What are
/r/Talaria's
favorite Products & Services?
From 3.5 billion Reddit comments
The most popular Products mentioned in /r/Talaria:
The most popular reviews in /r/Talaria:
I used an air wedge. I've tried a few different spots but typically stick in the front of the battery. Once you slide it down in there a few pumps of the bulb and then stash the bulb somewhere under the cover and you're good to go.
https://www.amazon.com/dp/B08N67M6YV?psc=1&ref=ppx\_yo2ov\_dt\_b\_product\_details
I bought this one and it works great. You'll need a 2" hitch for it. I used it about 20 times and have had no issues super solid and no swaying.
It's not necessary, but it will stop the battery from rattling so much. Here is the one I have https://www.amazon.com/Winbag-15730-Wedge-Alignment-Inflatable/dp/B00NESAU0U. Just slot it next to the battery on the right or left side, pump it a few times, take the ball off and tuck the tube in by the breaker.
Hey everyone, thought I would share a rear fender option for our bikes. Below is a link...
This fender does require some modifications to fit properly. You'll need a couple drill bits and a way to make a small bend in a metal bracket. You can take a look at the last picture in this sequence for further info on how to modify it to fit a Talaria. Anything dictated in RED is a modification to be made. Good luck!
The one I bought is intended for a Sur Ron and I'm hoping to make it fit. Electric is Better youtube channel said he used a particular one from Amazon so I tried to buy that one but it's no longer available. That same company came up with their "Gen 2" design so I bought that and am hoping it'll fit & not look like crap. Should get it tomorrow. Below is a link to the one I'm going to try and make fit.
Yeah, definitely ugly... My bike should arrive in the next couple hours and my plan is to use some 3/4" black heat shrink tubing over the kick stand where it rubs on the swingarm. Below is a link to an example. Could also use an old innertube or something like that.