What are
/r/crv's
favorite Products & Services?
From 3.5 billion Reddit comments
The most popular Products mentioned in /r/crv:
![WJ30-0082S-09 Series for [2005-2006] CRV Clear Lens Fog Lights + Wiring Kit Set](https://m.media-amazon.com/images/I/51YU9FZU2JL._SL500_.jpg)
The most popular Services mentioned in /r/crv:
Facebook Marketplace
ConsumerReports.org
AllTrails
The most popular reviews in /r/crv:
I'm not sure if links are allowed. This is the kit I just installed from Amazon. I just bought a 2009 CR-V in FL also and wanted to sort this.
https://www.amazon.com/gp/product/B084Q9YWR7/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
​
Easy install. A little nerve rattling, but not a big deal. Get a trim removal kit and watch a few youtube videos first.
I was looking at these for my 2002 and amazon says they’d fit your 2010. I ultimately decided against these or HID, I don’t want to be the dick that blinds oncoming traffic even if I get marginally better field of vision.
I bought these on Amazon a few months ago and I couldn't be happier. I have a 2017 EX-L and I believe I got two H11 bulbs, two 9005 bulbs and two more for the fog lights. I do a lot of night driving in the Texas hill country and I feel like I can spot the deer a lot better with these lights.
Yes, it looks completely factory. Got it off of Amazon. I have hauled an older Discovery Two on it that weighs 73 lbs over a 400 mile road trip without incident. Two smaller river kayaks at the same time. A 16 cu foot Yakima Skybox with 6 snowboards. My rack
Its common for ball joints to fail on these vehicles, I recently replaced mine with mevotech ball joints. For the press you might need an adapter kit for Hondas https://www.amazon.com/dp/B005QPLM6U/ref=cm_sw_r_cp_apa_glt_fabc_PXG6XXHTZNXZBKDC4FFD
I think these are the upgraded version: https://www.amazon.com/dp/B07YMQPH5G/ref=cm_sw_r_cp_api_glt_fabc_XMN9HY913F5YBNN0HGCR?_encoding=UTF8&psc=1
I know the guy had a hell of a time getting them in properly, and I go through headlight bulbs what seems like every 6 months, so not sure if the style is worth it… but I do love them and have gotten a lot of compliments.
I used these wipes on some trim on my '99 CRV. Now I've got to do the rest of the trim, because the piece I did looks good, while the rest look like sim faded garbage. My dad did some plastic on his Jeep, and the trim looks brand new (except he needs another coat, you can tell where he didn't get)
Prep is simple: wash it with a degreaser, dry completely, wipe it extra thorough, dry for an hour.
I'd go so far as to suggest 2 coats would be amazing. Especially since you'll probably miss a spot on the first go-around. I made sure to be thorough. Still missed a couple spots.
It does say to be careful around paint and glass. Just tape off the windows with some blue tape and have at it.
https://www.amazon.com/dp/B07SHJVK4G/ref=cm_sw_r_cp_apa_glt_fabc_MED820BVE2Z3H6Y75G3K
Draw-Tite 75742 Class III Round Tube Max-Frame Receiver with 2" Square Receiver Tube Opening https://www.amazon.com/dp/B008BVPLVI/ref=cm_sw_r_cp_api_glt_fabc_S39XPC0RJQPF1A2S2ZZX?_encoding=UTF8&psc=1
https://www.amazon.com/Winjet-WJ30-0082S-09-2005-2006-Clear-Light/dp/B00475I2HW
This is the link. The lights won't have an exact fitting, and if you need help with the installation, I'll walk you through it, since I recently had trouble.
In the US the roof rails are no longer available since Honda's supplier went under. My guess is you will run into the same issue in Canada. If your can't get them from the dealer I've been happy with this after market copy of the Honda ones and haven't had any noise issues. https://www.amazon.com/gp/product/B07YXVPT97/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
I bought from Amazon these last September. So far so good, only time will tell. My other ride has LED bulbs too, although unbranded. They tend to last around 2 years. The benefits of better night visibility far outweighs the hassle of buying and installing new ones, at least in my opinion. I keep a spare bulb on hand for the occasion.
Edit: Forgot to link low beams.
https://www.amazon.com/Guards-Hzrfun-Protector-Rubber-Protection/dp/B081RNXGZG
Try this I have it on my 2018. 32ft is plenty. Used it on all 4 doors and the whole rear trunk. Still have some leftover. Has metal and no adhesive
https://www.amazon.com/dp/B085S2TQHY?ref=ppx_pop_mob_ap_share, they’re cheap, come with an app to pick the color and effects via Bluetooth. The Mic music dancing effect crashes the lights after a minute for some unknown reason but all other modes work fine.
https://www.amazon.com/gp/product/B07NWV2YV9/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
you're gonna need a harness that mates between the coax speakers and the oem Honda harness unless you wanna do some serious splicing. Not too expensive; I think it was like $4 for a pair, which was like $8 and some change for the front and rear.
I got this one for my first gen. Was going to pay hundreds to put in a deck and then realized this is all I need. I like that it’s small and doesn’t have bright leds.
https://www.ebay.com/itm/163232279111 this is the rack that i have
and this is the basket I have ECOTRIC 64" Universal Black Roof... https://www.amazon.com/dp/B07WWGGYMG?ref=ppx_pop_mob_ap_share
If you look through my posts you can see it on the crv
I would suggest changing the cabin air filter all together, very cheap and very easy to DIY.
EDIT: I just put this one in my Ridgeline and Amazon says it fits your CRV as well. Typically you just drop the glove-box forward then slide out the old one and drop in the new one.
Walmart sells a Dual brand unit w/ CarPlay that fits perfectly with the factory mounts for around $280. I love mine and was able to install myself easily.
Mine is an 06, but I doubt there are many if any differences
EDIT: here it is on amazon Dual DAC1025BT 6.2" LED Backlit LCD Digital Multimedia Touch Screen Double DIN Car Stereo with Built-in Apple Car Play, Bluetooth & USB Port https://www.amazon.com/dp/B079LSPMYV/ref=cm_sw_r_cp_api_i_AW6iCb7AN1YRK
Here are the ones I picked up. They were packed in a cardboard tube and in great shape. Indistinguishable from the originals!
Newsmarts 4pcs Weatherstrip... https://www.amazon.com/dp/B07Q2ZYRHG?ref=ppx_pop_mob_ap_share
2018 EX-L
We got the official Honda ones from the dealer for the back seats... unfortunately it’s a pain to get genuine parts for cheaper in Canada (prove me wrong!!!!). They’re AMAZING. Our son’s boots are covered in snow, mud, and salt from the slush. He’s in a forward facing car seat and he can kick the front seats. They just wipe clean and the perforated leather is still unscathed.
We bought this off amazon Canada to cover most of the rear of the front seat. And fits our tablet if we choose.
I’m happy with the set up. Hope that helps!
I put these in. They are amazingly bright and quite easy to mount. I'd suggest you get some of that 3M VHB tape to mount the little adapter boxes in place too. Otherwise they are actually brighter than my BMW's HIDs. I wouldn't bother with the high beams you won't need them
95% likely that it's the Vtec solenoid. Either the screen on the solenoid gasket is clogged, or the solenoid is leaking. I replace mine with the OEM ones only. Don't go out and get the $30 ones from the local parts store, they're junk.
If you are able to tell that its 100% the vtec solenoid, Here is the OEM one on Amazon.
+1 for VVT solenoid. I had to completely change mine out with an OEM one to stop the leaking from there. Before changing it I tried replacing the gasket and o-rings on it, but still leaked, not sure why. You can get the OEM one on amazon for around $140, which isn't too bad. But like u/Coalmen said, clean it first, see if there are still signs of leakage. (I could spot oil dripping on the ground after short drives taking it over 3k rpms.)
https://www.amazon.com/dp/B00BFDJ3TA?psc=1&ref=ppx\_yo2ov\_dt\_b\_product\_details
https://www.amazon.ca/-/en/gp/product/B09BZQ6LCF/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&th=1
​
I use this on my 2015 CRV. It works!
This one has worked well for me. It clips well onto the dash ledge for the backup camera.
I like this one
Attaches to the air vent, I've driven over some pretty rough roads and my phone has never fallen off
Save half of your money and get a Pittsburgh jack from Harbor Freight of the same weight rating. Always place your car on jack stands before getting under it. Take the $100 you'll save getting the other jack and put it into getting some quality jack stands with a lock.
I bought a huge bottle, but honestly this smaller 1 oz would get the job done: Solution Finish - Black Plastic & Vinyl Restorer - Use for Car and Truck Detailing - 1 oz. https://www.amazon.com/dp/B006NZQ3T8?ref_=cm_sw_r_apin_dp_7SD5MX7WC6BFJKPJKATQ
I followed this YouTube on how to apply it: https://youtu.be/vAYChd1iLk0
https://www.harborfreight.com/oil-filter-pliers-61477.html.
https://www.amazon.com/Lisle-57030-Standard-Filter-Swivel/dp/B00396DMZ2
Don’t bother with oil wrenches if it don’t come off by hand use one of those style oil removal tools above (pliers or swivels)
Make sure your oil pan is under it after it starts to loosen it will start to drain oil and the oil filter will have oil in it so be careful with spilling it.
Fyi make sure your oil filter has the gasket on it sometimes you will pull the filter out and the gasket will stay on where it seats and if you put the new filter on oil will spray everywhere. Just look at it and make sure there’s a rubber seal on there like the new one then apply a film of oil to the new seal and install hand tight
When you put one on
https://www.amazon.com/dp/B07CVYHZV9?psc=1&ref=ppx_yo2ov_dt_b_product_details
When you apply, it, apply the bottom edge first and smooth out the air bubbles. If you don't it will look horrible and lifting it and reapplying won't work, you'll have to get another one.
I had this same problem with my 07. I found some on amazon that had great reviews. Everyone in the reviews bought them because they solved this very same problem. I bought them and they came with driver and passenger side and an extra refil for each one. They do the job and are cheaper than oem. WOWIPER Windshield Wiper Blades... https://www.amazon.com/dp/B095RGD9YZ?ref=ppx_pop_mob_ap_share
Update:
Just ordered 2 chip keys from Amazon for $25.
It turns out the local ace hardware will cut the keys for $5 and program them for $35. The guy said its never a sure-thing with aftermarket keys from china so well see.
Ill let you all know how it goes. Maybe this will help others in the future.
Not going to be cheap but it's hard to tell. It will depend on how much they need to paint as the panel doesn't look too bad.
You could always get one of these and just live with it.
I went with 6 1/2" Speakers. Finding mounting brackets was a pain. CRV adapters plates were $35 for 2. (2) Speaker pigtails were going for $10. Then I saw the plates linked below. They are for a Civic and I took a shot on the size. I figured you get (4) for $21 and if the plates fit they fit and if they dont, oh well.
So the plates have (2) mounting tabs at the bottom. These do no align with the CRV tabs. So a popped them off.
Before you remove the old speaker, use a marker to outline the arch of the speaker mount. I used (4) self tapping sheet metal screws on each mount. Everything aligns perfectly with the CRV door panel. And my tunes have never been sweeter.
That is the shift lock release slot, so you can manually get it into neutral if it breaks down and needs to get towed. There is usually a little cap that goes there, it can rattle off over time. It is missing on my 2004. If you just noticed it, try looking on the floor for the little cap, and snap it back on. If you can't find it, you can order a new one here, or get one from a junkyard.
Don't remove the plastic guard, you can cut it in place. Here's an Amazon review with pictures that explains it all. https://www.amazon.com/Draw-Tite-75742-Max-Frame-Receiver-Opening/dp/B008BVPLVI
Make sure you have an extension to get the bolts on.
You don't need exhaust pliers to remove the rubber hanger but it helps. I used Channellock / water pump pliers to get it off, was relatively painless.
I added cougar motors and also tied sealight from Amazon. The LEDs were a great upgrade and I had them on my car for years not sure why the other poster didn't like the. Sometimes they dim after a while but they are cheap to replace every few years.
Check if they fit your car https://www.amazon.com/dp/B07HCZ7RZ6?ref=ppx_pop_mob_ap_share
Forceum M/T 08 Plus Mud Off-Road Light Truck Radial Tire-LT235/70R16 235/70/16 235/70-16 104/101Q Load Range C LRC 6-Ply BSW Black Side Wall https://www.amazon.com/dp/B08C2YN9PF/ref=cm_sw_r_cp_apip_C6Zk9nW7TeBla
What part of your factory services are you ignoring? That’s not a great idea in general.
Anywho, here’s the factory part if you wanna diy it https://smile.amazon.com/dp/B00KTL3MJG/ref=cm_sw_r_cp_api_i_JZVRMBGP0NVTXFBF7NC8
Here’s the one I purchased but there are a lot of similar ones: https://www.amazon.ca/ViaBecs-Android-Multimedia-Navigation-Handsfree/dp/B08R1YMV6Q/ref=asc_df_B08R1YMV6Q/?tag=googlemobshop-20&linkCode=df0&hvadid=579058741647&hvpos=&hvnetw=g&hvrand=11800183663343038744&hvpone=&hvptwo...
Most steering wheel controls work except the bottom 3 that you can pick up calls with. Back up camera needs to be spliced into the factory imid input - not a difficult job, just a tight area. The unit also communicates with the IMID screen, i.e radio stations on the headunit display on the IMID. Pretty cool and all plug and play. Also comes with carplay and android auto.
I'm currently leaning towards this.
https://www.amazon.com/Draw-Tite-76128-Max-Frame-Receiver-Opening/dp/B01N2AP4AD/ref=sr_1_5?crid=N2DXZ4E3U10I&keywords=crv+hitch+2018&qid=1653318255&replacementKeywords=hitch&sprefix=crv+hitch+2018%2Caps%2C88&sr=8-5&vehicle=2018-59-754------------&vehicleName=2018+Honda+CR-V
If you read the comments etc. It doesn't require cutting anything which is great. This is not for the 2022 model however.
Forceum M/T 08 Plus Mud Off-Road Light Truck Radial Tire-LT235/70R16 235/70/16 235/70-16 104/101Q Load Range C LRC 6-Ply BSW Black Side Wall https://www.amazon.com/dp/B08C2YN9PF/ref=cm_sw_r_cp_apip_C6Zk9nW7TeBla
HQST Solar Panel Mounting Brackets with Nuts and Bolts Set of 4 Units, Supporting for RV, Boat, Roof, Wall and Other Off Gird Installation https://www.amazon.com/dp/B06Y5QX9VX/ref=cm_sw_r_apan_i_XWN9MB16WHKVPE5GM6GC?_encoding=UTF8&psc=1 these Z brackets are for mounting solar panels . I was going to likely put it on top and use the brackets on the pre drilled holes on the panel, about 2 inches from the corners of the panel, then drill through the cross bars and bolt it down. On top would create more drag than if I could mount it underneath the bars somehow.
I am setting it up for long term camping and possibly living for a month or so at a time.
I got them from Amazon Here
The only thing I don't like about them is that they aren't completely flush with the plastic but you really can't tell unless you're really looking. They're really bright though
Decided to put it here for everyone.
I grabbed this from amazon. It’s an 8th gen civic short shifter adapter, but the tricky thing is it doesn’t fit perfectly: I ended up using a scrap of copper pipe to ship it with the shift rod. And I used locktite on the hex screws when installing. https://www.amazon.com/VMS-RACING-Stainless-Compatible-2006-2011/dp/B08M1WFGRB
The second part is that you need to grab a shifter pivot cup specifically from an ‘06-‘08 civic. I can’t seem to find them anywhere new. I grabbed one from an ‘07 civic at the junkyard across town. Look for a manual ‘06-‘08, year the center console and the shifter apart, then pull the little blue cap off one of the pivots on the shift rod. This part is needed to work with the 8th gen short shifter adapter.
Those are the parts you need, and I just used this write-up to throw it all together. Sadly the pictures are broken, but I was able to do it fine based on the text. https://honda-tech.com/forums/honda-cr-v-element-156/97-01-crv-short-shifter-how-3154499/
Feel free to message me for any more info.
Having done this replacement myself, you are going to want a clamp similar to these but long enough to compress the strut enough to align them with the locations of the holes in the glass
Bolt the strut into the interior mounting hole first, then use the clamp to align the other end with the glass. Replace them one at a time, and have a golf club or something ready to help prop up the glass (a club grip worked well for me as a non skid surface). Or have a second person to help you.
You’ll thank me.
Dorman 911-776 Engine Intake Manifold Runner Solenoid.
You can replace this part yourself.
Dont chase any other code until you replace this part. It is common replacement on 05-06.
Any other repair is overkill until this is replaced.
I did this. I got the dark accent package and it was a million times better. The wood grain wasn’t my style. Of course I went a little overboard in the other direction with a semi carbon fiber steering wheel cover too.
Autsop Steering Wheel Cover, Leather Car Steering Wheel Covers for Women and Man Breathable Anti-Slip Odorless,Universal Fit 15 Inch (Black) https://smile.amazon.com/dp/B08FM74C7S/ref=cm_sw_r_cp_api_i_68W6AJR1VRXZYR05DQWK?_encoding=UTF8&psc=1
https://www.amazon.com/Pack-Matte-Finish-Protectant-Wipes/dp/B06XQYRJ2K/
It's the only Armor All I use now that I've found it, protects like it needs to but no greasy after effects.
I ended up settling on these:
https://www.amazon.com/gp/product/B07DGTTTKN/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
For a few reasons:
- No Fans to fail.
- Adjustable Beam.
- Relatively good reviews
- 6500K Xenon White
- Good cutoff so I don't blind other drivers.
They've been working great so far after more than 2 years. My only dislike about them is the highbeam doesn't offer much more illumination than the lows, though this is a common problem with pretty much all LED bulbs in a regular halogen housing.
Well parts wise, I would only trust the Beck Arnley Transmission side motor mount.
I ordered the 4 mount kit from RockAuto and the trans side mount that came with the kit was not the correct fit. Upper mounting bracket was angled in the wrong direction.
Amazon Driver side mirror glass
Just go with the buff and touch. Any good body guy can match that paint, probably off the shelf.
Replacing the wiring and door locks etc on an )% would probably create more headaches than it fixes
I had one very similar to this one for 10 years in my Honda CRV. It kept the seats underneath like new. It was easy to put in and stayed put.
Sure, heres the link: LFOTPP Fit for 2017 2018 2019 2020 2021 2022 Hnoda CRV EX EX-L Touring 7-Inch Car Navigation Screen Protector, Clear Tempered Glass Infotainment Display In-Dash Center Touch Stereo Screen Protector https://www.amazon.com/dp/B07CVYHZV9/ref=cm_sw_r_cp_api_glt_i_YMKB2YN42C6767EYQ3PR?_encoding=UTF8&psc=1
I haven’t had any issues with it so far.
It's after-market. I did a lot of research and ended up getting this one: https://www.amazon.com/gp/product/B00EPHF5E0/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
It's spendy, but we're really glad we got it, as it's super solid, fits perfect, and looks good. The alternative options consistently had reviews about how they'd fall out, or dogs get past them.
https://www.amazon.com/dp/B099DBX3VQ?ref=ppx_pop_mob_ap_share
Super easy to install. Hardest part was wiring the rear view camera, but that's not necessary if you don't need it. The actual stereo was cake and the Carplay / Android auto works flawlessly. I definitely recommend it.
Don’t have one personally but have had my eyes on this one
My 05 CEL came on a couple times during 20 F weather in the last couple weeks. Went off by itself.
I have a Bluetooth OBD2 reader, but havent bothered to check the codes.
lots of free OBD2 Bluetooth Android apps to get info
Why non LED?
I just installed these on my son's 2008
No complaints from him. Light output is whiter than stock.
6.5" is what's in the car already. So they should fit just fine.
I highly recommend getting a wiring harness adapter kit such as this one. It'll make the install easy and make servicing anything in the future easy.
https://www.alltrails.com/trail/us/arizona/montana-mountain-loop-trail
This image is from N 33.4160 W 111.1781 and is really the first time you'll need true off road capabilities (more to follow). Yesterday, at the start of the loop going clockwise, we had to drive about 12 ft across 11-13 inches (measured) water in the normally dryish Queen Creek.
I have these and have no issues.
BEAMTECH H11 LED Bulb, 12000LM 50W Fanless In Line H8 H9 6500K Xenon White https://www.amazon.com/dp/B06XHDYTGL/ref=cm_sw_r_apan_glt_fabc_2BSFPS5KADDFB018VHRA?_encoding=UTF8&psc=1
SimpleUSB Mirror to Dashcam Power Adapter (7-pin Type for Honda/Acura) https://smile.amazon.com/dp/B08167R5M3/ref=cm_sw_r_cp_api_glt_fabc_M3EANY1K1H11YZF6T1VK
This plugs into your rear view mirror.
Yes 7 inch! The trim piece came with Link to the radio: JENSEN CM7MIR 7" Media Touch Screen Double Din Car Stereo | USB Screen Mirroring for Apple and Android Devices | Push to Talk Assistant | Bluetooth | Front & Rear Camera Inputs https://www.amazon.com/dp/B09DRVCNZK/ref=cm_sw_r_cp_api_glt_fabc_2TFMDK049YJZWC8VFJP4?_encoding=UTF8&psc=1
Yes they sound great! I will drop the link and the wire harness I used. Very simple set up.
Kicker DSC650 DS Series 6.5" 4-Ohm Coaxial Speakers - Pair https://www.amazon.com/dp/B01BLVEVNS/ref=cm_sw_r_cp_api_glt_fabc_Q1WCVT5QS9JWNDNRSG1H?_encoding=UTF8&psc=1
And wire harness for easy attachment:
Metra 72-7800 Speaker Connector Harnesses for Select Honda Vehicles https://www.amazon.com/dp/B0002BEPJY/ref=cm_sw_r_cp_api_glt_fabc_R4C7F244V57D2AP6N1B0?_encoding=UTF8&psc=1
https://www.amazon.ca/gp/product/B07H811P23/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
I've been very happy with this purchase.
H1 Headlight Bulb Socket Holder Connector CRV 05-06 33116-SD4-961
In case anyone else with an 05-06 runs into a shorted one, my bulb was fine, socket was smoked...
Got these after a few misses for my 2008. Was able to replace halogen in kind with a little elbow grease to fit the weatherproof boot. Huge improvement, check out Jim the Car Guy for his CR-V LED headlight replacement tips too:
https://smile.amazon.com/gp/product/B07TQLK6SH/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I highly recommend Forever Black Trim Dye Kit. It's a brush on solution, no need to mask or take off the bumper and it's a dye rather than paint.
I've posted here before about it on my RD1. My side trim was in way worse condition but it did the job! Hasn't changed color in the past couple months and my car is parked outside.
I have repaired multiple chips like that with this Rain X kit. It’s easy to use and you’ll never see where the chip was.
Rain-X 600001 Windshield Repair Kit https://www.amazon.com/dp/B00IPS4APU/ref=cm_sw_r_cp_api_glt_fabc_E1MS3NCSXK4X542A7Q85
https://www.amazon.com/dp/B0789WQ49X/ref=cm_sw_r_apan_glt_fabc_4S0FMBQW5EMN05FSSZG0. This is close to the kit I bought for mine but it also came with the high side line. It was a pretty big job but if your handy you can do it. It took me about 16 hours to do and was well worth it. You will need to find the pag oil fill specs online and make sure to get the shipping oil out of the compressor. Ive got a video on my youtube on how to remove the stuff from under the dash eg. the blower motor cpu and expansion valve and the evap coil. There's already alot of good vids on the compressor removal, I went for out the bottom and im glad I did. You probably want to buy a new serpentine belt and put that on when your done for posterity. If you dont want to diy then just find a reputable mechanic but 3000 is steep the highest quote I got was 2000 but where I live ac is mandatory so it would be worth it in the end.
if the lenses are supper fogged up i think it's best to just get a new set. This is what i plan on buying.
​
Rear Upper Adjustable Control Arms
You should really have a mechanic inspect the suspension though.
I have front wheel drive, so if you have 4 or all wheel drive this may not apply....
I just finished replacing all 4 stabilizer links, rear passenger side wheel hub, both front control arm bushings, and replaced stock rear upper control arms with adjustables.
Struts all around were fine...
New 16" tires all and 4 wheel alignment...
My CRV drives and handles like new...
Gas explodes then burns. You can get a better, metal gas can,
​
​
I have this one for years. Use it for lawnmower gas.
and link to the post to make sure the caps don’t come off
I put this one into my 1st gen, it was an easy install because I purchased the custom wiring harness connector from Crutchfield with the head. Works great, and the manual volume knob is awesome to have within reach.
It's not difficult to install, but not a cakewalk either. You do have to take a lot of the dashboard apart, but there are several good YouTube videos on this.
Also, if you are going to replace the factory speakers, make sure to get a set of these for the speaker connections.
Honda discontinued the roof rails because the supplier went under so you can only get the unremovable OEM cross bars. I got this one on Amazon with silver rails and crossbars. If I was to buy it again I'd get the silver rails with black crossbars since the silver ones are painted plastic but you can't see any of the scratches unless your loading something onto the rack. I've left the crossbars attached during the summer and have not had any issues with vibrations or whistling while driving that people have complained about with some of the other 3rd party sets.
I have a tent that straps to the back of an SUV. Then you can fold the seats down and have plenty of room. I went down to Orlando for two weeks and it was nice having it vs just inside the CRV.
Rightline Gear-110907 SUV Tent, Sleeps Up to 6, Universal Fit, Orange. https://www.amazon.com/dp/B00NGJEN5K/ref=cm_sw_r_apan_glt_fabc_KMGNAEQRY8D5VSBZ1QBQ
I have this dope little combo bottle jack + jackstand and it works great for servicing. I'll probably eventually grab another one to throw in the cavity in back under the picnic table because the stock scissor jack is such a pain. One of the reasons I bought it is because it has a full metal plate on the bottom so you can use it on dirt with no problems, other reason I got it is you can pre-extend the stand part to get more usable throw out of the bottle for lifting taller vehicles (I also have a Fnord Exploder).
Great little jack, used it several times this summer. A little big if you don't have a gen 1/2 with the vestigial spare tire cavity you can stash it away in though.
Right after bringing home our 2021 CRV Touring I ordered the following item from Amazon so we could have wireless CarPlay: https://www.amazon.com/gp/product/B092VVFW3C
I have not had any issues connecting my (iPhone 11 Pro) and my Wife's (iPhone 12 Pro) phones to the car since. I typically use Waze and Google maps and play music through an app on the phone (LiveXLive or Spotify) while driving around so would notice any glitches or issues with the display and audio.
As u/20ghosts mentions, I'm not using bluetooth to connect to the car, so no HondaLink for me!
Some would call it gilding the lily, others might even call it polishing the turd, I'm going with "kintsugi".
Doing some electrical install and wanted this GGGT (gross grey goo tape) gone. I think it's duct tape, and it's obviously not designed for this. Sometimes you don't plan on doing something till it starts haunting you.
This is the interior harness tape I used: https://www.amazon.com/dp/B07Y9VTPTF
Use CERAKOTE Ceramic Trim Coat Kit - Quick Plastic Trim Restorer - Guaranteed Restoration to Last Over 200 Washes – A Ceramic Coating, Not a Dressing https://smile.amazon.com/dp/B07SHJVK4G/ref=cm_sw_r_cp_api_glt_fabc_FQHD4FKHY94HPWPZAD5N?_encoding=UTF8&psc=1
My crvs trim looked like new afterwards
Oh I just installed one on my 1st gen and it came out great, the exact one I bought is sold out but it was this style not the radio but close enough
Chemical Guys CLY_113 OG Clay Bar & Lubber Synthetic Lubricant Kit, Light/Medium Duty (16 oz) (2 Items) , Yellow https://www.amazon.com/dp/B0186RUIGO/ref=cm_sw_r_cp_api_glt_fabc_85QE1TX4MG2DZJ7MF3GM?_encoding=UTF8&psc=1
I’d say the most important part is to keep it wet and if you drip it on the ground it’s junk!
I recently bought these and they turned out great. Can't even tell they're seat covers, no wrinkles or anything. A little challenging to install but it was worth it.
Unfortunately they seem to have gone up VERY recently. Here's the cheapest one I found currently listed. For reference, I just placed an order for another set 2 days ago for $68 and the listing is now discontinued, so it seems they get relisted and price changes often. You can also get them very cheap from RockAuto, I just needed the faster shipping.
Previous owner spray painted your front bumper black and didn't tape the bottom of the passenger headlight, so there's black overspray on the bottom edge. It's a small aesthetic flaw, I'm mostly recommending it because yours are oxidized, which reduces light output and clarity significantly.
I bought these for my 2018 and the fit perfect - can't tell they are even seat covers. Wipe down nicely too. Was a bit expensive but well worth it!
​
Mine was pretty bad and used this stuff on CR-V and my Tacoma…. Works miracles!
Solution Finish Black Plastic & Vinyl Plastic Trim Restorer - Car and Truck Polish - 12 oz https://www.amazon.com/dp/B006NZRAFE/ref=cm_sw_r_cp_api_glt_fabc_XTDS2KGTZXE137R1V05D?_encoding=UTF8&psc=1
Try cerakote ceramic trim coat worked great for my 07 CRV faded plastic
CERAKOTE Ceramic Trim Coat - Guaranteed Restoration to Last over 200 Washes - A Ceramic Coating Not a Dressing - Quick and Easy to Apply https://www.amazon.com/dp/B07SHJVK4G/ref=cm_sw_r_cp_apip_mMwH1J9urgVWg
I spent 100$ Canadian on a dashcam from my security camera wholesaler. It's a Hikvision dashcam. Here's an Amazon Canada Link.
It's got Wi-fi built in (so you can connect your phone to it) to view photos and videos, edit the settings, and even download videos or photos. It comes with a remote as well that I have stuck on the dash. The remote only works when the phone isn't connected to it via wifi. It needs an SD card and a USB power source (it comes with a 12 volt adapter too, but I have mine powered off of the radio). Hikvision has an app for you to use to connect to the camera. But my advice is remove the SD card to download the footage... using the wifi on it is painfully slow (but I have used it).
It's a nice little dashcam.
Here's a clip that shows the clarity and why I NEED a dash camera. My city is full of these idiots.
Most manufacturers have wind deflectors that you mount on the front cross bar to help.
> Thule evo clamps
Just purchased the below linked pair to go with the Roof Rails and happy with the choice. Friend went the Thuel clamps route and looks are kinda meh and can notice extra noise.
https://smile.amazon.com/gp/product/B07H4KP5F5/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Getting a budget aftermarket radio for $60 will not only let you play USB/aux/bluetooth, but will actually improve the sound quality coming from the stock speakers, in my experience with 3 cars I've owned.
There's an example. Modern head units can also probably play a wider range of audio formats from CDs.
Not sure what your surfing plans are, but:
I've been using soft racks that look a lot like these for many years:
Not that brand - I bought mine at a local east-coast surf shop. I've had them on two Honda Fits and a CR-V. Always been careful, never gone over ~68mph, and never tried to carry multiple boards at once.
Your mileage may vary - I'm not trying to say that I can guarantee it'll work perfectly for you, just trying to say that surfboards don't necessarily require full hardmount roof racks.
I have this one which mounds to the spare tire. It held my super heavy mountain bike well, even if it was terrifying.
There's also roof rack options if your car has a roof rack.
NINEO from amazon for high, low and fog lights. Its been almost 2 months now, so far so good.
https://www.amazon.com/gp/product/B01FKQVZQQ/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
They were kind of hard to install on the front seats and I had to cut holes for the armrests but end result was nice
These fit great. https://www.amazon.com/dp/B01M4NRZAG/ref=cm_sw_r_cp_apa_fabc_uyb2FbH71SRHP?_encoding=UTF8&psc=1
I haven't purchased a screen for my sunroof yet, so can't make any recommendations.