Before anyone asks, that Throw lever is actually a breakaway coaster:
https://www.amazon.com/gp/product/B009SPDU3C
​
I believe it won't work on a scope if it has a raised section. It has to be flat around.
​
Also, nice shooting :)
I had a holster and some mag holders, so I went with an inexpensive Black Scorpion 2 piece. Very satisfied with it for now.
Hi all, this is slightly off topic, considering OP is trying to layout an already owned case, but I wanted to throw this out there, in case anyone was looking for a case, or just wanted something purpose built. About 5 months ago, I picked up this case from Amazon Case Club Pre-Made Waterproof 3... https://www.amazon.com/dp/B06XMYQDPL?ref=ppx_pop_mob_ap_share
Let me tell ya, this thing is awesome! Fits my AR, Franchi affinity, and my 320 X5 (that one needed a little love from a razor blade) perfectly. Keeps everything nice and organized and even has a little extra room for random storage. Couldn't beat the price either.
I made the chest plate out of a sheet of .060 kydex
the backers are made from .050 aluminum
the clips are from amazon you will need two packages
the webbing is 1.5" nylon and came from a local hardware store I belive I used #8-32 nuts and bolts but they could be #6-32
I have a similar problem. I use this fiber optic sight, which isn't visible through my left eye when the shotgun is properly shouldered. I like the dual color one, especially for longer range slug targets. Aligning the red dot in the center of the green circle acts almost like aligning a front and rear sight for me.
Yeah don't buy a readymade "3 gun cart". DIY it.
I use these and they work fine for me.
https://www.amazon.com/Dynamics-LLC-Johnny-Clip-2x4/dp/B01HOPBR8C
I also use a cheap double mag holder for pistol mags and have no had any issues thus far. I do not have an AR mag pouch and have stuck an extra mag or two in my back pockets for any stages that require a reload. My inside/outside belt system is the MidwayUSA branded one and got it for like $25 and it also works well for my needs. My equipment has not been a limiting factor, and I actually do reasonably well in my class with it.
TL, DR; 3 gun is expensive and you don't need the Gucci gear to get started, have fun, learn, and even be competitive.
Perhaps you could add this retention hood to a holster you have or a cheaper kydex body that's easier to find than a full built holster.
I folded my own and put this on.
lol my wife got a package of random stickers and they happened to be in there. but i found this https://www.amazon.com/Animal-Stickers-Hydroflasks-Bottles-Pembroke/dp/B08BLFZ2V9/ref=sr_1_5?dchild=1&keywords=corgi+stickers&qid=1604016685&sr=8-5
I picked up a Mac Sports heavy duty collapsible wagon.
https://www.amazon.com/Mac-Sports-Heavy-Duty-Collapsible/dp/B07P6P64SW
I added a couple of those ATV mounts others have mentioned, also from Amazon.
I did a shotgun-only match with it a few weeks ago. Keep in mind that the wagon doesn't fold where I mounted them on either side of the handle. Im going to have to come up with a quick release mount. Otherwise I am happy with it. Plenty of room for my range bag, a small cooler, water, and the big wheels didn't have trouble in the muddy, rocky walks between stages.
I wanted something a bit more versatile than a jogger so I can take it fishing, to the park with the family, etc. After my son is older I might convert his jogger to a gun cart, but that won't be for a few years.
I just use a cheap sleeve (just an example) for the shotgun. I wasn't going to spend $100 on a case. Pistol goes in the range bag, rifle I use a small soft case.
I know I'm resurrecting this thread, but thought this might be of use. I have it, and it's amazing at holding all of my stuff.
Case Club Pre-Made Waterproof 3... https://www.amazon.com/dp/B06XMYQDPL?ref=ppx_pop_mob_ap_share
For cheap, it's hard to beat the IPSC Shot Timer app. Depending on your phone's specs, it may or may not be very reliable, but it's worked for me as a short-term stand-in for a proper shot timer.
I don't have a cart yet, but when I do finally get one, I'm attaching this umbrella to it: https://www.amazon.com/dp/B07BHJH6D8/?coliid=I34VQUJRMNTN8Y&colid=2FBMO38QPZQXW&psc=0&ref_=lv_ov_lig_dp_it
I shot a 95+ degree and humid match recently at a range with zero shade. Just beating sun all day long. I was dragging hard at the end of the day and some shade would have helped immeasurably.
ok so quad load it is! i dont have issues shooting a desert eagle, so i think im in the 'large hands' category.
what caddy do you have for 10s? do you 2up load? i think would just get this guy - https://www.amazon.com/12S4-SPORT-Shell-Holder-Black/dp/B01EVQ17LO/ref=pd_lpo_vtph_200_tr_t_2?_encoding=UTF8&psc=1&refRID=QEHXND95Q9T9EYEE6PRC
ok cool. ill look at the safariland when i get home. its a bit confusing. there is the OWB from Bladetech I suppose its a lvl 2 ,but cant really tell and they dont say in the description. i did call and ask about it and they said that they hadn't gotten any reports of it falling out.
the KT mechs look nice as well, but seem to be the same category of "two screws for retention" type of thing.
Belt: https://www.amazon.com/gp/product/B00RYMDLK8/ref=oh_aui_detailpage_o04_s01?ie=UTF8&psc=1
AR Mag holder: https://www.amazon.com/gp/product/B01FJAMCL0/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
$35 total. I used that belt, mag holder, and a pistol mag holder for my first 3 gun match back in September. They worked well. Nice a cheap, and you can decide later what you do / do not like and what different things you may want without being too invested.
Yeah it seemed like a pretty good one for the price. And sorry about that, I fixed it. Here is the mag holders though, haha. I'm at work so I get distracted easily
That's what I'm talking about. I think my range bag is bigger than yours. This is what I use
Did you have a plan or pattern you used?
Where did you get the materials?
Do you have more pics, at different angles or without the bag/guns on it?
I've got two sets of mounts coming, they're offset so the guns will actually sit to the side of the stroller and each end of the gun will sit in one of the racks.
These are the mounts:
https://www.amazon.com/Kolpin-21500-Rhino-Grip-Single/dp/B001Q4QO2C
The cart will live in my garage so fitting through doors isn't a deal breaker. The folding part is though, so good looking out there.
Yeah, that's it.
I'm not paying $30 for a 3D printed part made in some shitty plastic that's likely to break. I'd rather use these, or just print my own.