What are /r/NewVapeFlowerPot's favorite Products & Services?

From 3.5 billion Reddit comments

I’d definitely use Distilled Water to dilute the Cranberry Extract. - Distilled Water at Walmart is 90c/gallon. - I’d get a dropper, and dilute at your own taste. - I try to mix around 5mL Cranberry Extract to 20mL Distilled Water.- YMMV. -Solution should be a light pink.- Then you add to your rig, with a dropper, on top of your rig water.- Water will look like a really very diluted tea.- Remember Cranberry Extract is very strong. - Always better dilute it!!!.- Cranberry flavor should be really light, almost imperceptible when you do a non vaping inhaling test.- I hope this helps. - Always try to find Pure Unsweetened Cranberry Extract.- Doesn’t matter organic or not.- If it’s going to be used as disposable, the cheaper the better.-

Swisse Ultiboost Super Potent Cranberry Concentrate Liquid Supplement | Urinary Tract Health Support, Antioxidant Rich | Naturally Sweetened with No Added Sugar | 300 Ml, 10.1 Fl. Oz https://www.amazon.com/dp/B07RZY36SF/ref=cm_sw_r_cp_api_glc_fabc_Ep5bGb4P5VS53

Just ordered some SiC balls from Amazon

SiC Balls

I bought these back in 2016 and I still have over 70ish from just soaking in iso. I run through a bunch a day just because it makes it smoother and I have so much.

I don’t believe so

This is the inverter

Looks like some oil or something that dripped, or grazed the WeedEater for a second. If you go very high on the temperature, and you stay at a high temperature for a time, you’ll heat anodize your Ti WeedEater, and it can pass the blue/purple hue, to a dull space grey, and there’s no turning back after that. I’ll avoid any metal brush as well. Titanium can be scratched too. It happened to me and many people before. Set the controller to the hottest temperature that you can touch with your bare hand (around 150F??), then get a soft 3M or similar cleaning pad. The softest the better. Get some ISO. Soak a piece of the pad in ISO and clean the warmed up WeedEater head. After all is gone, disassemble the WeedEater, clean it well with soap and rinse well. I do a final ISO rinse, just because. That will take care of it. Stay vaped. Mantente de la mente!!! Scotch-Brite Non-Scratch Scour Pads https://www.amazon.com/dp/B0196H6TKM/ref=cm_sw_r_cp_api_glt_fabc_99CQAZ4ECMNEHZZN11ZA

So easy to load several EQ basket screens. Very nice for little parties. No need to check on people that don’t know how to use the FP heads. Just preload the 15pcs baskets, set SH, WE or VROD to 666F and go to town. 15 people party example. 1 basket = 0.03g (+-0.01g) aprox 15 baskets = 0.45g (+-0.15g) aprox 1/2g for 15 bong rips, not bad at all!!! Let’s say you’ll “get stoned” 15 people with exactly measured 7 bong hits each, from an 1/8oz=3.5g. 1 bong hit per person= 0.45g(15 loaded baskets) aprox. 7 bong hits per person= 0.25g (+-0.15g) aprox Just tap/dump and reload. No stirring needed, no capping, no need to check if people will combust. Very easy to not worry of newbies combusting, so you can enjoy yourself 😂😂🤣🤣 Be sure you have the 18mm Ti bowl post, on the other hand, if you have a 14mm bowl post, you’ll need to smush/squeeze the basket screens, or buy EVO ELBs caps, that are way more expensive than EQ baskets screens. I set the 15 people example, because that’s the number of screens that come in the package, but stay safe and healthy, and follow COVID measures please. Stay vaped! Mantente de la mente!

Stanker 0.5 Inch Premium Diameter Stainless Steel Metal Screen with Metal Box https://www.amazon.com/dp/B07L4HT1KM/ref=cm_sw_r_cp_api_i_xkRnFb7B5W3Y0

p.s: many offers everywhere, here’s the first that showed up at amazon. Good luck.