What are
/r/Challenger's
favorite Products & Services?
From 3.5 billion Reddit comments
The most popular Products mentioned in /r/Challenger:
The most popular Services mentioned in /r/Challenger:
Nextdoor
Facebook Marketplace
Lifehacker
Android
The most popular reviews in /r/Challenger:
It might be better traction on dry road, wider tires also mean worse handling in puddles (hydroplaning) and on snow (pretty much everything that lifts your wheel from an asphalt), worse fuel economy, and are more expensive.
I'd recommend you to have some necessary things in a trunk, like portable tire inflater, spare light bulbs, reflective vest and emergency kit, flashlight, fire extinguisher, blanket, and other things that you can think of that can help you out in case of emergency. There are many lists of must-have equipment for you car. Example: https://lifehacker.com/30-essential-things-you-should-keep-in-your-car-1263514115
as /u/stealthcoyote said, they go on with double sided tape. The thing is, proper prep is essential in order for them to stick over the long term. The louvers come with a small tube of 3M Adhesion Primer. But I found that single little tube was not enough for proper prep. So I bought two 3-packs on amazon So I had 7 tubes total, and ended up using 6 of them.
So if you do decide to buy those louvers, do yourself a favor and buy extra adhesion primer ahead of time. I was already into my install when I realized that there wasn't enough in that tube for a proper prep. And had to put everything away, and wait for the Amazon delivery.
Spectre Performance 8741 Black 3"... https://www.amazon.com/dp/B000BPZ55Y?ref=ppx_pop_mob_ap_share
For the passenger side fits like a glove prevents rain from getting on the engine just flex it down towards the ground, fits perfect.
I bought these on Amazon! Less than 5 mins to do it RT-TCZ Tail Light Lamp Cover Guard Trim Frame Bezels Decoration Accessories for 2015-2021 Dodge Challenger (Smoke Black) https://www.amazon.com/dp/B092SJBJ49/ref=cm_sw_r_cp_api_glt_fabc_MQZ03G6HYJWFQ0EGGP38?_encoding=UTF8&psc=1
Oh Ive been using Kickers for like 15 years, love them. The net was from amazon, comes with the connectors that it loops around. I remember it being a pain to get my hand back behind the metal to get the connectors screwed in, just used holes that were already there from what I remember but it was like a year ago so I dont remember that well. I saw some forums with people saying they got chrysler 300 nets but after some research I just went with this one and it worked out well for me.
Been using McKee's 37 MK37-492 Matte Finish Cleaner & Protectant on my satin sections since I've had mine and at this point I think I'm at the "swear by it" stage. Keeps the satin looking brand new, zero damage so far and not hard to use at all. I've found it locally at Advance Autos and also at Amazon
a throttle controller will make a world of difference in response times. Oil Catch can is a must. I LOVE that B5 blue, best color IMO.
Flowmaster Super 10s I got from Amazon, just had them installed at a local muffler shop. Also, had the resonators cut out.
I went with the Mopar molded splash guards, ordered mine fromAmazon. They significantly reduce the amount of debris my tires kick up on the sides of my car.
There are plenty of options out there though. Mopar, JLT, ZL1, etc.
Gorilla Heavy Duty Double Sided Mounting Tape XL, 1" x 120", Black (Pack of 1) https://www.amazon.com/dp/B082TQ3KB5/ref=cm_sw_r_cp_api_i_tUKBFbNYC87FZ
They sell it at Lowe’s, Home Depot and sometimes even Walmart. So no need to order online.
Have you been using UV protection? https://www.amazon.com/303-30382-Protectant-plastic-finished/dp/B0185PU38A/ref=mp_s_a_1_4?dchild=1&keywords=303+uv+protectant&qid=1598414470&sprefix=303+U&sr=8-4
Generic mult-use Armorall and whatever cheapo crap they use at carwashes does nothing for real protection, gotta use the real stuff.
Source: an outside-parking Southern Cali 2009 challenger with an uncracked interior.
Use the OG stuff from Mopar. Penzoil and a mopar filter. There's a guy on Amazon selling a full kit for the 6.4 with proper amount of oil and correct filter.
Edit: here
Looks like they went up in price, at least on the Canadian amazon, probably much cheaper on the American one.
They make an oil filter wrench Like this that basically straps and tightens around the whole thing.
What's the exact issue? You might need a Canbus Decoder.
I got these for my 22 and they just replace existing bulbs. No issues and nice and bright. Just make sure you aim them correctly. https://www.amazon.com/dp/B0924LG2M5?psc=1&ref=ppx\_yo2ov\_dt\_b\_product\_details
oh yeah, a bottle of Stabil takes care of that
This is what I use, does the job without breaking the bank.
I wasn't a big fan of the TW. I found this Mothers' CMX and LOVE IT
There are trim panels like these, but they are gloss plastic so I'm not sure how much it would help. They also seem only come in carbon fiber or bright colors, I just want matte/satin black.
yes there is power there that is accessible. Depending on your model year and type of rearview, there's an adapter you can buy that makes tapping into it very easy:
https://www.amazon.com/dp/B08B91BT9Q?psc=1&ref=ppx\_yo2ov\_dt\_b\_product\_details
I got the same ones. They sell them without the side window louvers and just the back one for slightly cheaper to
These are the ones I got and are going on two years strong; they may have a cat logo somewhere: https://www.amazon.com/Eastfly-Challenger-Projector-Courtesy-Replacement/dp/B07VNY21LR/ref=sr\_1\_3?crid=18JQEL74MGAP1&keywords=scat+pack+puddle+lights&qid=1660765505&s=automotive&sprefix=scat+pack+puddle+lights%2Cautomotive%2C103&...
VViViD+ Matte Metallic Black Vinyl Wrap (6ft x 5ft) https://www.amazon.com/dp/B0725SLPMJ/ref=cm_sw_r_apanp_YDFW1o6lU9SZR
It looks awesome on it. Get the tool set and have a heat gun handy.
I might try and remove banana.
WIX Filters - 57063 is the exact same SRT filter just without the branding.
Yes, big warning on the dash when I let off the brakes and it's acting up. Blinker out out something like that. OBD jscan tells me the whole error.
I assume no indicator lights on the dash that would cause you to believe a code has been thrown. If you have a Bluetooth obd, you could use OBD jscan to scan all the modules. The licenses are pretty expensive, but it's more thorough than the cheaper apps which only scan a couple of modules.
This is the one I use :
​
https://www.amazon.ca/gp/product/B08213ZQFX/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
I tried this search when I got mine used with some scrapes on it. Every thread I found could not find a Mopar part # and the general consensus was as /u/psychotic_penguin said the https://www.amazon.com/gp/product/B00HE68NXE/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1
Side note, I've seen arguments and people can't decide if it is black or metallic grey, and I noticed it does appear to change based on lighting and angles.
A cheap and easy fix I also found was using a black Sharpie brand marker. I tried this (while waiting for the paint) and to be honest you can't tell unless you are 2 ft away and looking for it.
it's an SXT, you don't need upgraded calipers. just paint the ones you have red and call it good if you are just after the look.
I got mine on Amazon or eBay I think. Some come with the adhesive and some don’t. Just make sure it does.
The one I linked was the flat version, I had the kind that’s more 3D. This one to be exact.
Get a low-profile jack and 2 tons is fine unless you're lifting the entire car up off the ground. I have these jack stands and wheel chocks.
Ceramic coat is for you. Then ONR to keep up on it.
The car wash bay you're going to likely has hard water, dirty equipment and harsh soaps.
Thanks! Here ya go
VLAND Tail lights Assembly Fit for 2008-2014 Dodge Challenger, Plug-and-play,Smoked https://www.amazon.com/dp/B08PQLTY7C/ref=cm_sw_r_apan_i_ED0KY6N8VKQHNPQYT6XT?_encoding=UTF8&psc=1
Yeah I'm only looking to add a single JBL 12, so I was curious if I'd even need to dynomat the trunk, but I definitely don't want the obnoxious metal rattling sound outside the car.
Echoing others. I got a different throttle response brand for $49.99 on Amazon and it works perfect. Just don't change settings while driving, always make sure you are in park. I hear it can throw codes if you do.
Throttle Response Controller,9... https://www.amazon.com/dp/B09BVH1VKG?ref=ppx_pop_mob_ap_share
Nothing too fancy. One I found on Amazon and it’s actually on sale now at only $20. Has worked great for me for a couple years now and still going strong.
Tool Daily Foam Cannon with 1/4 Inch Quick Connector, 1 Liter, 5 Pressure Washer Nozzle Tips https://www.amazon.com/dp/B07HC898GM/ref=cm_sw_r_cp_api_i_CZTRBTCRSV290ABSA91R?_encoding=UTF8&psc=1
This is the tube you’ll want to connect your stock intake to the headlight here
And watch this video to see how to connect and how it works. It’s really cool and simple
Dorman 310-215 try that one if it's not working or just google "Dorman 310-215 Evaporative Emissions System Leak Detection Pump".
Front Bumper Lip Splitter Protector Replacement for 2015-2021 Dodge Challenger Scat Pack, SRT 392 and 2019-2021 RT GT https://www.amazon.com/dp/B08JPLH4Z1/ref=cm_sw_r_cp_api_i_Y4NVNEKYM9FXM4V222KK I mean they sell them separate too
KORJO Car Underglow Lights, 6 Pcs Bluetooth Led Strip Lights with Dream Color Chasing, APP Control 12V 300 LEDs Underbody Lights, Waterproof Underglow Led Light Kit for Cars, Trucks, Boats https://www.amazon.com/dp/B081DNBMMX/ref=cm_sw_r_cp_api_glt_i_PE7X58WTGM8SC6FVNJ0T
These are the ones I got! They’re great and install was pretty easy
OASIS AUTO OS-009 Leather Car Seat Covers, Faux Leatherette Automotive Vehicle Cushion Cover for 5 Passenger Cars & SUV Universal Fit Set for Auto Interior Accessories (Front Pair, Burgundy) https://www.amazon.com/dp/B088BWBYKS/ref=cm_sw_r_cp_api_glt_i_GYVM4WG4Z2SNDZ6B2NT9
It’s a universal fit, the company produces a lot of different styles if you sort by them.
Lots of options everywhere online. Did a quick search on amazon and found quite a few.
JH DESIGN GROUP Men's Dodge Challenger Hoodies in 2 Styles Pullover & Zip Up https://www.amazon.com/dp/B0727VTZQM/ref=cm_sw_r_cp_api_glt_i_RK1TXRVTWF0Q07J33QX5?_encoding=UTF8&psc=1
Will that fit?
MGP Caliper Covers 12162SCL1RD Red Brake Covers 2011-2020 Dodge Charger Challenger (Dual Piston Front Calipers) Engraved with Challenger // (Front/Rear; Set of 4) https://www.amazon.com/dp/B00HQZ71ZO/ref=cm_sw_r_cp_api_glt_i_GK8AXVPGTF417TN7FNQS
https://www.amazon.com/Atturo-Az850-45R20-108Y-Summer/dp/B08Q2WCTN7/ref=sr_1_1?crid=UDWTP8Q2F2MN&keywords=atturo+az850&qid=1646946145&sprefix=atturo+az850+%2Caps%2C119&sr=8-1 $139 per tire, I had two sets of these on my 2016 Scat Pack. Great all season tires.
It’s a colored weather strip. You can find online or your local auto parts store should have it. Like this.
CENTAURUS Car Door Edge Protector, 32Ft (10M) Flexible Universal Car Edge Trim Rubber Line Seal Protector fits Replacement for Most Car (Red) https://www.amazon.com/dp/B07VTKG87Q/ref=cm_sw_r_cp_api_glt_i_4JFXA056MMSY0AEFM9QN
I gotchu, just in case ya don't see the other comment.
Muslogy Mando Style Universal car Engine Start Stop Button Cover Anti-Scratch Push Start Button Protective Cover 3D Mando Sticker for Cool car Interior Gift for him Accessories (Metallic Sliver) https://www.amazon.com/dp/B09FL64ZCR/ref=cm_sw_r_apan_glt_i_ZA5E2RXG7T95MA62XVP7?_encoding=UTF8&psc=1
This is the way.
Muslogy Mando Style Universal car Engine Start Stop Button Cover Anti-Scratch Push Start Button Protective Cover 3D Mando Sticker for Cool car Interior Gift for him Accessories (Metallic Sliver) https://www.amazon.com/dp/B09FL64ZCR/ref=cm_sw_r_apan_glt_i_ZA5E2RXG7T95MA62XVP7?_encoding=UTF8&psc=1
This is the way. Make sure you empty everything out the packaging including the backing and foam lol I've had it for 2 days and just realized lol
Limited-time deal: 2022 Upgraded AUXITO 9012 HIR2 LED Bulbs, 100W 20000 Lumens, 600% Brighter, Super Bright Wireless LED Conversion Kit, Canbus Ready, 6000K White Halogen depends if you want to go stock bulbs or aftermarket… I had a bulb on my 17rt go out and I replaced them with these. They have been great so far but I’ve only had them in this week.
Replacement Bulb, Pack of 2 https://www.amazon.com/dp/B09LCYQ4HM/ref=cm_sw_r_cp_api_glt_i_dl_B4HEMXAX56T816N7DR1Y?_encoding=UTF8&psc=1
Like full on pick up truck mudflaps? I just run the regular ones on mine
First things first is check the air cabin filter. If it's still the factory filter it's way past due on replacement.
Blower motor replacement is very easy, like changing a light bulb easy. If the dealer doesn't take you under warranty then I wouldn't necessarily go to them to fix this. A new motor will be ~$50.
Does anyone know if 2 1/2 inch Vibrant resonators (link below for reference) will fit a 2021 sxt? I’m an idiot who didn’t think to look before buying them 🤦♂️🤦♂️
Vibrant 1792 Bottle Style Resonator https://www.amazon.com/dp/B000E3VHVO/ref=cm_sw_r_cp_api_glt_i_T1BZH6CRZCP13S144EJ5?_encoding=UTF8&psc=1
I use this for my 2021 Challenger. Its for regular bodies and fits my widebody a bit snug but way better than some generic brand I bought from Amazon before returning it. The outer material so far is holding strong from snow and rain. I just wish the inner material was soft cotton to prevent any scratches ( the inner feels a bit soft, but by no means ultra soft)
Tuxcover Custom Fits 2013-2021 Dodge Challenger Car Cover All Weatherproof Multi Tyvek Covers (R/T, SRT, T/A, SXT, Hellcat) https://www.amazon.com/dp/B07KJSTXMP/ref=cm_sw_r_apan_glt_i_2HJKDKNX1E21FNMXJBBG?_encoding=UTF8&psc=1
I saw dudes on YouTube doing the badge mod. Black stands out more. Here's the link
Most shops lower pricing during the winter when it's slower. Get ur wraps done before spring and summer when pricing is higher.
EastFly Never Fade Door Light LED for Dodge Challenger RT SRT SXT GT SE-No16 Projector Ghost Shadow Welcome Lamp Logo Courtesy Step Lights (1. Scat Pack Emblem for Challenger) https://smile.amazon.com/dp/B07VNY21LR/ref=cm_sw_r_apan_glt_i_KTGY0ZRC95AHMQ0SVX7B?_encoding=UTF8&psc=1
These are the ones Amazon says I've purchased in the past. Yeah, I imagine it's just a better way of printing the logo so it doesn't fade over time. Dont have the box anymore.
I bought this one and I love it. Fits great, even covers the tires.
CarsCover Custom Fits 2013-2021 Dodge Challenger Car Cover 5 Layer Ultrashield Black Covers https://www.amazon.com/dp/B071WXSN9S/ref=cm_sw_r_apanp_uTiRRdondALAJ
I also add this to my passenger side headlight took the cap out and this fits right in nice and snug I vent it towards the bottom of the motor so rain water runs off but also allows air to blow towards the motor.
Spectre Performance 8741 Black 3" Air Duct Hose https://www.amazon.com/dp/B000BPZ55Y/ref=cm_sw_r_apan_glt_fabc_1GSBHT0P4D7GH6MWNSF5?_encoding=UTF8&psc=1
The window spoiler is the Spoiler King XL https://www.amazon.com/dp/B01NCA3QW8/ref=cm_sw_r_apan_glt_fabc_2JG3PJCRHF0ZDAMV3SZ3
Yes I have the SRT spoiler a totally worthy investment!
Pennzoil ultra platinum 7 quarts with the Genuine Mopar 5038041AA Oil Filter
Gorgeous ride! I'd look into these to replace the mid mufflers: Dynomax Bullets
(per a suggestion on this subreddit actually)
That's what I plan to do with mine, they will make it louder but not obnoxious because you'll still have your active exhaust and rear mufflers. And from what I've seen it sounds better than outright deleting the mids.
I wouldn't suggest spending the money on Borla mufflers unless you're going to go all the way and do a catback system as it won't sound as good for the money unless you get a whole system.
I didn't want to spend the high $$ on the P.C. and went with one of these - it's been great!! easy to install and absolutely makes a big difference in response. 10 RT w/automatic
So this would be perfect then for the oil and filter combo https://www.amazon.com/Engine-Penzoil-Platinum-Synthetic-Filter/dp/B07V49WGHX/ref=mp_s_a_1_3?adgrpid=57632298618&gclid=CjwKCAiAksyNBhAPEiwAlDBeLOgp20XlyEBbLtRTAAIPK5vJJWgyT3-3vqGOS6m6FnLZKOgqRwC7XBoC24IQAvD_BwE&hvadid=274688401677&hvde...
if she just wants a backup cam, I'd highly consider something like this as a cheaper and less hassle option.
I was thinking of maybe getting this filter? What do u think and do u think it is better or the same a as the stock oil filter? https://www.amazon.com/Genuine-Mopar-5038041AA-FILTER/dp/B006T08WXM/ref=mp_s_a_1_3?crid=2202HKGF935X6&keywords=challenger+oil+filter&qid=1639175062&sprefix=challenger+oil+%2Caps%2C117&sr=8-3
for protectant I used Cerakote and it's held up very well for over a year so far. mine was pretty faded from the TX sun and doing a CC job on it brought it back to brand new.
to add to the thought that a tune doesn't make a difference stock: I work at a dealership and have driven several stock 5.7 Challengers and the tune absolutely makes a difference, even with minor bolt on mods. another thing I would get is a throttle controller, it takes out the pedal lag and makes a HUGE difference, I got one of these cheap ones and it works great, one of the better 'bang for the buck' mods and it takes 10 min to install with no tools needed
Diluted to make a spray detailer. I bought this July 2019 and it is just now at a little less than half left. For $30-35 you can make literally over a hundred bottles of 16oz detailer spray using a 16:1 ration.
There are many options and they are easy to replace just don't use anything metal to pry it out you could damage the rim.
Yea definitely. I did have a issue with the chord when I first got them, but they sent me a free replacement for it pretty quickly. fiber optic lights
When you’re the king, everyone wants a piece.
I suggest keeping a set of these in your car for the losers: https://smile.amazon.com/dp/B01NCMVPRM/ref=cm_sw_r_cp_api_glt_fabc_PQ9RP8JHYYV5DEG3HKVH?_encoding=UTF8&psc=1
I got it off of Amazon. I actually wanted it to attach directly to the fob, but obviously by the picture it didn't work out.
MecArmy CH2 Titanium D Shape Key Ring, Utility Keyring with Screw Shackle, Keychain Car Key Tool Key ring for Everyday Carry https://www.amazon.com/dp/B08B3WVDN3/ref=cm_sw_r_apan_glt_fabc_ZXKTBHEAG73MRGCD0X7Q?_encoding=UTF8&psc=1
I use a low profile seat gap organizer like this. I connect my phone to my USB cable then just toss my phone in the organizer.
Try this, only thing it’s in the way of a couple buttons with iPhone 11. Reasonable price . Car Phone Mount 2015+ Dodge Challenger Magnetic Phone Mount (Automatic ONLY) Black https://www.amazon.com/dp/B07S2VBYD6/ref=cm_sw_r_cp_api_glt_fabc_6M13C7YW6ZFFS5ZQ8XGT
I hate the UConnect freezing. My biggest gripe.
I bought this net for my car years ago and it works great to keep stuff from rolling around. Can only connect the top two loops, though.
Heavy Duty Cargo Net Stretchable, Universal Adjustable Elastic Truck Net with Hooks, Storage Mesh Organizer Bungee for Car, SUV, Truck https://smile.amazon.com/dp/B075B6RVYW/ref=cm_sw_r_cp_api_glt_fabc_ZZ7DMY61PT1B00MZ9ZSP?_encoding=UTF8&psc=1
I have an easy fix and it enhances the look of your car too, especially since you have some red already. pickup some 3M Pinstripe tape and use it around the edge/lip like this ... now you have the old school redline tire look and covered up 90%+ of that scrape
my first initial thought is get some American Muscle Barrage wheels, and throw some gold accents into them. Also, why not use a Camaro for a trans am tribute?
Looking to open my headlight cap to my JLT cold air intake. Was going to run a standard 3 inch tube from the healight intake to the box and seal it up. Anyone else ever done this instead of buying the 60 dollar tube. https://www.amazon.com/Spectre-Performance-8741-Black-Duct/dp/B000BPZ55Y/ref=pd\_sbs\_7/142-1425256-8379236?pd\_rd\_w=4IYpb&pf\_rd\_p=0f56f70f-21e6-4d11-bb4a-bcdb928a3c5a&pf\_rd\_r=W2SC7N3Y59N5GZ11JPP5&pd\_rd\_r=6dfac770-b341-401e-ba84...
Hey challenger fam, I wanted a new spoiler as I did not like the stock sxt spoiler, this one was very reasonable and has a camera hole so I wanted to share the link as I was looking for a while . IKON MOTORSPORTS, Trunk Spoiler With Camera Cover Compatible With 2015-2021 Dodge Challenger, Matte Black Rear Trunk Tail Boot Deck Lid Lip Wing ABS Plastic, 2016 2017 2018 2019 https://www.amazon.com/dp/B08P42VJ39/ref=cm_sw_r_cp_api_glt_fabc_JCTXHPAJPGETWBSWYPAE?_encoding=UTF8&psc=1
Try using this: SR Performance Skip Shift Eliminator for Dodge Challenger 2008-2020 https://www.amazon.com/dp/B08D9P371P/ref=cm_sw_r_cp_api_glt_fabc_W9PT9GNMTT8C7RXY0T2X?_encoding=UTF8&psc=1
The lame “feature” for better gas milage by skipping from 1st to 4th might be a big part of the equation of weird 2nd manual gear behavior.
It literally just bolts on. It's virtually impossible to screw up. All the pieces coming off look almost identical to the Borla pieces going on.
Watch some YouTube videos, buy yourself some ramps, I think you only need a 13mm socket (IIRC - might be a 15mm), and save yourself some money.
68051392AA is the part number. After installing, put some UV resistant rubber treatment on it every so often.
Rivets and a plastic rivet gun that says it's for POM rivets will work.
I had a YCam on my GTI but I don’t think they sell those anymore. This is the one I have now and it’s perfect. Kingslim D4 4K Dual Dash Cam with Built-in WiFi GPS, Front 4K/2.5K Rear 1080P Dual Dash Camera for Cars , 3" IPS Touchscreen 170° FOV Dashboard Camera with Sony Starvis Sensor, Support 256GB Max https://www.amazon.com/dp/B08DNLHGWR/ref=cm_sw_r_cp_api_glt_fabc_HG1YEC9EYE38XVEYVRZV?_encoding=UTF8&psc=1
Link here: Covercraft UVS100 Custom Sunscreen | UV11397SV | Compatible with Select Dodge Challenger Models, Silver https://smile.amazon.com/dp/B01CIVB3NQ/ref=cm_sw_r_cp_api_glt_fabc_B1VNRHBHQF7V4T7ZPXR4?psc=1
Genuine Mopar 5038041AA Oil Filter https://www.amazon.com/dp/B006T08WXM/ref=cm_sw_r_cp_api_glt_fabc_8H3ZT6VF7D7EQDZA9P37?_encoding=UTF8&psc=1
Pennzoil Ultra Platinum Full Synthetic 0W-40 Motor Oil (1 Quart, Case of 6) (550040856-6PK) https://www.amazon.com/dp/B00JMCCE6U/ref=cm_sw_r_cp_api_glt_fabc_REMN0CHFJXAKM9A3AN8C?_encoding=UTF8&psc=1
I think I am going to go with rear muffler deletes and throw these on. https://www.amazon.com/gp/product/B007ISYE40/ref=as_li_tl?ie=UTF8&tag=exhaustaddict-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B007ISYE40&linkId=182579a4af62b7c1597c6d7f6576b880
I did keep the resonators. Listening to some clips from YouTube I really liked the sound with only doing the muffler swap.
Get a random orbital buffer like this for buffing the paint. Chemical Guys BUF_503X TORQX Random Polisher Kit with Pads, Polishes & Compounds (9 Items) https://www.amazon.com/dp/B01BKT63XM/ref=cm_sw_r_cp_api_glt_fabc_EWJJTT970WAP2YH4P66F?_encoding=UTF8&psc=1
Black Hash Marks I got the yellow ones and they have stayed on for a couple years now. I'd grab em if you're not replacing the center cap with something else.
Dynomax 39490 Dual - 3" Cat-Back System - Ultra Flo™ Welded Mufflers
If you can't find a pair of resonators that would reduce drone and are looking at a full exhaust to achieve less drone, this setup looks like it would work.
Smoked Lens Challenger LED Side Marker Lamp Light Kits for Dodge Challenger 2015 2016 2017 2018 2019 2020 Amber Front Red Rear Turn Signal Driver and Passenger Sidemarker Lamps Replacement https://www.amazon.com/dp/B086V7FRK4/ref=cm_sw_r_cp_api_glt_fabc_HKH4PYP6ZV8VFPTCNKJQ
I wish I had the older MA plates do I didnt need one in front, but it is a Sto N Show :)
https://www.amazon.com/gp/product/B07BFK3CR6
​
Edit: Literally took 10 minutes! Worst is if your bumper was drilled into and need plugs to cover the holes.
If it’s not a thing it should be!
I like the purple. I saw a purple push to start button on Amazon would look awesome with your setup
Thanks! These are the ones i bought. Theyre precut and because theyre flat black, theyre not obnoxious which i was honestly worried about them being https://www.amazon.com/dp/B07N7NNJVB/ref=cm_sw_r_cp_api_glt_fabc_WAEKNEPAADYRAM04CKVK?_encoding=UTF8&psc=1
I bought this one, but I don’t recommend the extra 2 pieces that are part of it. Go with the kit with 2 less pieces.
looks great! another idea is your door panels - where the plastic meets the perforated vinyl you can insert this stuff. I did mine in red, really adds to the interior. I also did this in red around my tire rim to simulate a redline. need to get some pics up =\
Aero Cosmetics Waterless $28 or Optimum No Rinse $43 will set you straight. I've used both and can't say anything bad between them. The Optimum can be diluted to suit many needs/uses while the Aero should not be diluted for it's use. Both are very simple and effective to use and will last you awhile.