What is Reddit's opinion of
WALI Single Monitor Gas Spring Desk Mount, Heavy Duty Monitor Arm for Ultrawide Screen up to 35 inch, 33 lbs. Fully Adjustable, VESA 75 and 100 (GSM001XL), Black?
From 3.5 billion Reddit comments
By popularity on Reddit, this product is:
210 reviews of this product found across Reddit:
I got this one:
WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs. VESA 75 and 100 (GSM001XL), Black https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_cp_api_i_fc-2DbC1BCWXM
No issues once adjusted and tightened properly. Using with CHG90
Looks good. Was there a manufacturer's name on the box?
edit: Nevermind :D Found it on Amazon - WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs
The monitor arm I use for my 49” was only $95, just need to look up the weight tolerances and mounting options and you’re good to go. No complaints whatsoever about this one from Wali
Viotek 34" ultrawide 1440p, highly recommend a ultrawide man not used to having this much screen real estate.
And thank you bro, adding stuff to my setup has become my new addiction
Here's the link for the mount.
You have to really crank the adjustments as tight as you can get them but it holds it with no problems including the tilting mechanism. I've had it mounted for about 24 hours and it hasn't moved.
Sorry, can't help with Ergotron parts. Do you have to extend the XL? Can you just get another monitor arm? This one on amz handles my 34" monitor with zero wobble.
I need to take pics and post my set up, just been lazy over labor day weekend. If I do I'll send a link. I was looking at the ergotron hx at first, I tried and returned a few, settled on this one with Vivo vesa adapter. It's been great, highly recommend.
https://www.amazon.com/dp/B07NLMLLT6?psc=1&ref=ppx_yo2ov_dt_b_product_details
My guy, the WALI arm on Amazon holds up my G9 just fine, no wobble at all. $70 and it is legit solid. Works well on my Uplift desk, no marring, no problem.
I don't know if they sell or deliver this one where you're at but I just got this for my C1 48 and it works great. it would easily handle the weight of the 42. I did also have to get a vesa adapter.
https://www.amazon.com/dp/B07NLMLLT6?psc=1&ref=ppx_yo2ov_dt_b_product_details
How do you like the AVLT? I got the heavier duty version of it that was supposed to support up to 55 lbs for my C1 48. I think it was around $200. The one I got looked used and the set screws were missing plus it didn't hold even the 33 lbs. I got this one instead, just came in yesterday and it holds the weight with ease and can adjust easily. It also dropped in price too. Very pleased with it.
https://www.amazon.com/dp/B07NLMLLT6?ref=ppx_yo2ov_dt_b_product_details&th=1
https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
same manufacturer as the one that cost 3x as much. using it right now. it's incredibly well made, easy to set up and VERY functional.
also, monster light bars mount perfectly onto it :)
there's this wali monitor arm that I use on my 48" LG C1. I bought it last year around christmas for $85, so this is a decent discount at $68. I originally bought it as an alternative to the Egotron HX mount because it was out of stock and just kept it because its worked very well for my needs.
hey just a heads up the monitor arm I got is currently $68. I should mention that if you use this monitor arm, you have to tighten the tilt mechanism pretty tight which makes it so you cant use the tilt function. for big monitors its just set it once and forget about it. but other than that, everything else has worked fine for me. If its the same price for you, might be worth a shot since the reason I found out about this arm was people online recommending it for odyssey g9 and lg c1.
Yep! WALI monitor mount
I used the WALI Single Monitor Arm for nearly two years when I had my G9 and for a year before that when I had the CRG9. No issues, no dropping, nothing. Just make sure you tighten the gas spring so it doesn't actually drop it down and then tighten the tilt bolt as much as you can. I recommend a socket with a torx bit if you have one.
The Ergotron HX does work better with their heavy duty tilt add-on, but I couldn't justify spending $300+ on a monitor arm.
I use 3 of these since I have ultrawides, and there's not a big enough triple monitor stand on the market for them.
WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs. VESA 75 and 100 (GSM001XL), Black https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_apan_i_ENNXS231RYDA0B0SM5GR?_encoding=UTF8&psc=1
Just wanted to add that I didn’t need a $300 Mount for this monitor nor did I have any issues mounting it.
Monitor mount I used below.
WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs. VESA 75 and 100 (GSM001XL), Black https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_cp_api_glt_i_RHT0EY3S8AKYV9098X0X?_encoding=UTF8&psc=1
Holding up fine since 2020
WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs. VESA 75 and 100 (GSM001XL), Black https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_apan_glt_fabc_S96E3FPM1SXCMQVPH020?_encoding=UTF8&psc=1
WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs. VESA 75 and 100 (GSM001XL), Black https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_apan_glt_fabc_THS4WX75Q25Q9D5M4XP2?_encoding=UTF8&psc=1
Not op, but have same monitor and this is what I've been using.
Got the same monitor mine is the 144hz model bought it in 2019, I would recommend for you to buy a desk mount for it here is the link to the 1 that I got WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs. VESA 75 and 100 (GSM001XL), Black https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_apan_glt_fabc_YFZMFWFG50YDZF91AGQ6?_encoding=UTF8&psc=1
These arms look like they're from WALI. I got dual monitor arms that look exactly like these. I'm not sure if these are the exact ones, but they look pretty close.
https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Have couple of these, they work great holding up 40" k's, i know the comments are full of g9 owners as I was looking at that screen when i bouight the arms
Very nice deal but I will point out that Best Buy offers an incredible 5 year warranty on TVs that does cover burn-in on these OLEDs. I have that warranty for this panel and don't worry about burn in at all because of it. There's also a lot of steps you can take to minimize burn in.
Obviously this panel does have an unbeatable viewing experience, but it is a TV and not a monitor, so it's a very slightly sub-optimal experience. If you're going to spend this much on a monitor, consider springing for the AORUS FO48U which actually is a monitor with appropriate software and ports.
One more thing to note for the C1: the stand that comes with this thing sucks big time, you can't pass cables under it. You don't have to splurge on an ergotron for it though, I use a WALI arm with a vesa adapter and it works fine and is much cheaper.
this one worked fine for my CRG9, had to tighten it a lot though. Extra strong arm does not hurt, makes it lasts longer I suppose.
​
I have no idea. There should be some amazon alternative, albeit without the usb ports. I was looking at this before the ulti: https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_cp_awdb_imm_GDVZHJAW0P64FRF28PPE
I just bought a pc roller tray. As far as I know, the pco-11 is such a thick boy, no under desk mount can fit it.
It's such a thick boy, buy I can fit my Noctua D15 T_T
So I don't have specific experience with that monitor and arm specifically, but I do have an LG38GN850 and have used it with a couple different arms. The weight rating is important because it affects the ability of the arm to stay where you put it. If the monitor is to too heavy for the arm, it will sink down slowly until it hits the desk or the mechanical limits of the arm. Too light and the arm pushes the monitor up to the vertical limit, possibly making the viewing angle uncomfortable. The size ratting is a bit different. On a single arm mount, the size limit is usually set based your ability to put the arm in a portrait layout instead of landscape. On dual arm mounts, the limit is usually set by how far apart the arm mounts can be from each other.
I do find it a bit odd that HX doesn't work well with sub 20lb monitors, especially for an arm so expensive. Normally I would say try it and see how it works with lighter monitors, but clearly some people have had that exact issue already. I'd recommend taking a look at the Wali Monitor Arm and see what you think. I have the dual arm version and I've been very impressed. Super well made, heavy duty, and relatively inexpensive. Holds both my 38LG and a 24in Dell side monitor with ease.
Never figured it out exactly. Jacked with settings for several weeks before sending it back. Not sure if it was coming from 4k or what but serious eye fatigue was an issue for me after only a few minutes. Gaming was fine it was looking at font/web pages that was causing all the strain and soreness.
I used the following mount with it and my current AOC AGON 49" https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
I used this monitor arm for the past year on a 38" LG 38GL950G, and definitely experienced minor wobbling although the arm was rock solid. Depending on the stability of your desk, you probably are always going to experience a little wobbling no matter what the mount. Just this week I decided to upgrade to the ergotron HX wall mount to completely separate my monitor from the desk, and it's been like night and day.
WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs. VESA 75 and 100 (GSM001XL), Black https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_apan_glt_fabc_AWRS1G7WJY5V5EXWZY9M?_encoding=UTF8&psc=1
You don't need the Ergotron HX monitor arm, the heavy duty WALI arm from Amazon will hold a G9 for a quarter of the price. The one I bought has been holding my G9 for over six months without an issues.
I have that exact monitor and use this one. I've had it for 4 months and it's held it up great. It's not on Amazon anymore but maybe another site sells it. Or at the least the measurements in description may help.
https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=UTF8&psc=1
There’s an arm behind the MacBook - WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs. VESA 75 and 100 (GSM001XL), Black https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_cp_api_glt_fabc_QN6W0BGAXRDTHH908064?_encoding=UTF8&psc=1
I'm using this mount: https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
Theres a small but noticable amount of wobble with it extended all the way out, but if you look closely, I actually have it propped up ever so slightly with my Anker wireless phone charger. The wobble is essentially gone with this small amount of support!
WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs, VESA 75 and 100 (GSM001XL), Black https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_cp_api_glc_fabc_73p8FbS254M8V?_encoding=UTF8&psc=1
For the monitor I picked up Amazon.com : WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs, VESA 75 and 100 (GSM001XL), Black : Office Products I had to tighten the monitor tilt adjustment almost to the max to avoid sagging, and the one at the arm joint is pretty close to the max...so far so good. The one the camera is on is just a vivo dual mount I adapted to hold a tripod head.
​
Edit: CRG9 about 26 pounds of monitor
Think I found it, model number is GSM001XL and reviews saw it works well, wish I knew about this one earlier! Would have save a decent amount of money on an arm.
Amazon.com : WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs, VESA 75 and 100 (GSM001XL), Black : Office Products
I researched a lot and found that this arm is one of the only ones that will work. It is super heavy duty and once you lock it down it doesnt budge. Definitely recommend.
WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs, VESA 75 and 100 (GSM001XL)
https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_cp_api_fabt1_rINWFbHNEDTZ4
WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs, VESA 75 and 100 (GSM001XL), Black https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_cp_api_fabc_qX6UFbE8JKHV1
someone who purchased G9 posted a pic on his review with it! I’ll have to look at the ergoton, can you link where they announced a G9 specific mount?
That one in particular would not work no. It would not fit but yeah likely slouch. It needs to be a Vesa mount that can hold at least 26 pounds. I am starting to think I'll do what I done before and this mount will be up for the task..https://www.amazon.com/WALI-Monitor-Adjustable-Capacity-GSM001XL/dp/B07NLMLLT6/ref=sr_1_4?dchild=1&keywords=49%2Binch%2Bvesa%2Bmount&qid=1604954164&sr=8-4&th=1
Sorry didn't see this post till now. I just used the screws from the stand that comes with the monitor. I'll post a picture when I get off work.
Also side note concerning curved ultrawide monitors and monitor arms: the extra width and curve of the monitor spreads out the center of gravity away from where the mount is, thus requiring more force to hold it up. I recommend getting one that is rated at least a few pounds over the weight of the monitor to accommodate. Cause the last thing you want is the arm to fail and your monitor to fall.
This is the one I have
https://www.amazon.com/dp/B07NLMLLT6?ref=ppx_pop_mob_ap_share
I also have a 3440x1440 LG monitor. Of course you're going to have less performance with the larger 32:9 resolution. How much really depends on the game. I'd say expect a...15-20% reduction in FPS? I'd take a look at 4K benchmarks of the games you play and calculate ~10-15% more frames over 4K.
As for movies, yes, you'll have black bars on the sides or a very stretched video.
As for mounts, the Odyssey G9 weighs about 32lbs. without the stand. This is the stand I personally plan on getting for mine. Any should work that supports the weight though.
I'm using the WALI heavy duty monitor arm for my G9. It can hold the weight of the G9 with no problems with no modifications needed.
https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_cp_apa_i_fsWqFb3JJ9QZW
I use this arm for my AOC Agon 49 inch and holds up fine. Just check your monitor's weight without the stand. If its under 33lbs it shold be fine, just becareful when installing.
Just finished install and cabling. Very happy. Still long way to cleanup the mess :P My setup was 1080p + LG34 + Dell but with the new odyssey g9, it's getting too wide, and maybe i will rearrange them.
The monitor arm is from amazon The pole in the picture is not used right now. It is the old arm for LG.
About the monitor arm for g9, I give 4stars. It's very good (rated for 33lb) but the sagging was insane. I had to tighten the joint almost breaking the L wrench. Still it is maybe one degree lower than i like but i am not touching that again :P
Overall super happy with the G9. I do not have a gaming PC so no gaming test until I get 3080 or 3090.
It is an off brand heavy duty arm from Amazon. I'm waiting on a custom standing desk and then I will switch to an Ergotron arm. It was hard finding an arm to support such a huge monitor.
Its a Wali arm from Amazon. So far I haven't had any issues with it. I do move the monitor around a lot too.
I have a CRG9 and I assume the G9 has similar weight specs. The only mount that worked for me and didn't sag / bow down is this WALI mount from Amazon. No issues with it at all.
I built a frame out of 2x4's and attached this heavy duty mount I found on Amazon. The mount is great, strong once you get it dialed in and tightened down. As for the rig it isn't complete still doing some adjustments, but will post once finished.
This is the one I’m currently using for my 49” LG UltraWide, works pretty well.
WALI Single LCD Monitor Fully Adjustable Gas Spring Desk Mount Fit One Screen VESA up to 35", 33 lbs. Weight Capacity (GSM001XL), Black https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_cp_api_i_dfUfDb5WFEZNK
Blue Yeti Microphone
LG 38wk95c
WALI Single Monitor Gas Spring ( https://www.amazon.com/dp/B07NLMLLT6?ref=ppx_pop_mob_ap_share )
Logitech C920 webcam
Desk Pad ( https://www.amazon.ca/dp/B01N2FZRSF/ref=cm_sw_r_cp_apip_hayrNIS7MEuUu )
Vortex Tab 90M keyboard
CalDigit TS3 dock
AirPods
Logitech MX Master 3 mouse
MacBook Pro 2020 13” 10th gen intel i5
TwelveSouth Book Arc laptop stand
Table from CB2 (many years ago!)
No idea where chair is from.
Blue Yeti Microphone
LG 38wk95c
WALI Single Monitor Gas Spring ( https://www.amazon.com/dp/B07NLMLLT6?ref=ppx_pop_mob_ap_share )
Logitech C920 webcam
Desk Pad ( https://www.amazon.ca/dp/B01N2FZRSF/ref=cm_sw_r_cp_apip_hayrNIS7MEuUu )
Vortex Tab 90M keyboard
CalDigit TS3 dock
AirPods
Logitech MX Master 3 mouse
MacBook Pro 2020 13” 10th gen intel i5
TwelveSouth Book Arc laptop stand
Table from CB2 (many years ago!)
No idea where chair is from.
I had the crg9 and g9 and this monitor arm worked great for both!
Crg9 monitor with a WALI XL gas spring arm. The arm is not meant for the 34 lbs of the beast of a monitor but it holds up perfectly fine with no wobbles.
https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_cp_apa_i_DZHgFb2DD3838
I am using the same arm as u/zomgitzkyle.
I have been using this one with my CRG9 and have zero complaints.
Thank you!
For the 49 inch, I used the WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs. VESA 75 and 100 (GSM001XL), Black https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_em_apa_i_dL4.Eb7PTS333
*it says 35 inch, but it can fit the 49 if it meets the weight requirements. I'd only get this if you don't plan on moving the monitor much though. There are better ones out there, but just more expensive.
For the top two 27 inch monitors, I used VIVO Dual Monitor Stand Up Desk Mount Extra Tall 39 inch Pole | Fully Adjustable Stand for up to 27 inch Screens (STAND-V012) https://www.amazon.com/dp/B01B3GUMM0/ref=cm_sw_r_em_apa_i_UL4.EbYAQ0B4M
Based on what? The screen is obviously incredibly light. 32 pounds. Any arm that can support 32 pounds and a 300 mm x 200 mm VESA pattern is going to work.
Example: https://www.amazon.com/WALI-Monitor-Adjustable-Capacity-GSM001XL/dp/B07NLMLLT6/
This one is 100x100 VESA. What do do...get an adapter plate.
Boom, done:
https://www.amazon.com/Mount-VESA-Mount-Adapter-Plate/dp/B07F577TKZ/
I ordered this one since it was recommended by some folks here and it has a very reasonable price and is on sale:
https://www.amazon.com/gp/product/B07NLMLLT6/ref=ox\_sc\_act\_title\_1?smid=A2K3WARBVMJ9U9&psc=1
The guys who sold me the G9 recommended the one that he was using:
Desk mount or wall mount it! You will enjoy it much more the legs take up too much space
Here is the one I have works pretty good
This one works just fine. https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
Scored mine on warehouse for like $54. You really have to crank it to the + side though.
WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs. VESA 75 and 100 (GSM001XL), Black https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_cp_apip_g3jtBqY5lDCI7
I got both arms on Amazon. The one holding up the 49" is this one and the one holding up the other monitor is right hurrr. I'm in a basement with a low ceiling so I actually had to cut the taller arm by a few inches to prevent poking a hole in the ceiling when I put the desk in standing mode.
Looks similar to mine from the image.
https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
For the 49 inch, I used the WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs. VESA 75 and 100 (GSM001XL), Black https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_em_apa_i_dL4.Eb7PTS333
*it says 35 inch, but it can fit the 49 if it meets the weight requirements. I'd only get this if you don't plan on moving the monitor much though. There are better ones out there, but just more expensive.
For the top two 27 inch monitors, I used VIVO Dual Monitor Stand Up Desk Mount Extra Tall 39 inch Pole | Fully Adjustable Stand for up to 27 inch Screens (STAND-V012) https://www.amazon.com/dp/B01B3GUMM0/ref=cm_sw_r_em_apa_i_UL4.EbYAQ0B4M
Thank you!
For the 49 inch, I used the WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs. VESA 75 and 100 (GSM001XL), Black https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_em_apa_i_dL4.Eb7PTS333
*it says 35 inch, but it can fit the 49 if it meets the weight requirements. I'd only get this if you don't plan on moving the monitor much though. There are better ones out there, but just more expensive.
For the top two 27 inch monitors, I used VIVO Dual Monitor Stand Up Desk Mount Extra Tall 39 inch Pole | Fully Adjustable Stand for up to 27 inch Screens (STAND-V012) https://www.amazon.com/dp/B01B3GUMM0/ref=cm_sw_r_em_apa_i_UL4.EbYAQ0B4M
Not sure what the simpit mount is but this is what I use with my C1 48 along with Vesa adapter and it's been great.
https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
I used this one and this tall arm one to stack the second monitor on top
I used a single arm mount for the CRG9 and a dual arm mount for the top too monitors with the poll on the latter replaced by another longer one I had handy.
links for reference:
https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx\_yo\_dt\_b\_asin\_title\_o04\_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B0855ZBPXD/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
($66) ARM: https://www.amazon.com/dp/B07NLMLLT6?psc=1&ref=ppx_yo2ov_dt_b_product_details
($20) https://www.amazon.com/dp/B093F95VTC?ref=ppx_yo2ov_dt_b_product_details&th=1 (might be unnecessary, not sure how sturdy your desk is, but definitely needed on glass)
($15) Vesa 100x100 to 300x200 for C2 https://www.amazon.com/gp/product/B07LB4R7GM/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1
($18) Soundbar Vesa Mount
https://www.amazon.com/gp/product/B09VPBWDT2/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Thank you!
The monitor below uses this one and the one on top this other one
This is what I use for my 49" Not a single issue for the last year and a half.
https://www.amazon.com.au/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
It's a WALI monitor arm. Here's the link. If you get the black one, you can tick the coupon box to save $10.
Here's the link.. If you get the black one, you can tick the coupon box to save $10.
I'm using this for a 49" Sammy monitor works great; recommended by another reditor and reasonable price.
​
https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&th=1
I switched from a multiple monitor arm to 4 single arms. Way more flexibility and the cost was only slightly more than a good quality multi-arm.
I now own 3x WALI Heavy Duty (3x Samsung 34 wide screen monitors) and 1x MountUp that I use for a laptop stand. I tried and returned 2 different ergotron models, and 1 amazon basics model.
Ended up giving this one a try after reading a bunch of reviews, figure if it was bad I would just break down and buy the Ergotron HX.
https://www.amazon.com/WALI-Monitor-Adjustable-Capacity-GSM001XL/dp/B07NLMLLT6
If your monitors are under 26" or so and under about 14#'s, you have a lot of options. I have 2 34 in. monitors and this is the best mounting arm I've tried so far - WALI Heavy Duty. I've tried and returned 4 others, including Ergotron, Amazon Basics, Huano, Vivo.
This MountUp version I kept and use it with a laptop stand. It just wasn't stable enough for the wide monitor, but is fine for my laptop (and probably would be fine with a regular sized monitor).
If your monitors are under 26" or so and under about 14#'s, you have a lot of options. I have 2 34 in. monitors and this is the best mounting arm I've tried so far - WALI Heavy Duty. I've tried and returned 4 others, including Ergotron, Amazon Basics, Huano, Vivo.
This MountUp version I kept and use it with a laptop stand. It just wasn't stable enough for the wide monitor, but is fine for my laptop (and probably would be fine with a regular sized monitor).
I've recommended this arm many times here. Have used it on my 48" for a couple months now and it's been great. Easily supports the weight. Arm and vesa adapter around $100
https://www.amazon.com/dp/B07NLMLLT6?ref=ppx_yo2ov_dt_b_product_details&th=1
https://www.amazon.com/dp/B07MG8DCTL?psc=1&ref=ppx_yo2ov_dt_b_product_details
WALI Single Monitor Gas Spring... https://www.amazon.com/dp/B07NLMLLT6?ref=ppx_pop_mob_ap_share
WALI Single Monitor Gas Spring... https://www.amazon.com/dp/B07NLMLLT6?ref=ppx_pop_mob_ap_share
I tried the heavy duty AVLT on my C1 48 and it looked like it was used, the vesa plate was bent and missing set screws plus it didn't support the weight and only came in white. So I returned searched more and got this arm, right now it's even $20 off for $79 and these vesa brackets. Looked to be better quality too but minus the USB and audio jacks in the base, which I didn't really want or need. Have used it for 2 weeks now, works great. Can angle, raise and lower 33 lbs with ease. Best value to price, I'd even be willing to pay more but why?
https://www.amazon.com/dp/B07NLMLLT6?psc=1&ref=ppx_yo2ov_dt_b_product_details
https://www.amazon.com/dp/B07MG8DCTL?psc=1&ref=ppx_yo2ov_dt_b_product_details
Got this arm and vesa adapter for my C1 48. Highly recommend, fully adjustable and it will easily hold your 42. I was going to go Ergotron HX but it doesn't raise up as high as this one.
https://www.amazon.com/dp/B07NLMLLT6?ref=ppx_yo2ov_dt_b_product_details&th=1
https://www.amazon.com/dp/B07MG8DCTL?psc=1&ref=ppx_yo2ov_dt_b_product_details
My first OLED too, that's why I want the 77" now. I guess if the C1's are sold out I can hold out and wait until this time next year. Give me time to finish the HT room in the basement where it's going.
You may be totally happy with the tv stand it came with but if you're looking for an arm I got this last week and it holds the weight great and fully adjustable. You can also tilt it to get rid of reflection glare. You'll need vesa adapter too. Both links below
https://www.amazon.com/dp/B07NLMLLT6?psc=1&ref=ppx_yo2ov_dt_b_product_details
https://www.amazon.com/dp/B07MG8DCTL?psc=1&ref=ppx_yo2ov_dt_b_product_details
https://www.amazon.com/dp/B07NLMLLT6/ref=twister_B09NMYDDH9?_encoding=UTF8&psc=1
​
In the review section, there are people who use it with the LG C1. I'm having it right now but not with the C1.
This ones claims to hold 33lbs: https://www.amazon.com/WALI-Monitor-Adjustable-Capacity-GSM001XL/dp/B07NLMLLT6/
I have this one on the bottom:
https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
And this one for the top:
https://www.amazon.com/gp/product/B07L8PMBKY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Never had any issues with drooping or not holding the weight of the monitors. You do have to tighten everything as tight as it'll possibly go.
I got the WALI mount, not the Ergotron HX everyone recommends. Reason being I ordered before finding out about the Ergotron and kept it because Neo is lighter than the G9 and the arm is more than capable of holding it.
https://www.amazon.com/dp/B07NLMLLT6?psc=1&ref=ppx_yo2ov_dt_b_product_details
if you're planning to get a monitor arm I would recommend this https://www.amazon.com/dp/B07NLMLLT6?psc=1&ref=ppx_yo2ov_dt_b_product_details. cheapest one but still has a good quality.
I use this for my primary monitor, recently got this for the 16:9 monitors on the left about a month ago and this got in a few days ago. The double arm one is good for the price but shakey, and the one of the top was cheap and tall which is all I needed. I couldve spent more on something more adjustable but I dont want to end up spending anohter $100 on a monitor arm again.
Similar to the one I'm using for my AOC Agon 49". Scored one on Warehouse for $52.11 total. Cheapest now is $82.82+ tax. Might as well clip the coupon and get it new for $89.99. LOL https://www.amazon.com/gp/product/B07NLMLLT6
Can you post the link for the Amazon brand? I found an off=brand mount and it can't/barely support the weight of the monitor. Thank you!
I'm sure the expensive ones are great, but I got this fairly cheap one here and it's perfectly fine - no complaints:
https://smile.amazon.com/gp/product/B07NLMLLT6
For my other desk I'm using this one (wall mounted) and it's also totally fine:
​
if you want something a bit cheaper
I use the Walli brand mounts for all of my monitors. For my money they are fairly priced and have been wonderful. As for specific models,
32:9 single arm: WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs. VESA 75 and 100 (GSM001XL), Black https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_apan_i_XFRAYAYVJWBTFVZ34WT6?_encoding=UTF8&psc=1
Dual wall mount arm: WALI Dual LCD Monitor Fully Adjustable Gas Spring Wall Mount Fit 2 Screens VESA up to 27 inch, 14.3 lbs. Weight Capacity per Arm (GSWM002), Black https://www.amazon.com/dp/B01MTCTGVX/ref=cm_sw_r_apan_i_BB449J3CD0TB0E6WB2BA?_encoding=UTF8&psc=1
For the ultrawide: https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I don't remember the one on the bottom but it's a dual screen arms, I only use one side
Monitor stand is made by Wali (https://www.amazon.com/dp/B07NLMLLT6/). This is by far the best price vs quality deal out there. All the wires hide in the channels built into the arm!
i have 2 of their arms and a friend uses it too, no problems.
This arm that supports a heavier display. monitor arm
I have this one! https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_cp_api_glt_i_dl_YM6YPMK7TRY6842MCKPA?_encoding=UTF8&psc=1
It’s been really solid. The feet of my desk actually hit the wall before the monitor arm does!
Here is a picture of the back https://i.imgur.com/J4fYWGP.jpg
Just a note to add. I have a piece of 2x6 drilled into the back of my desk that gives the monitor arm that extra height to be able sit above the bottom monitor.
​
You can try a thicker piece of wood if you would like it higher but you may not be able to do much more since it has the plate that is used to clamp onto the desk which is maybe 3 inches wide.
​
Without any added height with a piece of wood, this is not possible with just the arm on your desk with no extra height given by the piece of wood.
Lurking through the sub since I just bought a G9. I ordered this one on Amazon, lots of people say it works great for it: https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_cp_api_glt_i_H54Y5GM8DEPM7C8WYPG1
having a heavy ultrawide i didnt skimp on the monitor arm, no regrets its rock solid.
link to what i got. prob a little overkill for the monitors youve got tho.
https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Here are the mounts I purchased
G9 Mount: https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Acer 27 inch mount (vertical monitor):
https://www.amazon.com/gp/product/B08GKDJSHX/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I have an EVGA 2080 super RTX - it doesn't strain to have dual monitors. What GPU are you using?
WALI Single Monitor Gas Spring... https://www.amazon.com/dp/B07NLMLLT6?ref=ppx_pop_mob_ap_share
| Item | Current | Lowest | Reviews |
|---|---|---|---|
| WALI Single Monitor Gas Spring Desk Mount Heavy D… | $89.98 | $- | 4.5/5.0 |
^Item Info | Bot Info | Trigger
If you actually want build advice for an ultimate PC setup in which money is no object, I'd go this route.
First, you need a main monitor. Right now, the king in my opinion is the PG32UQX. It's a 4K, 144Hz refresh rate, 1ms GTG response time gaming monitor, with VRR of course, but it has two key things that make it the king of monitors. #1: It's MiniLED, which is basically as close to OLED as you can get right now without being OLED, and MiniLED has zero risk of burn in. #2: It's VESA DisplayHDR 1400 Certified. Most competitors to this monitor will have the 4K 144Hz with VRR, but they usually won't be MiniLED, and they almost certainly won't be HDR 1400 certified. The new 2021 M1 MacBook Pros use MiniLED displays that can go up to 1600 peak nits brightness, and let me tell you from experience, MiniLED with that caliber of HDR quality is superior to OLED in my opinion.
For your side monitors, you could run more 4K monitors, but you don't really need to. These can 1440p 144Hz monitors and you won't be disappointed, and your graphic's card might thank you. Of course, if you're big ballin, might as well go all out. You do you!
You should mount all of those monitors, and you should probably have 3 total. From personal experience, this one holds even the heaviest monitors, including my curved 38" ultrawide.
For the tower, here's what you want.
- ASUS ROG Strix RTX 3090 OC - best in slot.
- Intel i9-12900K - best in slot until AMD retakes the crown.
- ASUS ROG Maximus Z690 Hero Motherboard - best LGA 1700 motherboard for the 12th gen i9.
- Get some 4800 MHz DDR5 RAM. - Not best in slot because some DDR4 is still just better since the new DDR5 has that Cas Latency up to like 40 and DDR4 can get down to that 16 or even less, but you're forced into DDR5 because of the motherboard and CPU.
- A very beefy power supply, and probably an Uninterruptible Power Supply battery backup to protect your hardware from blackouts and to let you keep gaming even when your power goes out for a few more minutes in order to save your game.
Then you need your peripherals.
- First, throw that blue yeti into the garbage can, and head over to sweet water. Sure, you could be a normie and get the streamer's favorite: Shure SM7B, or you could be cool and get the much deeper and rounder-sounding AKG C214. Honestly they're both great, but the SM7B is a broadcast microphone for a reason, and by design, so keep that in mind, and there are other great choices too. Make sure to pick up one of those Rode PSA1 boom arms too. They are an absolute delight and you'll need a quality boom arm for your quality microphone.
- While you're there, go ahead and pick up a TC Helicon GOXLR Pro as an audio controller. There are other great amplifiers out there, but this one is the highest tier for gamers/streamers. It'll let you adjust volumes for different programs separately with physical faders (like a fader dedicated to just Spotify for example), gives you the thing you need to actually plug your microphone into your computer (XLR input with phantom power), comes with a sampler to mess with your friends, and a voice changer too.
- Now head over to Sennheiser's website and pick out some open back audiophile headphones that match your budget. The more money you spend, the better sound you're going to get. And these headphones are comfortable even after using them for 8+ straight hours. No ear fatigue, and really world class sound quality.
- Now if you going to be a streamer, you're going to need a camera of some sort. Don't go and get one of those cheap ass "webcams". You need a Sony Mirrorless camera. I recommend this pairing. Make sure to get a tri-pod or some sort of mounting mechanism too. Elgato's Ring Light for $200 can also hold the camera in the middle of the light so it doubles as a camera holder.
- Now you're going to need some lights. Elgato makes great ring lights and key lights. Just stick with this brand for your streaming lights if possible. While you're on their website, you can pick up a capture card if you really want to, but I wouldn't recommend it. Not even the best capture cards have a pass through mechanism that can give you 4K 144Hz with HDR. Until Elgato or someone else steps up their passthrough game, just stream directly off the GPU for now. However, make sure you pick up a Stream Deck XL when you're visiting Elgato. It will speed up your streaming workflow like a dream. Warning though, once you use a stream deck, you'll never want to not have one ever again.
- Make sure the rest of your room is just flooded with LED wifi light strips, and make sure you're hanging a bunch of those NanoLeaf shape lights on your wall for the bling bling.
- For keyboard and mouse, the logitech lightspeed products are the highest tier for wireless with the market's lowest input lag for bluetooth, but wired products never have to recharge and never have input lag, so there's arguments for both types and lots of opinions. I highly recommend at least choosing a mechanical keyboard, and then getting some solid gold custom keycaps.
- Finally, your throne. Every setup needs a designated space for the gamer's ass, and for that, you can't go wrong with a Cosm Herman Miller, but there are other great choices too. Don't settle for a "gamer chair." Treat your ass with respect.
| Item | Current | Lowest | Reviews |
|---|---|---|---|
| WALI Single Monitor Gas Spring Desk Mount Heavy D… | $89.98 | $- | 4.5/5.0 |
^Item Info | Bot Info | Trigger
| Item | Current | Lowest | Reviews |
|---|---|---|---|
| WALI Single Monitor Gas Spring Desk Mount Heavy D… | $89.98 | - | 4.5/5.0 |
^Item Info | Bot Info | Trigger
Since my desk is pretty thick - (Top and frame) - I have to use this WALI one on amazon.
It's 3 of these: WALI GSM001XL - https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_apan_glt_fabc_2CT1YEJ358PA8MBSQ3MS?_encoding=UTF8&psc=1
I don't have an apple display, but FWIW I use this with no problems on my 49" samsung display: https://smile.amazon.com/gp/product/B07NLMLLT6/
Here’s the alternative I used to the expensive ergotron. I use this with the g9, no issues.
WALI Single Monitor Gas Spring... https://www.amazon.com/dp/B07NLMLLT6?ref=ppx_pop_mob_ap_share
>The arm for the monitor in the bottom
>
>https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&th=1
>
>The arm holding the monitor on top:
>
>https://www.amazon.com/gp/product/B01BO42XK0/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&psc=1
Here’s the one I run with my G9, works flawlessly.
WALI Single Monitor Gas Spring... https://www.amazon.com/dp/B07NLMLLT6?ref=ppx_pop_mob_ap_share
| Item | Current | Lowest | Reviews |
|---|---|---|---|
| WALI Single Monitor Gas Spring Desk Mount Heavy D… | $89.98 | $89.98 | 4.5/5.0 |
^Item Info | Bot Info | Trigger
| Item | Current | Lowest | Reviews |
|---|---|---|---|
| WALI Single Monitor Gas Spring Desk Mount Heavy D… | $89.98 | $89.98 | 4.5/5.0 |
^Item Info | Bot Info | Trigger
I've got a Samsung 49" monitor and use this arm which is working very well. WALI Single Monitor Gas Spring... https://www.amazon.com/dp/B07NLMLLT6?ref=ppx_pop_mob_ap_share
https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
This is the one. I was going to get the Ergotron HX but read some reviews about it pushing the monitor forward about 7". So I saw a user on this subreddit recommend this arm. So I am giving it a try. It is at its weight limit but so far so good.
​
Yes that is a JDS Labs Element II with a S.M.S.L AO200.
I just wanted to demonstrate the concept of a side-by-side, two person battlestation that can be converted into a single person dual monitor setup, made possible by these fabulous $90 monitor arms.
Big screen is an LG C1 48" 4K OLED. Smaller screen is some Dell 32" 1440p 60hz VA panel.
It's two mounts.
The big screen is on this - https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 - using the grommet installation.
The smaller screen is mounted on the wall with this - https://www.amazon.com/gp/product/B08B1QK2GJ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
​
And thanks!
https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
This one has worked for me.
I'm using the WALI single monitor arm mount from Amazon (Link)
I would love to know as well... I have ordered this: https://www.amazon.ca/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
My plan is to raise it above my other CRG90. Do you think it will work or would you suggest a different mount?
Alienware AW3418DW
WALI Single Monitor Gas Spring... https://www.amazon.com/dp/B07NLMLLT6?ref=ppx_pop_mob_ap_share
VIVO Steel VESA Extension Mount... https://www.amazon.com/dp/B07MG8DCTL?ref=ppx_pop_mob_ap_share
Hey man, I made a post about this a while ago, which I'll copy here:
Hey, just a heads up that you can use a much cheaper arm than the HX, and it still works. I recently purchased an LG CX 48 and was faced with the decision of which arm to buy.. After doing extensive research and learning about the price and availability of the Ergotron HX, I decided to test my luck with a WALI arm I found on Amazon (https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1) combined with this VIVO VESA adapter (https://www.amazon.com/gp/product/B07MG8DCTL/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1). The display without the stand reportedly weighs 32.8 lbs, and the arm is rated for 33 lbs. Unfortunately, the VESA adapter, despite being the lightest I could find, adds 0.9 lbs of weight, bringing the total weight 33.7 lbs, which is 0.7 lbs heavier than the rated 33 lbs of the arm.
I am happy to report that everything works flawlessly. The monitor is mounted on the arm with the adapter and I'm able to move it up, down, side to side, tilt, rotate, etc. with very little effort. I had to tighten the tensioning screw a decent amount, but never felt like I was getting close to a limit or anything like that. I suspect there's a fair bit of tolerance at play here, both on the part of the arm's rating and on the part of the monitor's reported weight.
Anyway, I would highly recommend this combination as it's much cheaper than the Ergotron HX, it works flawlessly, and it's easily available on Amazon.
Cheers
I bought this WALI monitor arm a year ago for my 49" Samsung Odyssey G9, and it has worked great
Wali Single Monitor Gas Spring Mount (Heavy Duty model)
https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_em_r_mt_dp_FC546SW7G5ZM17KRXXZV
WALI Single Monitor Gas Spring... https://www.amazon.com/dp/B07NLMLLT6?ref=ppx_pop_mob_ap_share
I mounted my 48” oled with this monitor arm. Works great and extremely beefy.
I have been looking at standing desks for a while, I really appropriate this sub and the other one ;), for all the reviews and ideas, was close to buying the Uplift V2 commercial, and then I saw the reps responses here about the stability, saw Chris's and Btod's and many many other videos and reviews, eventually went with the Deskhaus Vertex 4 Legs, and with the live edge Walnut top, which really looks beautiful.
The Setup
Desk:
Deskhaus Vertex 4 Legs with casters: https://www.desk.haus/products/vertex-pro-diamond-4-leg
72" x 30" Walnut Live edge top (can't be ordered directly but can be seen on site): https://www.desk.haus/products/grand-rapids-desk
Wire Snake (included with the desk): https://www.desk.haus/products/wire-snake
3inOne Above + Below Desk Kit (included with the desk): https://www.desk.haus/products/3inone-above-below-desk-kit
2x WALI Single Monitor Arm: https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1
WALI VESA Mount Bracket Adapter (for my non-VESA monitor): https://www.amazon.com/gp/product/B079957W6Q/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Leather Desk Pad: https://www.amazon.com/gp/product/B083JP5QY4/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Desktop Speaker Stands: https://www.amazon.com/gp/product/B07SHCLR7T/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1
Tech:
ASUS ROG Strix G35CZ: Core i9-10900KF, 32GB DDR4 RAM, GeForce RTX 2080 SUPER
Dell S2721DGF: 27" Monitor 2560x1440 IPS 165hz
Asus MX27AQ: 27" Monitor 2560x1440 IPS
Edifier R1280T: https://www.amazon.com/gp/product/B016P9HJIA/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1
Cable Management:
3x3in Server Rack: https://www.amazon.com/gp/product/B00006HQV5/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Mountable Power Strip: https://www.amazon.com/gp/product/B081MZXG9L/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Cable Management Clips: https://www.amazon.com/gp/product/B07RQCXCR2/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Cable Ties: https://www.amazon.com/gp/product/B001E1Y5O6/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1
WALI gas spring monitor arm. I didn't want to risk getting a cheap monitor arm, especially with how heavy the monitor is
Hey, just a heads up that you can use a much cheaper arm than the HX, and it still works. I recently purchased an LG CX 48 and was faced with the decision of which arm to buy.. After doing extensive research and learning about the price and availability of the Ergotron HX, I decided to test my luck with a WALI arm I found on Amazon (https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1) combined with this VIVO VESA adapter (https://www.amazon.com/gp/product/B07MG8DCTL/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1). The display without the stand reportedly weighs 32.8 lbs, and the arm is rated for 33 lbs. Unfortunately, the VESA adapter, despite being the lightest I could find, adds 0.9 lbs of weight, bringing the total weight 33.7 lbs, which is 0.7 lbs heavier than the rated 33 lbs of the arm.
I am happy to report that everything works flawlessly. The monitor is mounted on the arm with the adapter and I'm able to move it up, down, side to side, tilt, rotate, etc. with very little effort. I had to tighten the tensioning screw a decent amount, but never felt like I was getting close to a limit or anything like that. I suspect there's a fair bit of tolerance at play here, both on the part of the arm's rating and on the part of the monitor's reported weight.
Anyway, I would highly recommend this combination as it's much cheaper than the Ergotron HX, it works flawlessly, and it's easily available on Amazon.
Cheers
Thanks! Here's the arm: https://smile.amazon.com/WALI-Monitor-Adjustable-Capacity-GSM001XL/dp/B07NLMLLT6/
First of all, the display is absolutely amazing. One of the best purchases I've ever made. I did a lot of research before committing, and it's blown me away. All of my doubts about it being too big have completely disappeared - it's perfect.
I wanted to share some information about how I mounted the display to my desk. The prevailing wisdom in this sub seems to be that the Ergotron HX is the only viable option unless you want to pay $500+ for the Humanscale M10.
After doing extensive research and learning about the price and availability of the Ergotron HX, I decided to test my luck with a WALI arm I found on Amazon combined with this VIVO VESA adapter. The display without the stand reportedly weighs 32.8 lbs, and the arm is rated for 33 lbs. Unfortunately, the VESA adapter, despite being the lightest I could find, adds 0.9 lbs of weight, bringing the total weight 33.7 lbs, which is 0.7 lbs heavier than the rated 33 lbs of the arm.
I am happy to report that everything works flawlessly. The monitor is mounted on the arm with the adapter and I'm able to move it up, down, side to side, tilt, rotate, etc. with very little effort. I had to tighten the tensioning screw a decent amount, but never felt like I was getting close to a limit or anything like that. I suspect there's a fair bit of tolerance at play here, both on the part of the arm's rating and on the part of the monitor's reported weight.
Anyway, I would highly recommend this combination as it's much cheaper than the Ergotron HX, it works flawlessly, and it's easily available on Amazon.
Happy to answer any questions about the experience, setup, or anything else. Cheers!
I think this is the exact model from a different company. The pictures are completely identical AFAICT.
https://www.amazon.com/gp/product/B07NLMLLT6 @ $99.
10 year warranty and I believe U.S. based, so I'd rather buy from them.
It was this one on amazon : https://www.amazon.ca/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
A lot of comments saying it could hold an ultrawide but I guess it can't haha!
Hey - I recently purchased an LG CX 48 and was faced with the same decision. After doing extensive research and learning about the price and availability of the Ergotron HX, I decided to test my luck with a WALI arm I found on Amazon (https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1) combined with this VIVO VESA adapter (https://www.amazon.com/gp/product/B07MG8DCTL/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1). The display without the stand reportedly weighs 32.8 lbs, and the arm is rated for 33 lbs. Unfortunately, the VESA adapter, despite being the lightest I could find, adds 0.9 lbs of weight, bringing the total weight 33.7 lbs, which is 0.7 lbs heavier than the rated 33 lbs of the arm.
I am happy to report that everything works flawlessly. The monitor is mounted on the arm with the adapter and I'm able to move it up, down, side to side, tilt, rotate, etc. with very little effort. I had to tighten the tensioning screw a decent amount, but never felt like I was getting close to a limit or anything like that. I suspect there's a fair bit of tolerance at play here, both on the part of the arm's rating and on the part of the monitor's reported weight.
Anyway, I would highly recommend this combination as it's much cheaper than the Ergotron HX, it works flawlessly, and it's easily available on Amazon.
Cheers
I've been using this with my 49" AOC AG493UCX for the past 10 months. I use it on a standing desk, and have had zero issues with it.
When properly tightened, there's zero sagging, shaking, etc. Adjustments are easy and the arm holds the monitor in place once in position.
Best of all, it's $99 and really easy to install.
>Arctic Z1 Pro
damn mine is the G9 and doesn't look like this weighted for it :(.
Having the hardest time finding a desk mount. I have WALI (33lbs) and the tilt always sags down. The only one I found a the Ergotron HX Heavy-Duty + Tilt + C Clap ~$450. Seems pretty damn steep for a monitor mount :(.
doesn't work: https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
https://www.ergotron.com/en-ca/products/product-details/98-540
In my case, i winded using this monitor arm, it copes well with the weight of a Samsung CRG9 and has literally no flex, just make sure the table is up for the task.
https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1
4 month follow up!
Pros
- 32:9 is fantastic for productivity
- High refresh rate works beautifully in Windows
- Color distortion at the edges of the screen is not noticeable under normal use
- Response time has been great IMO
- Overall viewing experience meets expectations
- The curve is very gentle, so it was easy to get used to
Cons
- I notice some faint horizontal lines on light blue colors; almost like a horizontal-only screen door effect
- The USB-C input does not work at full resolution (which I knew going into it, but it still sucks)
- Settings menu is hot garbage
- There is more ghosting than I would expect on a high refresh rate monitor (even with overdrive at medium)
- KVM does not have a hotkey (e.g. Press "Scrl Lck" twice to switch computers)
- Mac does not play nice with this resolution and high refresh rate (this is a Mac problem, not a monitor problem)
Pro tips
- Find a program that allows you to use a hotkey to move windows. I use “Magnet” on Mac and have binding that arrange my windows into thirds. (CMD+1/2/3 respectively)
- Also - get a better stand. This worked for me.
My Setup
- Both computers display outputs are connected to the monitor using DisplayPort inputs.
- Both computers are connected to a USB-A Switch. The switch output is then connected to the monitor using the provided USB-B cable.
- The monitor is configured to ONLY use the USB-B data line. (i.e. USB-C is disabled).
I would have loved to use the built in KVM properly, but server rack is located such that I need about 20 feet of cable to get to my desk. This length caused mouse stuttering when using USB-C for data and DP for video. I tried a bunch of different things, but ultimately had to switch to using a quality USB 3.0 cable - hence the switch.
The final experience is that my peripherals will switch independently from the display output. But, since the video signal for both is over DP, I can enjoy full resolution. The switch also turned out to be quite handy for using PBP mode, though you could also use a program like Synergy.
Overall
- Productivity is beyond amazing. I don't think I can ever go back from a 32:9 monitor for work.
- Gaming is great. This is my first high refresh rate experience!
- There are rough edges, but most monitors in this form factor have their own issues.
- Shaky support of this resolution is a bummer, but certainly no fault of the monitor(s) themselves.
Don't let my gripes fool you. I absolutely love this monitor.
https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_cp_apa_fabc_sdg7Fb4XMFC17?_encoding=UTF8&psc=1
The Wali single monitor gas arm desk mount, it's on sale right now too..
>For the 49 inch, I used the WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs. VESA 75 and 100 (GSM001XL), Black https://www.amazon.com/dp/B07NLMLLT6/ref=cm\_sw\_r\_em\_apa\_i\_dL4.Eb7PTS333
>
>*it says 35 inch, but it can fit the 49 if it meets the weight requirements. I'd only get this if you don't plan on moving the monitor much though. There are better ones out there, but just more expensive.
>
>For the top two 27 inch monitors, I used VIVO Dual Monitor Stand Up Desk Mount Extra Tall 39 inch Pole | Fully Adjustable Stand for up to 27 inch Screens (STAND-V012) https://www.amazon.com/dp/B01B3GUMM0/ref=cm\_sw\_r\_em\_apa\_i\_UL4.EbYAQ0B4M
>49 inch is a AOC AGON ag493ucx and the top two 27 inch monitors were just basic acer ones I found on amazon for 150 each.
>
>
>
>For the 49 inch, I used the WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs. VESA 75 and 100 (GSM001XL), Black https://www.amazon.com/dp/B07NLMLLT6/ref=cm\_sw\_r\_em\_apa\_i\_dL4.Eb7PTS333
>
>*it says 35 inch, but it can fit the 49 if it meets the weight requirements. I'd only get this if you don't plan on moving the monitor much though. There are better ones out there, but just more expensive.
>
>For the top two 27 inch monitors, I used VIVO Dual Monitor Stand Up Desk Mount Extra Tall 39 inch Pole | Fully Adjustable Stand for up to 27 inch Screens (STAND-V012) https://www.amazon.com/dp/B01B3GUMM0/ref=cm\_sw\_r\_em\_apa\_i\_UL4.EbYAQ0B4M
This one. No sag or anything, easy to adjust
Here you go. Price went up since I got it, but still cheaper.
https://smile.amazon.com/gp/product/B07NLMLLT6/ref=afx_dp_prime_egress?ie=UTF8&fpl=fresh
It's this link https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_cp_apa_fabc_hOy0FbFXA0YNF?_encoding=UTF8&psc=1But I honestly think its the exact same thing cyphersk8 posted just black.
Golly those are expensive. How much does it weigh?
My AGON 49" is supported easily with
Hello, I’m not OP but I got the same monitor and recommend using this arm here. It’s sturdy and it holds up extremely well. My desk is the ikea Linnmon.
WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs, VESA 75 and 100 (GSM001XL)
https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_cp_api_fabt1_rINWFbHNEDTZ4
WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs, VESA 75 and 100 (GSM001XL)
https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_cp_api_fabt1_rINWFbHNEDTZ4
It is pretty expensive but well worth it. This thing doesnt budge once you tighten it up.
https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_cp_api_fabt1_c3aWFbS5ZWG69?_encoding=UTF8&psc=1
WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs, VESA 75 and 100 (GSM001XL), Black https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_cp_api_fabt1_k4aWFbQMQBJ47?_encoding=UTF8&psc=1
I found links in your comment that were not hyperlinked:
I did the honors for you.
^delete ^| ^information ^| ^<3
I don't see this one recommended much, but this works for my G9: https://www.amazon.com/dp/B07NLMLLT6/ref=dp_iou_view_product?ie=UTF8&psc=1 However, you pretty much have to tight the tilt screw all the way, meaning there is no tilt adjustment but this works for my specific use case. Aside from that all other adjustments work no problem.
Here is my standing desk setup with a 49" SUW
I am using this mount from WALI
No issues with sag, is incredibly steading during sit/stand transition. Worth the price imo
(Ignore the bit of a mess I have going on)
This one. Monitor stand: link. Updated my comment above too.
You have to tighten it down, but she holds pretty well.
It is a heavy duty arm, and supports the weight (32 lbs) without issue, although I did have to tighten the tilt bolt pretty tight. I have an electric standing desk and the arm doesn't even wobble when moving the desk up/down. I have the monitor at different relative heights between sitting/standing, and it is a nice smooth motion to move it up or down. 10/10 would recommend.
I also own this arm, but found I preferred the pictured one better because it had a wider height range without having to adjust the pole.
It's a heavy duty monitor arm: https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I'm using this with the G9 right now. The only thing you have to consider is that when you're adjusting the tilt, you will need to compensate a little for the weight of the monitor. So basically have the tilt slightly upward so when you put the monitor on it, the resulting sag will let the monitor become perfectly level.
I did! Here they are:
Primary Monitor Mount - WALI Gas Spring Mount (Single arm)
Vertical Monitor Mount - VIVO Single mount (17" standard pole)
It works really well too! Primary Monitor Mount - WALI Gas Spring Mount (Single arm)
Primary Monitor Mount - WALI Gas Spring Mount (Single arm)
I am using the Walli Single Mount on my AOC 49" monitor and can confirm it works well.
I use the WALI Single Mount for my Dell 49" and have had 0 issues with it. Easy to assemble, no slop in it. Nice adjustment ranges as well.
Currently using this on my AOC Agon 49 - https://www.amazon.com/gp/product/B07NLMLLT6/
You have to tighten the tilt joint (the joint where the VESA mount connects to the arm) VERY tightly to avoid drooping (and you'll need someone holding the monitor steadily in place while you do this), but once that was secured, I'm able to very easily swivel, pivot, adjust height/depth. Super easy to assemble and mount onto my desk, and have had zero issues with it.
and this mount i have it and works great. https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1
i Have this with the lg 38gn950 and works great https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1
This is the arm I have and its really good and holds it like noting. I have the LG 38gn950 https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1 its 100 bucks but you can be sure ill hold it as it have 2 screws insted of one that holds it under desk
Don’t know about those, but have this one. It can handle the CRG9 super ultra wide. Very sturdy.
https://www.amazon.com/dp/B07NLMLLT6?psc=1&ref=ppx_pop_dt_b_product_details
WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs, VESA 75 and 100 (GSM001XL), Black https://smile.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_cp_api_i_5PJyFb0GFS8AE
WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs, VESA 75 and 100 (GSM001XL), Black https://smile.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_cp_api_i_5PJyFb0GFS8AE
Left to Right.. Blue Yeti Microphone
LG 38wk95c
WALI Single Monitor Gas Spring ( https://www.amazon.com/dp/B07NLMLLT6?ref=ppx_pop_mob_ap_share )
Logitech C920 webcam
Desk Pad ( https://www.amazon.ca/dp/B01N2FZRSF/ref=cm_sw_r_cp_apip_hayrNIS7MEuUu )
Vortex Tab 90M keyboard
CalDigit TS3 dock
AirPods
Logitech MX Master 3 mouse
MacBook Pro 2020 13” 10th gen intel i5
TwelveSouth Book Arc laptop stand
Table from CB2 (many years ago!)
No idea where chair is from.
I have the WALI monitor arm holding my CRG9. No issues.
Not at all!
The 49” ultra wide is on this one:
WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs, VESA 75 and 100 (GSM001XL), Black https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_cp_api_i_vDDiFbX1TKWNN
I didn’t need anything too expensive for this one since it was sitting low to the desk, just needed the high weight capacity.
The 32” Asus up high is on this:
Ergotron – LX HD Sit-Stand Desk... https:// www.amazon.com/dp/B00GN4DCR0?ref=ppx_pop_mob_ap_share
I bought the Ergotron because it was the only one that gave me the confidence I needed to put a 30lb monitor that far in the air.
Having now set both of these up, it is obvious why the Ergotron costs 3x as much. The build quality is far superior. The Wali does what I need it to but I almost crushed by thumb trying to adjust it so close to its weight limit.
Thought I'd update. I have my 49" monitor here. Ended up putting it on this mount:
https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
It's strong enough to hold up a monitor this big, and gives flexibility in terms of where to attach it to your desk.
I'm going to end up using 2, 25" ultrawide monitors (LG 25UM58-P) above the 49", using this mount:
Just received this today, but can't speak to its abilities as I'm still waiting on my monitor (AOC AGON 49). It claims to support 33 lbs, and I purchased it after seeing it featured in a review holding the same AOC monitor.
See second image in this article for reference: https://monitorarms.co/best-monitor-arms-for-ultrawide
Thank you! It's a WALI mount from Amazon
Thank you! It's actually the Rama U80-A, I'm really digging it so far. The mount arm is this WALI one from Amazon :)
If you aren't looking for the Ergotron HX (which is the "best"), check out the Wali from amazon. Its currently holding up my CRG9 with no issues, and comes in at 100.
https://www.amazon.com/WALI-Monitor-Adjustable-Capacity-GSM001XL/dp/B07NLMLLT6
i meant, if i remember right, i had the whole desk assembled completely and then i added the support beam (it's 2 pieces that slide into each other and then you have these tiny screws you put through one pipe and it just holds into the other piece). So i could just take it off right now if i wanted without distrubing anything else.
i got the 'wali' tall mount to hold the two 27" monitors and wali for the 49". It doesn't say it supports 49 but someone else reviewed that it worked well enough for trhem and i'm happy with it. I just found them searching through amazon and was happy enough with the reviews to try it and i'm really happy with it. I'm trusting it with my $1500 monitor so i need to be ha.
single: https://www.amazon.com/gp/product/B07NLMLLT6/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
double: https://www.amazon.com/gp/product/B01MZ8H9IN/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
This one can support up to 33 pounds.
And this one can hold two 33 pound monitors.
For the 49 inch, I used the WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs. VESA 75 and 100 (GSM001XL), Black https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_em_apa_i_dL4.Eb7PTS333
*it says 35 inch, but it can fit the 49 if it meets the weight requirements. I'd only get this if you don't plan on moving the monitor much though. There are better ones out there, but just more expensive.
For the top two 27 inch monitors, I used VIVO Dual Monitor Stand Up Desk Mount Extra Tall 39 inch Pole | Fully Adjustable Stand for up to 27 inch Screens (STAND-V012) https://www.amazon.com/dp/B01B3GUMM0/ref=cm_sw_r_em_apa_i_UL4.EbYAQ0B4M
I have not tested this personally on the g9 but the WALI single monitor mount supports 33 lb monitors (or 14.96 kgs) and since the g9 weighs 31.1 lbs (14.1 kgs) it would technically work.
Edit: oh sorry I did not realize your monitor is 49" (124.46 cm), the monitor supports up to 35" (88.9 cm) but hey you never know lol
I bought this long time ago because I needed a cheap stand for an old 3rd monitor I wanted to use . Definitely pretty crappy if you’re looking for good quality. And is definitely not gas . Would definitely not recommend for monitors bigger than 28”. I recommend this brand . Good quality for the price
WALI Single Monitor Gas Spring Desk Mount Heavy Duty Aluminum Fully Adjustable Fit Screen up to 35 inch, 33 lbs. VESA 75 and 100 (GSM001XL), Black https://www.amazon.com/dp/B07NLMLLT6/ref=cm_sw_r_cp_api_glt_fabc_MFRJAA00Q7B8MH2HARKC?_encoding=UTF8&psc=1
Popular alternatives to WALI Single Monitor Gas Spr...
VIVO Dual Monitor Desk Mount, Heavy Duty Fully Adjustable Stand, Fits 2 LCD LED Screens up to 30 inches, Black, STAND-V002
Amazon Basics Single Monitor Stand, Lift Engine Arm Mount, Black
