What is Reddit's opinion of WALI Premium Single LCD Monitor Desk Mount Fully Adjustable Gas Spring Stand for Display 17-32 inch, 17.6lbs Weight Capacity GSDM001?

From 3.5 billion Reddit comments

This is the one I use.

WALI Premium Single LCD Monitor Desk Mount Fully Adjustable Gas Spring Stand for One Screen up to 32 inch, 17.6lbs Weight Capacity (GSDM001), Black https://www.amazon.com/dp/B0779JSRH5/ref=cm_sw_r_cp_api_glt_fabc_WY798QAD39VWB3B854VS?_encoding=UTF8&psc=1

https://www.amazon.com/WALI-Premium-Adjustable-Capacity-GSDM001/dp/B0779JSRH5

That's what you need - just make sure the back of the monitor has the 4 VESA holes towards the middle (it should) and remove the wimpy wimpy wimpy stand on the bottom of it. I don't think your PC monitor is bigger than 32" as far as I can tell.

Long term goals would be to get a good USB webcam and a logitech unifying mouse/keyboard, and then you could just run without having to worry about your integrated webcam. But that's back burner stuff.

This is the arm I use - I have it installed to the side of my desk, and the monitor can swing over as I need it. I don't know how wide your desk is, however, so that might be impractical to use as well.

I can't speak to the pixel density vs the 24" though as that wasn't a factor when I was buying one. I really needed a 32" as I did a lot of working from home when I got it and I was doing a lot of open files and windows. G-Sync support + 165Hz was a bonus. :)

some campers dont have brackets for tv. mine is a 2011 and doesn't have one. try a desk monitor bracket on the edge of the countertop with something to protect the top of the counter. one that mounts vertically up from the counter using that small gap at the edge of the counter to clamp it down. should fit a smaller tv like that up against the wall.

​

something like this mount https://www.amazon.com/WALI-Premium-Adjustable-Capacity-GSDM001/dp/B0779JSRH5/ref=sr\_1\_5?crid=35RXSTJL5T3ZA&keywords=tv+desk+mount&qid=1654727562&smid=A2K3WARBVMJ9U9&sprefix=tv+desk%2Caps%2C70&sr=8-5

Looks incredibly similar to this one I bought from Amazon a couple months ago. Mind you, I paid $25, not the $40 it's currently listed for.

It's been pretty great so far. I'm using it as a third monitor stand above my second monitor. No wobbling of any sort, it's rock solid.

I can't relocate the mount for the middle monitor, but the other 2 are using this one: WALI Premium Single LCD Monitor Desk Mount Fully Adjustable Gas Spring Stand for Display 17-32 inch, 17.6lbs Weight Capacity GSDM001 https://www.amazon.com/dp/B0779JSRH5/ref=cm_sw_r_apan_glt_fabc_62B1BWTSBCVTND0X95RV?_encoding=UTF8&psc=1

A good secondary solution would be getting two single arm mounts. I'm also a tall guy and wanting two high sitting monitors was a big preference. I personally recommend these WALI mounts since they have arms that branch off of what are basically pipes to increase height

I have two of these and they work fine. I'd be concerned about your desk being able to handle it if it's made of particleboard or that honeycomb cardboard. Maybe use some pieces of wood under the clamps to spread out the weight.

Hey mate, I'm using 2 for the reason you just mentioned. The 49 inch Samsung is on an Amazon Basics Monitor arm. I had to make a small modification to the tilt functionality due it not being able to support the weight. The 34 inch dell is on an arm I picked up on Amazon as well for like 40 bucks. I got that one because it allows for the height i needed to clear the 49 inch. Althoigh i wisg it was a bit taller. The Amazon basics arm is the only affordable arm I found that can support the weight. It's a fantastic arm and costs about 100 bucks. A lot cheaper than something like an ergotron hx. Unfortunately it looks like the Amazon basics arm is currently not available. Which is a shame. But here is a link for the other arm.

WALI GSDM001 Premium Single LCD... https://www.amazon.com/dp/B0779JSRH5?ref=ppx_pop_mob_ap_share

I like this good and cheap one from Amazon. Be sure to tighten the tension on the head for it to hold the tilt up if you go for it.

https://www.amazon.com/WALI-Premium-Adjustable-Capacity-GSDM001/dp/B0779JSRH5/ref=mp_s_a_1_6?keywords=monitor+arm&qid=1569389787&sprefix=monitor&sr=8-6

I haven't tried it with that monitor but I have this arm mount and love it, great price too. I've used it with a C27HG70 and PG279Q

WALI Premium Single LCD Monitor Desk Mount Fully Adjustable Gas Spring Stand for Display up to 32 inch, 17.6 lbs Capacity (GSDM001), Black https://www.amazon.com/dp/B0779JSRH5/ref=cm_sw_r_cp_apa_i_HjT-DbSGNBDP6

Really, if you plan on just getting a small TV that's under 32 in, all you really need is a monitor mount like this one:

WALI Premium Single LCD Monitor Desk Mount Fully Adjustable Gas Spring Stand for one screen up to 32", 17.6lbs Capacity (GSDM001), Black https://www.amazon.com/dp/B0779JSRH5/ref=cm_sw_r_cp_apa_i_RVPeDb2TZPSVW

and as long as you have a bit of overhang and clearance in the back, shouldn't be an issue.

Why does the back of the desk not allow you to clamp? To thin? If so you can get like an inch block of wood by like 5in L and clamp in between and it works fine (thats what I did) I have this one: https://www.amazon.com/WALI-Premium-Adjustable-Capacity-GSDM001/dp/B0779JSRH5/ref=mp_s_a_1_8?crid=1HN3L2G1SQ2GE&keywords=monitor+arm+desk+mount&qid=1554301112&s=gateway&sprefix=monitor+arm+&sr=8-8

I really like having this arm because it allows me to have my keyboard and pad pushed back with the interference of the stand. I have the benq xl2540 and the stand is heavy. No problems holding it up.

While I'm here, there's a very similar mount, the WALI GSDM001 at https://www.amazon.com/dp/B0779JSRH5, for $35 but with a 15% coupon which puts it near the lowest historical price. Looks like it would be better for if you need the monitor further back towards the mount itself, too.

Anyone have any experience with either of them?

https://www.amazon.com/dp/B0779JSRH5/ref=cm_sw_r_cp_apa_glt_fabc_QBBNRHYKXR4PHEJRJPGZ?_encoding=UTF8&psc=1

Get this. You won't regret it. That's the one I use for my second monitor. I actually prefer it over the bulky main one.

WALI Premium Single LCD Monitor... https://www.amazon.com/dp/B0779JSRH5?ref=ppx_pop_mob_ap_share

I like this a lot, but there’s a slight bend from the weight of the monitor despite my VERY tight clamp

link to monitor arm

Just bought this:

Arm

Very satisfied. Very sturdy and (seemingly) well built. "Beefy" metal and plastic

Monitor plus speaker attachment is around 15ish pounds.

Listing says it supports up to 17.62 lbs

Backside

Frontside

i built a wooden frame out of 2x4s to hold the FP-30. this is the monitor arm, it just clamps to the frame: https://www.amazon.com/gp/product/B0779JSRH5/

i went looking for other options, and this looks like a pretty good way to hold a tablet over your keyboard: https://www.amazon.com/gp/product/B07GQNRQ86 i haven't used it, but i'm tempted to order one for some other places where holding up a tablet would be nice.

nice thing about a full PC and a monitor is that you can get a 24" monitor (or larger!), so i've got basically two tablets worth of screen to put music up on.

https://www.amazon.com/dp/B0779JSRH5

How heavy? This might not hold, but the North Bayou might

Wali: https://www.amazon.com/gp/product/B0779JSRH5/ref=ox_sc_saved_image_5?smid=A2K3WARBVMJ9U9&th=1

NB: https://www.amazon.com/gp/product/B097SZ393X/ref=ox\_sc\_saved\_image\_6?smid=A2V6O7OTRZHL3U&psc=1

I don't think the main arm is available anymore, but the secondary and tertiary monitors are both using this: https://www.amazon.com/gp/product/B0779JSRH5/ref=ppx\_yo\_dt\_b\_asin\_title\_o09\_s00?ie=UTF8&th=1

WALI Premium Single LCD Monitor Desk Mount Fully Adjustable Gas Spring Stand for Display 17-32 inch, 17.6lbs Weight Capacity GSDM001 https://www.amazon.com/dp/B0779JSRH5/ref=cm_sw_r_apan_glt_i_H5FK8W5KDHS6X359K002?_encoding=UTF8&psc=1

VIVO Single Laptop Notebook Desk Mount Stand - Fully Adjustable Extension with C Clamp (STAND-V001L) https://www.amazon.com/dp/B00CM9NG1W/ref=cm_sw_r_apan_glt_i_WSTZ7EVVQFSWP147CN46?_encoding=UTF8&psc=1

I just used one of the masts for both

 

^Item Info | Bot Info | Trigger

 

^Item Info | Bot Info | Trigger

The arm is this: https://www.amazon.com/dp/B0779JSRH5

also pinging u/roblethal

They are 2 separate pieces and I just opted to use one of the mounts. https://www.amazon.com/gp/product/B0779JSRH5/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&th=1
https://www.amazon.com/gp/product/B00CM9NG1W/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&psc=1

WALI Premium Single LCD Monitor Desk Mount Fully Adjustable Gas Spring Stand for Display 17-32 inch, 17.6lbs Weight Capacity GSDM001 https://www.amazon.com/dp/B0779JSRH5/ref=cm_sw_r_cp_api_glt_fabc_P6F64E8FKX4YCRC5BFNB?_encoding=UTF8&psc=1

 

^Item Info | Bot Info | Trigger

https://www.amazon.com/gp/product/B0779JSRH5/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

Tricky to get one that is tall enough to fit the CRG9 underneath at a reasonable height. I thought it was still too low initially but I'm realizing that if I get the CRG9 any higher it may be pretty difficult to crane my neck to look at the top screen haha

 

^Item Info | Bot Info | Trigger

I've spent weeks trying to figure out how I will be mounting my HS8's above my 3 monitors. The Gator Frameworks is currently the only dedicated desk clamping studio monitor stand and it's WAY too short if you need them above a computer screen.

I was strolling on Amazon and knew I wanted it on the same type of arm as my screens, but I could not figure out a way to hold them without fabricating a holder and then I came across a laptop holder with a VESA adapter and wa-la! These things are already the size of a laptop so I knew it'd work. Here is the end result!

Things i'd change if I could or recommend

• Buying a stronger monitor arm (This one is absolutely maxed out to the maximum point of weight support, with arm positioning and everything)

• Straps to hold the monitor to ensure the monitor doesnt have a chance to tip off (Highly doubt this would even happen but peace of mind is nice)

• A laptop mount with a sharper decline to point the monitor down (That is why I have cardboard there)

These are the exact items pictured:
Arm: https://www.amazon.com/dp/B0779JSRH5?psc=1&ref=ppx_yo2_dt_b_product_details
Laptop Mount: https://www.amazon.com/dp/B07R47YY1N?psc=1&ref=ppx_yo2_dt_b_product_details

Monitor arms. I like this model because I'm tall and like my screens to be higher.

https://smile.amazon.com/dp/B0779JSRH5/ref=cm_sw_r_apan_glt_fabc_dl_DCK2HHD677GNQ0MGK14E

Thanks! I got this monitor mount, and have liked it alright https://www.amazon.com/dp/B0779JSRH5/ref=cm_sw_em_r_mt_dp_Z6T8VRG5D37HGGBR9W0C?_encoding=UTF8&psc=1

I didn't stain the wood, but I did add linseed oil.

https://www.amazon.com/gp/product/B0779JSRH5/ref=ewc_pr_img_2?smid=A2K3WARBVMJ9U9&psc=1

Same brand but a gas arm

https://www.amazon.com/WALI-Premium-Adjustable-Capacity-GSDM001/dp/B0779JSRH5/ref=sr\_1\_29?dchild=1&keywords=gas+arm&qid=1620855429&sr=8-29

Looks similar to the WALI single arm, but not sure. The pole looks a little shorter in your pic. https://www.amazon.com/dp/B0779JSRH5/ref=cm_sw_r_cp_apa_fabc_RBC09Z5CH5MZBVKDRSE6

The vertical monitor is an Acer R240HY (just a cheap 1080p IPS off amazon) and my main monitor is a Dell S2417DG (which I absolutely love the pixel density of 1440p in a 24in display). The mount is this one and I added the second arm a little later but you can buy it with 2 arms to begin with and I really like having a vertical monitor! I always have Spotify and/or Discord up and its really nice to see and have those up while gaming.

https://www.amazon.com/gp/product/B0779JSRH5

Is this the gas arm you're talking about? Because I have this one and it seems to do the job I need it to do.

Not sure about something for £30, but this worked for my AW3418DW

https://www.amazon.co.uk/dp/B0779JSRH5/ref=cm_sw_r_sms_awdb_btf_t1_lGaNFbRGAJ99H

Wali stands/arms, while stiff and hard to rotate, have a lot of height to them which is nice for tall people.

I got two of these

Sure thing. One thing to note: They recommend the WALI Premium Single LCD Monitor Desk Mount, but link to the VIVO. It's a bit confusing.

Edited:

I'm calling foul. They say in the article it supports up to 66 lbs. Neither of those do that I can see. Here's a link for reference:

https://www.amazon.com/dp/B0779JSRH5/ref=sspa_dk_detail_3?psc=1&pd_rd_i=B0779JSRH5&pd_rd_w=F6BL9&pf_rd_p=f0355a48-7e73-489a-9590-564e12837b93&pd_rd_wg=NzQZM&pf_rd_r=XDG094BVDG5K0KRKQV2N&pd_rd_r=3aa14ee3-b3d6-4f30-a432-cdd4782ed52b&smid=A2K3WARBVMJ9U9&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyTEUzQzlRWklVVjJSJmVuY3J5cHRlZElkPUEwMTMzMDExMkUxTlRGNTQ4VzRDNiZlbmNyeXB0ZWRBZElkPUEwNjAzNDU5MklJN0FCN0NFWklSVSZ3aWRnZXROYW1lPXNwX2RldGFpbF90aGVtYXRpYyZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

Update:

Looks like this was a lot more nuanced than I realized. There has been a lot of discussion on this topic. Before you buy anything, be sure to give this a read:

https://www.reddit.com/r/ultrawidemasterrace/comments/hinwt9/g9\_arrived/fwh86dd/

Here you go: WALI Premium Single LCD Monitor Desk Mount Fully Adjustable Gas Spring Stand for One Screen up to 32”, 17.6lbs Weight Capacity (GSDM001), Black https://www.amazon.com/dp/B0779JSRH5/ref=cm_sw_r_other_apa_i_lC9iFbYK32Y4Q

Here you go!

WALI Premium Single LCD Monitor Desk Mount Fully Adjustable Gas Spring Stand for Display up to 32 inch, 17.6 lbs Capacity (GSDM001), Black https://www.amazon.com/dp/B0779JSRH5/ref=cm_sw_r_cp_api_i_mWp-Db91G4ZWQ

Yes, the bottom monitor is an Alienware 34 and it is sitting on its original monitor stand. The top monitor is using a gas piston arm mount. https://www.amazon.com/gp/product/B0779JSRH5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

This one looks good. I was looking at this one https://www.amazon.com/WALI-Premium-Adjustable-Capacity-GSDM001/dp/B0779JSRH5/ref=sr_1_9?ie=UTF8&qid=1548798276&sr=8-9&keywords=monitor+arm