What are /r/onewheelpint's favorite Products & Services?

From 3.5 billion Reddit comments

http://imgur.com/gallery/oCRIugq -- I have a narrow strip under, then a wider strip. Two layers at the edge, then 1 layer, then nothing. I originally thought I'd use 3 layers but this stuff is pretty thick.

https://www.amazon.com/dp/B00AOH3I26?ref=ppx_pop_mob_ap_share. Looks like I paid $25. I have a ton left. DM me an address and I'll send you some to try...

I usually do about 20-30 miles per day, just wear these one: Converse Men's Rival Shoot for The Moon Sneaker https://www.amazon.com/dp/B07LBHK38N/ref=cm_sw_r_cp_api_glt_fabc_8WQM23PPEVTK5QPEFYC3?_encoding=UTF8&psc=1

-As someone who ones, the flight fins, fender and all. Its nice to have removable fender, however, it is a little foolish to think you can easily and comfortably jump with a 25 pound weight.

-I also have the fangs. V1 I believe, I enjoy incorporating fang drags into my riding style, however, they do NOT save you from nose dives!

-I highly recommend in the any protective covering for the bottom and sides. So yes, on the sidekicks and float plate.

Badgering is good for water damage to bearings. I just plan to get ceramics at the 1k mile mark.

-Footpads, are expensive, here is a cheaper, arguably better alternative: https://www.amazon.com/South-Bay-Board-Co-Surfboard/dp/B088DL3BMR/ref=sr_1_1?dchild=1&keywords=South+Bay+Board+Co.+-+Surfboard+Traction+%26+Stomp+Pads+-+5-Piece+Back+Tail+Set+-+Comfortable+Fingerprint+Textured+Foam+Grip+%26+Long-Lasting+for+Surfboards%2C+Paddleboards+%26+Skimboards&qid=1620235137&s=sporting-goods&sr=1-1

Actually it’s just a white fender with this baseball stitching tape.

Adstape New Baseball Stitches Design Tape Cellophane Adhesive Baseball Tape Funny Home Decor https://www.amazon.com/dp/B01IAODHTS/ref=cm_sw_r_cp_api_glt_fabc_CDFK5YXQ4M4R4SK4WXFW

I strongly recommend these for any floaters out there who regularly expect to take a dive... or even those who don't. They've saved my ass -- literally -- a couple of times since I got them. Much better than the wall of bruises on my left side.

Street light seems to be enough for me. I only added reflective tapes and EL TAPE (search Amazon) to my Pint so I dont get run over. avoid sidewalks at night so you dont get owned by invisible potholes. And stay away from ghetto neighborhoods at night unless you want to get knocked out and get your OW jacked by crackheads.

(Edit) You can also use this for headlight (for your head) and free up your hands.

OV LED 802100 Broadbeam LED Headlamp, Ultra-Low Profile Durable Elastic Headband, Camping, Hunting, Runners, Hiking, Outdoors, Fishing, 210° Illumination, 300 Lumens, 20 Bright LED Lights, 3 AAA Battery Powered, 3 Power Settings https://www.amazon.com/dp/B07GT49F9C/ref=cm_sw_r_cp_api_i_oQYSEbK2YMJSV

That is genius for space efficiency.

I got this big boy which is a bit much for carrying on the onewheel, but serves its purpose and will be great for camping too.

But because of that I can confirm 300w is enough for the ultracharger and it will charge fast.

Here is a link to the lights I purchased. Led Lights

However they didn't last but for about 3 weeks and I had to waterproof the case. If you fall (like I do) then these may not be the best option. Lol

Yes, you’ll have to trim the BMS divider a bit to fit the connectors and will also need to drill a hole to run wire. Also you’ll have to make the hole in the controller bigger to fit the connector in unless you cut the new wire and just buy a connector from amazon.

Haisstronica 120PCS Solder Seal Wire Connectors-Marine Grade Heat Shrink Wire Connectors-Heat Shrink Butt Connectors-Butt Splice Wire Connectors for Stereo,Electrical with Corrosion and Weatherproof https://www.amazon.com/dp/B07C3NBTJ9/ref=cm_sw_r_cp_api_glt_fabc_DV6H6GMW40AAZMTTGH9X

I was able to set the bead on my Burris SS-22 at around 50 psi using a DC-powered pump. I think it'd be worth investing in one, honestly.

I used a regular GoPro mount with the 3M adhesive with the red tape on it. It held up really well until I skidded out in some mud last night and it popped off -- without any damage to the board. I'm just using parts from a GoPro mount kit to mount a Yi 4K Action Camera, which/was is a tidy camera for the price; I've also mounted LED camera lights on it for night riding and it works pretty well. I've also experimented with shooting from a helmet mount, but it's too visually noisy with me looking around, so I prefer the board level.

Watch a couple of videos. The tire comes off pretty easily if you bend it right. Use nylon tire levers. Use a decent quality Torx on the axle bolts - they are really tight.
BullSnot tire lube really is slick. When seating the bead it will likely take more than the max 40psi allowed.