What are
/r/4thGen4Runner's
favorite Products & Services?
From 3.5 billion Reddit comments
The most popular Products mentioned in /r/4thGen4Runner:
The most popular reviews in /r/4thGen4Runner:
https://www.amazon.com/gp/product/B088QJBQHB/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
​
I have had these installed for six months, super happy with them. it really modernizes the feel of the interior and is perfect for camping
I’d also invest in a Apple CarPlay or Android Auto head unit. Absolutely worth it. And you can also change out the head lights and interior light for pretty cheap.
BRISHINE White LED Interior Light... https://www.amazon.com/dp/B088QJBQHB?ref=ppx_pop_mob_ap_share
SEALIGHT Scoparc S1 9005/HB3... https://www.amazon.com/dp/B07JNV9TKM?ref=ppx_pop_mob_ap_share
Here you go! EAG Replacement Upper ABS Grille Front Grill with Amber LED Lights - Charcoal Gray Fit for 12-15 Tacoma https://www.amazon.com/dp/B07FDT4DTM/ref=cm_sw_r_cp_api_glt_fabc_5MYN5JM9X3SYCWB0VX3N?_encoding=UTF8&psc=1
Keep in mind, some are polarity sensitive. So if it doesn't work one way, don't be immediately bummed, just flip it around and re-install, then it should work.
Sorta had a minor issue with the domes as it only has lights on one side, so you have to make sure it's facing right way, and prongs are tight enough, so it doesn't shift when putting the cover back on (which it did to me a few times. Lol)
This is the one I ordered and I love it! Feels very heavy-duty and has held up great so far. It's waterproof, has grippy backing so it doesn't budge, and has straps to really keep it in place. I have a 2006 SR5 and it fits perfectly.
Here's the amazon link but if that doesn't work search "jaybally dog seat car cover"
Thanks! XPLORE Offroad - 4Runner | Precut American Flag Window Decals | Matte Black American Vinyl for Rear Side Windows | Both Sides | 4th Gen | 2003-2009 https://www.amazon.com/dp/B07M65GYJN/ref=cm_sw_r_cp_api_glt_fabc_W44GCSQEXHCHJR69SDZB
SPEC-D TUNING - 2LHP-4RUN03G-TM Spec-D Tuning Halo Led Glossy Black Projector Headlights for 2003-2005 Toyota 4Runner Head Light Assembly Left + Right Pair Gray https://www.amazon.com/dp/B0751JQP4N/ref=cm_sw_r_cp_api_glt_fabc_Z7IeGbZDWSKTW
It's cheap and feels cheap, but it looks good enough. There are plenty of more expensive options, but my dash was so bad I just went with the cheapest band-aid I could find and honestly I'm pleased so far.
I mounted a RAM ball to the plastic below the hazard lights button. Used a small piece of aluminum behind the panel so it didn't break the plastic. Then stuck a small RAM double socket arm and a RAM QuickGRIP XL on it. My wife uses that one.
I also mounted a RAM angled bolt head adapter where one of the A-Pillar handles are on the driver's side. I use a Quad Lock so I mounted a Quad Lock wireless head up there (on a RAM small double socket arm), or sometimes I swap it out for a RAM QuickGRIP XL (if I'm running my offline nav phone instead of my cell).
I just ordered this
Reviews seemed positive from 4runner applications
I just got some Amazon lights. Bright and work great. Plug n play. This pack comes with both high and low beams
Nilight 9005 9006 LED Headlight... https://www.amazon.com/dp/B08P31FXQY?ref=ppx_pop_mob_ap_share
Thanks for the help everyone! Can anyone confirm that this is the correct gasket for that location?
https://www.amazon.com/Fel-Pro-61106-Exhaust-Flange-Gasket/dp/B000C2AEES
The Toyota parts list doesn’t have a picture that I can find.
https://www.amazon.ca/gp/product/B01LXQZWVL/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1 I used these. Worked great.
Depends on which one specifically you mean . There’s a few different bulbs back there. This should get you started
This isn't absolutely perfect, I occasionally had to reseat it, but does fit the button blanks near the armrest/center console.
https://www.amazon.com/gp/product/B07425JMN9
I've since switched to a wireless Android Auto adapter tucked away in the glovebox, and a usb charger installed in the blank instead.
I just did my cv's I didn't get the HD but here is a link to the cardone HD $85 each. https://smile.amazon.com/Cardone-Select-66-5235HD-Constant-Velocity/dp/B01BDY89SQ/ref=sr\_1\_1?content-id=amzn1.sym.d3f43d11-fd5a-4179-8b1e-1a03d11e07f4%3Aamzn1.sym.d3f43d11-fd5a-4179-8b1e-1a03d11e07f4&keywords=cv+axle&pd\_rd\_r=4228245f-a...
I bought this phone mount on Amazon a few months back and can’t say enough good things about it. Have it hooked up in the center left vent and I’ve never had an issue with the mount or phone bouncing around.
Obviously this will only work with MagSafe phones like the iPhone 12/13/14. But they also come with magnets that you could apply to another phone type as well.
https://www.amazon.com/gp/product/B00OPBDMT6
The ones I bought were AKKON, but I'm pretty sure it's the same generic set thats sold by many vendors.
I bought an add-a-fuse mini 25 amp, ran the wires through the firewall. You'll have to cut into a rubber nipple and feed it through with a wire coat hanger or fish tape. The add-a-fuse plugs into your fuse box by the kick panel. Ground wire goes to anywhere that's bare metal.
Just did a replacement with one of these. Needed adapting for the terminals and the screw holes are slightly different. Nothing majorly complex.
Hifonics BXS8D4 Brutus Shallow... https://www.amazon.com/dp/B079CHVTPX?ref=ppx_pop_mob_ap_share
Hey there.
I peeked in your history to see what gen you had -- gorgeous 1st gen btw but I assume you're talking 4th gen.
I've had these AVS 94924 model on my 4th gen for a couple years and I'm quite pleased with them.
The plastic has remained supple and flexible, no fading or surface ablation that I can see. The adhesive tape mine came with has held firm through 100°F summer heat and -31°F winter cold snaps, and a sudden gusting rainstorm that was rocking my 4Runner so hard I thought my truck was going to flip.
The finish is a semi-gloss black but they're easily sanded (600 grit wet sand) and repainted to match your existing trim.
My only complaint is the fit isn't 100% perfect. There is a tiny gap where the front end of the two front shades meets the mirror. No matter how I adjusted and repositioned them, the gap remained. But it's a small gap -- less that a half inch -- so I stuffed a bit of black window glazing putty in there and it disappeared.
Installation tip: if you haven't installed these kind of window shades it can be a daunting trying to get them positioned correctly before committing.
My suggestion to use masking tape to stick them on your truck in order to get them positioned just right. Then peel off the tape backing and stick 'em on. I'm pretty sure the kit comes with a little iso alcohol wipe, but if not make sure your areas of attachment are perfectly clean and wiped down with iso or similar cleaner. The adhesive tape is the real deal: if you place the shades incorrectly you've got literally a few seconds to try to peel it off and reposition.
If you need to remove the shades later on, a heat gun and slow sustained tugging will peel them off.
Good luck!
I got the pioneer 8” as well (PIONEER 8" Slim 700W 2 OHM SUBWOOFER https://www.amazon.com/dp/B0811X5S9J?ref=ppx_pop_mob_ap_share) I don’t remember the exact video but there was a youtube video with a good how to. I had to get some extra connectors as well but i don’t remember the part name/number. If i remember right i had to pop off the interior panel but i don’t remember it being too hard.
I also replaced the blown out JBL sub with an MB Quart. I used a utility knife to cut the screen. Had to heat the blade up with a lighter to get through it. Super glued it back after replacing the sub.
MB Quart DS1-204 Discus Shallow... https://www.amazon.com/dp/B010X424Q0?ref=ppx_pop_mob_ap_share
AirTechnik CF9846A Premium PM2.5... https://www.amazon.com/dp/B0828BLHJL?ref=ppx_pop_mob_ap_share
I used the more expensive fram one with the arm & hammer last time and didn’t notice any difference so I went back to the $8 one
FRAM Fresh Breeze Cabin Air... https://www.amazon.com/dp/B0010DZZVK?ref=ppx_pop_mob_ap_share
get a block tester I recently bought a 06 with bad head gasket now ill never by another used car without using one simple to use and will save you from removing your own foot from your rectum
​
HERE are the buttons I used. They're great, full aluminum construction, waterproof, and has a satisfying push to them. The third button is wired to the hatch release so that I can open the trunk from the inside if I'm sleeping in there.
AUTOLA Fender Flare Clip Kit 75495-35010 75397-35010 for Toyota 4Runner Tacoma RAV4 FJ Cruiser, Replacement Parts for Exterior Door Trim Panel Rear Plastic Fender Rocker Panels https://www.amazon.com/dp/B07PYN8BGX/ref=cm_sw_r_apan_i_5995APC5PEC0V9ZEGH91
There's probably an easier way than drilling your own holes so if I ever find the perfect 90° mounting bracket that would be awesome and I'll go through with it, I just don't feel like drilling my own holes.
Meerkatt (Pack of 10) 3/4 Inch Mini Round White LED Side Marker Sealed Small Flush Mount Clearance Lamp Indicator Light Waterproof Tow Truck Caravan Bus Van Boat Ship Lorry ATV 12V DC Universal https://www.amazon.com/dp/B07DKXMTFF/ref=cm_sw_r_apan_i_EGBVADS21691Z9NZN72J?_encoding=UTF8&psc=1
These are the lights I ordered, seems like they'd be perfect for the job and the price is right.
RockTrix RT107 17 inch Wheel Compatible with 01-21 Toyota Tacoma 6x5.5" (6x139.7) Bolt Pattern, 17x9 (-12mm Offset), 106.1mm Bore, Matte Bronze, Also fits 02-21 4Runner, FJ Cruiser, 99-06 Tundra - 1pc https://www.amazon.com/dp/B07ZTV9PM2/ref=cm_sw_r_cp_api_i_H915704YAMTJ33ETW3NB
Tire size is 285/ 70 17
The price of wheels have increased since I bought them, still a good deal though
Willpo CertiPUR-US Memory Foam Camping Mattress [Single:75"x30"x2.75" Twin 75"x38"x2.75"] Portable Sleeping Pad Floor Guest Bed Lightweight Outdoor Tent Mattress Removable Waterproof Cover Travel Bag https://www.amazon.com/dp/B07D11B2K2/ref=cm_sw_r_cp_api_i_9BMZ8XY4WTY438WFBFDK?_encoding=UTF8&psc=1
I use a VIOFO A119 V3 and I love it. It has fantastic video quality for the price.
If you want to catch door dings, you may want to look for a multiple camera system (front, back and inside). Most affordable cameras are single camera setups and don't show what's happening behind or next to you. Just be prepared to spend at least $200+ for one of those.
2018 J+ 9006 Low Beam headlamp & Fog Driving Light, Gold White Dual Color LED with 8000lm Souel LED Chips,LED Headlight Conversion Kit Low Beam & Fog Light,3000K/6500K,9006 HB4 9006XS https://smile.amazon.com/dp/B07G756BHM/ref=cm_sw_r_cp_api_i_JPEGXKNMX2XXVRF38GDC?_encoding=UTF8&psc=1
so this fits the blank switches perfectly. I put this in the center console blank (between heated seats) to use for carplay/android auto with my pioneer deck in the 2007.
Car USB Power Socket with Audio Port for Toyota VIGO, AWADUO USB Car Power Port Socket Adapter with Audio USB Socket for HTC/BlackBerry/Samsung/Huawei, or Other USB Devices https://www.amazon.com/dp/B07F33ZBG4/ref=cm_sw_r_apan_i_GFFQBT5TJNS0Y52SRBR7
Replacement for Tacoma Tundra 4Runner Rav4 Camry Corolla Highlander Steering Wheel Emblem Overlay Badge Blackout Black Steering Wheel Emblem Overlay https://www.amazon.com/dp/B09SYQRDPZ/ref=cm_sw_r_cp_api_i_QR8RP6MD64DDVYBCYYKF?_encoding=UTF8&psc=1
WLJH 10x Pink T4.2 Neo Wedge 3030 Chipest 10mm Base Led Car Instrument Cluster Led Bulb Dashboard Gauge Bulb HVAC AC Heater Climate Controls Lamps Radio Switch Indication Interior Light Replacement https://www.amazon.com/dp/B07J51PXSC/ref=cm_sw_r_cp_api_i_HW4DK1V5491CQKFERRTA?_encoding=UTF8&psc=1
this is cheaper cant guarantee it will work but it is what i would try https://smile.amazon.com/XEWEA-Extractor-Extraction-Remover-Rounded-Off/dp/B0915CZ4SW/ref=sr_1_3?crid=1QNSVFCBGI4O3&keywords=rounded%2Bbolt%2Bremover%2B24mm&qid=1647300931&sprefix=rounded%2Bbolt%2Bremover%2B24mm%2Caps%2C254&sr=8-3&th=1 as for finding a replacement i would go to my local pick a part and just start taking off fill plugs until i found a match
mine is wired to the back of my Kenwood 9903 head unit for Android Auto. But if you just want to use them for charging, you could easily connect some 12v-to-USB adapters to the existing wires for the cigarette lighter.
Here's a link for them. Since they are for an 06 and up I had to wire the small park light that is in the corner of the 03 headlights and that's what's powering the bar. And had to change out the sockets and wire new one for the low beams since they changed the fitment of the socket for 06 and up, but the high beam didn't require any change. Hopefully I didn't butcher that explanation.
For 2006 2007 2008 2009 Toyota... https://www.amazon.com/dp/B07Y5QDM3S?ref=ppx_pop_mob_ap_share
AUXITO 9005 LED Headlight Bulbs 12000LM Per Set 6500K Xenon White Mini Size HB3 Wireless Headlight Bulb, Pack of 2 https://www.amazon.com/dp/B07WMG43QJ/ref=cm_sw_r_cp_api_glt_i_8X5N6ED1YQPGCTJHQ4DE?_encoding=UTF8&psc=1
ACANII - For Black 2003 2004 2005 Toyota 4Runner 4-Runner Headlights Headlamps Driver + Passenger Side https://www.amazon.com/dp/B07FNYBNTV/ref=cm_sw_r_cp_api_glt_i_CJ0YJPTAM6WTZ20V7RPN?_encoding=UTF8&psc=1
don't waste money on CBI or Cali LED. this offers the same at half the price. I run them on my wheeler with baja sports and they've been great for 20k miles.
I use an earlier version of this; iOttie Wireless Car Charger Easy One Touch Wireless 2 Qi Charging Dashboard Phone Mount for iPhone, Samsung Galaxy, Huawei, LG, Smartphones https://www.amazon.com/dp/B07X4YDKTF/ref=cm_sw_r_cp_api_glt_i_KV61ST2RDKNX995VW0MJ?psc=1
Mounted on my dash, below my rear-view mirror.
I use it regardless of navigation or not, as it charges my phone at the same time.
Would these work they are a LED solution DODOFUN White T5 37 74 LED Bulb with Twist Lock Socket PC74 PC37 Dashboard Instrument Panel Gauge Cluster Light Pack of 10 https://www.amazon.com/dp/B07L8DMHCD/ref=cm_sw_r_cp_api_glt_i_3R3G2KZF34SQ5CMMFRCS?_encoding=UTF8&psc=1
the 3M kit will produce similar and great results for $23 https://www.amazon.com/gp/product/B001AIZ5HY?th=1
You will need a drill for this.
I've done this on 3 different 4runners with spectacular results. I recommend coating with UV protectant afterwards to delay the yellowing of the lens. https://www.amazon.com/gp/product/B01KIVYE6G
YETI X WIPE : Add-on Wiper Arm Pressure Spring Set (Pack of 2 Black) https://www.amazon.com/dp/B00PB0YCDU/ref=cm_sw_r_cp_api_glt_i_QQF64TNZVP9VBB37ZQEW?_encoding=UTF8&psc=1
This stupid $10 spring works wonders and is money well spent
I bought rotors and calipers from Power Stop. They seem to be doing just fine so far, wish I’d done calipers too though.
Power Stop K138 Front and Rear Z23 Carbon Fiber Brake Pads with Drilled & Slotted Brake Rotors Kit https://www.amazon.com/dp/B005FKS4J4/ref=cm_sw_r_cp_api_glt_i_MZW86RCNWAZFF2JH2Z19?_encoding=UTF8&psc=1
No clue if there's a place to plug-and-play on the older models. But there is nothing against the rules about buying your own off brand mirror and wiring it in yourself.
Something like this: Gentex 50-GENK2AM Auto-Dimming Rear View Mirror https://www.amazon.com/dp/B00PHLM3EI/ref=cm_sw_r_cp_apan_glt_i_JJJ67SAWSP8PDGC5MGFK
I have two 75# Dobermans and this is what I got for my 06’. It’s simple and easy to put together but to put it up in the car, DEFINITELY recommend two people. Just really annoying doing it by yourself. Our dogs don’t jump on it but if your dogs a jumper and paws at things, it might not be enough. If not, then this will do fine!
Nope this helps!
C CASIMR Heavy-Duty Dog Barrier, Adjustable to Fit Cars, SUVs, and Vehicles, Smooth Designed Pet Wire Barriers, Black https://www.amazon.com/dp/B07SG7HRFC/ref=cm_sw_r_cp_api_glt_fabc_42T7P798QDKMX4ZJZA81?_encoding=UTF8&psc=1
Yeah I used an aftermarket switch, I just tapped into the OEM switch green and green/white for the switch to dim with the dash lights.
The 4wd wire you tap into is RED with a BLUE stripe.
Switch - CH4X4 Push Switch for Toyota - VSC Symbol - Amber Led https://www.amazon.com/dp/B01MSJ1Q8F/ref=cm_sw_r_apan_glt_fabc_EQ3EA6GT428M366V8V7D?_encoding=UTF8&psc=1
Unfortunately no, I went with some aftermarket ones from CarID. Those clips behind the liner are a pain to get out! I didn't break any, but there were plenty missing. I went with these clips on Amazon. Long-term plan is to re-coat the inner fender past the liner with some 3M rubberized undercoating, then it should be looking brand new in the wheel wells.
Bummer! https://www.amazon.com/Toyota-Genuine-63491-35021-Roof-Cover/dp/B00FZGT938 or search "4Runner 63491-35021" on ebay
Dc converter
Extractme DC Converter 12V to 5V 3A 15W DC USB Converter Buck Module, DC to DC Regulator Car Power Converter with 2 USB Output Power Adapter https://www.amazon.com/dp/B081NCXB2M/ref=cm_sw_r_cp_api_glt_fabc_KPDS2QC2A9ME5E8QGV7N?_encoding=UTF8&psc=1
So there’s some square, double usb thing I picked up from Amazon that fits the cigarette lighter like a glove with really minimal fabrication, like it was meant to be there. You would have to buy a dc converter to power the usbs, but both items combined are like $25.
BATIGE Dual Ports Square USB 3.0 Panel Flush Mount Extension Cable with Buckle for Car Truck Boat Motorcycle Dashboard-3ft https://www.amazon.com/dp/B078LXX3MD/ref=cm_sw_r_cp_api_glt_fabc_8PNX47T4A60XXEN882TZ?_encoding=UTF8&psc=1
Are you talking off road or on road? Blinding oncoming traffic with a lightbar is going to get you pulled over pretty quick and put other drivers and yourself at risk in the meantime. In that case I'd forget about a lightbar and instead look at options to upgrade your current fogs -- amber lenses or lights if you're looking for real fog light utility.
These are an interesting fog light option with two different amber modes, as well as a flashing hazard function which could be useful if you get caught in some dense fog/snow and are just trying to be seen while creeping through it.
But if you're talking off road, or at least lightly-travelled rural roads then a 32" light bar fits very nicely in the bottom grill -- and in fact the bottom grill just pops right out in the '07. No cutting and easy to reverse if you change your mind.
Link to the lower grill 32" light bar mod (and other mods) to get you started.
I don’t suggest the cube ones I got.
The light bar works great.
Nilight - 18016C-A LED Light Bar 22Inch 270W Triple Row 27000LM Flood Spot Combo Beam Led Bar Driving Lights Boat Lights Super Bright Led Off Road Lights for Trucks,2 Years Warranty https://www.amazon.com/dp/B071Z6MVFL/ref=cm_sw_r_awdo_navT_a_62V50EQP52B7B0H815V1
I got em on Amazon!
Daystar KT09117BK front Leveling Kit https://www.amazon.com/dp/B001GETNZW/ref=cm_sw_r_cp_api_glt_fabc_J6RWQ1YXZ39X176JX2PK?_encoding=UTF8&psc=1
Moog 81045 Coil Spring Set https://www.amazon.com/dp/B003YMHDWO/ref=cm_sw_r_cp_api_glt_fabc_C2WCGZ1AX8ZAHTBYHMMQ?_encoding=UTF8&psc=1
https://www.amazon.co.jp/dp/B08CDXM7T6?ref=myi_title_dp#
This is what I was thinking of doing, but isn't in stock, and the price is quite high to an unknown unit. It would look completely stock, fills the "wide" double DIN opening, and has a volume knob.
You can program new fobs yourself. I did it since mine only came with one key and fob and then the key itself has to be programmed and made by a key company or locksmith. I bought the fobs on Amazon and YouTube the video. It's really easy.
I've had these in for about 3 years now and they are great: https://www.amazon.com/dp/B01KHUYQ34/ref=cm_sw_r_apan_glt_fabc_W5A3ZFTYBTTM16S8ARPR?_encoding=UTF8&psc=1
They are super bright though so make sure to adjust your housings down or you will blind other drivers.
Thanks man! Mostly stock, but maybe suspension and wheels next year. Headlights: For 2006 2007 2008 2009 Toyota 4Runner LED DRL Projector Black Headlights Lamps Pair https://www.amazon.com/dp/B07Y5QDM3S/ref=cm_sw_r_cp_api_glt_fabc_A0T0Z2MNBN1P91HX8C1F?_encoding=UTF8&psc=1
The UCA's are stock for now but I'm already planning to replace them. Here is the antenna mount: https://www.amazon.com/Nagoya-RB-700N-Universal-Hatchbacks-Adjustable/dp/B07CQQJ7CN/ref=sr_1_3?crid=2DR97C98T1E5N&dchild=1&keywords=nmo+antenna+mount&qid=1632245267&sprefix=NMO+%2Caps%2C231&sr=8-3
Don't tell anyone, but I'm not big on OEM for the most part. So I replaced the hub assembly with this from Detroit Axle. Tons of awesome reviews. Comes greased. Piece of cake to install.
If I would have started with the Milwaukee impact, it would have probably taken me about 2 hours for both sides. Ended up around 5 hours with the trips to Lowes/Home Depot.
The seats in my 09 Sport are just as bad. They're fine for short drives, but multi-hour road trips are grueling. I searched high and low for anything I could swap in without major modifications, but I found nothing.
I settled on this: https://www.amazon.com/gp/product/B07MGRDWB5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
It works great on long trips, no more sciatica pain at all, but it's a bit too bulky to leave in all the time. If you ever find seats that work, let me know!
^^^^This right here. Continuing to drive with blinking light could damage your engine and exhaust system requiring even more expensive repairs. It is highly doubtful that this would be caused by a gas cap. You can buy an inexpensive diagnostic code reader and retrieve the codes yourself. I did this using this OBCD meter here: https://www.amazon.com/gp/product/B071FSNL73/ref=ppx\_yo\_dt\_b\_asin\_title\_o01\_s00?ie=UTF8&psc=1
SEALIGHT 9005/HB3 High Beam... https://www.amazon.com/dp/B07K438ZQD?ref=ppx_pop_mob_ap_share
SEALIGHT 9006 HB4 LED Fog Light... https://www.amazon.com/dp/B08B876NTY?ref=ppx_pop_mob_ap_share
These are ones I got. They were easy to install and look really good. These two sets match perfectly.
Yeah the bull bar thus far has been great. Took about 2 hours to on which wasn’t bad and is very sturdy. I highly recommend it for the value your getting, including the rust resistant finish that is a plus. I also picked up the light bar from Nilight on Amazon for about $35, and has work great, super bright and easy to install.
Tyger Auto TG-GD6T60458 Front... https://www.amazon.com/dp/B077GHVZ8L?ref=ppx_pop_mob_ap_share
Nilight - ZH006 LED Light Bar 20... https://www.amazon.com/dp/B06XQGQTXQ?ref=ppx_pop_mob_ap_share
I would have to go look at what I tapped into. The tap I used was similar to this. I am planning on building a relay-activated fuse block for some aux electrical needs in the future, but the low-amp draw that I have now is being served just fine.
Bilstein 5100 Series Shock Kit for Toyota 4Runner 4WD 2003-09 - Includes Front Ride Height Adjustable Shocks # 24-239370 & Rear Shocks # 33-187174Excludes adjustable (X-REAS) suspension https://www.amazon.com/dp/B00T8RZKR4/ref=cm_sw_r_cp_api_glt_fabc_CNW20GFJ1W0C6VSH0DKY?_encoding=UTF8&psc=1
They were a bit cheaper when I purchased last year, but this is the same seller. Not sure if they sell just front
Did you get the right cas cap? 4runners came with 2 types of caps. There have been cases of dealers selling the wrong gas cap.
There's a screw cap with traditional threads that screw into the threaded fill hole.
I don't know how to describe the other, but it looks like this... and it's the one I got.
Here are some black caps from Amazon.
So I got the OEM wiper (Genuine Toyota 85242-35021 Wiper... https://www.amazon.com/dp/B007OW66BE?ref=ppx_pop_mob_ap_share).
Before I swapped for it only cleared the driver half of the window basically. With the OEM wiper I get about 2/3 coverage.
I also got a hose and aimed it at the window with it running, and applying just a bit of pressure to the arm as it cleaned got it to 100% coverage easily. The spring got lost in transit tho... so I can’t speak to it. But it should work very well.