What are
/r/AnaloguePocket's
favorite Products & Services?
From 3.5 billion Reddit comments
The most popular Products mentioned in /r/AnaloguePocket:
The most popular Services mentioned in /r/AnaloguePocket:
The most popular reviews in /r/AnaloguePocket:
Someone a while back recommended this one: https://www.amazon.com/gp/product/B07KLRM22B/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I bought it months ago in preparation for my Pocket arriving around this time. I gotta say, it is damn perfect.
This 2,5" HDD Pouch fits perfectly for my pocket. In the beginning it was a bit tight, but it got better after a few weeks. I dislike the 3DS cases, since there's always a little room left and the Pocket flies around in there.
It's this one.
I bought an Anker Nano and it works great.
I don't know of anything Pocket in particular, but maybe try this glow-in-the-dark vinyl adhesive paper that you can cut up yourself? No idea how comfortable it would be on your fingers or if it would cause slips while playing, but might be worth a shot.
That's interesting. I ended up buying a Samsung Pro Endurance card (specifically https://www.amazon.com/gp/product/B09W9XYQCQ), and did get white edges. I imagine there are a dizzying array of manufacturing variances with these things, however.
As u/blood_on_the_snow suggests, using the original sticker is the best thing to do initially. After that, I've found the best thing is to use high-quality packing tape to dab the rest of the glue off. That way there's no solvents, no rubbing, and no smearing.
I've been using Scotch packing tape for removing stickers (and also... for packing) for the better part of a decade, and it's hands-down the best way to remove residual glue.
Link:
Bonus tip: It also worked beautifully for getting dust off of the underside of the official Pocket screen protector (which was an hour-long, 40+ attempt nightmare to install).
Looks good, thanks, ordered it. This was the only case I found for GB/GBC games. It only holds 4 carts, but it's something.
https://www.amazon.com/dp/B000ESLIB8?psc=1&smid=A25CG50TG87GJ0&ref_=chk_typ_imgToDp
I actually went on the site again now to check as I thought when I looked recently it said that it did come with an EU adapter. So I guess we both must’ve just read what we wanted to hear!
One of these types of adapters should work:
https://www.amazon.com/Unidapt-European-Adapter-Converter-adaptor/dp/B077WJYNQ5
I got one of these and it'll do until I can spare the money for the Waterford one, doesn't really fit any games but it keeps it nice and safe in my bag, it's cheap, and it ships fast: https://www.amazon.com/dp/B074JZZV36?psc=1&ref=ppx\_yo2ov\_dt\_b\_product\_details
I started a wiki as I began learning how to work with FPGAs and the Pocket APIs: https://github.com/agg23/analogue-pocket-utils/wiki
It's a bit lacking now, but it might give you some useful information. Hardware design is very different than programming, so I highly suggest you read some digital design textbooks to get the basics. This Verilog video game book is also highly recommended.
you need a charger like this: https://www.amazon.com/gp/product/B08T67HDH1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
​
If you're using the charger that came with your phone it will charge really slowly. I don't know why. I had to buy this adapter specifically for my pocket and it charges normal now
I noticed this the first time I charged mine - I was antsy to get playing - so the next time I charged it I whipped out my handy USB-C multimeter (https://www.amazon.com/MakerHawk-Multimeter-Multi-function-Capacity-Detector/dp/B07GQLYMR9) and watched it. It slowed to a trickle, but only when it actually stopped completely did the light turn green. I assume the OS is just displaying 100% when it's technically like 99.3%, and battery controllers are always slowest at the end to prevent damage.
This right here. Cost me like $11, and it's even cheaper now. Soft case with just a bit of cushioning. Comfortably fits the pocket, two flash carts (one in the cartridge slot), a GG adapter, a GBA link cable, and a pair of wired earbuds quite comfortably. It's a not-too-snug, not-too-lose comfy fit. Here's a small album I made showing the Pocket in it.
I use this hard drive case. It's cheap, well padded, has some room for games too. Not the best looking, but usually it'll be inside of another bag anyhow. https://www.amazon.com/Drive-Logic-DL-64-BK-Portable-Carrying/dp/B003VVH8Y6
Get a somewhat solid carry case to house it when you're not using it and bringing it traveling. This is what I got:
https://www.amazon.com/gp/product/B07KLRM22B/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Fits great and a little room for cartridges/cables/SD card readers/etc.
I have the official hard case as well as this one from Amazon — to me the official case is more a display case if you're hanging up your Pocket on the shelf. It's not really a daily use case.
I'm happy with the one from Amazon. Hard shell but soft inside. Lets me toss the Pocket into a backpack easily.
I use this one
MoKo Funda Cinturón para Móviles, Fundas Cartucheras de Nylon para Teléfonos con Clip, Bolsillo Universal al Aire Libre para iPhone 14/14 Plus/Pro/Pro MAX/SE 3 2022 Smartphone de hasta 6.7'' https://www.amazon.es/dp/B09D78H17G/ref=cm_sw_r_apan_i_3CCNTFPSFVC8PMFRZ9FS
It's a perfect fit, pretty resistant, and fits in every bag I have. Don't know if it's easy to find in the USA, though.
Waterfield case here too! I love it. Holds the Pocket, and I can put 2 or 3 cartridges in the outter zipper and also a cartridge in the Pocket itself. I have a nice screen protector on it too. Not the one from Analogue but a different one I got off Amazon that came in a 2pk. It's always nice to have 2 screen protectors in case you botch the 1st attempt. Somehow I got it on perfect the 1st time with no bubbles! I'm usually the bubble master when it comes to that, so it's nice to win the no bubble lottery, Lol. When I travel long distances I put the Pocket in a Eylar case that I cut out a perfect fit for it in the foam while it's inside the Waterfield case. Eylar Small 10.62" Gear,... https://www.amazon.com/dp/B09BDH69XN
Waterfield case here too! I love it. Holds the Pocket, and I can put 2 or 3 cartridges in the outter zipper and also a cartridge in the Pocket itself. I have a nice screen protector on it too. Not the one from Analogue but a different one I got off Amazon that came in a 2pk. It's always nice to have 2 screen protectors in case you botch the 1st attempt. Somehow I got it on perfect the 1st time with no bubbles! I'm usually the bubble master when it comes to that, so it's nice to win the no bubble lottery, Lol. When I travel long distances I put the Pocket in a Eylar case that I cut out a perfect fit for it in the foam while it's inside the Waterfield case. Eylar Small 10.62" Gear,... https://www.amazon.com/dp/B09BDH69XN
Cheap and easy Amazon electronics bag
I also have some 3DS XL cases that I might use if I'm throwing it in a full backpack, but for daily use this bag is more than fine and costs just a few bucks. I fit in an extra cartridge or two, plus some wired earbuds on the outside mesh.
The official screen protector started separating from the screen and peeled up after a couple of months.
I got this to replace it, and it’s been fine so far: 2X BROTECT HD-Clear Screen... https://www.amazon.ca/dp/B09RQC7GY2
Already have mine, but the main things I picked up were a cheap pouch from Amazon, and a rad metroid 2-themed front skin and EZ-flash cartridge stickers from this Etsy shop, though the products in question are no longer available sadly. I also upgraded my EZ Flash Omega to the DE version.
I have not tested this with the original/authentic trading cable (the grey/purple one) but I bought this from Amazon to evolve a Pokémon during my nuzlocke and is pictured above and had no issues with several trades. GBA link cable (Amazon)
I have put mine in the official Nintendo plastic cases, and have put those into this as per another redditor's suggestion:
...it looks amazing imo, I'm putting a Nintendo sticker from Etsy on the clear cover so it looks slightly official
I had a big honker that held like 8 games and the Game Boy. Camo fabric and a shoulder strap. It was awesome haha.
Looks like that cutout you're keeping the GG adapter in was meant for the original rechargeable battery pack: https://smile.amazon.com/dp/B002QIYO56/
It should just come right off if you pull on it. If you're looking for a replacement, the amFilm screen protectors are good.
Yeah it’s pretty cool!
UniKeep Game Cartridge Storage Case for Nintendo Gameboy Advance - Holds 10 Games https://www.amazon.com/dp/B09L2CTBJX/ref=cm_sw_r_cp_api_i_8N0E28BQ2AQFGNNY6SZ1?_encoding=UTF8&psc=1
For everyone asking: WERJIA Hard Carrying Case Compatible with RG351V Handheld Game Console (Case Only) https://www.amazon.com/dp/B09CCRLTVJ/ref=cm_sw_r_cp_api_i_124AVFED9BVJKMHFHJZF?_encoding=UTF8&psc=1
Yeah not to cause too much confusion but maybe this.
I only say that because the dimensions match better with the pocket and price is 15.99 like the title. Hopefully OP will provide a link!
This is only partially a joke recommendation, but I use this most of the time and it charges surprisingly quickly. Mostly because it's next to my bed to help me sleep and it has a USB port for charging devices.
Very random, but it's actually the case that came with this: https://www.amazon.com/gp/product/B07S3ZKVXT/. The controller sucked, and I never used it. I was rummaging around looking for potential cases that might hold the Pocket, and that one worked perfectly. That said, as far as I understand it, you should be able to buy just about any New 3DS XL case, and it should be a dream fit for the Pocket.
A lot of people seem to be getting softer bags to store theirs, but I can't bring myself to do that since I worry it'll still get dinged through the bag.
So I end up with stuff like this: https://smile.amazon.com/gp/product/B097TBKNX7/
I have a case right now that's almost exactly like that (also designed for the 351v, which I also own) but without the extra little netting in the bottom part of the case. I really like it since it feels sturdy and can fit 2-3 cartridges in the top pouch area.
It also just barely fits in my cargo pants pocket (but without the ability to close the pocket. Or easily in my shoulder bag along with my other items.
I can confirm this works, had the same problem. Just received my EZ Flash Jr. in the mail and did the FW5 update on my original DMG-01. Now it works on the analogue too. Using this Sandisk class 10 SD card with 32gb (careful with FW5 on other SDs). So if you don't own original hardware, there is no way to update to FW5.
Reply from her below:
I used a 3mm hook with drops muskat cotton yarn. The clasp is a magnetic sew on clasp. This is the one I used https://www.amazon.co.uk/dp/B08GHH3RB5/ref=cm\_sw\_r\_apan\_i\_M1CN730KW79W01CG4BHQ
Pocket case pattern
Ch 24, turn
Rnd 1. Starting from 2nd Ch from the hook, sc 22 or until you get to the last but one stitch, 3 SC in last stitch, SC 21 across other side, 3 SC in last stitch. (48).
Rnd 2. SC 21, Inc, SC, Inc, SC 21, Inc, SC, Inc (52).
Rnd 3 until desired height. SC in each st (52).
Then the last Rnd I did in slip stitches just to tighten the top slightly.
Clasp flap pattern
Ch 13, turn
Starting from the 2nd Ch from the hook, SC 11, 3 SC in next st, SC 11, Ch 1, turn.
Sc 11, Inc in next 3 stitches, SC 11, Ch 1, turn.
SC 11, Inc in next 6 stitches, SC 11
Pull tail through leaving enough to sew to the body of the case.
If you want the clasp flap longer or shorter, adjust the starting chain length.
The cross stitch design was made in stitch fiddle https://www.stitchfiddle.com/en
I bought this Bluetooth transmitter to use before switch added support. Inexpensive, light, gets the job done
I bought it on Amazon. There is one vendor that still has them. RGRS NEW EZ Flash Omega Definitive Edition Version Shell Micro SD Game Card for NDS NDSL IDSL GBA GBASP EZFLASH [video game] https://www.amazon.com/dp/B08T746ZM3/ref=cm_sw_r_cp_api_i_M6HW4W8GZ67VG6526G66
Here's the one I bought cheap off Amazon: https://www.amazon.com/dp/B07833GL7W?ref=ppx_pop_mob_ap_share
It's pretty great! Soft, a little bit of padded protection, just tight enough to hold the Pocket at its orientation while still having plenty of time to fit additional cartridges, accessories, etc.
Here are some pictures I took; https://imgur.com/a/p8lHeW9
I'm 0 for 2. The first one arrived chipped and the second caught a ton of dust. Bought a third party one on Amazon that came with 2 screens and was $4 cheaper than the Analogue screen. Went on perfectly the first time. Crystal clear, you would even know it's there. This is the one
This is the best screen protector so far. A reputable company that makes good ones for other devices (I use it for my Nintendo Switch). It also comes with 2 just in case you screw up the first attempt.
Thanks for all the replies! I'm probably gonna get this one since the specs seem to match the official brick, and it's collapsible so it's better for travel. https://www.amazon.com/dp/B08BCCVM3P/ref=cm_sw_r_awdo_EE2GCEEJEN7PF2YBEC9S
I'll come back with an update if I have any issues with it!
No, this was made for the 351v (which I had in it until I got the Pocket, and will use until the other case I ordered is delivered).
For reference: https://smile.amazon.com/gp/product/B097QV3KJB/
I bought this one in preparation back when I preordered the Pocket, and it works great. Both for Pocket, and for Switch and PC. It's nice if you just want a simple 2D games controller with a low profile.
Another cheap one, looks to be from the same manufacturer as your smaller one, is here on amazon: https://www.amazon.com/gp/product/B07833GL7W/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
fits the pocket perfectly with just the right snugness. Also fits 1-2 extra GB/C carts plus I like to keep my earbuds on the outside mesh pocket: https://imgur.com/a/qeFrbOr
Just FYI, Amfilm’s screen protector is great. You get 2 for $12. None of that $30 bs
amFilm 2-Pack Tempered Glass Screen Protector Compatible with analogue pocket, Anti-Scratch,Easy Installation https://www.amazon.com/dp/B09SLMSG6N/ref=cm_sw_r_cp_api_glt_i_0MG84HSSRWK98W0EG5EJ?_encoding=UTF8&psc=1
I had the same problem, my thermal paper didn’t work, and through lots of research I found out “taxi paper” or the thermal paper used for taxi receipts works. I now have more thermal paper than I’ll ever need.
Here’s a link Amazon
I got this off Amazon. Works great and crystal clear. It’s not tempered glass, more of a thin plastic film that is great for scratch resistance
Screen Protector for Analogue Pocket (Screen Protector by BoxWave) - ClearTouch Crystal (2-Pack), HD Film Skin - Shields from Scratches for Analogue Pocket https://www.amazon.com/dp/B091M7G175/ref=cm_sw_r_cp_api_glt_i_66RVHCDMX4PFBJC7FBJF?_encoding=UTF8&psc=1
I bought this one for under $10 and it's pretty great. Fits perfectly, not too tight, not too roomy. Fits an additional GBC cart, the GG adapter, a pair of earbuds, and can certainly comfortably fit another thing or two if I wanted. Here's an album I made for someone else.
I got this case, which fits the Pocket, some cables and games, is soft on the inside, but hard on the outside: https://www.amazon.com/dp/B07DQBC6NH/ref=cm_sw_r_awdo_navT_g_FYWP5PEG3KASDV9K08Q8
The Waterfield stuff is premium and all, but I want something I know will actually protect it, and isn't some expensive sock.
This is the one I am using…Officially Licensed Hard Protective 3DS XL Carrying Case - Compatiable with Nintendo 3DS XL, 2DS XL, New 3DS, 3DSi, 3DSi XL - Includes Game Card Pouch https://smile.amazon.com/dp/B08NBKCDJS/ref=cm_sw_r_cp_api_glt_i_JH3ZDD6T4FKH9HGPC5PR?_encoding=UTF8&psc=1
Alright guys! I found my old Amazon order for these displays! There’s 2 different sizes I use for games with their protective cases. The long one fits GB and GBC on it. The tall one fits GBA games with cases if you turn them on their side! Here’s the links:
Home-it Nail polish holder... https://www.amazon.com/dp/B00GBCPM6I?ref=ppx_pop_mob_ap_share
Benbilry Acrylic Nail Polish... https://www.amazon.com/dp/B076D2W939?ref=ppx_pop_mob_ap_share
SanDisk 128GB Extreme microSDXC UHS-I Memory Card with Adapter - Up to 160MB/s
https://www.amazon.com/dp/B08DLHKL2S?psc=1&ref=ppx_yo2_dt_b_product_details
A case like this for hard drives or camera actually hold three gba games perfectly. I got one. the pocket fits snug.
I’ll post this here: https://www.reddit.com/r/heisenmack/comments/s02gz8/gameboy_storage_solution/?utm_source=share&utm_medium=ios_app&utm_name=iossmf
Got this from Amazon:
mDesign Plastic Kitchen Pantry... https://www.amazon.com/dp/B07B1QB3ZX?ref=ppx_pop_mob_ap_share
Can store about 20 games comfortably per slot.
I doubt this Pocket firmware update will address the Ez Flash Junior issues on Firmware 4, as it doesn't do anything for the Everdrive GB carts either.
That said, you can still get firmware 5 which allows the EZ Flash Jr to work on the Pocket; just make sure to use a decent quality SD card and properly format it before doing the update on the EZ Flash Jr. Using The official SD association's formatter tool might be a good idea. Firmware 5 can supposedly brick either your SD card or your cartridge if the SD card is not formatted correctly or the read speed isn't good enough, which is why it was 'pulled'.
This guide, posted a couple of weeks ago has the download link for firmware 5 as well as instructions for setting up the SD card correctly for the EZ Flash Jr.
The one I bought was this one, had to modify a bit as the compartments where a bit too narrow for the carts with the cases (would be just fine without them) So I made each side for GB/C and middle for GBA I guess if that gets interest I can make a post about it!
Tea Bag Storage, 6 Compartments Acacia Wood Tea Box Organiser with Acrylic Transparent Hinged Lid By HTB https://www.amazon.co.uk/dp/B07N2L4DXF/ref=cm_sw_r_cp_api_glt_i_DB6RVH8A8RXXT2EV92GQ
Sorry about that, mate. Here, this one just arrived to me today and fits perfectly. Even a bit roomy and can definitely hold a few accessories if you want!
$120 for a ****ing bag? Just because it's handmade doesn't make them artisan class objects to deserve that pricing...
Hand making something that a machine can perfectly replicate doesn't give it value, hand crafting a bag or a case with a creative design and/or custom needs does gives it value.
A quick google search brought me this for value comparison, even though it's for laptop:
https://www.amazon.com/Handmade_world-Messenger-Briefcase-Computer-Distressed/dp/B01LYOTD0Z
I'm not affiliated in any way to that seller/maker.
I'm pretty sure something like that can be found to fit the gameboy/carts needs.
Does the smaller of these bags look like it would comfortably house the Pocket, in its hard case too?
​
- Less than half the price,
- A second, larger bag that you don't even need thrown in essentially "for free",
- Reportedly water-proof instead of just water-resistant, and
- Ships in a couple of days.
Bought this a few weeks back and works great:
Analogue Pocket Screen Protector,... https://www.amazon.com/dp/B091M7G175?ref=ppx_pop_mob_ap_share
Not tempered glass, but firm and definitely better than what comes with the pocket.
Sure! Not showing off, sharing ☺️
It is the UGREEN cable organiser, I've got mine from Amazon.
I just pre-ordered mine and am so excited! Where’s the best place to start collecting games? Here’s my list of favorites from when I was a kid. (Long lost to my parents' house.)
There’s also this one from Amazon Basics
I was looking around for a case for the Pocket since most of the ones posted here are not available in the EU. I finally found this one, which is made for 2.5" hard drives but fits the Pocket and a game.
I got the sizing mixed up in my head, so the one I linked is about the same size as OPs. Need the next size up to support a vertical orientation like I wanted.
Electronic Accessories Bag,Digital Gadget Organizer Case,Nylon Travel Gear Storage Carrying Sleeve Pouch for Cable,USB,Earphones,Portable Hard Drives,Power Banks,Adapters or Camera Accessories https://www.amazon.com/dp/B07JZDLP5P/ref=cm_sw_r_cp_api_glt_fabc_B886WS6DR4246EZ9F9GD?_encoding=UTF8&psc=1
I use this. It's a snug fit on the corners until you have it in the case for a couple days, but I put the pocket face down with the elastic over the back and it holds it securely.
Drive Logic DL-64-RED Portable EVA Hard Drive Carrying Case Pouch, Red https://www.amazon.ca/dp/B006P2R708/ref=cm_sw_r_apan_glt_i_TCH7D6P8NYHN8MYBYSPR?_encoding=UTF8&psc=1
I bought the same case off Amazon Canada and found that it felt way too tight just with the pocket no carts, seemed like there was a real risk of damaging it with the zipper over time.
I wonder if there's some variation in the sizing?
https://www.amazon.ca/gp/product/B07ZDZRMD3/
[Officially Licensed Hard Protective 3DS XL Carrying Case - Compatiable with Nintendo 3DS XL, 2DS XL, New 3DS, 3DSi, 3DSi XL - Includes Game Card Pouch
](http://Officially Licensed Hard Protective 3DS XL Carrying Case - Compatiable with Nintendo 3DS XL, 2DS XL, New 3DS, 3DSi, 3DSi XL - Includes Game Card Pouch https://www.amazon.com/dp/B08NB8BWG8/ref=cm_sw_r_apan_glt_fabc_ZV5F14QP85XY57VJMFZT)
I use this Anker 20w charger for my phone. If you didn’t get Analogue’s own fast charging USB-C power supply, this one should be fine.
https://www.amazon.com/Charger-Anker-Adapter-PowerPort-iPhone/dp/B07WRKXQ8W
Yeah I have this exact case and I don't plan one with the pocket. It would probably scratch the screen if it faces this direction of the net, especially with cables or games. I typically like the oxford crossbody bags like this one: https://www.amazon.com/gp/product/B01KC1H5HC (unfortunately not available anymore) that have a soft pouch for a phone to prevent scratches. Plenty of storage and a removable strap.