Something like this. They usually have them at tobacco stores and headshops.
I swear by this stuff! Just soak it overnight and rinse.
Get some plugs
https://www.amazon.com/Universal-Cleaning-BPerfect-Storage-Proofing/dp/B07WGSYSNQ
, and just use a whole bottle of non salt cleaner and let that baby sit overnight, plugged up and completely full(just like i like my women). I have a whole collection and it’s the only way i’ve been able to get the middle.
Big pieces expensive :/
I turn down flame a bit. My Hemp lighters basically shelved.
For the diamond hole saws you're gonna need for the spacer/grommet
Not really. But I got my power tools off Amazon tho. The power drill I used is similar to this... Trust me, you're gonna want tools...
Buy glass .........but 420 Orange cleaner may help. It is basically alcohol and rock salt with a nice citrus scent. Or just use alcohol and rock salt....again , next time buy glass. https://www.amazon.com/Formula-420-Cleaner-Ceramic-Bottles/dp/B006141CYC/ref=sr\_1\_1\_sspa?keywords=420+glass+cleaner&qid=1655640253&sr=8-1-spons&psc=1&smid=A1W9X04VABBMZU&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFEVEdRMUdYV1pOVVomZW5jc...
I bought an industrial grade diamond hole saw set which is perfect for glass. Bought it on Amazon for $7.99diamond drill bit
Try these!
Hookah Hose Grommets Shisha Hose Grommet(10pcs) https://www.amazon.com/dp/B07H5LQKZH/ref=cm_sw_r_apan_i_Z9Z75YHDNMWW4SSDM7XF?_encoding=UTF8&psc=1
Shisha grommets! You might be able to pick one up at your local smoke shop, but make sure they're thin and easily manipulated like these. Some are thick and plastic like so they don't have any give or stretch.
These will just slide up your downstem until you get to the sandblasted part. Give it a little shimmy to work it up just a but more, then slide the stem with the grommet into the hole!
I just bought the bong. Heading to the girlfriends now to check it out. They kinda lied the “carry case” is actually a pretty flimsy bag kinda like this with a gear logo https://www.amazon.ca/BagBase-Budget-Resistant-Sports-Drawstring/dp/B00I59MHA4/ref=asc_df_B00I59MHA4/?tag=googlemobshop-20&linkCode=df0&hvadid=292921465911&hvpos=&hvnetw=g&hvrand=8246946018245911877&hvpone=&hvptwo=&...
Here's what I use to clean mines... It's done a perfect job so far, reaching all corners usually difficult to clean.
Orange Chronic Cleaner Lot de 2 flacons de nettoyant 473 ml https://www.amazon.ca/dp/B009QD3JPK/ref=cm_sw_r_awdo_6PP014TDHP9KCPQ83YH6
No, Get this 18mm. Never go down in size. Water just over all percs alittle for starters
Had like 10 before but this is the only one that didn‘t break so far, throws pollen easily still after two years and has a removable sieve for cleaning.
Ok I was once in this situation and the ghetto solution I utilized was this and some duck tape worked for months till I got a new piece!
Silicone Stretch Lids, Durable &... https://www.amazon.com/dp/B07H2478JS?ref=ppx_pop_mob_ap_share
I got 2 ash catchers from Amazon that's pretty good.
https://www.amazon.com/dp/B09BHNWBKN?ref=ppx_pop_mob_ap_share
(The picture actually shows the 2 percs in the wrong order)
https://www.amazon.com/dp/B09FL1DB3R?ref=ppx_pop_mob_ap_share
Also, they have cheap bad ass bongs and ash catchers on eBay too.
Is it more cone or triangular shaped? These are the ones I have. Tech Universal Cleaning Plugs + Caps BPerfect for Storage, Cleaning and Odor Proofing Glass Water Pipes/Rigs (1 Large+2 Medium) https://www.amazon.com/dp/B07WGSYSNQ/ref=cm_sw_r_apan_glt_fabc_A9CC3C173DA4HFTAPEF4?_encoding=UTF8&psc=1
I actually have a bong with the same downstem setup. I have had no luck in getting it to work properly. Even if you get a downstem that reaches the bottom, the water gets sucked out so it won't cover the end of the downstem anyways. Either get an 18mm bowl/banger or get a 18mm to 14mm adapter, found here
No problem. Oh another thing I forgot to mention. I also use these when I clean my pieces. With the exception of the Merlin as it is obviously way to small. These cleaning plugs have been a godsend with cleaning especially the larger pieces.
If you are looking to use household items, 99% Isopropyl and salt always does the trick. Otherwise Boiling your bong will also work fairly well. Trade-off, it can be smelly and time-consuming.
Amazon has some great choices. I liked to stay away from Alcohol base products since I inhale out of my device. Ironically enough, My relative developed a safer alternative Pipe Cleaner that I have tested and works pretty damn good. I think the branding is pretty sick. Scoobie Snack Piece Cleaner. Link below. Works well for Bongs but even better for pieces!
For all my stoner friends :)
https://www.amazon.com/dp/B08SYNFW3M
I get that thought every time i see one of those wood smokers on amazon I'll link one lol https://www.amazon.co.uk/FrideMok-Smoking-Generator-Portable-Molecular/dp/B07KS8N5B8/ref=mp_s_a_1_40?dchild=1&keywords=wood+smoker+bbq&qid=1627314343&sprefix=wood+smoker+&sr=8-40 Like a sick ass hookah
If you are able to stretch your budget/ find a few pennies (if you're in the UK, would that be cents for USA?) then you would do well with decanter cleaning beads.
They last forever as they are rust proof steel balls that are designed to be placed in a vase or decanter, along with lemon juice or vinegar (distilled/white only) and swirled around. This cuts through any build up internally and cleans the glass- just remember when you tip them out to catch them in a strainer and not let them flow down the plug hole!
Here's a link to Amazon- it's .co.uk so sorry if you're not in the UK, it is just to show you what you should look for (and I hate that I have to say this but it's non affiliate, I believe knowledge should be shared for free).
https://www.amazon.co.uk/Ecooe-Rustproof-Stainless-Decanters-Glassware/dp/B01MYX2GXO
Grimm SUPA 50 Brass Pipe Screens - 3/4" (.75) Pipe Screen Filters https://www.amazon.com/dp/B01CBSB7Z0/ref=cm_sw_r_cp_api_i_0P3JFb2K1X7R7?_encoding=UTF8&psc=1
I use these personally, had them a few months and still have plenty to go through. I smoke daily with the exception of regular business hours. Hope this helps.
Also, if see “glass jacks”...eff glass jacks. Just my personal opinion.
Good Vibes Good Vibes Good Vibes
I have a piece similar to this and was using it for two years before I figured out the. Best way to clean it. Bad news is, the shower head percs are the hardest to get fully clean so from my experience the percs will never look brand new, I've tried literally everything on the market.
The thing that worked the best for my piece is acetone, boiling water and kosher salt. You want to alternate the boiling water and acetone soaks so you can loosen up the rez in the perc stems. Put two of those resolution caps on the end or use plastic wrap and rubber bands if you don't have caps and SHAKE THE SHIT outta thing thing. It took me a few hours for my piece to look the best it's ever looked. After you're done you wanna flush the shit out if it with boiling water so the acetone evaporates and rinses out until you feel like it doesn't smell like any chemicals at all on bottom or top.
Next best thing is this glass cleaner I've also used this cleaner and it works really well but it takes longer you have to soak over night.
Ppl say "just use some iso" but nah once the rez gets caked inside those percs it's a major pain in the ass to let them clean. I recommend an ash catcher to cut down on the shit getting pulled into the actual piece. I've used everything on the market 420 cleaner is ok but over hyped in my opinion. I prefer plant based cleaners or acetone.
As previously mentioned if it’s not a high percentage it probably won’t work very well, if you can’t find high percentage ISO in stores I’d recommend a brand like Orange Chronic or something similar
Orange Chronic Cleaner 16 oz Pack of 2 https://www.amazon.ca/dp/B009QD3JPK/ref=cm_sw_r_cp_api_i_y2-qFbAGZNSSA
do you think this would be fine to use strictly to clean my pieces, I'm not hoping to use it in a home first aid sense, just to clean my shit, is the 99% too strong? Otherwise I can't afford to drop $20 on an industrial amount of rubbing alcohol or overpay for 70% bullshit I can get in town.
So... I was bored and just messing around, I came across this U-shaped Wine Decanter https://smile.amazon.com/dp/B01FJ0KAOQ/... and thought, what if someone were to drill a hole in the U-bend, insert a rubber grommet and downstem, and turn this thing into a bong? Would this idea actually work? Would anyone actually try building this (for science/for fun)? (Pardon the image, I just did a quick Photoshop using stock images, just to illustrate my idea)