What are /r/SkyLine's favorite Products & Services?

From 3.5 billion Reddit comments

Depends on what your intended use case is. If this car is a track car more often than not, dry sump the RB and it'll fix your problems. But the car is not going to be streetable if you

If this is a street car that might see some track use you probably want the following things to improve oiling:

1. Oil sump extension with baffling

2. Spline drive oil gear conversion on crank + oil pump. This is a highly involved task, if you're going to do this you may as well pull the engine.

3. Head oil feed restrictor, sizing depends upon the oil pump you're using among other factors, do your research here and don't just blindly put something in here.

4. Camshaft splash covers near the back of the engine where the breathers are located on the valve covers.

5. Air oil/separator. Preferably on both paths to the intake (there are two, one is for when the engine pulls vacuum vs one when the engine is on boost). If you can't plumb both, favor the pre-turbo intake. Some oil mist will get sucked into the engine when it's off boost but it's nothing compared to what the engine will do at extended high RPM + boost.

6. This is the big one: additional sump breathers. You want to put a big breather on the pressure side of the sump well above oil level. Traditional wisdom has been to plumb this breather to the back of the head, often called a "rear head drain". Based on my research I have my doubts about this approach, it seems that much of the value of this breather is in relieving crankcase pressure under boost and trying to shove all that air pressure into the head is more restrictive than just directly running it to your air-oil separator. You probably need a check valve like this to make sure that you allow the engine to build vacuum off boost, your new crankcase breather will be a crankcase vacuum leak otherwise: https://www.amazon.com/Moroso-97800-Replacement-Crankcase-Check/dp/B000CON4WK

>Thinking about it as a bulk transaction is your first mistake. There is no economy of scale on the transaction. It's not like you're going to get a bulk discount on shipping or a buy 3 get 1 free deal at a dealership.

Sort of. Depending on the shipping company you use they may offer a discount. It will not be 3 get 1 free but If the shipping cost is normally 3800 you might be able to get them for 3600.

We ship to and from Australia so no clue on what they cost from Japan. Our shipping cost is typically around 3300 to 3800 depending on where they are, how far they are from port. Unless it's really expensive that should cover the cost of everything including all the paperwork.

That cost obviously does not include the cost of the skyline.

Just to give a quick example, you should be able to find a better one than this for a bit cheaper but again just an example.

91 R32 https://www.facebook.com/marketplace/item/158593402232923

8,500 AUD is 6,004.40 USD. So landed cost should be less than 10k. Probably closer to 9,500 USD.

1993 R33 https://www.facebook.com/marketplace/item/182289802875213/

11,500 AUD = 8,123.60 USD Should be 12,000 USD or less landed likely closer to 11,600 USD.

Off the top of my head it's the smaller hoses under the plenum that are different, because Nissan changed the iacv between models.

They're the same price from the same supplier.

R32

R33

Tbh if you are worried about saving a few pennies the gtr is the wrong car for you.

So I finally got an Amazon store up and running and the Skyline GT-R Generations print listed for sale here. If you're interested in purchasing and helping me get my store rolling, I'm offering a 40% off for early purchasers who are able to leave a review after receiving their print in good order. Let me know if you're interested and I can send you the promo code!

1

18x9.5 -$3500 18x10.5 -$3600

2

NISMO Wheels 17x 9 +22. $3k

here's another for cheaper

https://offerup.com/item/detail/605437074/?fbclid=IwAR2JRu4NSEBucE2O46lX4fuONHdy6Y14n9iNWckiwDccX5Fxt5F6g8aVQUQ

Can't find the other 3500 now on my computer but it was there, i swear 😂

So I finally got an Amazon store up and running and the Skyline GT-R Generations print listed for sale here. If you're interested in purchasing and helping me get my store rolling, I'm offering a 40% off for early purchasers who are able to leave a review after receiving their print in good order. Let me know if you're interested and I can send you the promo code!

So I finally got an Amazon store up and running and the Skyline GT-R Generations print listed for sale here. If you're interested in purchasing and helping me get my store rolling, I'm offering a 40% off for early purchasers who are able to leave a review after receiving their print in good order. Let me know if you're interested and I can send you the promo code!

So I finally got an Amazon store up and running and the Skyline GT-R Generations print listed for sale here. If you're interested in purchasing and helping me get my store rolling, I'm offering a 40% off for early purchasers who are able to leave a review after receiving their print in good order. Let me know if you're interested and I can send you the promo code!

So I finally got an Amazon store up and running and the Skyline GT-R Generations print listed for sale here. If you're interested in purchasing and helping me get my store rolling, I'm offering a 40% off for early purchasers who are able to leave a review after receiving their print in good order. Let me know if you're interested and I can send you the promo code!

So I finally got an Amazon store up and running and the Skyline GT-R Generations print listed for sale here. If you're interested in purchasing and helping me get my store rolling, I'm offering a 40% off for early purchasers who are able to leave a review after receiving their print in good order. Let me know if you're interested and I can send you the promo code!

So I finally got an Amazon store up and running and the Skyline GT-R Generations print listed for sale here. If you're interested in purchasing and helping me get my store rolling, I'm offering a 40% off for early purchasers who are able to leave a review after receiving their print in good order. Let me know if you're interested and I can send you the promo code!

So I finally got an Amazon store up and running and the Skyline GT-R Generations print listed for sale here. If you're interested in purchasing and helping me get my store rolling, I'm offering a 40% off for early purchasers who are able to leave a review after receiving their print in good order. Let me know if you're interested and I can send you the promo code!

So I finally got an Amazon store up and running and the Skyline GT-R Generations print listed for sale here. If you're interested in purchasing and helping me get my store rolling, I'm offering a 40% off for early purchasers who are able to leave a review after receiving their print in good order. Let me know if you're interested and I can send you the promo code!

Bend it back. In the future you need to use the rubber pinch weld adapters like this which is indicated in that photo you linked from the service manual: https://www.amazon.com/DUTISON-Stands-Rubber-Compatible-T43002/dp/B07FFQGB4F/ref=sr_1_4?dchild=1&keywords=jack+stand+rubber&qid=1598228068&sr=8-4

Also, practice lowering the car VERY SLOWLY with the jack before you ever put stands under the car. Dropping a car suddenly can bend it even with the proper adapters.

Also, make sure you put the stand between the notched points indicated in the photo. You cannot and should not just pick any point along the seam. The notched points are where there are additional reinforcements welded into the frame.

Depending on how bad you mangled it you may need to take it to a unibody frame specialist for repair. The pinch weld is many panels welded together with seals and drainage areas to keep it from rusting out. If it's badly damaged it will rust out and compromise the structural integrity of your car: http://blog.garage-yoshida.net/archives/1926

The Garage Yoshida blogpost is about the BNR32 but the same general principles apply. The R33/R34 chassis is stronger there but you can still damage it and cause a crazy amount of rust.