What are
/r/BudgetBlades'
favorite Products & Services?
From 3.5 billion Reddit comments
The most popular Products mentioned in /r/BudgetBlades:
The most popular Services mentioned in /r/BudgetBlades:
GearBest
Aliexpress
Walmart
The most popular reviews in /r/BudgetBlades:
This: Sanrenmu New 7010 8CR14Mov Blade Steel Handle Outdoor Camping Survival Hunting Utility Knife Super Military EDC Pocket Tool 710 https://www.amazon.com/dp/B00GMMPIK2/ref=cm_sw_r_cp_api_glt_fabc_G0Z7FVA9XS96WBZ2PNCF
They are not all the same, what you want is the lowest percent, highest heat rating.
The percent is roughly how long it will burn for, was sprayed with some stupid high amount of percent one time, I think it was 12%, felt it for several hours. so do not look for percent but SHU, Scoville Heat Units, higher the better, but at a low percent, like 0.5-2%.
You will.maybe get some contamination, so the short decon time helps.
I really like this: https://www.amazon.com/dp/B00G0D33TG/ref=cm_sw_r_cp_apa_glt_fabc_446W9QK1EQHBR1JGHQ2B
Fox labs 5.3 million SHU, I have seen people try to rub it off their face on the cement. It hurts like nothing else I have been sprayed with, but is gone in 1/2 hour. Well, tolerable...
RAT 2 is one of, if not THE best budget knives around. The Rat 1 & 2 are beloved by sooo many people. It would be a great choice. Try to get the one in D2 steel, if you can. It's a much better steel than AUS-8, which the RAT 2 also comes in.
Take a look at these as well:
https://www.amazon.com/dp/B0033HHEL0/ref=cm_sw_r_cp_apa_glt_fabc_BAMDTMCD1WTE94C6GVX7
The mini bugout is also a very nice choice. Hope any of this helps!
It's a Chinese cheapo you can get from amazon also for $13 bucks. Probably 5cr13mov or something.
BTW in case you'd like an inexpensive beater that should (?) also conform to UK knife laws, check out the Sanrenmu 9051.
Same spring-tension slipjoint mechanism as you described for the UKPK but a more conventional look and feel otherwise. Had this one for quite a while and always found it a joy to carry. (if you don't feel strongly about tip-down carry, that is ;))
This knife surprised the hell outta me, right out of the box I was incredibly impressed. The flipping action is smooth and quick. Its thanks to the very tight detent. The jade g10 handles are sculpted very well and have no hot spots. The factory edge is very sharp and satisfying to cut with. Overall this knife feels more expensive than it really is. It can be found at aliexpress for just under 20 dollars! https://www.aliexpress.com/item/Newest-Kesiwo-folding-knife-Flipper-111-ball-bearing-D2-knife-blade-G10-handle-pocket-outdoor-survival/32684482922.html
Land 910 Liner Lock Folding Knife 12C27 Stainless Steel Blade https://www.amazon.com/dp/B07Q1WZV88/ref=cm_sw_r_cp_api_glt_fabc_G8H7V67SQ02M4Q9QTT9W
Sanremu Land 912 913 Frame Lock Pocket Folding Knife Stainless Steel Blade Handle https://www.amazon.com/dp/B07LGQP63M/ref=cm_sw_r_cp_api_glt_fabc_23H7NHYAFZ0RJ7GCVFJ1
These are fantastic knives, especially for the price.
SRM 9202 https://www.amazon.com/dp/B08HYWLMLV/ref=cm_sw_r_cp_apa_glt_fabc_K8PAW2D9ZYB75BMKQMQF
Axis lock, D2, sanrenmu QC, beautiful looking piece, 30 bucks on amazon
Edit: the Ganzo firebird line also has a lot of following but I haven't bought any from them personally
But there's several Civivi models that you can find under $50
Look at CJRB as well
Hao Ming Knife ($11.90)
9CR18mov blade
G10 with carbon fiber overlays
Recessed liners
Deep carry pocket clip
Ball-bearing pivot
Good action
Came surprisingly sharp out of the box
I mean, for 12 bucks with one-day shipping from Amazon, I figured... why not, right?
Anyhow, who else to share this find with other than all of you budget bladers?
Here is a little walk around and action video.
Overall, it may be a little rough around the edges, but considering this thing was $11.90, I'm impressed.
If you're interested, here you go:
Camping Knife-Folding tool-9Cr18MoV Razor Sharp blade-G10 Handle-EDC Tactical Tool for Outdoor Hunting and Fishing https://www.amazon.com/dp/B08NJMTCBV/ref=cm_sw_r_cp_api_glt_fabc_TZDZNQJ3CWBZYGH56HC8
I was actually more interested in getting the other Hao Ming knife, but Amazon wouldn't ship it to my location... because, well, ummm, there is no logical reason why they'd send me this one and not the other.
Found the Amazon link:: New AO Army Liberator Knife https://www.amazon.com/dp/B00NY0T98C/ref=cm_sw_r_cp_apa_OxLEAbDMWK0T2
Stainless steel handle and 440 stainless steel blade. Manufactured by Grey Eagle Traders. $16
*Words are hard
Amazon, strangely enough. Easy to tell each one is hand made. Here is the link, I’m very happy I got this. here
Here is an Aliexpress link. Small Ti and either VG10 or S35VN claimed knife on IKBS bearings.
Have you tried the "FURA Mini Powder Steel Folding Knife" yet? Looks attractive, claims to be M390/Titanium. https://www.fasttech.com/products/1901/10033078/7247503 http://www.gearbest.com/pocket-knives-and-folding-knives/pp_623855.html
I just found out that the Ganzo G724 has been discontinued. It seems Ganzo has pulled the pug on one of their best offerings, and supplies at many vendors are beginning to run out. I highly recommend this knife, its lightish very ergonomic, and just a joy to EDC. Why they are choosing to make more G704's and G726's over this I will never understand. If you want one, get one now before they are all gone.
Here I found another seller that has the jade in stock :) link
Amazing idea, I hadn't even thought that was a thing you could do.
Strangely, it doesn't look like any of the RAT 2s on the website are D2. Does this one look like it is to you: https://www.amazon.com/Ontario-Rat-II-Linerlock-D2/dp/B079YYBCHQ
Blazing S. 6.3 inch Fixed Blade Hunting Knife I 2.5 inch Blade I with Finger Hole I Outdoor I Camping I Hunting I Skinning Knife (Printed Damascus) https://www.amazon.com/dp/B092KM7S1L/ref=cm_sw_r_apan_glt_fabc_NPZYQ8FAYG8D71BDXJ6B
Yeah, $14, that's gonna break the bank man. :D https://www.amazon.com/Folding-Tactical-Handle-2-Inch-Limited/dp/B081W5MXL9
But if you wanna go "Big Spender" this is one I personally have that's a fun little one for around $25. https://www.amazon.com/Eafengrow-Bearing-Flipper-Camping-Survival/dp/B082MZ4NMH/
For my hand it's just about perfect once you break it in a little. Lots of bad reviews because someone with a big monkey paw may have some issues. Also the "D2" steel is more like an AUS-8 which gets people all knotted up when they get in the specifics of magical mystical steels.
I posted a video 2 days of my Ganzo FH41.. Hands down its my favorite knife. Check my post history on here if you’d like to see it! Out of all the knives i own, it always ends up in my pocket lol.
If you handed it to me and told me its a $25 knife, I’d call you a liar haha. They make them in a few different color designs.
Whichever one you pick up, I’d love to hear your thoughts on it if you remember this! Lol
This one has a clip. Not deep carry, but... Also, great action.
Keycaps: https://www.amazon.com/SOOTOP-Steampunk-Typewriter-Mechanical-Keyboard/dp/B08FTFXWY1
Possible keyboards that I recommend for each layout:
60%: https://www.amazon.com/GK61-Swappable-Mechanical-Gaming-Keyboard/dp/B07QYHM32Q
Any other size: A Keychron keyboard that has RGB in the listing on Amazon
/u/legobaby16637 /u/mr_smith24 /u/FartExpo /u/samsonity
There is another contender:
https://www.amazon.com/Off-Grid-Knives-Backcountry-Blackout-Bushcraft/dp/B08DDK3QR6
...but as I said, if I am spending that much, it will be a perfect knife, and that one is just shy :)
YXGOOD 10 Pieces Tungsten Carbide Double Cut Rotary Burr Set with 3 mm (1/8 Inch) Shank and 6 mm (1/4 Inch) Head Size https://www.amazon.com/dp/B01MXURLTG/ref=cm_sw_r_cp_api_glt_fabc_4VW287ZK7STMKAT5RYKW?_encoding=UTF8&psc=1
I bought this set and the second from the left worked really well for me. I just kept it slow and cooled it frequently. This was also my first attempt at a spydiehole mod bc I’ve got another knife in mind that will get an even more extensive overhaul.
If this is your first balisong, buy a trainer unless you like to bleed...
Something like this: VORNNEX Practice Butterfly Knife with Sure Spring Latch, Full Stainless Steel Black Dragon Dull Balisong Trainer, Unsharpened Butterfly Knife Comb for CS GO Training(Silver) https://www.amazon.com/dp/B06XRCGCV8/ref=cm_sw_r_cp_api_glt_fabc_NFXSA60S9RCC7502J50G
Similar to this one on Amazon.
And also available on ebay.
Kershaw and ganzo make decent cheaper blades. For around 50ish this is a good option if you want an assisted knife with thumbstuds and a partially serrated blade.
https://smile.amazon.com/dp/B0009VC9YA/ref=cm_sw_r_cp_apa_fabc_s9CcGb2N0Z9PQ
Try this. Make sure you get the Dry Lube. The Oil Lube gums things up.
Sentry Solutions Tuf Glide Dry Film Rust Inhibitor Guns Knives Tools Needle Bottle .5 oz, Red (91060) https://www.amazon.com/dp/B000Q82HSY/ref=cm_sw_r_cp_api_fabc_G1dYFbF0BR4N7?_encoding=UTF8&psc=1
Ohh, you're right. I am talking about the Kubey.
It turns out there is a nearly identical Sanrenmu version (knockoff?), model 7049:
https://www.amazon.com/Sanrenmu-LTE-PK-Folding-Knife-Liner/dp/B07PH4PM6C?th=1
I usually use these from Amazon. Theres two different gauge. I use wider one with mineral oil (more viscous) to clean knife blades and external surfaces, and use the narrower one with Tuff glide (less viscous) on pivots.
https://www.amazon.com/dp/B00FNPTYYK/ref=cm_sw_r_cp_apa_UjGrxb1AEMM3J
Use the link below to donate .5% of your purchase to charity.
Amazon Smile URL: https://smile.amazon.com/StatGear-Pocket-Samurai-Aluminum-keychain/dp/B072HZNNPL/ref=sr_1_28
This bot is still in test phase. Please PM me for suggestions, complaints or questions.
This is not the style of folder that I would typically buy, but I've decided that I like it quite a bit. It's pretty hefty, which is one of the things to like about it. The blade is 4" of 12C27 and it weighs a good 8 1/2 oz. It's got good ergonomics, the handle is very chunky and that is a glassbreaker on the end, and it's pretty easy to deploy, with 3 methods of doing so (cutout, thumb studs, flipper). The pocket clip can be used tip up or down, and provides for pretty unobtrusive carry, being a deep carry clip and fairly short in length. I have knives that are much smaller than this one with much larger clips.
Picked it up on amazon, it's $27.83 w/shipping currently, so it is very budget friendly: https://www.amazon.com/gp/product/B00IJ94MR6/
If you like larger folders and you are looking for something a little different, check it out.
Kershaw Cryo II is a good bet, it comes in a few different configurations, mainly clip point or tanto blade, and TiNi coated/stainless handles vs. blackwash.
The clip point stainless version is on sale on amazon atm for $21: https://www.amazon.com/Kershaw-3-25-inch-Stainless-Full-Body-Carbo-Nitride/dp/B07NCVFGL6
If you're partial to the Delica, I'd go with the F759M. It's simple and light. I've been carrying one for 2 years. They coincidently have 4 different colors to choose from, too, on Amazon.
Although, if you do get them, you're going to want to file the thumb hole just a little bit before giving them away. That thumbhole comes out of the box a little uncomfortably sharp. I used the tapered diamond rod on my Sharpal.
To complicate things more, several web sights have the LK6 listed as D2.
The Gnome is an excellent Chinese D2 titanium frame lock. I liked it enough to give them for Christmas on several occasions. The machining and action are both top shelf. I've never found the original, but when it came onto the market a few years back, the internet consensus was that it is a copy of a high end design. So that that bit of hearsay for what you will. That said your LK6 clearly took more than passing inspiration for the Gnome.
https://www.amazon.com/Gnome-Pocket-Titanium-Folding-Flipper/dp/B01I6XHHEO
OP, if your looking for something a but smaller here is the civivi odium, only 6.1" total length! This will very well be my next knife. After my first civivi (baklash) I think I'll remain loyal to the brand. They are definitely quality products.
This is one of the knives that most gets people ragging on Ganzo for making knock offs / clones. For comparison, take a look at the Ontario Rat II.
SRM Folding Pocket Knife with 8Cr13MoV Steel Blade, G10 Handle, Ambidextrous Lock, Steel Clip, Thumb Disc Opening,Liner Lock EDC Knives for Men Outdoor Survival https://www.amazon.com/dp/B08C4MP6BK/ref=cm_sw_r_cp_api_i_ahusFbYEPHKH5
I’m admittedly not an oil expert, but picked this up recently after doing a little googling & Amazon-review research.
This I see regularly in YouTube knife vids:
It's a DNA 'Deluxe Mini'. Bought from Amazon, £10.09. Pretty good. It's very small but was super sharp right out of the box, is legal to carry in public in the UK as the blade is 1.5". Comes on a little chain which I have removed for aesthetic purposes. It's very much a baby knife but it's the start of my collection.
​
Two of these for $30 and change right now. Fantastic knife for the price. Dye one or both of them to your liking.
This is a knife by Albatross and I only got it to flip open and shut, and for that it is good. Solid fidget boi.
The steel is probably garbage but it did cut some real cardboard apart at work when I brought it to see if it had a decent edge (not some thin cardboard shit either, some actual packaging cardboard) but it feels like it would dull out fast for obvious reasons.
Not a fan of the naked hybrid karambit design, but M-Tech makes some decent knives if you avoid the ones with skulls, pot leaves and gold blades. I have this one and it’s a bargain at twice the price, the level of polish on the handle and blade is first rate. It also is spring assisted and is very flickable.
> I love blades and sharpening them and such but I an really not knowledgeable about steel.
Well I've got a treat for you:
Much if the same content is available in dead tree form:
https://www.amazon.com/Knife-Engineering-Steel-Treating-Geometry/dp/B08D4P9D95
But I can also save you a whole lot of trouble here. Forget worrying about steel type and concentrate on geometry. You'll see far more benefit from optimizing geometry than you will steel type.
Yes! It’s a double bladed too! Here’s the link to the Amazon for some pictures of it https://www.amazon.com/BTS-Sports-Dark-Blade-Knife/dp/B09NFKGBMW/ref=mp_s_a_1_4?crid=1GM26PPAZMCB8&keywords=batman%2Bknife&qid=1668266807&sprefix=batman%2Bknife%2Caps%2C160&sr=8-4&th=1&psc=1#immersive-view_1668268582700
Kershaw has a range of well reputed assisted openers, though none which look much like the CS, since they're flippers. I even found a dirt cheap knockoff of one which seems pretty decent so far. https://www.amazon.com/gp/product/B08QD33JST/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
if you can stretch your budget, you can ALSO pick up a CJRB Feldspar for like $28 from the CJRB Amazon store.
https://www.amazon.com/dp/B085DLBC6X?psc=1&ref=ppx_yo2ov_dt_b_product_details
a couple of the colors have a 20% off discount code
What's wrong with sticking with a Ganzo? I was in a similar situation when I worked supermarket produce and had to break down large multiply cardboard boxes. I'd watch guys making multiple cuts over and over again trying to get the tiny razor blade of a utility knife to cut through that thick cardboard and realized they were simply using the wrong tool. My work knife of choice was a Ganzo Firebird FH41 with a 3.5" flat grind blade in D2 tool steel that was a beast for slicing carboard if you keep it sharp. And Ganzo's D2 holds and edge longer than their 440C, in my experience. D2 is only semi-stainless steel, so I kept it away from wet jobs and carried a separate produce knife, which was a 6" Mercer Culinary Produce knife. Now, the 6" thin, flat grind blade of a produce knife will murder cardboard like nothing else, but I like to keep my knives that touch food separate from those I use for utility work. And, you might get looks if you carry a 6" fixed blade around for work, but definitely take a look at the Ganzo Firebird D2 blades. Their D2 steel test out at 62HRC or more, great build quality, wonderful manual flipper actions with good detents and solid lockup, very nice ergos, nice G10 scales. Ganzo Firebird knives are about the best folding knives on the market for under $25, IMHO.
The SanRenMu 7046 is the most unintimidating, inexpensive folding knife I've had. The shape of blade makes it an excellent utility knife. It's small with a thin profile, and easy to sharpen and clean. https://www.amazon.com/Sanrenmu-Folding-Pocket-Knife-function/dp/B0B2JKZBZ7
Here's one I've been eyeing but haven't pulled the trigger on cause I've bought a lot of knives recently
Don't mind the Kizer, I was already carrying that and it went well with the picture.
The Ganzo G720 is a beast.
The Albatross is fun to fidget with.
Both have really good G10 scales. The Albatross has a subtle pattern milled into the scales. The Ganzo's scales are fabulous.
I EDC a Brazen for all sorts of things… I work in a warehouse— so it is used to cut upon stretch-wrapped pallets, cut box straps, and slice open boxes & packages.
At home I used it to open Amazon packages, unpackage kids toys, cut open chicken feed bags… I like the tanto blade for scraping stickers off things.
I own a bunch of knives and my black Brazen tanto is my favorite. I feel like a caveman holding a piece of raw, razor-sharp obsidian when I use it, and for some reason that just feels so right and natural at a visceral level. Looks aside, the knife opens and closes very smooth, and the design is quite ergonomic and pleasant to hold.
I purchased this one a few months ago
I've carried it everyday for the past two months at work, have used it for general box break-down, splitting medications, opening kennel doors from the inside, and light cutting.
Though it is marked D2, I doubt that is actually the material utilized, as there has been no staining or spots despite the frequent use of caustic chemical exposure (that quickly stains my genuine D2 blades). The edge has held wonderfully, and the blade shape itself is easy to touch up when required. Lock-up isn't quite as tight as a Microtech, but no far off either.
For a budget OTF, I am honestly impressed. Personally, I don't care much for OTF's but I needed something I could quickly and easily operate one handed for accessing kennel locks from the inside, and didn't want to get something "nice" that was going to get destroyed at work. This one has impressed me, and has exceeded my expectations.
Alternately, people could buy the Land 810/910 if they want a really close Sebenza clone, albeit one with really decent build quality and one that can be bought over Amazon as opposed to DHGate or Aliexpress.
I think hes referring to this one: Ganzo G729
Try this, Crescent 3-1/2 Inch Harpoon Blade... https://www.amazon.com/dp/B08842J8XH?ref=ppx_pop_mob_ap_share d2 steel for a great price feels nice and solid I got mine 2 days ago and am really enjoying it, with that said match this with a utility knife and you'll be good to go, I'm a handyman and we all have our edc knife and utility knifes for the rough stuff
I would definitely say the Rat, or Rat II is a great knife. Really super bang for the buck.
The Sitivien ST110 is also great for ~ $27 US
I was kind of asking about import procedures / taxes, if someone ordered it here, then shipped it to you.
One of my favorite knives, just don't let it rust.
Opinel No.08 Carbon Steel Folding Pocket Knife with Beechwood Handle, Brown (2540089) https://www.amazon.com/dp/B002SCUO04/ref=cm_sw_r_apan_i_R382QB5WWPE65JATXFNZ
One of my favorite knives, just don't let it rust.
Opinel No.08 Carbon Steel Folding Pocket Knife with Beechwood Handle, Brown (2540089) https://www.amazon.com/dp/B002SCUO04/ref=cm_sw_r_apan_i_R382QB5WWPE65JATXFNZ
That’s where I got mine, but it’s in wood and not abalone and it’s more expensive, tho cheaper when I ordered a few months ago.
It’s literally drop shut for me, and pretty impressive for the price.
Okay it was a top result
Knife Display Case, Knife Case, Pocket Knife Display Case with 40 Slots, Small Knife Case Storage, Pocket Knife Holder, Folding Knife Sheath Bag Case for Survival Pocket Knife,Tactical,Outdoor,Kitchen,EDC Mini Knife https://www.amazon.com/dp/B086SW6GNC/ref=cm_sw_r_apan_i_T3SWSP8AMR4QCA640XX3
Ganzo Firebird FB727S = probably my favorite knife under $20
https://www.amazon.com/dp/B07X1MVDCZ/ref=cm_sw_r_cp_api_i_CHGRE3PHVWHXWGXN377S
Alternatively,If you look around on eBay, you can find good condition Kershaw Leeks for under 20 as well, for a bit better steel.
This is a great little fidget knife and plenty sharp out of the box. Needed a little tune-up and some thread lock but I love it now. Super budget about $13 on Amazon. HUAAO 6.3’’ Folding Knife, Pocket Knife EDC Knife with D2 Steel Blade, Pocket Clip, Liner Lock, Flipper, Perfect for Camping Hunting Hiking Outdoor, Gift for Men Women https://www.amazon.com/dp/B099RRFDH3/ref=cm_sw_r_apan_i_45E9AV93Q5V7ER7W5CY7?_encoding=UTF8&psc=1
Basically yeah. They're made out of glass reinforced polymer like a power tool. They're super tough. The blades are also by far the best but fair warning, they're SCARY sharp. The bone or spur or pry bar or whatever is pretty solid as well, but it doesn't run all the way through the length of the tool so it isn't the best for super heavy duty prying. Great for most things though.
$11.50 on Amazon. They also carry this model at either Depot or Lowe's, can't remember which. I would also highly recommend the speed blades. They're the sharpest blades I've ever seen. Anywhere on anything basically. Very good japanese steel. A pack of blades probably costs more than the knife (for 50) but would last most people a lifetime. I used to use one daily at work and have gone through thousands of blades. Olfa is king.
If you ever buy a box cutter, buy an Olfa knife. Preferably the 18mm snap blade models. I would recommend this one.
Their wheel lock knives in the same style are also excellent although not one handed. All of their knives are fantastic. All of their blades are also the best I've used. The "speed blade" is the sharpest blade I've ever used and they hold an edge better than other blades as well.
I've gone through thousands of snap blades. Trust me, Olfa products are worth the investment. They last. They make the job easier. They are safer. They work better.
Seriously, if you haven't tried one and you treat box knives like they're disposable, just buy one of these and you'll have it for life if you don't lose it. They're tough as hell and they perform like no other. Just be careful. The blades are SCARY sharp.
These are highly sought after by the budget pocket knives community.
Here you go:
QSP Penguin Pocket Knife,D2 blade,Various Handle Option, Denim micarta handle https://smile.amazon.com/dp/B093LF5VLG/ref=cm_sw_r_apan_i_REVTMG4GKPM09D9QK1X7?_encoding=UTF8&psc=1
Different branding, but this appears to be the exact same knife.
It’s really dope, I pulled it apart and cleaned, oiled and then stropped. By no means am I a professional so take my opinion with a grain of salt, but I do own about 50 or 60 knives and I play with them a lot and this knife is fantastic, especially but not only because of the price. That’s just like, my opinion mannnnn.
https://www.amazon.com/dp/B09V7WY1DQ/ref=cm_sw_r_cp_api_i_JKA4SHT64CH1KM772EC0?psc=1
I do really like knives made out of old ferrier's rasps or files. I thought I'd give this thing a shot and I am not disappointed at all! Nice thick blade with palm filling micarta scales (important for bushcraft where you're pushing down hard for long periods of time), nice finger choil so I can get up close while doing more precise work, like feather sticks or point work.
Leather is a nice deep red bullhide, very good retention! I can flip it upside down and shake it, good quality.
I'm very happy with it!
MMM 9 Inches High carbon steel handmade fixed blade knife/Fixed Blade Knives/Camping knives/Fixed blade Knife with sheath https://www.amazon.com/dp/B0995CJW99/ref=cm_sw_r_apan_i_JTWV50KET66XEYRM7XQS?_encoding=UTF8&psc=1
We live and learn, OP. Here, try this one:
Morakniv Companion Fixed Blade Outdoor Knife with Sandvik Stainless Steel Blade, 4.1-Inch https://www.amazon.com/dp/B004ZAIXSC/ref=cm_sw_r_apan_i_J3Z5582227KYTSVZZJGT?_encoding=UTF8&psc=1
I've got this, the Craftline Pro S and the Eldris. Mora won't let you down.
Nedfoss looks interesting and I wouldn't mind trying them out.
They have quite a few no name brands in the $10 range, including some made of files or ferriers rasps... Honestly bang for the buck I go for the Pakistani stuff, but it has such a reputation I can't recommend it outside of a gamble. They keep rotating and running out of stock, you kind of have to keep browsing by searching "knife with sheath" and sort by lowest price.
Here's an example: MMM 9 Inches High carbon steel handmade fixed blade knife/Fixed Blade Knives/Camping knives/Fixed blade Knife with sheath https://www.amazon.com/dp/B0995CJW99/ref=cm_sw_r_apan_i_YA63JSE4YNKGYEHX01B1
Benkey Folding Pocket Knife with Clip for Men, Lightweight Camping Hunting Knife 2.99" D2-Blade Folding Knife with Liner Lock G10-Handle for Outdoor Survival Use https://www.amazon.com/dp/B09P793C61/ref=cm_sw_r_apan_i_NT67KRAQBN25JPK8S7ZP
Benkey Damascus Steel Folding Pocket Knife with Clip, Sharp EDC Damascus Hunting Knife with Liner Lock and Abalone Seashells Handle for Outdoor Survival Camping Collection https://www.amazon.com/dp/B09TP9DLRB/ref=cm_sw_r_apan_i_9VWJJ3DSSM4X61ZR22PX?_encoding=UTF8&psc=1
It had a coupon that brought it down to $20, but it looks like that bonus isn't there anymore. But, it's strange, because another redditor said he didn't see the coupon option at the same time as me yesterday. But it was there on my end.
This version with the black G10 is currently on sale on Amazon for $17.49, with an additional 5% coupon to click. That comes out to $16.62 plus tax depending on where you live. Don't think...just buy it. Outstanding deal for a big chunk of steel. Limited-time deal: Eafengrow Pocket Knives D2 Blade and G10 Handle,Outdoor Survival and Everyday Carry Knife with Clip (EF228-black) https://www.amazon.com/dp/B07B61ZMSX/ref=cm_sw_r_apan_i_dl_XKEK748Q3K1BBZF98PM1?_encoding=UTF8&psc=1
Man how’d you get this for $18!?
Benkey Damascus Steel Folding Pocket Knife with Clip, Sharp EDC Damascus Hunting Knife with Liner Lock and Abalone Seashells Handle for Outdoor Survival Camping Collection https://www.amazon.com/dp/B09TP9DLRB/ref=cm_sw_r_cp_api_i_SQVS7EJ2ET4VPSATFWXH
Novel Box Large Glass Top Black Leatherette Metal Clasp Jewelry Display Case 14.75X8.25X2.1 + NB Cleaning Cloth https://www.amazon.com/dp/B0100R120Y/ref=cm_sw_r_apan_i_TMM4959V6AE7ZYPYZ9XA?psc=1
Something like this. They have many sizes, colors, etc.
I would have probably gone with this if I was getting another kizer In that price range. The swayback looks stupid sexy as well.
Sanrenmu 7010. It's small (which I sometimes really like), but pretty impressive at under $20. Sanrenmu 7010 Folding Pocket Knife EDC Knife 12C27 Blade Frame Lock Stainless Steel Handle with Clip https://www.amazon.com/dp/B00GMMPIK2/ref=cm_sw_r_apan_i_MESC05MWPYJ49QBMEKE5?_encoding=UTF8&psc=1
Here it is next to my Shaman for a size comparison. This knife feels so good in the hand, maybe the best out of my collection. It’s also available in an OD green.
I'm not sure if this Damascus is "real". It could be lasered onto the blade because I don't see the layers on the spine. Regardless - it has great action and Carbon Fiber and Titanium. I'm aware this knife is over $50, but Sitivien is a "budget blade" brand.
I had this on my wishlist forever and finally pulled the trigger. I’m quite happy with it so far. Great blade shape.
Sandvik 14C28N Flipper tab and thumb hole
Found it. Searched Amazon for "IVTT Knives" and came up with: BGT Folding Tactical Knives Bearing System Pocket Flipper EDC Knife Multi Tools with Non-Slip Pattern Handle for Outdoor Camping Survival Hiking and Men Gift https://www.amazon.com/dp/B0744CHQHB/ref=cm_sw_r_apan_i_B5SA5NWJJAW1CHWZ1609
Brand is new to me, but I already have concerns: https://www.amazon.com/Waterproof-Breaker-Emergency-Titanium-Multi-Tool/dp/B07YDV9XW6/ref=sr_1_26?keywords=Twosun&qid=1648670587&sr=8-26
😏
Could it be the similar looking EF964? I see that one available in purple and it's when I'm thinking of grabbing next. https://www.amazon.com/dp/B08HQMW9ZX/ref=cm_sw_r_apan_i_9CEMX5KF9W9Q609W0Z01?_encoding=UTF8&psc=1
GANZO Firebird Folding Pocket Knife FB727S-GY 440C Stainless Steel Blade G10 Handle with Clip Hunting Fishing Camping Outdoor EDC Knife (Gray) https://www.amazon.com/dp/B07X1MVDCZ/ref=cm_sw_r_apan_glt_i_0XTG20P6G1ZTAZCTY2WS
It reminds me of a steel will cutjack or even the Ontario rat, but those are liner locks...
The Kershaw is 4.5", the cold steel 4". Sounds about how I like my handles also, but for lock type I really can't help. Check out ganzo and see what the length is closed.
Check out this handle: ARTISANCUTLERY Folding Knife Arroyo (ATZ-1845) AR-RPM9 Powder Steel Balde Micarta Tactical Handle Pocket Folding Knife EDC OD Green Micarta https://www.amazon.com/dp/B08MKSDNKL/ref=cm_sw_r_apan_glt_i_FT7WQQ3Z218822HRX51J?_encoding=UTF8&psc=1
Odd. I'm still seeing it as in stock, shipping within 4 to 5 days at this link: https://www.amazon.com/LAND-Folding-bearing-Tactical-Survival/dp/B09BQL94SX/