What are
/r/BalisongClones'
favorite Products & Services?
From 3.5 billion Reddit comments
The most popular Products mentioned in /r/BalisongClones:
The most popular reviews in /r/BalisongClones:
toptens Folding Tactical Trainer Practice Butterfly Knife Metal Steel G10 Handle Bearings Blunt Dull Blade Unsharpened Tool for Safety Improving Skills (Orange) https://www.amazon.ca/dp/B07GNP3SMW/ref=cm_sw_r_cp_api_i_FIoKCbG3ZFXYJ for the mamba clone you need to purchase the item twice and add a note saying you want the live blade version shipped in two pieces. He will refund you a couple bucks to knock it down to $55 canadian after it has shipped. Or that’s what seller told me. I haven’t bought one yet but am planning to get one once i get paid. I know a couple users on here have them. Not sure about quality at all.
this could work. They’re the same thing except 4mm, not 3.7. I have some that aren’t the right thread dimensions and stuff that are 4.7 and they’ll fit length wise so 3.7 is prolly good
hmm it's in stock for me, must not be in the US. This is basically the same thing and a lil cheaper
In terms of amazon
Less than $50 is hard to come by but this one in particular has plastic bushings but metal ball bearings. It's interesting flipping it if u using a torx tool to adjust the screws. The screws will come loose after tons of flipping!
If not, ebay has resellers that will resell the chinese clone to you from the United States so you wont have to wait for shipping.
Aside from that, Aliexpress has tons but you must wait for shipping. 2-3 weeks
Mine goes up to 120 but I'm pretty sure almost anything past 100 volts wont andozie (The color wheel just stops). It was off of Amazon .
Sorry about the late response! Here it is. I am not 100% sure if these are the actual ones but I took the measurements for the Glidr indicators and found these on amazon. They have the same three colors as squid so I assume they buy these 200 packs for 7$ and sell 10 for $5 + $5 Shipping lmao. (If you do end up buying them please lmk if they are the correct ones)
On Amazon! Definitely useful as I have been slowly getting more and more hardware and extra parts.
Electronics Organizer Travel Cable Organizer Bag with 5 PCS Reusable Fastening Cable Ties Double Layer Pouch Electronic Accessories Carry Case for Cable, Cord, Charger, Flash Drive, Phone, Ipad Mini,SD Card (Black) https://www.amazon.com/dp/B087JMTW7Y/ref=cm_sw_r_cp_api_i_KZSBEYDD75WFXZX12A9J?_encoding=UTF8&psc=1
These are what I usually use
MonsterBolts - M3 x 6mm Socket Head Screws, DIN 912, Stainless Steel, 10 Pack https://www.amazon.com/dp/B078LBVG2C/ref=cm_sw_r_cp_api_i_GKRSB5X9BKK0BHHCDM6N?_encoding=UTF8&psc=1
Replaced the screws and got the best bushings for it.
For anyone who wants the screws, Here
try these out if those end up sucking.
also do u have the channel or sandwich orca?
m2.5 5mm I believe. I literally just found a listing for better screws too, here: https://www.amazon.com/gp/product/B07RSN4WDL/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1
definitely gonna wanna replace them. thankfully it comes with spares but they strip very easily
uxcell M3x6mm Thread Button Head... https://www.amazon.com/dp/B01B1OD0IC?ref=ppx_pop_mob_ap_share
^pivot screws
uxcell M2x4mm Thread Button Head... https://www.amazon.com/dp/B01B1OD83Y?ref=ppx_pop_mob_ap_share
^body screws
They work on most of the clones I’ve tried too
(10) M3-0.50 x 6mm - Socket Head Cap Screws, Stainless Steel Grade A2 (18-8), DIN 912 / ISO 4762, Hex (Allen) Key Drive - MonsterBolts (10, M3 x 6mm) https://www.amazon.com/dp/B078LBVG2C/ref=cm_sw_r_cp_api_glt_fabc_XQPNTB199JN5VC2J32W1?_encoding=UTF8&psc=1
Amazon have good balisong for beginners
Nabalis https://www.amazon.com/dp/B08QCLNNS9/ref=cm_sw_r_awdo_navT_g_TM4K6664P7VBP8VQ4EJ4
Marcolo bm clone https://www.amazon.com/dp/B09GS7KRX9/ref=cm_sw_r_awdo_navT_g_57X1DA9SN3R1KW7XNWWQ I realy like this one for 20 bucks is nuts
uxcell M3x6mm Thread Button Head Hex Socket Cap Screw Bolt 100pcs https://www.amazon.com/dp/B01B1OD0IC/ref=cm_sw_r_cp_api_glt_fabc_92ECSXWANMNZCCV8N5BQ?_encoding=UTF8&psc=1
Pivot screws
uxcell M2x4mm Thread Button Head Hex Socket Cap Screw Bolt 100pcs https://www.amazon.com/dp/B01B1OD83Y/ref=cm_sw_r_cp_api_glt_fabc_46QY7B0S80CKRNBMWYDZ?_encoding=UTF8&psc=1
Body screws
I used a wire brush wheel attached to a drill and just ran it along the handles until it had an even finish. Pretty easy if you have a drill.
TILAX Wire Brush Wheel Cup Brush... https://www.amazon.com/dp/B07Z4NLJ2Y?ref=ppx_pop_mob_ap_share
I’d actually recommend this clone. It’s a shitty BRS Rep clone, but holy shit is it a good flipper. I love it so much I even ordered a second one lmao: https://www.amazon.com/dp/B08VJ1YHJB/ref=cm_sw_r_cp_api_glt_fabc_JKSYKVCMW831R80Z0NRK?_encoding=UTF8&psc=1
Here’s the link lol, idk how u didn’t see this
Edit: and I know it’s not heavy but it’s better then those 3 u showed, in my opinion, just a recommendation btw
https://www.amazon.com/dp/B00OBV1JC2?psc=1&ref=ppx_yo2_dt_b_product_details
I bought this and it is it was larger than I expected for a pretty low price. The container is about 5-6 inches in length for a few bucks if that is something you are interested in. It works great so far after trying a few oils, no complaints.
In the hardware guide they said m3 5.5mm-6mmand this is what i found on amazon And they said M2 3.7mm for the body screws but i cant find any that are 3.7mm exact but i think the 3.7mm is the length so i think 4mm would work you would just need to shorten themand these are what i found
This one is solid and feels premium with a bit of tuning but really heavy at 8 oz . However I feel like this is one of the best trainers on Amazon from my experience . Sturdy and good overall trainer .
toptens Folding Tactical Training Practice Flip Metal Steel G10 Handle Bearings Blunt Dull Blade Unsharpened Tool for Safety Improving Skills (Red) https://www.amazon.com/dp/B07GNR47DQ/ref=cm_sw_r_cp_api_i_k9uKEbW2G4Z4B
u can get almost the exact same trainer on amazon. u can find it here: https://www.amazon.com/Andux-Land-Titanium-Alloy-Lightweight/dp/B07KWPS1SP/ref=mp_s_a_1_16?keywords=andux+trainer&qid=1567651396&s=gateway&sr=8-16#aw-udpv3-customer-reviews_feature_div
the reviews are iffy but it looks good, albeit with classic ccc problems like ass screws and low quality bearings
Yes you can also get it on Amazon, that's what I did https://www.amazon.com/HIDIZS-Portable-Headphone-Amplifier-Smartphone/dp/B07F2DTTGT/ref=mp_s_a_1_1?ie=UTF8&qid=1545108462&sr=8-1-spons&pi=AC_SX236_SY340_FMwebp_QL65&keywords=hidizs&psc=1 I assume you live in the us so here's the .com link it's also on Amazon.ca