What are
/r/snowboardingnoobs'
favorite Products & Services?
From 3.5 billion Reddit comments
The most popular Products mentioned in /r/snowboardingnoobs:
The most popular Services mentioned in /r/snowboardingnoobs:
The most popular reviews in /r/snowboardingnoobs:
Need a cheaper camera? I have an SJCAM from a couple years ago, different model, but the thing works mint. Maybe you're interested in this. You can even get a wristwatch type control that turns it on/off, takes pictures and video.
https://www.amazon.com/SJCAM-Action-Waterproof-NTK96660-Original/dp/B08CZDL65M/
Tip # 1 buy my snowboarding books, I recommend this one as the one-stop shop for learning how to ride at a high level quickly. https://www.amazon.com/Snowboard-Mastery-Essential-Maintenance-Technique/dp/1650649886
In all seriousness you are doing pretty well, those hardpack snow conditions are somewhat more difficult imo and you handle it well. In ice and compressed snow like that you really have to lean into your front edges (either heel or toe) in order to manuever the board, as opposed to riding in deep powder where you'll need to lean slightly back to stay afloat.
My one recommendation for you is to loosen up a little! You are standing up too tall and your form looks stiff/ridlgid. Bend those knees and stay loose!
I don't know if this was an issue for you, but maybe adjust your stance a little if you're having trouble getting comfortable on the board. A properly adjusted stance will allow you to squat comfortably and move through a range of motions without any pain or discomfort.
Keep shredding cousin! Where is that btw?
I have a patagonia thermal weight 1/4 zip top that I couldn't recommend more. I Aldo have the bottoms but I find them too hot even in my uninsulated bibs. I wear these cheap Amazon leggings for work and snowboarding.
TSLA 1 or 2 Pack Men's Thermal Compression Pants, Athletic Sports Leggings & Running Tights, Wintergear Base Layer Bottoms https://www.amazon.com/dp/B07TTFQ49G/ref=cm_sw_r_apan_glt_i_6XHJ3HVB3N17EF212GGC?psc=1
https://www.amazon.com/KINCO-INTERNATIONAL-901T-Thermal-Premium/dp/B00RW286U0
These 901T- they’re workmans gloves so you can usually find them cheaper at local stores even Walmart has them in some places. The nikwax that comes with them works but I prefer sno seal for water proofing. The gloves also aren’t that bright yellow color they look online especially after you wax them they turn a darker tan color. You can also draw on them in sharpie before you seal them to ‘customize’ them too.
Hestras are nice and everything but these are just as warm and like 1/5 the cost and have the best durability I’ve seen.
Definitely not!
Get a pair of these https://www.amazon.com/Burton-Total-Impact-Short-Black/dp/B010Q1A18I/ref=sr_1_3?dchild=1&keywords=impact%2Bshorts%2Bburton&qid=1608263610&sr=8-3&th=1 or the cheaper off-brand ones. Invest in some decent boots that you try on before buying.
Get a lesson if you can. If not, there are tons of good Youtube channels to help you understand the fundamentals.
Welcome to the community, my guy!
I was wrong it’s fifty bucks
Given you're in Canada, if you can stretch your budget just a little bit, I'd go with the Smith Squad or XL.
sale Squad XL on Canadian Amazon
Regular Squad is at sportchek for $140
Loctite g02 gel, now updated to loctite g02 extreme is THE BEST adhesive for repairing delaminations. Why? Because it's flexible after it cures. I tried marine epoxies multiple times. Cleaned the board, roughed it up, clamped it over a couple nights, still had it come apart again after one or 2 rides, without hitting anything. Once I tried the loctite glue I haven't had to redo it again. I've repaired delams on friend's boards as well with no repeat problems. You can get the stuff on Amazon. I highly recommend you use it. https://www.amazon.com/dp/B00PDAMZ3C/ref=cm_sw_r_cp_apa_fabc_CPVUFbSPM6XP0
What’s your opinion on the Amazon ones?
Edit: Odoland Ski Goggles, OTG and UV400 Protection Snow Sports Snowboard Goggles with Magnetic Interchangeable Lens and Large Spherical Frameless for Men & Women Skiing Skating https://www.amazon.ca/dp/B07RZSGXMS/ref=cm_sw_r_cp_api_fabt1_s5QUFb0478144?_encoding=UTF8&psc=1
This one for example has all those things you listed
There's a quick trick to dial in your board no matter what your individual biomechanics are.
1) Stand on your board (no bindings attached) with snowboard boots and squat down as low as you can comfortably go (feet about shoulder width apart give or take)
2) Wiggle around to make sure everything feels perfect and then mark the angle with a sharpie
3) lock your bindings down in that angle and test again fully strapped in. You might need to change the angle slightly, just due to the limitations of the bindings.
That's all there is to it though. If you do it right you should be fairly centered on the board with maximum flexibility and range of motion.
Nobody except for you can really say if it's correctly set-up. You gotta strap in and feel if it's correct, and if you feel any weird straining in your joints it's not correctly set up.
Source: Instructor experience and the books I wrote/published. This one is a good resource if you want some more help, plus it's free if you have KU.
https://www.amazon.com/How-Snowboard-Have-Fun-Not/dp/1717950108
Yeah I didn't want to spend a whole lot so I just bought some generic padded shorts on Amazon for under $50. For the price they're not bad, just wish the padding on the tailbone area was a bit thicker. This is the one I got.
I'd invest in some quality ankle compression sleeves as a preventative measure and just wear them under your boots. They're tight enough to keep a sprain from happening unless the forces get crazy and help if something goes wrong. These are the ones I have, which I got at a local running store. I'm not sure what lower-quality ones are like, but you certainly don't want ones with velcro and straps to get pinched under your boot. GL!
https://www.amazon.com/Revolution-Exercise-Balance-Training-System/dp/B00KHABW96
This balance board I've found helps a lot with my balance overall, not just for snowboarding. Comes with 3 different bases so you can start with an easy one and work your way up to the roller.
Pretty much anytime I'm watching TV at home I'm using it.
This should be plenty. You dont need that warm of a jacket generally (and I'm in colorado). Just get nice a face covering and some "under gloves" like this Makes a world of difference so your hands don't get cold everytime you need to adjust something. They even got touch screen material so you can text/take pictures with the gloves on.
If you do get them get hestra weather proofing link and follow the instructions. It will definitely help with cheaper boots like these. Though I can’t promise those boots will last long.
A side suggestion: if possible, maybe get some padded pants/shorts (like this)?
My friends and I developed some unconscious apprehension since we landed hard on our behind. One of us had the idea to get those shorts and since then, improved much faster than I am now--less concerned about the pain (it can still hurt, so it doesn't mean you can just YOLO it).
A waxing kit is a good investment. Learn how to wax your own board (it's easy) and after 1-2 seasons it pays for itself (assuming you would be paying someone else to wax your board 3-4 times a year)
Check the length of your screws.
But Amazon, or any Gear shop / hardware store has em
I've got a Smith Maze helmet (plenty of other brands/models have this too though) and it has a zipper pouch that you can put bluetooth headphones into, like these:
Sound quality is nothing to write home about, but it serves the purpose and the battery hasn't died on me once after two seasons of heavy use. Even at their loudest I can still hear around me...though honestly, if someone gets close enough to you that you can hear them, without you seeing them first, you're probably already gonna crash.
I got the following gear here (unfortunately by the time I bought it I was no longer falling down much at all, I wish I got it earlier):
I also got some kneepads, any pair will do.
I don't intend to do skate park stuff, but if I were to, this gear would be immensely helpful to that too. I'm in the states but I expect that available anywhere, in different forms.
You got the right idea on approaching this as a beginner, good luck!
For reference, this is the same one my friend got and fully endorsed. He also found a similar one that has poly wheels but has a lip that he bought recently.
If you end up going with the first one that I got, there is currently a $80 coupon that you can apply for free that you can see right under the price, so effectively the board is under $600.
https://www.amazon.com/dp/B00819EC60/ref=cm_sw_r_apan_i_S1P7S1PNR7X3RVXMR4YY
I have 13 or so boards. Most of which need wall mounted for decoration around the house and garage, but for now they fill this up nicely.
Demon Wedge Snowboard Wall Mounts White Combo pack (2 Pairs-Hangs 2 Snowboards) https://www.amazon.com/dp/B076DPPKLH/ref=cm_sw_r_cp_api_i_MA82J857SZXJ887XD3MS?_encoding=UTF8&psc=1
I use these to mount my boards to the wall, they work really well
Check SNBOCON on Amazon. I got this pullover jacket for about $100[SNBOCON jacket](www.amazon.com/dp/B093RPYHKZ/ref=cm_sw_r_cp_api_glt_i_dl_67BHT3QZ1VE6EKVGERYB?_encoding=UTF8&psc=1) that I love. I usually wear a long sleeve shirt and hoodie underneath. I can def say I’ve never been cold in it (i’ve actually been too warm on more occasions) and it’s waterproof
Amazon has pretty cheap demon tune up kits for ~$80, literally pays for its self. It’s also very satisfying doing it yourself (imo) just watch a YouTube video on how to diy tune up
I bought this one and have used it every season. It does the trick
Take the small, and as someone who has a very small waist compared to the rest of my body, it’s great to use these belts AMAZON they are easy to click on and most bibs have the seams to allow for a belt.
When I first started I was looking for shorts that protected my ass cheeks. Since most affordable shorts mainly protect the tailbone, there are many opportunities where you fall and your ass cheek makes contact with the snow due to the padding pattern of the short. After buying an returning some shorts on Amazon these are good in protecting both my tailbone and my ass cheeks
​
Shinestone Protective Padded Shorts Detachable Pants https://www.amazon.com/dp/B07XL9G5PN/ref=cm\_sw\_r\_cp\_api\_glt\_i\_4XZR4F87J1CFXJSAT2VK
Same boots same problem. My left foot is a half size smaller than my right in those boots. Tried some jbars this weekend helped with the problem, created others but better than they were. Stick them on the gray ankle part of the liner with duct tape and adjust accordingly. https://smile.amazon.com/dp/B01B1ZLINU/ref=cm_sw_r_apan_glt_i_Z9AXMPXQP6RQY7MNT313
Buy yourself a gummy stone. Takes rust right off.
XCMAN Reparatur Tool Grinding Rubber Gummy Abrasive Block Stone Removes Rust and Burrs - Blue 150 Grit Fine https://www.amazon.com/dp/B08RDMJ7PL/ref=cm_sw_r_cp_api_glt_i_GYACJ3PDPJP4H9QF8XQM?_encoding=UTF8&psc=1
I have these ones https://www.amazon.com/BenKen-Protection-Skateboarding-Cycling-Skating/dp/B07L4CJJPP/ref=mp_s_a_1_3
They are a little bulky but you get used to them pretty quickly. Added benefit is a little extra warmth while riding the chair lift.
Soared 3D Protection Hip Butt EVA Paded Short Pants Protective Gear Guard Impact Pad Ski Ice Skating Snowboard Black https://www.amazon.com/dp/B01EUISTG4/ref=cm_sw_r_cp_api_glt_i_8J639DMG01AZ9CAD5ZNM?_encoding=UTF8&psc=1
This, if you’re just thinking about protecting your car while you drive to the resort don’t bother with a wheeled bag, just purchase a cover.
I like this one since it has an opening for the bindings.
There are wrist guards I use for rollerblading…
Triple Eight Wristsaver Wrist Guards for Skateboarding (1 Pair) https://www.amazon.com/dp/B003EB1S1W/ref=cm_sw_r_cp_api_glt_fabc_441JRVFGGTGAJP1YW2DV
They’re pretty good at protecting wrists falling on pavements and can fit in larger gloves. These ones are the best I’ve tried over the years.
It’s still dumb to go snowboarding while healing. There’s the potential of getting permanent injury that will maim you for life. I do sympathize. I had an knee injury recently and had to go through PT to walk again but I push myself to do my exercises properly and ski even when I still feel weakness. That pleasure in the brain from playing in the snow is too intense to ignore. Play safe.
I also just bought this as well though I managed to get it a matching colour to the thermals, I think only black is available now.
You could get him a new set of thermals? I recently bought these and they're very comfy.
Learning to wax your own board is great. Saves money and deepens your understanding of the sport.
- Wax iron
- All purpose wax
- Scraper
- cleaning brush
- P-tex rods
This looks like a solid kit: https://www.amazon.com/RaceWax-Swix-Elite-Ski-Snowboard-Tuning/dp/B08KFQL19R
https://www.amazon.com/TOMSHOO-Protection-Resistance-Lightweight-Protective/dp/B07WRHLBW3/
something like this under your bibs/snow pants while you are learning. It does double duty. Encourages you to fall correctly onto your large surface areas. And it is great insulation between you and the snow. As a taller guy you need to sort out falling technique asap as you have a lot of leverage from your height / limb length.
So I would say overall, yes, it looks like the right size and a pretty general all mountain board, but if I were you I would probably look for something different. That board is probably 10+ years old, I'd imagine in your area of California you could find something newer and better to learn on for a similar price. I found this one in the same area that would be a great option, although a little more expensive: https://offerup.com/item/detail/1029578632/
If you are on a tight budget, this would totally work, it's just not going to ride as well as something a little more modern. I would at least try and talk them down some on this combo.
Also, bindings come in different sizes and fit a specific size range of boots so I would maybe bring your boots and make sure they're going to fit in the bindings.
I personally use these https://www.amazon.ca/gp/product/B07LFWVC1M/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&th=1
they're cheap, but they work well enough for me personally. The shock protection isn't amazing but they saved me for my first few times down the mountain and now I just use them for extra protection if I have a fall. I don't do crazy tricks but depending on what you want to do I recommend buying better quality 100% unless you're at a tight budget
I use these ones, they work great. Just be careful with the sizing chart. I’m normally size L but was an XXL by their sizing.
These are not the super high end bibs you're maybe looking for but I use them and they work really well and are really affordable, they def hit the affordable tag although your size isn't as cheap as mine:
https://www.amazon.com/gp/product/B07L4K2TL9/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I'm 5'10, 155 lbs. so pretty slim but not as skinny as you, I use the medium / 32" inseam but adjust the shoulder straps almost all the way cinched up since I like the bibs to high rise. They have up to 36" inseam in every size, even small, I bet a medium / 36" inseam could work for you. If not you can return them for free if you have Prime. good luck friend
Boots are 7. I don’t know the width. I am wondering about maybe getting this Amazon package for 279 even has burton bindings..
Thank you! I didn’t even think about whether the price was to high. What do you think about this amazon kit. For 279 all new and has burton bindings my get the 150 cm. https://www.amazon.com/Symbolic-Arctic-Snowboard-Bindings-Package/dp/B07Z2XSGWL/ref=mp_s_a_1_13?crid=15N81NQGU48DE&keywords=mens%2Bsnowboard&qid=1637128476&qsid=139-4017234-2421501&s=sports-and-fitness&sprefix=mens%2Bsnowboard%...
this is likely to get shit on, but they work for me
$45, warm, and they keep the snow off me. I'm cruising piste and learning/progressing, not bashing nipple deep pow or bouncing off trees. In a couple of seasons when I'm good I might invest in something better, but these work real nice for a beginner.
Sure
Hop on Amazon and get one of these or something like it: XCMAN Ski Snowboard Side Bevel File Guide Edge Tuner Tool Multi 87 88 89 90 Degrees with a File https://www.amazon.com/dp/B01MU988Z8/ref=cm_sw_r_cp_api_glt_fabc_PPPV1TQQ343M5D8VHDQA?_encoding=UTF8&psc=1
Check out a YouTube tutorial or several to learn how to use it (spoiler alert, it’s disgustingly simple).
I generally do it after a couple days of good riding; the burr forms faster in icy/groomer conditions. Generally when I wax, which is usually every other or so riding day.
If you keep the edge in good condition it will perform much better and longer than of you let it deteriorate
I’ve got these: https://www.amazon.com/Hestra-Mens-Womes-Ski-Gloves/dp/B07GSTQJWQ and I don’t think I’ve had cold fingers since I bought them. They were quite fine in -25C weather even without chemical hand warmers, I’m sure that with hand warmers your eyeballs freeze before your fingers do. Would probably buy another pair if I ever saw them on sale somewhere.
I upgraded last year to the Demon tune & brush kit, but the only things you really need for waxing are an iron, scraper, wax, and maybe a brass brush. For edge maintenance, a diamond stone, gummy stone and a file for sharpening is all you need for regular maintenance.
I'm 43 and just started snowboarding this year so I wanted some protection. I bought these off Amazon and they worked for me the few times I fell.
https://www.amazon.com/gp/product/B07KJH6JK7/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
In regards to the goggles, I’ve seen some affordable North Face ones I’d like to start with at Dick’s Sporting Goods. Any opinions on those? Around the same price as the ones I was going to order on Amazon
ZIONOR Lagopus Ski Snowboard Goggles UV Protection Anti Fog Snow Goggles for Men Women Youth https://www.amazon.com/dp/B077GR5BZX/ref=cm_sw_r_cp_api_glt_fabc_Q2KKRBT7VC1MJ92GF2R0?psc=1
No I only waxed once, I rode the factory wax the first 2 times out. Wanted to see the difference being new to snowsports & also forgot to buy the iron, overall waxing made a big difference, at least the first hot wax since a factory wax isn't a true hot wax, usually buffed on.
I use Hertel Hot Sauce. It's my first board/actual season, I've only been out a total of 5 times so my knowledge is limited.
Rode a rental for one day last season and decided to fully commit. Did a ton of research through off season, and found buying to be cheaper over the long run. Just have to worry about passes / lift tickets and transportation / food. And having consistent gear also aids progression since you are more comfortable / used to it.
How much you wax is more of a personal preference so long as the base doesn't dry out. I'd definitely recommend a hot wax out of the box if you have the time though, it made a big difference in just skating around / getting off lifts / cat tracks and the trails back to lifts. I just keep gliding now.
If you have time get crash pants, your tailbone will thank you. My first day I went without and was really sore after and questioning my decision to try. Day 2 I went with the crash pads and everything was much better. Knowing wipeouts would not hurt as much helped keep it fun.
https://www.amazon.com/Bodyprox-Protective-Snowboard-Protection-Tailbone/dp/B07KJH6JK7/
Stand on your board feet about shoulder width apart, squat down (making sure it is the most comfortable position for you) and notice the angle of your feet. Now put your gear on and set the bindings up in that same position on your board (which is why you stand on your board for step 1).
Double check your work with your boots on. Strap in and squat down again. Make sure there is no strain on your knees or other joints and you have a comfortable range of motion while you are locked in.
Kind of paraphrasing but it's all in my book, which is free if you have KU. Link if interested.
https://www.amazon.com/How-Snowboard-Have-Fun-Not/dp/1717950108
Kinco mittens are super warm and super cheap. They're not the most stylish or technologically advanced, but with some simple waterproofing, they get the job done. I use them as a backup pair for when it's really wet outside.
Quality goggles will be tough to find under $50. If you are looking at premium brands, Dragon and Spy seem to be the least expensive entries into that category.
Eeeeeeeeeeeeehhhhhh yes and no. But let me explain.
I think if you love snowboarding and want to do it frequently it is necessary. However, as an instructor I know the politics/economics of the situation.
The reality is that snowboard instructors are... well let's just say you're getting a complete crapshoot. You could have a great teacher, or you could get my buddy Frank who blazes chron 24/7 and only instructs part-time for a free lift ticket. Oh yeah, and it's probably gonna be their first year teaching. Good luck.
I've been teaching a while and the frugal Jew in me couldnt stand to watch people waste their money anymore.
I wrote a free (if you have KU) book called "How to Snowboard (Have Fun) and NOT DIE" by Kyle Ashton for exactly this reason. It walks you through the same lesson plans you'd expect to see in a private lesson, offers tips, and explains the concepts you'll need to conquer this strange icy landscape we call Ski Resorts.
I think it's a better place to start because you will save money and be better prepared for your in-person lessons (if/when you decide to get them).
That way if you get Frank the Bozo you can tell him to kick rocks and trade up for a better instructor. Or at least get your refund.
Link if interested:
https://www.amazon.com/How-Snowboard-Have-Fun-Not/dp/1717950108
I wear insulated leggings, and insulated cycling pants as a mid layer.
Link to the cycling pants I wear: https://www.amazon.com/dp/B07F2VY58Z/ref=cm_sw_r_u_apa_fabc_Kh92FbPQJRFJB?_encoding=UTF8&psc=1
Lol here we go again. I've posted this reply like 1000 times so I'll be quick.
1) squat down on board in the center and as low as low you can go/hold comfortably. Feet shoulder-width apart.
2) Mark the angle of your feet and install your bindings.
If you have KU I published a snowboard guide that you can read for free. Basically just a guide that saves people money on private lessons, as I used to teach. It's pretty cheap (compared to private lessons) if you dont have KU as well.
https://www.amazon.com/How-Snowboard-Have-Fun-Not/dp/1717950108
Edit: the book I linked has all this information but it goes into greater detail. I recommend it because it will answer all the most FAQ's
Copy/pasting a comment I made a couple of weeks ago:
Doesn't have to be anything fancy. I've got one like this and it works just fine. Make sure you put it through the binding, and that you leave it visible. Snowboard thieves are cowards and opportunists. As soon as they see the lock, they'll go looking for easier targets.
Most likely no. If you have to go with that choice make sure you can buy 3D compatible discs for your bindings first. Something like this.
My heel cup keeps coming lose after a couple runs. What are the name of the screws that keep the heel cup together? Will any screw of the same size work? I have ride bindings.
I was looking at these: https://www.amazon.com/dp/B01C7ON4EA/ref=cm_sw_r_cp_api_fabt1_bmWXFbW3XB0XP
Thanks for the tip, it made me reevaluate the whole problem and realize the source of the issue. I went with the ones below and out of curiosity do you have snowboard boot insoles?
​
https://www.amazon.com/gp/product/B00EZ6YXGW/ref=ox_sc_saved_title_1?smid=ATVPDKIKX0DER&psc=1
Burton do a pair that protect the areas needed without being too bulky and not much more that the shorts you were looking at. See you're also in the UK so look out for black Friday deals on absolutesnow website too.
Ive tried a few of the cheaper ones and they are always too bulky or dont stay in place. I finally bit the bullet and bought this pair that I use for motocross and snowboarding.
Leatt 3DF 5.0 Impact Shorts-XL https://www.amazon.com/dp/B07DY7SJ4K/ref=cm_sw_r_cp_api_fabt1_6hpVFbT7V20VR?_encoding=UTF8&psc=1
the ceramic stone is NOT for deburring your edges. it is for doing a final polishing pass on the edges to make them look a little cleaner after hitting them with the file.
in the video, she is using the ceramic stone as a gummy stone and appears to have confused the two
if you are looking to tune your edges id recommend buying a grey (soft) or red (medium-hard) gummy stone this is the kind of stone she was referring to. these are made to remove the rust and larger burrs from your board. next, you would file your base edge with a file in the guide going from the tip to the tail of the board. if you do not want to sharpen your contact points you can start just inside of the widest part of the tip and end just before the widest part of the tail. once you've filed the edges do a final pass with a ceramic or more commonly a diamond stone.
in my honest opinion, however, this is the one thing I will always pay a shop to do. the professional edging machines in a shop can do a better job in literally 30 seconds than what the average person can do in an hour of meticulous work with far fewer chances of damaging the edge or messing up a bevel
if you really want to do the edges by hand the burton file guide is not a great option. the ceramic stone will wear out faster than a similar diamond stone and takes more passes to polish. with the file guide however please use the file in the guide to assure that you get an even angled edge on the base and side of your edges the only time you shouldn't be using the guide is with a gummy stone or to detune to contact points with a hand file
Bought this cheap one from Amazon and it works for me.
https://www.amazon.com/gp/product/B074DS3L23/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
My buddy teaches snowboarding and he's like 300 lbs. He wrote a book to help others like you gain the confidence and knowledge to shred. It's free if you have Unlimited. Check it out!
https://www.amazon.com/How-Snowboard-Have-Fun-Not/dp/1717950108
He also wrote one called Snowboard Mastery but that one is not free.
Like most say, getting brand new gear would probably cost over or way over 1000$, however if you're looking to save up a buck or two - keep reading.
Get new boots, that's 150 - 250. Classic ones with laces are the cheapest and most durable. You can get even cheaper than that sometimes but you have to know what you are buying (i've got my current Nitro boots for 90 euros because they spent a few seasons in my friends shop). You don't necessarily need a new board, just look for a used soft rocker.
Look for a good brand but several years old, that's the cheapest option. https://www.amazon.com/Rome-Garage-Rocker-Snowboard-Mens/dp/B00N2J3RQU/ref=sr_1_11?ie=UTF8&qid=1502364473&sr=8-11&keywords=rocker+snowboard this for example is a super- cheap option, 150$ for a new board. You can get a good used board for 100$-200$, but then again you have to know what you are buying.
I destroy boards quite often so currently I have 2 Nitro boards, one of them was 100 euros used and the other one was 200 euros new. Of course in this price range usually you won't have a lot of choice.
When it comes to outwear/thermal layers/helmets/googles/gloves/socks - of course pants and jacket come first, as well as helmet and gloves, but then again you can get those cheap on ebay or amazon, just make sure pants and jacket have at least 5 or 8k in breathability and waterproof. Also get a long jacket - you will understand why later.
Are you planning to hire an instructor?
Electric EG2 or EG2.5. They are extra wide so you have a lot more visibility. I've been using them for 9 years and can vouch for their quality and expanded line of sight.
$100 on amazon but you can find them all over the internet - https://www.amazon.com/Electric-EG2-5-Womens-Goggles-Chrome/dp/B082YGGMV6
Here you goooo had to link Amazon since Burton is closed for climate change strike. If these don’t come with a liner you could also buy a liner to add a bit more.
Dude, they make these snap in glasses that changed my life.
I got these and put my prescription in then with my doctor. You can also find sites that will do it for you and send them with your prescription filled already.
Rapid Eyewear Universal SKI and Snowboard Goggles Rx Prescription Adaptor. Optical Insert for Glasses Wearers That Fits Inside Any Brand of Adult Snow Goggles. for Men & Women. Also for Motocross https://www.amazon.com/dp/B078QN6DJ6/ref=cm_sw_r_cp_api_i_Vu3cEbRQMZSQC
Amazon also sells anti fog spray that works pretty well too. Just make sure you’re drying out your goggles and not letting them sit in the goggle bag like my dumbass.
i got these as my first pair, they held up pretty good for my riding and are comfy they are a cheaper pair but for the price i was happy with them, https://www.amazon.com/Arctix-Essential-Insulated-Overalls-Medium/dp/B0032UJ2C2/ref=sr_1_5?dchild=1&keywords=arctix+men+snow+pant&qid=1603204907&sr=8-5
I just did a whole bunch of research into Impact Shorts yesterday and it was more difficult than I imagined.
To save you a bunch of time, just get these azzpadz. Yes they look stupid, but they are far more practical than any of the others and don't have padding in stupid places like on your Quads.
Once the snow season starts you'll be surrounded by like-minded riders, so the good news is you should be able to make friends quickly once you get to the mountain! Riding with others, even if you're just following strangers tracks, is a great way to expedite learning.
And as others has suggested lessons can be beneficial, HOWEVER this is where I really wanted to interject. As a lifelong skier/snowboarder and a ski/snowboard private instructor for many years I have pretty much perfected the process of taking a beginner and priming them for a lifetime of success.
I actually have 3 snowboarding books published for varying levels/ages of rider, one of which I think would be perfect for helping you learn the right technique while avoiding the common mistakes beginners typically make. It's pretty much the same progression you'll see in any private lesson anyways, so if you decide to get lessons as well you'll know exactly what to expect.
Here's the link to the book if you were interested. It's the most comprehensive snowboarding guide I've published and will give you a great head start on the season:
https://www.amazon.com/Snowboard-Mastery-Essential-Maintenance-Technique/dp/1650649886
My other two publications are intended for a younger audience, they have good information but this would be the most help in my opinion. This sub is also a great resource for asking any additional questions you have!
It's on Amazon!
I wish there was a cleaner link I could copy, but that will take you straight to it! If you left me a review (good or bad, helps me improve) I would love you!!
I use a stage horse hair brush; tip to tail on the last pass. It is supposed to structure the base. The brush was cheap on amazon. I can’t say if it does anything but I can say that it looks damn fine after I am done. Here is the brush I use Stage Horse Hair Brush https://www.amazon.ca/dp/B00GSLE2VI/ref=cm_sw_r_cp_api_i_SEVNEbY5ER5KW
I bought this from amazon. They are inexpensive and does not take too much space in the luggage. My heat moldable shoes seem fine after use. I use them in my gloves also.
I bought cheap"hip" pads from amazon:
https://smile.amazon.com/gp/product/B07H3LMYVM/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Seems to do the trick. I mean, the first day hurts, period. I'm older than you by almost 5 years, btw.
For wrist protection, I got Level Fly Mitts. I can't totally say I recommend them. Techincally, yes, I've not broken my wrists. But when you take them on and off, the lining starts to stick, and then you have to pull the lining out to get your hands out of them. Hard to describe, but when this happens, then the protective plastic comes out and you have to guess at how to put it all back in.
I don't think I'd buy the mitts again, but like I said, my wrists are unharmed. Just can't tell if the mitts had anything to do with that.
I need some knee pads myself, but so far have got along ok without them.
Was recently looking for a bag myself and read through the questions on this one and multiple people said they fit two boards with bindings
https://www.amazon.com/dp/B074FBBLXC/ref=cm_sw_r_cp_api_i_kG0QDb9YJQ381
I just picked up some new gear as well. First I bought an Anon Raider helmet and then returned it because it doesn't have adjustable sizes like some of the higher end helmets do and I also didn't like not having a goggle strap clip and the way the helmet aligned with the top of the goggles. I ended up spending the extra money to pickup a Smith helmet that was about $100 and it's amazing.
​
For goggles I got https://www.amazon.com/gp/product/B07G3HZ134/ref=ppx_yo_dt_b_asin_title_o03__o00_s01?ie=UTF8&psc=1 I'm sure they don't have as much visibility as something like the Oakley flight deck goggles but they were extremely affordable and comfortable with good visibility and affordable easy to change lenses.
after a little more research people are saying car polish is ok, still do a test spot and i still recommend meguiar's ultimate polish, and i just remembered they make microfiber hand buffers like this https://www.amazon.com/Microfiber-Buffing-Polishing-Buffer-Polisher/dp/B01FOQJNHA use one side to polish and the other to wipe clean, and then wax with a spray wax such as meguiar's quick wax, and then wipe with a microfiber towel (or a corner of that buffing wheel you kept clean) and just a heads up scratches are gonna happen, so don't get too caught up in it and remember to have fun
Bought these on Amazon
https://www.amazon.com/gp/product/B0756DDVJ5/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
There are more expensive ones but these work just fine to protect my tail bone. Keeps your ass warmer too lol.
I was in your shoes at the beginning of 2017! Had my first snowboarding weekend last week and it was a blast! Few things I learned after my first weekend...
For about a month before I went I did this routine 3 times a week in addition to my normal gym routine. You mentioned you are already in decent shape and hit the gym a lot which will definitely help you, but focusing on these routines will help you for the snowboarding specific muscle groups you'll be using if you aren't already.
I definitely recommend as much protection gear as you can get. No matter which way you cut it, you will fall a lot. Having wrist guards, a helmet, knee pads, elbow pads, and crash pants made those falls much less painful. It also has the added benefit of putting you at ease while getting your bearings. I picked up most of my stuff on amazon and/or walmart. I like these crash pants. Nothing special but puts some padding wear it counts.
I definitely will echo the benefit of a lesson. On my second day of riding I met some kids that were first timers and had no idea what they were doing. Didn't look like they had a good time at all. With my lesson I was confident and knew what I was doing enough so I could have a much better time. Have fun!
I really like the idea of using sticky Velcro for this. The adhesive on it is really strong and you could swap out your hood ornaments if you ever get bored of the ducky. You can also soak it in something like goo gone if you wanted to remove it. industrial strength Velcro
I bought one of these faux pros after looking at footage online. its a solid under $100 camera!
How "cheap" are you talking?
There are $15 snow goggles on Amazon, but without knowing your budget, it's hard to give advice.
Let me know your budget and I can help you find something.