What are
/r/hondagrom's
favorite Products & Services?
From 3.5 billion Reddit comments
The most popular Products mentioned in /r/hondagrom:
The most popular Services mentioned in /r/hondagrom:
The most popular reviews in /r/hondagrom:
I have this one but honestly, if you're leaving the grom unattended you're best bet is a heavy duty chain / lock set up. They're just too easy to toss in a vehicle and disappear. Full coverage insurance and storing inside are the safest. But for insurance purposes this will do... https://www.amazon.com/dp/B0822R6FRM/ref=cm_sw_r_cp_apa_glt_fabc_A0W92NAVHKH9E5MD1DC5?_encoding=UTF8&psc=1
This little kit. Used to need it constantly for my 77 Cj360 but knock on wood I don’t need it for the grom! Cruztools SpeedKIT Compact Tool... https://www.amazon.com/dp/B008OXJIGW?ref=ppx_pop_mob_ap_share
Sure thing. The direct link is Nilight mounts on Amazon. The lights are Nilight LED Pods on Amazon.
These brackets are a good 1" "tall"/thick, and pretty beefy. A smaller bracket would fit better, but I haven't found one.
These are common and cheap. Work pretty well on mine.
Because the Grom runs AC to the halogen headlight, I either had to modify wiring, or get a rectifier to change it to DC for the LED. I learned that when I fried the first bulb I bought. 🤦♂️
I opted to go with a rectifier for simplicity, and this way my high beam indicator still works. Got that here:
https://www.cyclopsadventuresports.com/Rectifier-for-LED-Light-Module_p_85.html
The bulb was a cheap bulb from Amazon. https://www.amazon.com/dp/B07QBYFVX6/
Quick and simple plug and play
These are good. Hoosier Garage - Pair of Stealth Style Motorcycle Mirrors - Kawasaki, Suzuki, Honda, Victory https://www.amazon.com/dp/B00CHCPT32/ref=cm_sw_r_cp_apan_glt_fabc_YVE2AFVPW47P6YPH9K33?_encoding=UTF8&psc=1
Thanks again for recommendation. Just ordered one of these & another product called Damprid. Should help cut down humidity/moisture. I may also get a can of Scotchguard Water Shield if the tent isn't rain proof enough.
The hardest part of the delete was cutting the tip sensor area. I used a Dremel, but the instructions say it can be done with a hack saw pretty easy. Other than that, it's pretty simple, took me about an hour total.
Mirrors are these; https://www.amazon.com/dp/B085TB3C26/ref=cm_sw_r_cp_apa_glt_fabc_8RF2VKSCWNXS47VV9VQM?_encoding=UTF8&psc=1
The coating is easily scratched, but the build quality is top notch otherwise.
VOFONO Compatible with for Honda Grom 2013-2019 Front Amber Flush 12 LED Turn Super easy instal.
Signals Blinkers Pack of 2 https://www.amazon.com/dp/B01LC4QBB4/ref=cm_sw_r_cp_api_glt_fabc_P7D5STFSMSMN3DN2N1SY?_encoding=UTF8&psc=1
Very nice! If I travel somewhere that I know I'll be for a day or more, I'll bring the Grom. Makes life much more enjoyable.
The ramp I bought off amazon is now listed as $88, but prices fluctuate.
https://www.amazon.com/gp/product/B018SCMIR4/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
It's a Chinese unit they relabel and rebrand all the time. It ranges between $70-90 on Amazon. Just search "Motorcycle carrier" and see what comes up. I see one that's $73.99 right now that looks like the same model. It's rated up to 500lbs, but the biggest bike I've carried with mine so far is my YZ250F.
I'm 6'4" so I can feel about 80% of your pain.
​
The two things I did to get more comfortable was picked up this seat from Amazon for about $100, it eliminates the hump and makes it so much easier to slide back a little.
https://www.amazon.com/gp/product/B07D5M1FKW/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
​
Also I got the Pro Taper XR50 handlebars, they are a bit taller than the stock bars and then like you when I installed them, I have them angles more forward to the point that they are almost straight up and down, and my riding position is so much better.
​
​
Also just accept that you look ridiculous on it and embrace it. :)
I used these mirrors.
https://www.amazon.com/gp/product/B07TM8HCN2/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
It took some work to get the caps off the end of the bars. Ended up wrapping the cap in a cloth and then using vice grips to break the thread locker free. Also needed some washers to space them out since they pinched the throttle.
My friend helped me get my nerd on. He designed, cut, and applied these awesome Dragon Ball Z Capsule Corp. decals. We used 3M reflective vinyl It’s black and shines silver when light hits it.
💥🌽🚿
I believe it's this one if I remember correctly…it's not perfect but it is much more comfortable and gets rid of the annoying hump. grom seat
There are a lot of good ones on amazon for around $40. I use this one
I got mine on amazon, Motorsports Fender Eliminator, for about 40 bucks.
Vagabond Motorsports Honda Grom... https://www.amazon.com/dp/B01M0VTHCF?ref=ppx_pop_mob_ap_share
It's pricey but is very well built and utilizes all your oem lights, including the license plate light. If you don't want a subcage ID recommend this kit.
I work on cars, like certified. I would have assumed the brakes too. However, a runout Guage is where I would start. Rotor on rim rim on bike (it's magnetic) I would mount it to the fork. Set my gage to 0 while making contact. And turn the tire with the wheel off the ground to see rotor runout. Then same to the rim. If rotor is good(within spec) and rim is good (within tolerance) then jump to the tire. Every tire that goes over 20mph should be balanced. (Including bicycle) balance beads work. Most my grom buds around here run sticky weights or beads.
Here is a link to the Guage. Harbor freight has them too if in more immediate need. https://www.amazon.com/Indicator-Magnetic-Holder-Adjustable-Tester/dp/B08DFKCWX4/ref=mp_s_a_1_1_sspa?adgrpid=61539259328&gclid=Cj0KCQjwnbmaBhD-ARIsAGTPcfWd6hiyCERoX8VNyQkCsXQLSf4fyICpNeFvye9VhWjkvbU9gNti_WIaAjqVEALw_wcB&hvadid=409999042695...
I used one of these cheap metal holders when I had a grom and it worked with no issues
https://www.amazon.com/Spinner-Length-Clutch-Spanner-Removal/dp/B08JM82VHN
Youl need this tool to get the oilspinner out. Other than that i think it's fine.
If your grom doesn't have a modded oil pickup, you should get one of those too. It will reduce oil starvation when doing wheelies.
Hey I’m currently doing this swap myself. For the carb I went with the Nibbi PE30 along with the Nibbi 250cc intake manifold. Then to achieve that 90 degree elbow you need I found these on Amazon and are a perfect fit!
Just run the Amazon exhaust. I daily stunt, wreck, and drop my bike and the exhaust is still holding perfectly. The springs are still in place, it works well and if you find it too loud you can leave the baffle in. As the answer to your question check this out. https://www.amazon.com/Yoshimura-Exhaust-Street-Stainless-Carbon/dp/B09ZQ2BW9H. I do not run this, but have coworkers that do and love it.
I've run DID, SK and Renthal chains in the past. I prefer DID for some reason. It seems there is only 1 x-ring 420 chain by the brand Niche. Never heard of them but I'll likely link of up and give it a an evaluation.
Here is what I will upgrade to down the road unless I determine the Niche brand chain to be reliable/durable...
https://www.amazon.com/D-I-D-420V-124-124-Link-Professional-Connecting/dp/B00TQQP53G
https://nicheindustries.com/products/niche-420vm-x-p?variant=41486865989823
I have these and I really like them. They’re much wider than the stock ones, in addition to being lower and further out, so the field of view is much better. I have been pleased with their quality, though I’m sure you can find better quality ones.
Yeah I see a handful of 125cc engines on Amazon like this. But would they work? T
I went with the Coffman mini tip and its great.
I bought these from Amazon, and I place them “up” above my hands and “horizontally” with the pointy ends out. It works great. They don’t obstruct my hands from the grips, and the field of vision is wayyy better than stock. I thought about placing them “down”below my hands, but wouldn’t have been able to see them through my arms.
Here a link for them bar end mirrors
They are in fact. Adjust out almost a full inch. https://www.amazon.com/Hopider-2014-2019-2011-2013-2013-2015-2013-2019/dp/B07XVBMBYB/ref=mp_s_a_1_6?crid=313U4KKUJ3EUE&keywords=short+brake+and+clutch+levers+honda+grom&qid=1659717589&sprefix=shorty+brake+and+clutch+levers+honda+grom%2Caps%2C124&sr=8-6
I got some from amazon, brand is fenrir. They’re some bar end mirrors and I love them. Give you a more comfortable approach when compared to stocks, and personally I like the looks better.
Attached are the mirrors, and youtube video on how to remove the stock bar ends, which can be pretty tight and the screws can mess up quick. Also, they sell the hole plugs for the stock mirrors, so that way you don’t have an empty hole where the stocks used to be.
The kid I got the bike from only had one mirror lol. I just got these cheapo ones on Amazon to be able to see. I haven't seen them move around too much while riding for the price and I can see behind both my shoulders. They screw right into the bars. https://www.amazon.com/gp/product/B01MR1ZNCD/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Yeah I will prob do that. Will this chain work? https://www.amazon.com/Primary-Drive-Professional-2014-2015-2017-2020/dp/B079Y7NPFX/ref=mp_s_a_1_4?keywords=honda+grom+chain&qid=1658539646&sr=8-4
I got these: kemimoto Motorcycle Handlebar Bar... https://www.amazon.com/dp/B072BQJ63D?ref=ppx_pop_mob_ap_share
Because they work great with my Womet Tech Bar end sliders that I already had. https://tstindustries.com/womet-tech-bar-ends-grom-mx125-monkey.html
ENDURANCE JC92 EL80026PA1 Rear... https://www.amazon.jp/dp/B09GXCW9Y4?ref=ppx_pop_mob_ap_share
Rear Box, Mono Key Case,... https://www.amazon.jp/dp/B096RHMZWV?ref=ppx_pop_mob_ap_share
Case is 45L
Its stretched, its a pretty easy mod to do, i dont know anything about this specific brand but this is a example of the kits to stretch them
Yeah but the carrier is still a damn good one, just take Renegades earlier advice and you will be all good to go, Just make sure you get good straps to strap it down. Renegade said he uses 2 straps for the handlebars. Personally i prefer actual handle bar straps as well as a Rear moto strap
https://www.amazon.com/gp/product/B07B7GWT95/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
​
I use this to hold my can of pepper spray and vape while riding. Too much fuckery here in NYC!
Seems like you’ve got something stuck at the bottom of the keyhole. I don’t think your key is going all the way in which explains why it won’t turn - the lock isn’t actually unlocked. Don’t try to force the key in, get a little hook & pick set on Amazon and try to get whatever might be down there out. Could just be dust & dirt or a little stick or something.
https://www.amazon.com/dp/B07JYWND74/ref=cm_sw_r_cp_api_i_CG26MPZ8EFG50P8C0955
Idk man. I dont remember having to take them out. I have end mirrors in mine. The stock one I remember having a time with. Had to use an impact screwdriver just to break the screws.
ProTaper SE Handlebar Jet Black KLX110/DRZ110 2176D BLACK https://www.amazon.com/dp/B009XIPUG4/ref=cm_sw_r_apan_i_9QD6W7VGG00ASSTMD0RJ
I have these on mine now. Have a couple different end set ups too.
You sure it's not just some sort of cap that slips out? Or force it in I guess. Manufacture may add that to keep out moisture. All the end set ups come like this unless you are buying for a stock handlebar. I have protapers, just hollow tube.
CICMOD Universal Motorcycle Street Bike 7/8" Handlebar Grips Bar End Plugs (Black) for Kawasaki Suzuki Yamaha Ducati Triuph https://www.amazon.com/dp/B016MFA51U/ref=cm_sw_r_apan_i_KNPK65S45W6Q1E8KKPQY
Congrats on getting yours!! Also, here’s the link for the mirrors i’ve got
https://www.amazon.com/FENRIR-Aluminum-Motorcycle-Handlebar-Universal/dp/B08PP55WV7/ref=mp_s_a_1_5?adgrpid=122661503437&gclid=EAIaIQobChMInZ7b09z-9wIVZRh9Ch3egQAiEAAYASAAEgLdFPD_BwE&hvadid=523260715563&hvdev=m&hvlocphy= Congrats on getting yours!! Also, here’s the link for the mirrors
9029814&hvnetw=g&hvqmt=e&hvrand=14688609056926652894&hvtargid=kwd-1189016712605&hydadcr=8002_11337704&keywords=fenrir+mirrors&qid=1653621647&sr=8-5
this is the answer. Also, look into this: https://www.amazon.com/HardRacing-Support-Bracket-2013-2020-HRP-SSB/dp/B01KYL9XJS you can get em cheaper from hardracing directly.
MZS Clutch Brake Levers Short Round Adjustable CNC Red Compatible with GROM MSX125 2014-2022 | CBR250R 2011-2013 | CBR300R CB300F CB300R 2014-2021 | CBR500R CB500F CB500X 13-21 | Monkey 125 19-21 https://www.amazon.com/dp/B01C5MO35I/ref=cm_sw_r_apan_i_JYXG167GF4K24KF823E2?_encoding=UTF8&psc=1
These are the mirrors I put on my 2022 Grom, I really like them. I had to use different bolts to mount them to my bike. I'm not sure if you will need to do the same.
MICTUNING Universal Motorcycle Mirrors - 3 Inch Round Folding Bar End Side Mirror https://www.amazon.com/dp/B07FCCJR87/ref=cm_sw_r_apan_i_YBN3NS5XZ27CZQRNZ2W2?_encoding=UTF8&psc=1
Sorry for the delayed reply. Mockins 500 lb Capacity Anti Tilt Motorcycle Carrier Set | 73.5x31.5x5.5 Heavy Duty Steel Dirt Bike Hitch Hauler | Dirt Bike Carrier Hitch Mount & Ramp | Motorcycle Racks for Pickup Trucks , SUV, Car https://www.amazon.com/dp/B087YTGGTJ/ref=cm_sw_r_cp_api_i_VRF34WMHXDHZR43HQ3SV?_encoding=UTF8&psc=1
45L generic china box
Rear Box, Mono Key Case, Motorcycle Top Case with Backrest, Large Capacity, Motorcycle Top Case, 2 Keys, Silver, 13.7 gal (55 L) https://www.amazon.co.jp/dp/B096RJHKVH/ref=cm_sw_r_apan_i_QKQV6JBJXZ5DP19HZJR9?_encoding=UTF8&psc=1
1L Fuel Friends tank Custom bracket
Pelican R60
you can cover most of the items in the way with foil ant tape, and spray the areas around with water and work fast on the weld. or take a hack saw blade and cut a grove, get a impact screwdriver (https://www.amazon.com/VCT-Impact-Screwdriver-Remover-Reversible/dp/B08CTJW2KX/ref=sr_1_15?crid=WV3U6WM7KXR8&keywords=impact+remover&qid=1652058909&sprefix=impact+remover%2Caps%2C84&sr=8-15) then hit it a few times and itll come right out, might even be able to hammer a torx into it and use same tool without the hacksaw work
Thanks, the front straps are from ProTaper and are great (https://www.amazon.com/Pro-Taper-Tie-Downs-BLACK/dp/B009XIP942). The rear wheel strap is from an Amazon seller called Moto4U but makes for a great rear strapping point since there's no subframe that i can easily latch on to: (https://www.amazon.com/dp/B075QB2NFM)
I also bought this setup to see if i could make it fit since there arent currently any mounts but after removing my oem headlight. It looks like the oem brackets are in the way for the fork mount to clear.
LisylineAuto Motorcycle Headlight Housing 7 Inch Headlamp Shell Head Light Cover for Harley Kawasaki Honda Yamaha Suzuki Chopper Cafe Racer Bobbe BMW Aprilia Universal(Matte Black) https://www.amazon.com/dp/B089QCFR1K/ref=cm_sw_r_cp_api_i_12801PJ2CMQSTC4K7VH1?_encoding=UTF8&psc=1
Its an amazon light. LED Headlight for Wrangler AAIWA 7" Round LED Headlights 75W Headlamp with Daytime Running Light DRL High Low Beam compatible with Wrangler JK TJ LJ Motorcycle with H4 H13 Adapter,2PCS https://www.amazon.com/dp/B07FMQMMN6/ref=cm_sw_r_cp_api_i_Y61B9S7WGZ5F4DXJF04J?_encoding=UTF8&psc=1
FENRIR CNC Aluminum Alloy Cafe Racer Black Motorcycle Bar End Mirrors Side 22mm 7/8" inch Handlebar Mirror Universal Rear View For M8/M6 Standard Super Sport Naked Street Bike Cruiser Minimoto Scooter https://www.amazon.com/dp/B07XT7RQDZ/ref=cm_sw_r_apan_i_SACJ935GR7GFZ62KA2JB?_encoding=UTF8&psc=1
Those lights are known to kill batteries. They pull a constant drain. I installed a switch in line with the passive lead. Kingshowstar 12V Waterproof... https://www.amazon.com/dp/B07VCBZVJJ?ref=ppx_pop_mob_ap_share
I also got some off Amazon, however I haven't had any problems securing them to the bars. These Fenrir mirrors come with heaps of mounting hardware too, for different sized bars. Overall, I'm pretty happy with them.
I have the 45L
Rear Box, Mono Key Case, Motorcycle Top Case with Backrest, Large Capacity, Motorcycle Top Case, 2 Keys, Silver, 11.2 gal (45 L) https://www.amazon.co.jp/dp/B096RHMZWV/ref=cm_sw_r_apan_i_NZYXH3K8ETV4BGAAH023?_encoding=UTF8&psc=1
Thank you! Yeah the mirrors are good. Not too small, easy install, and no wobbling. If you're interested, you can get them here.
The whole bike was modded when I bought it so idk the guy's setup before me but they look something like this one
I just did a bar swap (pro taper KLX125 height) and added new Domino grips along with a Kitaco throttle tube. It says 15% improvement, but I really think it's much more significant than that. Huge difference in throttle response now and not nearly as much "twist" from zero to full. It's was cheap on amazon $13.95 and came in about 6 days after order.
In about to do the same thing. I ordered the oem filter and oil off Amazon.
HONDA 15412-MGS-D21 ELEMENT, OIL FILTER https://www.amazon.com/dp/B00I87DQK8/ref=cm_sw_r_cp_api_i_PTJVPFW7T7Z4JXR6YB53?_encoding=UTF8&psc=1
Honda Pro GN4 Motor Oil - 10W30-1 Gallon/- https://www.amazon.com/dp/B00NO0QZMU/ref=cm_sw_r_cp_api_i_521DX629NABSK6X2M85D?_encoding=UTF8&psc=1
RGB LED Rock Lights, YCHOW-TECH 4 pods Multicolor Neon Underglow LED Lighting Kit with Phone App Control Timing Music Mode Flashing Automatic Control Waterproof Wheel Well Light for Truck ATV UTV SUV https://www.amazon.com/dp/B07PWGTFHG/ref=cm_sw_r_cp_api_i_QXC26DT69GC5SB1FR567?_encoding=UTF8&psc=1
For anyone interested, they work without a relay, but your indicator on the dash will be stuck on, so I put a relay in as well. They do require mount plates, which I picked up from TST. The rears can also be wired to the brake light so they have a red LED for extra visibility when braking, but I didn’t want to splice into the brake light because I’m probably going to an integrated tail light in the future.
Link: LivTee Super Bright 4PCS... https://www.amazon.com/dp/B07Y8B5PB9?ref=ppx_pop_mob_ap_share
For the price its fantastic
Motorcycle Slip On Compatible With Honda Grom Msx125 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 https://www.amazon.com/dp/B08RMMM8DQ/ref=cm_sw_r_apan_i_ETFNX1HG6XHZHTZSP50A?_encoding=UTF8&psc=1
labwork 2pcs Amber LED Flush Turn Signal Lights Brake Tail Blinker Indicator Marker Lamp Replacement for Honda Grom 2014 2015 2016 Flush LED Turn Signals Blums https://www.amazon.com/dp/B07WZN1FPM/ref=cm_sw_r_cp_api_i_DJPSP3CY7FEKZHG978J3
Ignore the year, the keep the same plug and shape.
Thanks Enjoy MFG Seat Cover is a Compatible Fit for the 2013-2015 Honda Grom MSX 125 White Sides/Black Top https://www.amazon.com/dp/B00UNV5UXS/ref=cm_sw_r_apan_i_BEY72VS1V0W95983W21T?_encoding=UTF8&psc=1
I just installed this one in my ‘22. Loud with the baffle in, screams without the baffle. Bolts up just fine.
YOSAYUSA Complete Exhaust System Motorcycle Exhaust Slip On Muffler Baffle For Honda Grom Msx125 2013 2014 2015 2016 2017 2018 2019 2020 2021 Stainless Steel (Black) https://www.amazon.com/dp/B08ZY3TDXR/ref=cm_sw_r_cp_api_i_JQBS40YE1ESDC8990538?_encoding=UTF8&psc=1
This is the one I got This
Unfortunately I did end up getting some bar end mirrors that were not compatible at all.
The way the Womet Tech bar ends work makes it impossible to use the pieces that came with the mirror.
The only way I saw that it might work was to not use the color ring that tye Sliders come with ( I chose Gold ), measure the width of that section of the slider, and get bar end mirrors that will clamp onto it instead. 7/8 mirrors simply weren't large enough.
Otherwise, attaching the mirrors the best I could, they would always twist along with the throttle.
I just recently sent the bar end mirrors back, but I don't have an instrument to measure the metal slider component, so sorry if I'm not too helpful. You might also look into getting some bar end mirrors with a long stem because the ones I got were so short that even if I had gotten it tightened down, the mirrors couldn't be positioned past the slider and looked terrible.
Here are the ones I got:
2pcs 7/8" 22mm Motorcycle Mirrors
Here is the link. Fair warning, I had to adjust my throttle tube because the bar end of the mirror was causing it to stick. The metal used in the hex head/Allen head screws are pretty soft too, so torque with caution. Aside from that, nice mirrors!
When tightening things into aluminum you really should use a torque wrench. I can't remember if those are M5 or M6 bolts but into aluminum that's 4.5ft/lbs or just under 9ft/lbs respectively which seems really light, if it stripped, you did over torque it. There should be enough material to repair the threads with a helicoil kit: https://www.amazon.com/XT-AUTO-Stainless-Compatible-Repairing/dp/B07KM1RQWP
Take a look at these as well. I am using them on my Monkey, and both my boys have them on their Groms. They don't really increase the overall width of the bike like bar ends do, which can be a blessing if you have a tight garage or lane filter.
Your welcome! Luckily bar end mirrors are pretty universal. This is the set I put in my Grom. Only thing I had to do different was find a bolt that fit. The bolt these mirrors ship with is too big. You may also need an impact driver. Those factory bar end caps are on there pretty tight. https://www.amazon.com/dp/B07FCCJR87?ref=ppx_pop_mob_ap_share
These are what I got, got another set for my SV650 I liked them so much. Although I didn’t have to swap my handle bars on the grom to install them. Those bar ends are a real bitch. I couldn’t remove them. But 10/10 recommend wider bars from pro taper. Also cam and tune comboed with exhaust and intake made the bike much more streetable. Gave it top end power, higher rev limiter, and just more power all around, could actually pull hills lol. My set up is Tbolt cam, DHM flashed ECU, chimera, and zoom loop exhaust (don’t need a $300 pipe a cheapy from Amazon works too. The istunt is loud and sounds nice)
/u/Smokeybearvii 's friend may be able to confirm but it looks to be a Givi A660. I have no personal experience with it but tracked it down by manufacturer name and google images. I could not find a picture of one on a 2022+ GROM but found OG GROM photos with the A660. They are universal and clamp onto the handlebars.
If I'm understanding the question correctly I'm running this one.
Belly pan fairing Side panel lower under cover Replacement For Honda Grom msx125 sf 2016-2020 (All Color) V1 (Green) https://www.amazon.com/dp/B08Z3MWVJZ/ref=cm_sw_r_apan_glt_i_YGQ9FBX0VE1SGV6V3JFT
OHMOTOR Motorbike Protective Armour Chest Back Spine Armor Protector Motorcross Armoured Jacket Clothing Men Women for Motorbike,Dirt Bike,Skating https://www.amazon.com/dp/B01CCH71FA/ref=cm_sw_r_apan_glt_i_MBKXY6VNKBJN7D7XZKPH?_encoding=UTF8&psc=1
No problem at all. Glad I could help. I also use a front brake lock Monster Fairings Silver Motorcycle Handlebar Grips Heavy Duty Adjustable Anti Theft Motorcycle Lock for Protection https://www.amazon.com/dp/B08JQPKP3N/ref=cm_sw_r_apan_glt_i_7B3X8Z0HHHKGJQMHP237?_encoding=UTF8&psc=1
This is the "Amazon" exhaust most people refer to. Ransoto/kemimoto brand. Pretty decent sound for how incredibly cheap it is.
Here is a link to the exhaust I bought. This is the amazon exhaust most everyone gets. Kemimoto/ransoto. Cheap and sounds good enough until one can get a better setup.
I think you're going to need something, either the springs or a clamp/band. Maybe something like this would work and not require a visit to a welding shop: https://www.amazon.com/Blesiya-Stainless-Exhaust-29mm-31mm-26mm-28mm/dp/B07JRH8NQW
Where should they put the spring loop? Top, bottom, left, right, 5 o'clock? Is there only one loop or two? What if your muffler used a clamp and no spring loops? They can't possibly customize the pipe for every customer, but they should at least include the spring clips. You could maybe cut them off your old pipe or just buy new and have them welded on: https://www.amazon.com/Exhaust-Stainless-Rotatable-Mounting-Motorcycle/dp/B07WG8T2S7
I have this one I use for my 2020 grom. I have it on my ford edge with a class 2 hitch receiver. It works well.
Don't mind spending some yennies on it.
Was looking at this from OVER
OVERRACING TT-Formula RS Full Titanium Government Certified GROM(13-16) 16-22-051 https://www.amazon.co.jp/dp/B01KO18NWG/ref=cm_sw_r_apan_glt_i_YMZ2WQ6TZ2QPAVJ57JZE
Here you are
Best finish will be a 2 part automotive clear like this $25 a can. I've gotten away with regular Krylon clear from Walmart for stuff I don't abuse much.
If you are looking for the best alarm for your motorcylce, Viper has their PowerSport alarm on discount right now on Amazon:
Ourbest Motorcycle Driving Lights, 2inch Spotlight LED Fog Lights for Motorbike ATV Bicycle Off Road Accent Off Road Lighting(10W White) https://www.amazon.com/dp/B00VL4H78W/ref=cm_sw_r_cp_api_glc_fabc_2BRBZ061K8DTWEAHC12Y
MICTUNING Universal Motorcycle Mirrors - 3 Inch Round Folding Bar End Side Mirror Compatible with Honda, Scooter, Suzuki, Yamaha, Kawasaki, Victory and More https://www.amazon.com/dp/B07FCCJR87/ref=cm_sw_r_cp_api_glt_fabc_MVZCF39WQ9H7WQAZQ6MG
KAJIMOTOR Universial Motorcycle 51mm /2'' Slip-On Round Real Carbon Fiber Exhaust Muffler 160mm https://www.amazon.com/dp/B07QYT5RMJ/ref=cm_sw_r_cp_api_glt_fabc_7QB82KKX4BGFZFAS9CBZ?_encoding=UTF8&psc=1
Yep! good move.. Also get something like a alarm and hide it in airbox or some place hard to find just to scare ppl a little bit. If they want your bike they'll get it but having all of this will turn off optimistic crims from taking your bike for a ride or to screw with it.
it’s one I found on Amazon. It’s been excellent! solid, pretty easy to install, and it makes the bike a bit more comfortable over 35mph. The instructions were pretty clear too.
Ive looked at the zoom it's sounds good. But I just like the price of this one. If I'm going to spend that much I'm going to go ahead and get the yoshimura.
https://www.amazon.com/Kemimoto-Honda-MSX125-Exhaust-Baffle/dp/B07PQ55W56/ref=mp_s_a_1_2_sspa?keywords=grom+exhaust&qid=1638413315&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyU09CQ1E1UkZSRFdLJmVuY3J5cHRlZElkPUExMDA5NDc3MjlM...