What are
/r/Camry's
favorite Products & Services?
From 3.5 billion Reddit comments
The most popular Products mentioned in /r/Camry:
The most popular Services mentioned in /r/Camry:
The most popular reviews in /r/Camry:
It's a little thing, but I got this for my center console. I love how it has helped keep me organized.
Vehicle OCD - Center Console Organizer for Toyota Camry (2020-2021) All Models and Toyota Camry XLE, XSE (2018-2019) - Made in USA https://www.amazon.com/dp/B074PD11N1/ref=cm_sw_r_apan_glt_fabc_S1GRG0N2N211BVKK9B6B
Now, just get this frameless black silicone plate holder. I have this on my car. Looks really good with my state issued blackout license plate, too.
Rightcar Solutions Flawless Silicone License Plate Frame - Rust-Proof. Rattle-Proof. Weather-Proof. - Black https://www.amazon.com/dp/B07CV5PLFM/ref=cm_sw_r_cp_api_glc_fabc_uMYbGb6QX6ZVP?_encoding=UTF8&psc=1
i replaced my 2018 xse lights with these ones, https://www.amazon.com/dp/B0186P1MUW/ref=cm_sw_r_cp_api_glc_fabc_COO8FbW7PQVXK?_encoding=UTF8&psc=1
pretty much it's the 194/168 led bulbs.
the trunk i actually removed the light bulb and use this LED strip for better lighting.
Sure! I found the headlights on Carid.com, but then looked and found them for a lower price on Amazon. I think they're out of stock at the moment though, either way here's the link!
For Camry Sequentiel LED Turn Signal+3D DRL Projector Headlight/Lamps (Black) https://www.amazon.com/dp/B07C4PS7WF/ref=cm_sw_r_cp_apa_i_0HMhDb4V25NXC
In my experience, they pump faster than the 12v outlet compressors. These hook onto the battery terminals and are really fast. I've had the same one for 5 years and picked up another for the other car. I'll put a link below. Mine was $60 at Menards last year.
Limited-time deal: CarlinKit 2.0 Wireless CarPlay Adapter USB for Factory Wired CarPlay Cars (Model Year: 2019 to 2020), Wireless CarPlay Dongle Convert Wired to Wireless CarPlay https://www.amazon.com/dp/B08P1GWQDB/ref=cm_sw_r_cp_api_glt_fabc_dl_JXYK1QNA7GD37305618D
The reason I got this one, is it uses a separate USB to USB-C cable, because if you get the one with the connected cable and the cable gets worn and doesn’t work, your whole unit is toast. With this one, just get a new usb c cable and you’ll be good
Dashboard Cover Dash Cover Mat Pad Custom Fit for Toyota Camry 2007 2008 2009 2010 2011 (Black) Y27 https://www.amazon.com/dp/B07V64ZGLS/ref=cm_sw_r_cp_apip_yjUeTtR32ey2B
Gotta love that sticky dash hahah, here’s the one I got. But keep in mind this picture was after the car was sitting for few months so the heat had time to get all the wrinkles out, although it’s still pretty good out of the box
Also , if you're looking for LED bulbs to go along, these lenses take H7 bulbs and these Aukee ones fit in the housing perfectly with no modification.
They sell stuff like this that's essentially rubber grip, but it usually comes in a set:
Trunk Spoiler Compatible With 2007-2011 Toyota Camry, JDM Style Matte Black ABS Added On Rear Lip Wing by IKON MOTORSPORTS, 2008 2009 2010 https://www.amazon.com/dp/B079BGJJMS/ref=cm_sw_r_cp_apip_bKaMESp4QHvWP
ACDelco Black/Gray Ergonomic Sports Grip Carbon Fiber Leather Steering Wheel Cover for Standard Sizes 14.5 15 15.5 (Black - Red Stitching) https://www.amazon.com/dp/B079TJBQKR/ref=cm_sw_r_cp_api_fabt1_INjQFbXSCDWTQ?_encoding=UTF8&psc=1
2006 and newer Sonata wheel should fit the Camry. The bolt pattern are the same (5x114.3). The Sonata's center bore (the big hold in the middle of the wheel) is bigger than the Camry's hub (67.1mm vs 60.1mm so it would fit over just fine. I do recommend centering rings like these on Amazon so that the Hyundai wheels sits center on the Camry hubs to prevent possible vibration. 205/60-16 tires were an optional size on the XLE Camry so your speedometer should stay the same. Also check if the wheel spoke touches the brake calipers. If everything clears (min 2mm) you're good to go.
Lubegard 19610 Instant Shudder Fixx, 2 oz. https://www.amazon.com/dp/B0002JMLQU/ref=cm_sw_r_cp_api_i_IRioFbVZBF41P
This is the tube, and I do a lot of city stop and go traffic so I change mine every 25k-30k miles.
It's the Toyota emblem. Link here. I liked them because it replaces the OEM puddle lights, so I didn't have to deal with a tape strip or sensor.
You can buy an air wedge and probe from amazon?
Or you can call a locksmith who will use those exact tools and open your door in less than 30 seconds. I was amazed how fast he got in...
We had the same problem and found this one on Amazon that attaches with a suction cup to the back glass. Baby Car Backseat Mirror, Rear... https://www.amazon.com/dp/B07M59G5VN?ref=ppx_pop_mob_ap_share
You can do it with a cotton q-tip and rubbing alcohol, but for this type of deck this would be easier.
Congrats on the car!!! This post makes my ADHD so happy!
Every car should have a co-pilot!!
I feel your excitement and struggle. I use to own a '96 Camry a few years ago and we're gonna get your ol lady looking 20 years younger! I would start with a rim and two tires if you can, so you can wear em down evenly. Then on to hubcaps. You can get multiple sets if you wanna change the look. Then a wash and wax to get it a good shine.
And personally, I'd move onto interior accessories. Full coverage seat covers, trim pieces, organizers, phone mounts, stereo and bluetooth. Small luxuries are just next level serotonin banks.
##If you're considering vinyl wrapping, I'd love to see what she looks like with the top and mirrors wrapped.
I'd love to see an update whenever you do whatever you go with!
Foglights: LEDIN Fog Lights Kit Compatible... https://www.amazon.com/dp/B09S5MMQ81?ref=ppx_pop_mob_ap_share
Yes I installed them myself. Took aprox 4hours. Had to modify bumper cover a little but was pretty easy since the bumper cover is plastic.
Video I used for install: https://youtu.be/2OMeFgM198U
I had a 2015 Camry with the standard bulb like that and I opt'd to get the plug in LED lights. Something like this where the entire ballast just fits right the bulb would have gone. Super easy install.
Highly recommend this device. It should work with any wired carplay radio to add wireless. I swap it back and forth between my Hyundai Sonata and Honda CR-V.
OTTOCAST Wireless CarPlay Adapter... https://www.amazon.com/dp/B09Q65SX47?ref=ppx_pop_mob_ap_share
It has wireless apple/Android. I only had it about two weeks before I was rear ended and my car was totaled, but the screen was great and I had no issues with it. It blended in and looked great.
The only thing that didn't work great was phone calls. My wife said it sounded horrible. It did come with a mic to plugin and put near the driver's visor, but I didn't use it because is stuck out like a sore thumb and looked ugly.
https://www.amazon.com/gp/product/B099RFRPDB/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&th=1
these are great if yours is 2018-2022
I guess I should add some potentially helpful tips for anyone that comes across this. We were able to get an extra 2+ years out of our 2012 Camry Hybrid 12v battery by spending ~$30 on this battery charger from Amazon (it's currently $25.99 today on Aug 21, 2022 so even cheaper than I paid back in May 2020).
We were living up in the Northeast in 2020 and our first winter up there killed the battery. I used my multimeter to check the voltage and it was under 11 volts. Like the battery should've been unrevivable according to everything I read online.
I used that cheap battery charger's "repair" function, which does a low amp trickle charge, for like 24+ hours and it brought the battery back to life. I periodically checked the voltage of the battery with the multimeter and it stayed above the healthy threshold (12.5+ volts I think?). And then it wasn't until today, on a regular unremarkable August day in the midwest, that the car just wouldn't start and the battery is now reading ~11.2 volts.
I have it hooked up to that battery charger again so we'll see if I can bring it back from the dead once more just for the sake of moving it out of the way in our driveway.
Anyway, hope this can help someone else get a few extra days, weeks, or years out of their hybrid 12v!
BOODLIED 2X 24Inches Flexible... https://www.amazon.com/dp/B07KK3Z4VJ?ref=ppx_pop_mob_ap_share Thank you it’s just a simple light strip they are sequential so the blinker like moves I really like them weren’t hard to install either
I am using the following dash cam in my 22 Corolla Hybrid. You can mount it under the center mirror/camera/sensor block.
For cabin air filter, any basic compatible charcoal filter is fine.
I personally suggest changing the cabin filter every 2-3 months depending on your area's dust and humidity levels.
For engine air filter, I suggest an OEM one from a parts store.
I got this stereo system last month. Easy installation, wireless carplay and android auto, great fit. Overall I am happy with the purchase and I highly recommend this if you are looking for an upgrade !
Incase the link does not open, it is from Dasaita - 10.2'' Android Car Stereo System
Any thoughts on using this one? https://www.amazon.com/OTTOCAST-Wireless-Android-Adapter-U2-X/dp/B09V7CNMRX
​
It's like $100 cheaper... anyone else used it?
This one?
https://www.amazon.com/OTTOCAST-Wireless-Android-Adapter-U2-X/dp/B09V7CNMRX
Anyone else have experience with this? My wife has a 2022 Highlander and each time I step back into my 2018 Camry, my life gets a little more sad, haha.
I searched for the same thing. There was a recall for those but it only covered certain VIN numbers (mine wasn't covered). You can go the correct route and purchase a new dash. It seemed to complicated to install and too expensive for a car that old. So I just bought a dash cover from amazon for 30$.
​
I have this vent mount on my Camry and it works well: iOttie Easy One Touch 4 Air Vent Universal Car Mount Phone Holder, For iPhone, Samsung, Moto, Huawei, Nokia, LG, Smartphones https://www.amazon.com/dp/B076BCHB82/ref=cm_sw_r_cp_api_i_BGQH2283GB7RWBTAFPDD?_encoding=UTF8&psc=1
Gloss Black Fuel Tank Cover Trim Oil Cap Accessories Replace for 2018-2021 2022 Toyota Camry https://www.amazon.com/dp/B09WMFXC24/ref=cm_sw_r_cp_api_i_QS9H7E3YFPY1V2NGB4VW?_encoding=UTF8&psc=1
Here’s a start. Look in the item description for the store where they have more accessories for the Camry. Door handle guards, interior trims, window gills, etc.
I have the exact same car. Can you share what you used to wipe and wax. I saw you say 6 mitts Something like this?
In my main comment I left a ToyotaNation post will lots of resources including the Amazon link - in case you need those.
Here's the Amazon posting directly tho :)
https://www.amazon.com/Wireless-Explotec-Applepie-Qualcomm-Bluetooth/dp/B09JYJW43X
Same! Get the lasfit error free — LASFIT 7443 LED Bulb CANBUS Ready 7444 T20 Turn Signal Light Error Free Blinker Anti Hyper Flash, No Load Resistor Need, Upgraded Automotive Replacement Bulb- Amber Yellow (Pack of 2) https://smile.amazon.com/dp/B07KXSTLQQ/ref=cm_sw_r_cp_api_i_KS21MSM18FC34Q21BHB6?_encoding=UTF8&psc=1
Tape on Outside Mount Window Visor With Chrome Trim Compatible With 2018-2022 Toyota Camry, Acrylic Smoke/Tinted Air Deflector Sun Rain Guard 4pcs by IKON MOTORSPORTS, 2019 2020 https://www.amazon.ca/dp/B07GBP8ZWZ/ref=cm_sw_r_apan_i_FKJRX0DAKEXXSW8BM2NP?_encoding=UTF8&psc=1
Manfox 3PCS Blackout Emblems Tailgate Insert Letters Decal Overlays, ABS Adhesive Badges Stickers Replacement for 2019 2020 2021 2022 (Matte Black) https://www.amazon.com/dp/B09LHDP224/ref=cm_sw_r_cp_api_i_9TEMPP5YY8X31XCNM129
inginuity time LED Tail Lights For Toyota Camry 2018 2019 2020 Clear Rear Lamps Animation DRL Brake Turn Signal Assembly Clear Lens (Clear) https://www.amazon.com/dp/B08RMS5GQD/ref=cm_sw_r_cp_api_glt_i_3QXJF9T1RC7EJPF55HE1?_encoding=UTF8&psc=1
Yeah there's a black mesh in the grill that i custom fit. Didn't like the plastic pieces going across so i cut those out and used the same edge part that attaches to the bumper. Not quite sure which video there is for this, i just did it lol. This is the mesh i used, got it from amazon! AUTOT 40"x13" Car Grill Mesh... https://www.amazon.com/dp/B07LC7CT9Q?ref=ppx_pop_mob_ap_share
Found the 2012 -14 version
VLAND LED Projector Headlights Compatible with Toyota Camry 2012-2014 US-Specs Version, High Beam Come with H7 Halogen, Low Beam Fits D2S LED Bulbs( Not Included) https://www.amazon.com/dp/B07ZYFPVGK/ref=cm_sw_r_apan_glt_i_3Q2ES9WFDP7HDA8K251Z
This one https://www.amazon.com/dp/B08MC72ZTH?ref=ppx_pop_mob_ap_share.
However, I opened it up to swap out the LED bar, originally it's pretty dim and connects to the side marker light, so it only lights up at night. I swapped it with WS2812b RGB strip and power it from an empty slot in my fuse box, controlled by an Arduino and optocoupler board. I also modded it a little so I can put LED bulbs in and have the heat vented outside
My wheels does not look like the one in the picture :(. It look like this one right here https://www.amazon.com/gp/product/B09JQNBNWS/ref=ox_sc_act_title_3?smid=A2Q85U05ZPU8LF&psc=1. I do not wanna do vinyl wrap but I might have to been searching around for a while and still can't find one :(
hey it looks like my Camry lmao
it's made by Vland but sold under different brands (Mine was sold under ECCPP but came in Vland packaging), I'll leave the Amazon link I bought from on the bottom of this comment.
One thing tho, the Lexus light bar plugs into side marker light, so it only lights up at night when your side marker lights turn on. I went through all the hassle, opened it up, replaced the original LED with some WS2812b strips so it's bright enough to be seen during daytime and run some arduino and boards to have it turn on when the car is on and add sequential signal light to it
Not sure if they are the same, but they look close to the ones I have. I got them on Amazon.
Car LED Strip Lights, LEDCARE Multicolor RGB Car Interior Lights, 16 Million Colors 5 in 1 with 236 inches Fiber Optic, Ambient Lighting Kits, Sound Active Function and Wireless Bluetooth APP Control https://www.amazon.com/dp/B08F9PF2Y5/ref=cm_sw_r_cp_api_glt_fabc_144DQK45HDB3ZZTSXF11?_encoding=UTF8&psc=1
Cuztom Tuning JDM 3D Style Smoked Window Visor Vent Shade Compatible for Fits 2007-2011 Toyota Camry LE SE https://www.amazon.com/dp/B010JRK19S/ref=cm_sw_r_cp_api_glt_fabc_XE2V6XPZMCFZ6SKWSAAZ?_encoding=UTF8&psc=1
KBH Auto Center Console Armrest Cover for Toyota Camry 2007-2011 Vinyl Microfiber Leather Console Replacement Bisque https://www.amazon.com/dp/B08GC2NH7J/ref=cm_sw_r_cp_api_glt_fabc_01T8BM3HSV0J3RV5YRS1?_encoding=UTF8&psc=1
This is for my color, bisque
As you mentioned, the high beams work at 12v while the DRLs work at 6v or something low enough to where the LED malfunctions. Most of the LEDs function at strictly 12v, and they don’t change voltage.
I spend a lot of time and money buying numerous bulbs and testing them out. Along with he harness for getting the DRLs working. My biggest issue was the DRLs wouldn’t light up evenly on both sides in addition to flickering or not working DRL mode at all.
So this is the setup that works perfectly for me. Been running it for a year now with no issues. I am not saying these are the only bulbs that work, but after buying so many pairs and testing, these are the only ones that I found worked. Maybe there’s newer ones out there since then that may work too.
Please let me know if you need any help!
Load resister harness: https://www.amazon.com/dp/B088K81C9R/ref=cm_sw_r_cp_api_glt_fabc_XA291A8FTC2FHAVTWB7Q
I’ve been using the Carlink one. 2021 Wireless CarPlay Adapter CarlinKit 3.0 for Factory Wired CarPlay Cars Model Year: 2017 to 2018, For Volvo VW Audi Ford Sync 3 Mazda Mercedes Honda Chevy Subaru Porsche Hyundai Kia Lexus Gmc Acura https://www.amazon.com/dp/B08P18TSCT/ref=cm_sw_r_cp_api_glt_fabc_4B2HCD0G4VJ4JBTFP9TC?psc=1. This one has been great for me, I have a 2021 XSE. It has the typical few second lag, but other than that i’ve had no issues and it has been really convenient.
It was a direct plug in. Easy to install. I did have to remove the battery tho because I couldn’t fit my hand into the driver side.
Here’s the link: ZonCar 9006/HB4 LED Bulbs 15000 Lumens, 400% Brightness Super Bright, 6500K Cool White, Fog Light, Quick Installation, Pack of 2 https://www.amazon.com/dp/B081YX8LLV/ref=cm_sw_r_cp_api_glt_fabc_4EZNZMP39V6TYSG1N8TX
Then there's no need to get a XSE. Here's 2 different type of taillights you can buy, they also have an animation when you start the car up. You can look at videos of it in YouTube.
Lexus Style https://www.amazon.com/dp/B08V1D83K7/ref=cm_sw_r_apan_glt_fabc_WRJ4Z1PFPZDBS3J9H38V
Nike Style (Mine. I got the smoked version) https://www.amazon.com/dp/B09FL13L3S/ref=cm_sw_r_apan_glt_fabc_DCF5G8NK4Q8YENF8SCHC
Here's a good DIY. There's also tons of DIY on youtube.
Don't cheap out and by cheap ebay valve cover gasket (I learn that the hard way.) Felpro (check that it's USA made) or OEM are the best choice. Don't forget the four spark plug tube seals. You may also want to buy a new distributor/camshaft plug since they're rubber coated and can be hard to reseal the old one once they have been compressed. Any FIPG (foam in place gasket) will work to seal the corners, plug, and half moons. I use Permatex grey which is similar to the original Toyota FIPG. (The pricier Permatex Right stuff will work and dry faster).
When you're ready to tighten the valve cover nuts down, torque them to 17 ft lb. (33 ft lb was the wrong spec in the FSM) After a couple days, check the torque on the nuts again. The valve cover gasket will compress and the nut will be loose. You'll have to check it a few times for the first month until they still tight. It's a got habit to check them during an oil change since they are know to back off.
Good luck on the job.
Tape-On Dark Tinted Side Window Visor Deflectors Vent Rain Guards Compatible with Toyota Camry 2018 2019 2020 2021 2022 XV70 for All Trims L LE SE XLE XSE Hybrid https://www.amazon.com/dp/B08JQ448L6/ref=cm_sw_r_cp_api_glt_fabc_3S30VMHXJVB33XXE99K4?_encoding=UTF8&psc=1
Archaic Tail Lights Assembly Fit for toyota Camry Se/Xse 2018-2021, Full LED Rear Lights w/Sequential Turn Signal Tail Lights(Transparent,tinted 1 Pair) https://www.amazon.com/dp/B08N4G4P2V/ref=cm_sw_r_apan_glt_fabc_Q35VJJDB786TJ0TTF7S4
Get the wireless carplay adapter for it. CarlinKit 3.0 Wireless CarPlay Adapter USB for Factory Wired CarPlay Cars (Model Year: 2019 to 2020), Wireless CarPlay Dongle Convert Wired to Wireless CarPlay https://www.amazon.com/dp/B08P1GWQDB/ref=cm_sw_r_cp_api_glt_fabc_C0HJGP5MXRFK8DMBGG13?_encoding=UTF8&psc=1. If you have android this won’t work but if you have iphone you can just use the wireless phone charger and keep it there. I’ve had this since march on my 2021 XSE and it’s worked really well. It’s a little expensive but i believe it’s worth it in the long run.
I found this part on Amazon. Toyota OEM looks to be around $100-150. I have not used this but for the money might be worth a shot since it’s less than $20.
Install video
Good luck.
TouchUpDirect 218 Attitude Black Pearl Compatible with Toyota Exact Match Touch Up Paint Brush - Essential Kit https://www.amazon.com/dp/B07FCX4DDN/ref=cm_sw_r_cp_api_glt_fabc_6VNRYZ69DFRNARR1JJ1J you can try this. But make sure match your color code.
Tape-On Dark Tinted Side Window Visor Deflectors Vent Rain Guards Compatible with Toyota Camry 2018 2019 2020 2021 XV70 for All Trims L LE SE XLE XSE Hybrid https://www.amazon.com/dp/B08JQ448L6/ref=cm_sw_r_cp_api_glt_fabc_CGMWYY7J98MNCER51N7T?_encoding=UTF8&psc=1
This is what I used.
Bafx Products - For Android Only - Wireless Bluetooth Obd2 Scanner Diagnostic Code Reader & Scan Tool - Scan, Reset & Clear Car Check Engine Light https://www.amazon.com/dp/B005NLQAHS/ref=cm_sw_r_apan_glt_fabc_RPHVS1N8VJZ610R34VB4
these are the ones i purchased
well, the answer is yes. and the more professional versions would not be a cigarette outlet they would run into an open fuse. the difference in installation would be minimal. if you are going to the extent of pulling panels and hiding wires, wiring into your fuse box wouldn’t be very much difference.
i have a outlet in my dash cubby and one behind my gear shift under a flip panel. so i just ran into the cubby so it would be hidden and out of the way.
i also know for sure they make led strips that are usb, so you could just use an adapter to a lighter outlet that has the lighter + female usb end and it would be very similar, however i haven’t researched these for vehicles. all of my usb rgb’s are on electronics
Dasaita 10.2" Android 10.0 Bluetooth Car Stereo with Carplay for Toyota Camry 2015 2016 2017 GPS Navigation for Car Entertainment Multimedia Radio Touch Screen 1280x720 with 4G Ram 64G ROM https://www.amazon.com/dp/B07ZKHHLW7/ref=cm_sw_r_cp_api_glt_fabc_8FC6VGPH36KX4MWXQR30?_encoding=UTF8&psc=1
It’s the Dasaita 10.2inch unit. It was $569.
Dasaita 10.2" Android 10.0 Bluetooth Car Stereo with Carplay for Toyota Camry 2015 2016 2017 GPS Navigation for Car Entertainment Multimedia Radio Touch Screen 1280x720 with 4G Ram 64G ROM https://www.amazon.com/dp/B07ZKHHLW7/ref=cm_sw_r_cp_api_glt_fabc_8FC6VGPH36KX4MWXQR30?_encoding=UTF8&psc=1
Okay, seems like folks like the top.
Here are the products I used.
CarPro Reset $30 https://www.amazon.com/CarPro-Reset-Intensive-Car-Shampoo/dp/B00K71AY1W
Q2M Cure $35 https://www.amazon.com/gp/aw/d/B00OLN7IXO?psc=1&ref=ppx_pop_mob_b_asin_title
Yep! I did it on my '12 with a kit that I got for $50 (reg. $100).
Something like: https://www.amazon.com/PYvideo-Toyota-Integrated-2012-2014-Factory/dp/B00KLSX3ZK
You take the radio out, add in a wiring harness between the one that's there and the head unit, and run wire all the way to the trunk via the driver's footwell and the kick plates, drill a hole for the camera and wire everything up using the connectors (it's basically plug and play; no splicing required, as I remember). The car recognized mine right away upon shifting into reverse and it works just like stock - I was super happy with how it turned out! Probably would take a chunk of some nice Saturday if you don't rush too much, and it's not a complicated project per se (I could likely do it again in two or three hours but probably spent twice that being careful and double checking things).
I was wondering why I lost one of the dual note horn
I thought I over honked 😆
Wire rotted out right at the crimp for the connector
$15 later on eBay, I got a new pigtail with some fresh wire, nice crimp and seal connector, with some 3M 88 tape over the top, should outlast the car
If you have a Camry and the horns are getting tired, Hella makes a drop in replacement for most Toyota products
$21 or so on Amazon, they sound 90% identical to the factory ones, for a much better price
Left Rear door lock on my '06 stopped working
When it stuck in the unlock position, all the door locks would go crazy when you'd shift out of Park, I've got the driveway door locks on
You can buy the whole actuator/latch assembly from Toyota or Aisin in the aftermarket, to the tune of $150+
I did this with the drivers door, before I knew they could be dismantled and repaired 🤡💵
Or for $22 delivered, you can get 4 replacements of the internal 12v hobby motor that actually actuates the lock/unlock part of the latch
They'll all fail eventually, so buy the 4 pack and keep the rest on the shelf
There's a few pictures and write ups scattered about online, but none specific to Camry
If you can pull a door panel, and undo 3 Torx T30 bolts that hold the entire latch on, I'm confident you can figure it out
If your gonna have 4 doors, best they all function 😆
This is what I use to connect my phone. Works really well and you can keep the stock look https://www.amazon.com/Nulaxy-Wireless-Bluetooth-Transmitter-Smartphones/dp/B018E0I01I/ref=mp_s_a_1_3?dchild=1&keywords=bluetooth+adapter+for+car&qid=1628481585&sprefix=bluetooth+ada&sr=8-3
Also , if you're looking for LED bulbs to go along, these lenses take H7 bulbs and these Aukee ones fit in the housing perfectly with no modification.
These are the switchback you're talking about. I have them installed in my Camry SE. It will probably say not compatible with your Camry if you have your make and model saved in Amazon garage. Trust me they work great.
Edit: I see you're referring to the "X" trims. Others are correct you'd need to change the entire assembly.
I got a dash cover for mine, some people don't like covers but I think it looks good imo. I also changed out the door lights for LED lights, dome light and trunk light.
I have one in my 2012 that sticks into the cd player slot a little bit and hooks itself in there. There's a release button for taking it out.
The first one I have and use to charge my phone. However my car won’t play music from just that it has a separate thing for the aux. there is a cigarette lighter like that and then another hole separately for aux only. (www.amazon.com/dp/B07P5Q8SC1/ref=cm_sw_r_cp_api_glt_fabc_118JCRQRA9DMVXSXS3MK) this is the cord I got for my aux. it does not charge my phone and I’m in search of a loophole that would do both simultaneously
The dashboard in my 2010 is just like this. I got this off Amazon for relatively cheap and the dash is no longer an issue for me:
It used to be dangerous to drive the car but now I can actually see the road when it's sunny out or there are lights on the street.
Yes the car is still under warranty, I also get a lot of data from the dashboard itself, but I saw one reader relatively cheap: https://www.amazon.com/Foseal-Improved-Version-Diagnostic-inCarDoc/dp/B077F8F6TB/ref=pd_rhf_se_p_img_1?_encoding=UTF8&psc=1&refRID=PPQ2EB1VVPMXVP3SCAXD and was wondering about the overall opinions here. But you're right, I may actually not need one at this very moment.
Trunk Spoiler Compatible With 2007-2011 Toyota Camry, JDM Style Matte Black ABS Added On Rear Lip Wing by IKON MOTORSPORTS, 2008 2009 2010 https://www.amazon.com/dp/B079BGJJMS/ref=cm_sw_r_cp_apip_bKaMESp4QHvWP
It's toast, mine did the same thing. The $300 is probably not even to repair your radio but for a new one, I'm not sure you can repair that.
What you want to do is replace the radio, but get the JBL Converter so it still uses your JBL Amp + sound system.
​
https://smile.amazon.com/gp/product/B0007WRQQ2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
​
Similar to that but double check your 05 vs my 04.
I had the same thing happened and freaked out but to the person who was talking about drying out has a point. I use this on the seats and used this on the dash (the conditioner after cleaning the dash). It took it away. You may have to apply a couple of thin coats evenly across the entire dash to clear the marks. Put one on and let it sit for an hour then do another until you get the results your looking for. I would HIGHLY suggest doing this in the shade and the dash is cool. https://www.amazon.com/Lexol-Leather-Conditioner-Cleaner-Accessories/dp/B07LGVXSFK/ref=sr_1_5?crid=10MG83KNIORKI&dchild=1&keywords=car+leather+cleaner+lexol&qid=1619368816&sprefix=car+lexol%2Caps%2C205&sr=8-5
I actually got it as a gift and don't have it in my order history but I do know it was purchased from Amazon. I wouldn't recommend my specific model. Quality isn't that great but it works.
This is a similar model:
https://www.amazon.com/dp/B07TCLHNHL/ref=cm_sw_r_cp_apa_glc_fabc_VXZ1SZG96G6B9EZKKS6Y
I found this for you that might work the non greasy finish is what you should look for because in my experience the shiny dash can reflect back onto the windscreen and it’s annoying. For $14 it might seem a bit pricey but you can go ahead and spray other parts of your car like plastics and vinyls to keep them from going dry. And make sure you do not get it on the windows because it will be a pain to remove
I got one off amazon last week for my 21 SE Camry. It’s just your basic two piece collapsible sun shade. Great reviews too. I got the medium size. It’s on sale right now too.
Limited-time deal: EcoNour Foldable 2-Piece Premium Car Windshield Sunshade | UV Protector Automotive Window Sunshades | Fit for Cars, SUVs, Vans, Trucks | Front Window Car Visor Accessories (Medium 28 x 31 inches) https://www.amazon.com/dp/B079J89SJ3/ref=cm_sw_r_cp_api_glt_fabc_QS378GSEFJC4667G3XR0
Less than $20. 4 PCS Compatible Toyota Door Logo Lights Projector LED 3D Shadow Ghost Light For Toyota Highlander/Camry/ Prius/Sienna/Tundra/Venza/4 Runner Puddle Light Accessories https://www.amazon.com/dp/B07HR4GBC7/ref=cm_sw_r_cp_api_glt_fabc_MW86GRRZJYN9VN16SFQS?_encoding=UTF8&psc=1
https://smile.amazon.com/Husky-Liners-Front-Footwell-Coverage/dp/B002LBO73M
I got these for my old 2018 CX-5 and new 2019 Corolla SE. They fit well and are really easy to clean. The cheap floor mats are okay but the fitted ones are way better. I have Toyota ones for our 2015 Camry SE and I love that they say “Camry” on them but the Husky mats fit better for sure.
Tint and a dash cam may be good add ons for you as well, along with a backup camera. The OEM exhaust tip shouldn’t be expensive either if you’ve got the 4 cylinder without it. We had a 2009 LE til we got the 2015 so I’m familiar with your gen Camry. Enjoy the new car!
UPDATE: I think this is the one made for the 2007-2011 model. I am not too sure though, but I got this one.
TOYOTA Genuine 33554-06050 Shift Lock Release Button Cover https://www.amazon.com/dp/B00KX92H0Y/ref=cm_sw_r_cp_api_glc_fabc_FT2cGbM5TRT4Q
Here is the one I have. It looks decent, and does what I need it to do. I'm sure you also have the cursed sticky dash. This really helps cover it up and reduces the glare. There seem to be a lot of other options on Amazon too
There’s switchbacks LED’s you can buy. When the blinker is on they go from white to amber to white again. something like this.
Dasaita 9" Android 10.0 Car Stere... https://www.amazon.com/dp/B07VW6VWRT?ref=ppx_pop_mob_ap_share
For the display
Dasaita CB005 Power Cable... https://www.amazon.com/dp/B08DTVX3L5?ref=ppx_pop_mob_ap_share
For the JBL adapter
Not that you asked but it looks like the camera I bought is no longer for sale but they have many similar ones on Amazon.
I’d recommend the Sylvania Xtravision bulbs: https://smile.amazon.com/SYLVANIA-XtraVision-Halogen-Headlight-Contains/dp/B0031HEIDY
Slightly brighter, 850 hour life (1000 for the standard bulbs, 250 for the white/blue ones). Had them on my old 2005 Camry low beams and fog lights. Also have them in one of our Corollas.
Helpful tip: use gloves when installing the new bulbs. Oil from your skin reduced bulb life when you touch the bulbs with bare hands.
Got it from amazon here
Pair of Car LED DRL Daytime... https://www.amazon.com/dp/B07KC6JYTC?ref=ppx_pop_mob_ap_share
And the DRL’s themselves aren’t hard to install, but the fog lights yes. I couldn’t figure out how to do it so they’re just for show lmao. And the switch that came with it didn’t even fit.
If you take them to a professional they can probably do it easily. The quotes I got were roughly $90ish
Congratulations on the trd what color? I did research online, amazon, and the mcgard website. They say the size is m12 x 1.5 thread size for 2019 camry. I bought these off amazon for my 2019 xse, but havent installed them. I'll install tonight and let you know if they dont fit. Unfortunately, Mcgard site doesnt show the 2020 cars yet. McGard 25357 Chrome/Black Tuner Style Cone Seat Wheel Locks (M12 x 1.5 Thread Size) - Set of 4 https://www.amazon.com/dp/B0002UOQLC/ref=cm_sw_r_cp_apa_i_zmM5Db9MR3WBR
Oh wait what that's not an overlay? Not this item? https://www.amazon.com/dp/B07VFWCR8M
That's awesome that you popped it off and did it yourself. I'm going to have to look into that, didn't even think of it.
How did you get the screen red? Is there a way to change the backlighting for the knobs to red that I didn't know about???