What are
/r/accord's
favorite Products & Services?
From 3.5 billion Reddit comments
The most popular Products mentioned in /r/accord:
The most popular Services mentioned in /r/accord:
The most popular reviews in /r/accord:
Link to the taillights, for anyone interested. I was able to install them in about an hour, though I did have to cut and splice the wiring for the backup lights. This was despite the products description specifically saying these are compatible with the 2018 Accord Touring.
Grab a frequency generator app from the google play store or app store. If you're on android I recommend Frequency Sound Generator. Patch your phone's audio through your car's audio system and turn it up as loud as you can tolerate. Slowly step your way up through the lowest frequencies starting at 20hz. Hopefully you'll be able to induce a resonant vibration in whatever is doing this. You can search for the source a whole lot easier once (or if) you manage to do this.
Your specific vibration sounds well below 100 hz, although if you don't find anything keep going as you may also have a luck with a higher multiple of your source vibration.
You'll also find sympathetic frequencies for tons of other stuff in your car, too. : )
Good luck!
Are those the same MK4 taillights I put on my 2018 Accord Touring? I went with the smoked option, they look dope af!
Also, I like the look of the retro California plates on your ride.
I use P&S Brake Buster Wheel Cleaner shit works wonders. I use it in a hand foam cannon and dilute it with water. The first time you use it, it will look like a new car.
Thanks so much! The diffuser I bought on a whim, it’s a universal cheapo Amazon one. Can’t recommend it too much, the adhesive tape couldn’t stick a tick on a dog, so I had to drill holes and install it that way. Material is nice and thick and not deformed though so that was nice. https://www.amazon.com/dp/B07GKH6KNL I plan on replacing it with an sfactor or something similar here soon.
Those emblems are definitely on my want list. I wrapped my stock ones on 3M satin flip psychedelic, so they’re neat. But I’ll probably go JDM red emblems after I wrap the whole car (hopefully next summer or earlier).
Cable can be new but if it's a cheaper cable then it can still give issues. Not all cables are built to spec. You can try a new cable like this one. I use an Anker cable (won't buy any of their products anymore for other reasons) in my Sport 2.0T and haven't had any issues.
It's also a good idea to get a load tester and periodically test your battery. When the cranking amps get to 2/3 or less the rated amps replace it. I use on of these old school analog testers.
First of all get the service manual. Look on Ebay for an official Honda manual in PDF form.
The screws can be a little tricky. Use some PB blaster and an impact screwdriver, the type you hit with a hammer.
I wouldn't worry too much about bolts being stuck. Use PB Blaster. I've worked on 25+ year old Hondas removing bolts that had never been removed, you shouldn't have a problem on a car this new. Get a 2 foot ratcheting breaker bar, I have one of these and I wish somebody had told me about them a long time ago, they are great to have.
So long as you have some common sense and take your time you should have no problem.
Lots of people on here with bad Honda batteries that are 1-3 years old, the quality is not as good as it used to be but still have 100% repalcement for 3 years and prorated after that.
These cars are still using 150 year old battery technology and the battery monitoring systems in Hondas are not that great. Cars used to have volt meters - I keep one in my 12v outlet and have for the last 20 years. Get a jump starter too, they make decent ones with lithium ion batteries that are small and double as a USB power backup source. Get a load tester and test it periodically to see the cranking amps - when it gets down to 1/2 or 2/3 it's time to replace. Cold weather is hard on batteries. Lots of people don't realize theirs is weak until a really cold day hits.
I use one of these old school analog types and test periodically especially when the weather gets cold.
I would just get this Solution Finish Black Plastic & Vinyl Plastic Trim Restorer it works fantastic and you don’t need to worry about wrapping or replacing them.
Just clean with some rubbing alcohol before hand and apply with a wax pad applicator, or sponge
Just purchased one of these and am satisfied with it this far. PME Car Truck Organizer with... https://www.amazon.com/dp/B08DCMYGMD?ref=ppx_pop_mob_ap_share It currently contains the toys my son takes to the playground. I pushed it to the back of the trunk, leaving much usable space for larger items
You try the new Lasfit led bulbs they have a metal piece blocking some of the light to get a better beam cutoff, but they might still be too blinding to oncoming traffic.
Honestly, I kept asking for the one that multiple people have had in this subreddit and it’s surprisingly inexpensive. It’s not the most high-quality, but it’s a great way to start and make sure you like the shape before committing to something way nicer. MotorFansClub 3pcs Front Lip... https://www.amazon.com/dp/B07TVHZD6C?ref=ppx_pop_mob_ap_share
Unfortunately you have to use to a pressure washer for that foam canon. However, my homeboy has this one from Chemical Guys . He said its pretty good for what it is considering its just using your garden hose.
i use this but it can be janky
https://www.amazon.com/gp/product/B09362RPTS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
it works but there is some interference and lag. but when you just want to open maps or something then it works, but it takes some resets. i'd give it a 5/10 because it works but it works sometimes and sometimes not very well.
AUXITO 9005 H11 LED Headlight... https://www.amazon.com/dp/B088ZT28XY?ref=ppx_pop_mob_ap_share
Switched over to these about a year ago. High and Low beam bulbs included in this kit. No issues yet and very simple plug and play installation.
Not much at all. I think that I found them on Amazon a while back. Vinyl wrap. I didn't do a perfect job if you were to look closely, but they've still looked great and I haven't noticed much difference at night. PreCut Vinyl Smoke Tint for... https://www.amazon.com/dp/B095GJ151F?ref=ppx_pop_mob_ap_share
Rexka 25pcs Trunk Side Trim Clip for Subaru 909140072 WRX STI Honda Accrod Civic Acura ILX 90667-TC0-U01-ZA https://www.amazon.com/dp/B07B62PMK5/ref=cm_sw_r_cp_api_i_8PE6YTFZXCDXK43G4MF3?_encoding=UTF8&psc=1 I think these fit a ‘15 Accord
I can’t remember exactly but I believe it was this one. https://www.amazon.ca/Android-Stereo-Player-Screen-Bluetooth/dp/B088B5W43Q/ref=mp_s_a_1_2_sspa?crid=2S1Y7RXOGKU1W&keywords=2009+honda+accord+android+head+unit&qid=1652384840&replacementKeywords=android+head+unit&sprefix=2009+hinda+... It can be a little slow on google maps but nothing to crazy just can’t spam buttons or the app will crash
Gotcha thx for ur help. Didn't realize it was separated into 2 parts. The wiper and the inserts.
Thought it was one thing.
is this part https://www.amazon.com/gp/product/B088RJP1GP/ref=ox_sc_act_title_1?smid=A1XKBZMZZ6AHQG&psc=1 the wiper or the insert?
I got these, after checking a few out. The size you need is T10/168 and two 29mm festoon type for the vanity mirrors. I actually paid $24 just less than two months ago for two sets. A full replacement, and a few extra for the glove box in case any fail. https://www.amazon.com/gp/product/B07ZZZJ78R/ref=ppx\_yo\_dt\_b\_asin\_title\_o06\_s00?ie=UTF8&psc=1
Link to item!
Carbon Fiber Vinyl Sticker Car Door Sill Protector Scuff Plate For Accord Car Accessories (red) https://www.amazon.com/dp/B087GB8R9X/ref=cm_sw_r_apan_i_MZEYACHPNZ9TEF2KK4PB?_encoding=UTF8&psc=1
Thank me later! Invest in SHIB!
I was looking at something like this (randomly chosen) https://www.amazon.com/Rain-X-5079281-2-Latitude-Water-Repellency/dp/B016NA9Y4S/ref=sr_1_1?keywords=26%2Binch%2Bwiper%2Bblade&qid=1648876542&sr=8-1&th=1
just didnt know what size to get for my car. (never changed wipers before)
Is what i linked considered the whole blade or just the wiper inserts?
Cuztom Tuning JDM 3D Aero Wavy Style Window Visor Rain Guard Deflector Compatible with 2018-2021 Honda Accord LX EX Sport https://www.amazon.com/dp/B07FKYRK7B/ref=cm_sw_r_cp_api_i_VHG3NTWXDZFK61J3SXY6
Amazon. I had narrowed my choices down to the Thinkware U1000 and the VIOFO A129 Pro Duo for my old '17. I went with the A129, it was $250 last summer. Quite happy with the camera, had it hard wire installed. When I traded up, I just bought a new hard wiring kit and the two mounting brackets and moved the camera from the old car. https://www.amazon.com/gp/product/B07RXQJ148/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&psc=1
Bruh if you kept it this long and are gonna keep it till the wheels fall off then I'd throw a bottle of ceramic coating on that shi to keep it 100 at all times.
The closest I was able to find was this one (Bezo 5.0 Bluetooth Audio Receiver Adapter，NFC Wireless Bluetooth Extender,3.5mm AUX or RCA Input Speaker,Amplifier, Car Audio,Headphone,Home Stereo Theater System,Stereo Audio Component Receivers https://smile.amazon.com/dp/B08S725911/ref=cm_sw_r_cp_api_glt_i_A7K6ADC2KXY3DC0NP7AY?_encoding=UTF8&psc=1) it’s not that expensive and reviews seem positive. Do more research if you are interested.
I bought this one back in 2019. They don’t make it anymore. (Bluetooth Receiver for Car, Bluetooth 4.2 APTX Low Latency Wireless Audio Adapter for Car Stereo Audio Music Streaming, Multi-Point, 3.5mm Aux Cable https://smile.amazon.com/dp/B075GJC7CM/ref=cm_sw_r_cp_api_glt_i_9GVQ1M3T7HK5GZ2VA8XX?_encoding=UTF8&psc=1) there are fewer options now then back then. You can pick one from recommended off of it if you choose. Just make sure it’s a receiver not a transmitter.
I bought two sets of https://www.amazon.com/gp/product/B07ZZZJ78R/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
They will be here tomorrow. I will have two extra bulbs of each type after changing all interior bulbs. For less than $25, we'll see how it goes.
It's a suede cover from Amazon for 25 $ Here's the link
GOHI YANDA Car Suede Steering Wheel Cover - Black Soft Racing Sport Auto Universal 15 inch Interior Accessories Protector Nonslip for Women Men https://www.amazon.com/dp/B09FGR236Z/ref=cm_sw_r_apan_glt_i_0EPH94CE4XC0EWBDVAM6?_encoding=UTF8&psc=1
Front Bumper Lip Grille Cover Moulding Trim + 2Pcs Eyelid Cover Compatible with Honda Accord 10th Gen 2018-2019 https://www.amazon.com/dp/B07VKS5R24/ref=cm_sw_r_cp_apip_6r7eNeGR9xc7W
Here’s what I used. I added some extra 3M before installing, but overall, I’ve been pleasantly surprised at the quality thus far.
Do you know the exact size of the factory vanity light festoon bulb for a '22 Accord? The manual only shows wattage, and I've seen festoon bulb in kits from 29mm to 41mm. I'm planning on changing the interior bulbs in a '22 Hybrid Accord EX-L. I definitely want the four T10 bulbs for the map lights (2), dome and trunk. This kit also has 29mm vanity mirror bulbs. https://www.amazon.com/D15-Lighting-Interior-2018-2020-Accord/dp/B07ZZZJ78R Is 29mm the correct festoon size for the vanity? And how about the door panel lighting? Are they also just standard T10, one on each side? I'm just trying to confirm exact sizes before ordering, been searching Youtube and the like. Just looking for a full interior upgrade to 6000k.
Not the OP, but I've used these LEDs from these guys in multiple cars: https://smile.amazon.com/gp/product/B074KMGDHX
Personal preference - stick with Cool White or Pure White. I tried the 'blue' LEDs and it looked pretty tacky. The whiter light options are much better than the yellowish, old incandescent factory bulbs.
Here’s my initial purchase that I immediately returned. I couldn’t quite get it to fit on and stay on. Great-luck Leather Center Console... https://www.amazon.com/dp/B08Q853DYN?ref=ppx_pop_mob_ap_share
I returned one that didn’t quite fit, and settled on this one. Just enough to keep the dogs nails off the cover, basic protection. INTGET Car Center Console Cover... https://www.amazon.com/dp/B0972J7ZKM?ref=ppx_pop_mob_ap_share
So yeah you're going to need the can bus to fix the fast flashing for the turn signal. I didn't need one for the headlights.
These are the lights I bought and no issues. Nice and bright. HIKARI LED Headlight Bulbs Conversion Kit -HB4(9006),CREE XHP50 9600lm 6K Cool White,2 Yr Warranty https://www.amazon.com/dp/B01LCE1A1K/ref=cm_sw_r_apan_glt_i_YWV8G3QGBAR5BM2KH87W?_encoding=UTF8&psc=1
I do plan on upgrading my headlamps authentication projectors as well.
From my limited reading on it, it seems that KTuner is preferred over Hondata, but it's probably a similar tune.
Syneticusa 7443 Error Free Dual Color Type 2 Switchback DRL LED Turn Signal Light Bulbs No Hyper Flash Built-in Resistors All in One https://www.amazon.com/dp/B07JFPRFW2/ref=cm_sw_r_cp_api_glt_i_6K499ZABY34VFRV90486?_encoding=UTF8&psc=1 I can’t vouch foe them other then they connected right in. No errors and I didn’t have to get anything else. Literally plug n play
I replaced mine with these LED bulbs they work great. Plug n play.
BEAMTECH 9005 LED Headlight Bulb,... https://www.amazon.com/dp/B06XHD4HV3?ref=ppx_pop_mob_ap_share
BEAMTECH H11 LED Headlight Bulb,... https://www.amazon.com/dp/B06XHDYTGL?ref=ppx_pop_mob_ap_share
Not sure about sprite since that’s gunna be sticky…but this putty works wonders on dust/debris
Full disclaimer, cannot speak from experience as I don’t have a mount in my Accord.
But theESR HaloLock looks really promising. Offers Qi wireless charging, and it has a leg to support the bottom of the mount so it’s not sagging the vent.
Ok sounds good, sounds like it could be that. If you need a good code scanner BlueDriver is having a sale on its tool it’s 69$ when it’s normally 120.
Deal of the day: BlueDriver Bluetooth Pro OBDII Scan Tool for iPhone & Android https://www.amazon.com/dp/B00652G4TS/ref=cm_sw_r_cp_api_glt_fabc_dl_65YDFS2CFM2917J5SCEQ?_encoding=UTF8&psc=1
Rims: SlickMod Chrome Delete Blackout Vinyl Overlay for 2018 2021 Honda Accord Sedan 19 Sport Wheel Rims 1. Gloss Black https://www.amazon.com/dp/B095XMTXCD/ref=cm_sw_r_cp_api_glt_fabc_VZ69P0N6HPZ01W3XHN75?_encoding=UTF8&psc=1
Side trim: Chrome Delete Blackout Vinyl Overlay for 2018-2021 Honda Accord Sedan Window Trim (Gloss Black) https://www.amazon.com/dp/B0938DDWDG/ref=cm_sw_r_cp_api_glt_fabc_730BX4JJF7T6X48D2C8Q?_encoding=UTF8&psc=1
$17 USD. I broke mine too lol. Lubricate the metal coolant pipe thingies before shoving them in the two inlet holes. Helps a lot.
It just slides right into the spot where the current bulb sits. Check Amazon & eBay for products like this:
iJDMTOY Compatible With 2013-2015 Honda Accord Sedan, Set of Xenon White LED Even Illuminating Daytime Running Light Retrofit Kit, Fit Inside Headlight Parking Lamp Housing https://www.amazon.com/dp/B00OPEFKBQ/ref=cm_sw_r_apan_glt_fabc_R8K6FBBTNCFATYKCGHQ3
LED headlights, LED strip DRL and LED interior lights are all nice upgraded to make it look a lot more modern.
Would these work Muteki 32906B SR Series Black 12mm x 1.5mm SR48 Open End Lug Nut Set, (Set of 20) https://www.amazon.com/dp/B004QHOOE6/ref=cm_sw_r_cp_api_glt_fabc_CHRABNXRR65VVDRK6NJM?_encoding=UTF8&psc=1
(Updated) 2018 2019 2020 2021 Accord Sport EX EX-L Touring EX-L Navi Navigation Screen Protector,HD Clear TEMPERED GLASS Screen Scratch-Resistant Ultra HD Extreme Clarity (2018-2021 8In Clear) https://www.amazon.com/dp/B07D6LYHF9/ref=cm_sw_r_cp_api_glt_fabc_V0Z16YF59F8X4G0SE3S9?_encoding=UTF8&psc=1
Android Auto is extremely, extremely picky about cables. I have random cables I know that work but the only ones I can recommend for sure are these:
https://www.amazon.com/gp/product/B01HF0YGCK/
Check the Android Auto subreddit for more cable advice.
Hey! I have a 18 LX and removed my pinstripes. I don’t recommend the soapy water with a flat plastic scraper method. I did one side and it took me forever and didn’t remove all the adhesive. I finally watched a few YouTube videos and found this Rubber Eraser Wheel. It works wonders. I even took off the dealership’s stickers.
Gorilla Automotive 61631 Acorn Gorilla Guard Locks (12mm x 1.50 Thread Size) - Pack of 4 https://www.amazon.com/dp/B000CMJ2QE/ref=cm_sw_r_apan_glt_fabc_SH1FR23GARHNNZ9MT7P1
I will warn you.. the thieves won't steal your rims but you will have broken windows because they'll try to get to your glove box to get the keys. Hopefully you won't keep them in there but you'll have a smashed window. Has happened twice to me, but no stolen rims lol
I recently covered my chrome with a plastic overlay in the front. I actually purchased from Amazon (https://www.amazon.com/dp/B07VKS5R24?psc=1&ref=ppx\_yo2\_dt\_b\_product\_details), and the fit and finish are incredible. Matches the rest of the black plastic grill perfectly. I did add a little bit more 3M double sided adhesive in places that seemed bare. So far so good!
A helpful tip regarding Amazon URLs. You can remove /ref and everything after it, that really just tells Amazon how you found the item. For example:
https://smile.amazon.com/gp/product/B00DBIJMVG
https://smile.amazon.com/GOOACC-GRC-30-Retainer-Expansion-Replacement/dp/B07FV5ZJL3
I had a 2019 sport for a little under a year. Has these in there from day 1 for about 10 months. Never had an issue. Should be the same bulb.
KATUR BAU15S PY21W 7507 LED Bulbs Super Bright 12pcs 3030 & 8pcs 3020 Chips Canbus Error Free Replace for Turn Signal Reverse Brake Tail Stop Parking RV Lights,Brilliant Red(Pack of 2) https://www.amazon.com/dp/B082HJ4Q69/ref=cm_sw_r_cp_api_glt_fabc_2SDCEYKKN8ACSPX6CZAR?_encoding=UTF8&psc=1
I have tried multiple USB cables, including stock one from Google and Samsung, and have had similar issues before. Notably, it would have trouble maintaining a connection to my Samsung Galaxy S20+. It would always cut off at specific areas on my commute.
The one thing i can suggest is trying out this cable:
For the most part, out has worked flawlessly ever since I swapped to this cable. No more connection loss when I go through my daily commute. My only issue is that I sometimes pinch the cable in between the center, which is damaging the cable. Letting the cable stay relaxed will definitely help with longevity.
Hot sure, this is what I bought
VViViD Extra-Wide Headlight Taillight Vinyl Tint Wrap Roll (Light Smoke 48" x 60") https://www.amazon.com/dp/B083LJC412/ref=cm_sw_r_apan_glt_fabc_71B3M0H3KJM8Q6BGY0KQ?_encoding=UTF8&psc=1
Dasaita Android 10.0 Car Radio with Carplay for Honda Accord 2013 2014 2015 2016 2017 Head Unit 1280x720 Resolution Touch Screen 4G Ram 64G ROM Support Android Auto GPS Navigation WiFi RDS Bluetooth https://www.amazon.com/dp/B08D9GKM2C/ref=cm_sw_r_cp_api_glt_fabc_VNP34EY2A4FTQNECS1QK
My 2017 had those and they sucked. These are bright as hell and have a slight blue tint.
https://www.amazon.com/gp/product/B07NPMV1H5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Autobase Silicone Key Fob Cover for Honda Accord Civic CR-V CRV Pilot Passport Insight EX EX-L Touring | Car Accessory | Key Protection Case 2 Pcs (Bl https://www.amazon.ca/dp/B0799D476K/ref=cm_sw_r_cp_apip_Wki8z3cx8Cfvt
Do you mean the valve stem cap?
Tire Valve Stem Caps (150 Pack) Black with Sealing Ring, General for Car, Motorcycles, Bicycles and Trolleys https://smile.amazon.com/dp/B07S4HGN75/ref=cm_sw_r_cp_api_glt_fabc_N07XCE65CN5HR0XCBKMK
Nice pull! I love doing the same thing in my 2016 coupe v6. I linked some paddle shifters I got for mine that I think give the wheel a nice accent and sportier look to it too if you’re interested!
https://www.amazon.com/Areyourshop-Aluminum-Shifters-Paddles-Extension/dp/B07B4TKS97
There's also these, what do you think of them? I've used them for maybe a year and a half? Gorilla Automotive 61631 Acorn Gorilla Guard Locks (12mm x 1.50 Thread Size) - Pack of 4 https://www.amazon.com/dp/B000CMJ2QE/ref=cm_sw_r_sm_apa_glt_fabc_ZA54ZEP1H9S29WXFE222
No problem—here are the bulbs that I put into my Accord. No matter which brand you go with, you want size H11–that’s the bulb size all 9th gen Accords use. Most will have a cooling fan or heat sink to dissipate the heat generated by the bulbs. Mine have cooling fans and there is a low hum that they emit when they’re running when the engine is not. It doesn’t bother me, but some people have switched to LEDs and found the noise irritating. These Fahrens have lasted me 8 months so far without any issue. Installation takes 10-20 minutes depending on how easily your hands fit into the awkward space behind the headlights.
Hi! I have a 2009 EX-L, no navi. No, there are no USB ports. I have a phone with no earphone jacks so I purchased this bluetooth adapter . It has charging ports and gives SUPER high quality audio. I love it.
Just found a 4gb model for $279
Awe crap....I just found a NEW model and now I want to replace mine again...they have one with a bigger screen that's vertical...
Thank you!! This is the system i bought: https://www.amazon.com/dp/B08ZSL57XB/ref=cm_sw_r_cp_apa_glt_fabc_GJTHKXJ4BBGF3JNT4F1V
As for the speakers, what would you recommend? I was just about to buy these:
So I decided to give up on the wireless charge and get a stand alone one that works with magsafe. This works better in my opinion as long as you don't mind it being stuck to one of your vents. You can see my pictures too when it uploads on what it looks like. It should upload in a few days, and it's under D.Yang.
https://smile.amazon.com/gp/product/B08SPX7ZJ5/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
https://imgur.com/gallery/OOuSDOW
There is a pic of how my iPhone 12 Pro with case on and my wife’s iPhone 12 with case and pop socket sit. Her phone charges even through the pop socket, but because of the pop socket it won’t stay in place while driving (she has a mount + cable in her vehicle, so wireless charging isn’t a concern). My phone sits the exact same with or without the case - I had previously stated my case was Spigen, but that’s what is on my previous X, using this Torras case - TORRAS Shockproof Compatible for iPhone 12 Case/Compatible for iPhone 12 Pro Case, [Military Grade Drop Tested] Translucent Matte Hard PC Back with Soft Silicone Edge Slim Protective Guardian, Black https://www.amazon.com/dp/B08CZK6ZQY/ref=cm_sw_r_cp_api_glt_fabc_6E64E9NNFMAKY31669QZ?_encoding=UTF8&psc=1
Just got this. I'm very happy with it...
I have this one stuck onto the glossy part of my dash just to the right of the screen/right-center air vent. It’s worked really well over the last year.
https://www.amazon.com/dp/B07XDYPG1V/ref=cm_sw_r_cp_api_glt_fabc_GZC2V75QQ7GBQ0B8PEE4
They are held on by adhesive tape but I can tell you that I've had them installed since early February and they do not move AT ALL. Couple tips for you, make sure you clean the hell out of your existing paddles (I used an alcohol wipe that came with them) and then I held each paddle in place for a good minute or so when I initially attached them.
Beyond that, I purposefully did not drive the car/use the paddles for 24 hours or so to let it all set. Since installation i'm extremely impressed and I use them every day. I can even press on the very tip of the paddle and there is little to no flex because it's real carbon fiber and very strong.
​
https://www.amazon.com/gp/product/B07RD84MY1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
This might make you laugh, though I had no idea the rear seats even had seat warmers for about the first 12 months of ownership. I happened to be back there installing a new single piece plastic mold floormat and I saw the heated seat symbol right next to the window switch. Apparently I should pay more attention to the window sticker, eh?
So, uh, Honda, what gives with the blank switch?????????????????? I gave you all the monies, and you gave me a useless piece of plastic. I feel left out of the cool kids club.
MotorFansClub 3pcs Front Lip Splitter Bumper fit for compatible with Honda Accord Sedan 2018 2019 Trim Protection Splitter Spoiler, Bright Black https://www.amazon.com/dp/B07TVHZD6C/ref=cm_sw_r_cp_api_glc_fabc_WLWZFbNRGNHY8?_encoding=UTF8&psc=1
It came fast and the paint is pretty good quality. I definitely recommend the gloss black. Can’t really speak for the other colors tho.
I personally put Cougar H11 on my mothers 2017 Sport and she hasn’t complained one bit of being able to see at night.
Cougar Motor Wireless H11 H8 H9 LED Headlight Bulb, 12000Lm 6500K Slim All-in-One Conversion Kit - Cool White https://www.amazon.com/dp/B07V9RSKYM/ref=cm_sw_r_cp_api_fabc_CekSFb8N263X3
By the way, I have since bought some epic floor mats which really help protect the carpet. Plus, when they get dirty I just take them out and hose them off. They are durable af.
A01 being counterfeit?! That's not good. Saw on Amazon a seller by the name of Aracoware selling the seemingly original Honda filters.
https://www.amazon.com/Honda-15400-PLM-A01-Oil-Filters-Case/dp/B009K4H42Y
The reviews seems legit.
Regarding Bosche selection, it's only because it's has Filtech labeling on it 😑 so in my noob mind thinking it would be comparable to the OEM.
Regarding the fitting, I've read that oil filters aren't a universal fit so that's why I'm asking.
They originally sent me the wrong ones, Amazon shipped new ones in 2 days. they’re EXTREMELY bright. I’d say about 4-5 times brighter than stock
Link: https://www.amazon.com/dp/B07NBR4BGH?ref=ppx_pop_mob_ap_share
Try amazon smile to donate to a charity of your choice automatically at no cost to you!
https://smile.amazon.com/dp/B07DX8C3QN?ref=ppx_pop_mob_ap_share
^^^I'm ^^^a ^^^bot ^^^and ^^^this ^^^action ^^^was ^^^performed ^^^automatically.
Try amazon smile to donate to a charity of your choice automatically at no cost to you!
https://smile.amazon.com/dp/B07KN48PGX?ref=ppx_pop_mob_ap_share
^^^I'm ^^^a ^^^bot ^^^and ^^^this ^^^action ^^^was ^^^performed ^^^automatically.
Yeah I have the “smoke chrome” front grill but this is actually a black gloss overlay that fits amazing! Here’s the link to it on Amazon, really brings the look together with that San Marino red!
MotorFansClub Front Grille Cover... https://www.amazon.com/dp/B07KN48PGX?ref=ppx_pop_mob_ap_share
Because I have dog and messy toddler concerns, I picked up a backseat cover. It's a good fit and I can still get to the seat beats and child seat latches. $35 well spent.
https://smile.amazon.com/gp/product/B07BTPSWC6/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
What do you mean you're going the other way? And is the OP saying carbon filters are more restrictive and not recommended for that reason? I recently replaced the filter on my '18 accord with this one. Is this something you would never use?
https://www.amazon.com/gp/product/B01LYHPPYO/ref=ppx_yo_dt_b_asin_title_o02_s02?ie=UTF8&psc=1
Do you try to avoid filters with carbon? I recently replaced the filter on my '18 accord with this one. Is this something you would never use?
https://www.amazon.com/gp/product/B01LYHPPYO/ref=ppx_yo_dt_b_asin_title_o02_s02?ie=UTF8&psc=1
Sound like a torque converter issue.
Have you done a 3x3 service on the transmission? do not flush it. Just change the fluid. Drive for a few miles, do a change again, drive for a few miles and change it again.
You can do this on your own if you have the workspace. There are several youtube vids out there to help you.
You'll need the proper fluids and crush washers to get the job done.
Never force flush the tranny.
IF you can do this yourself, you'll save yourself a lot of money.
https://www.amazon.com/Genuine-Honda-08200-9008-Automatic-Transmission/dp/B0089LSMSE
Check your manual for your transmission type and buy the required amount. IE: If I were to do a single change, I'd need 3.3 quarts to do the job on my car. a 3x3 service is (3.3 * 3) so ten quarts total. You'd do 3.3 quarts per change * 3 times.
i got these theyre unavailable rn https://www.amazon.com/dp/B07C5CVB8V/ref=cm_sw_r_cp_apa_i_p0PoFbG2XGAS3
but these seem to be the same ones: https://www.amazon.com/dp/B06ZZNZVYK/ref=cm_sw_r_cp_apa_i_59PoFbW5YT2Y7
Absolutely man. Yes I did change one thing, if you have cloth seats they can be kind of ratty. I got a set of seat covers for 100 bucks on amazon and they have made the car so much nicer feeling. I'll send you a link here to seat covers I got
This was where I got it from amazon. But it looks like it’s sold out. I paid about $56 including shipping ? I recommend if you’re new to wrapping. To buy extra. This was 6ft by 6ft and had no room for mess ups
Black Gloss 60 Inch x 6ft Car Wrap Vinyl Roll with Air Release 3MIL-VViViD8 https://www.amazon.com/dp/B00L9IYREM/ref=cm_sw_r_cp_api_i_.Jc8EbTBXK8HQ
Black Gloss 60 Inch x 6ft Car Wrap Vinyl Roll with Air Release 3MIL-VViViD8 https://www.amazon.com/dp/B00L9IYREM/ref=cm_sw_r_cp_api_i_.Jc8EbTBXK8HQ
Hey thanks!!! This was the one I use but it looks like they’re out. Ordered straight from amazon ! This process took me all day lol literally 8 straight hours of pulling, using heat gun. Watched tons of YouTube videos but still had issues.
I got mine from Amazon here - https://www.amazon.com/dp/B07RV9TMJY/ref=cm_sw_r_cp_apip_mmGgmRZj4SATS
The smoke color are kind of hard to find, most of them cost 200+ more than red or red smoke. I definitely like them a lot, especially with my MSM paint.
On Amazon from Custom Tuning. Looks like they aren't selling anymore, but you can find the same one on Ebay from Custom Tuning:
https://www.amazon.com/gp/product/B07HCN68X4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I got the amazon ones they're great. https://www.amazon.ca/SMARTLINER-Floor-Liner-Black-Accord/dp/B07D2M8MX7/ref=sr_1_11?keywords=accord+floor+mat&qid=1579161574&sr=8-11