way of holding the plywood up. The PC holder is a VIVO brand stand I bought off of Amazon to keep the PC off the ground and easy to cable manage as it moves with the desk

Here is the mount I bought: https://www.amazon.ca/dp/B07DWKHWPB?ref=ppx_pop_mob_ap_share

And here are the caster wheels: https://www.amazon.ca/dp/B086HDKK85?ref=ppx_pop_mob_ap_share

This is the mount I have

Thanks! Its this Vivo mount from amazon.

Its a Vivo under-desk PC mount

Im using this! Vivo under-desk PC mount

Are you married to that window?

​

But seriously, if you're dead set on your displays taking up more horizontal real estate you have two options:

1. Move your tower vertically, either up on the wall or under the desk. You don't have to sit in on the floor, you just need something like one of these https://www.amazon.com/VIVO-Adjustable-Under-Desk-Computer-MOUNT-PC04A/dp/B07DWKHWPB that fits your case.
2. Move your tower horizontally, by annexing that desk to the right.