What are
/r/CargoBike's
favorite Products & Services?
From 3.5 billion Reddit comments
The most popular Products mentioned in /r/CargoBike:
The most popular Services mentioned in /r/CargoBike:
IFTTT
Mastodon
Trustpilot
Wordnik
Google Photos
Adobe Fonts
The most popular reviews in /r/CargoBike:
I couldn't find much info about whether a motorcycle cover would work well for a bakfiets. So far, this is working well for me. I have an Urban Arrow Family, and using a Favoto 104" cover. Without the rain canopy over the bucket the cover just makes a lake in the bucket, but with the canopy to support the motorcycle cover it works fine so far. It actually fits quite well, with the elastic keeping it snug around the front and back tires and two plastic buckles to keep the sides from pulling up.
(No affiliation with Favoto, just want to share that a $25 cover seems to be working fine. I never tried the official $160 "parka".)
Get a motorcycle disc brake lock's reminder cable for less than $10, and loop one end around the cafe lock's hasp, and the other over your seat horn or around one of your brake levers when you park it. Bam--You'll never make that mistake again.
Yep, a 20"er. It uses the original cantilever brakes. Here are some photos: https://photos.google.com/share/AF1QipO1Ba2rX6c9rLqJSE9BSSVny0LU50tnEI3EZ5VqY-MPopObg-6c3mZ72MIurE2HXg?key=RTRvOHAxQnRYRkpHeTRoYThYd0tKWHJTVWxLaWdR
Re: Holland bikes, they are selling way under market, and they seem to be racking up poor reviews ( ignore the five star reviews, which can be farmed, and count the one stars ).
Your local bike shop would probably be happy to order you some bags direct from Ortlieb.
I got 3 of these -> Thule ProRide https://www.amazon.fr/dp/B018S8U0T6/ref=cm_sw_r_cp_api_glt_i_YWK3FW7P0V04N60BEA14?_encoding=UTF8&psc=1
Middle rack pointing forwards for rear tyre of Load 75. Two outer racks rails turned backwards for the two stand feet to slot into. Only problem is lifting the bike onto the roof. I'm looking for some sort of hoist to make it easier. I'll get a photo & post later.
Rockbros Nylon pedals. Sometimes you can find them under different names for pretty cheap. I think I got some on alibaba for like $10 a pair and so I bought 3 pairs.
Bearings are kinda crap. You'll get a few years out of them.
Nice thing about these is you can adjust the pin depth, so you can, if desired, make the pins barely stick out. That'll save shins.
I just put one of these on the front of my cargo bike for a similar purpose and it worked out very nicely. You'll likely need a c-clamp though as it doesn't appear you have M5 holes.
​
You absolutely want to use brake cut offs even with a pedal assist & no throttle. Experienced cyclists are used to using the tension between a braked front wheel & a pedal driven rear wheel to track stand. A BBSHD motor kit interprets that as "spin the rear wheel and dump you into the curb."
That was about four months fully healing where the bear trap pedal ate my calf.
All parts of the system need to fully agree that either stop or go is the order. Also get some of these:
https://www.amazon.com/Hidden-sensor-electric-without-normal/dp/B0755757RP or similar that play better with mid drive motors than brake levers. Don't ask me why; they just do.
Yes because the old buckle can't come off I will have to completely take off the old straps.
I am going to email the manufacturer right now though and talk to them. This is what I have: https://www.amazon.com/dp/B01B3OO4Z8/ref=cm_sw_r_cp_apa_fabc_nXAPFbDZ16292.
For the stickers, the brand I bought is called "LiteMark". They seem to reflect really well. They have a ton of different designs. https://www.amazon.com/s/ref=nb_sb_ss_fb_1_19?url=search-alias%3Daps&field-keywords=litemark+reflective+stickers&sprefix=litemark+reflective%2Csporting%2C204&crid=1FKWH3K9YNZ6X
The squeaky horn is made by sunlite. It sounds pretty much like a dogs squeak toy (not like a horn). I've seen them at local bike shops too, but amazon has the biggest selection of them. https://www.amazon.com/Sunlite-BL651MXB-Squeeze-Horns-Frog/dp/B000AO5JU2
I added one of these to the left rear rack tube on my Big Fat Dummy, the panniers were in the way of attaching to the axle. It won't work for every trailer, but can be adapted to many. It's not perfect, but working so far.
You maybe can use these bar clamps and double up on the left and right of the bike (2 ea per side). And then utilize the mounting holes to mount the casters (I've seen a variety of casters at Harbor Freight). Of course, you'll have to get some fabrication on to mount them. https://www.amazon.com/Tuning-Clamps-Off-Road-Horizontal-2pc-0-875/dp/B074Q111FS I dislike Amazon, but this is available here. For $13, it's worth a shot.
Spitballing here but you could try one of those furniture dollys? Like here https://www.amazon.com.be/dp/B013G939Q8?psc=1&ref_=cm_sw_r_mwn_dp_5DGCBBK552HQN5EGHWJX good for a garage but not if want to take it with you etc
I cut a wood platform that hooks into the holes in the Yuba bamboo box about mid-level, threw a marine pillow down as cushion, and strapped a car seat base on top of that. The main strap emulates a car seat anchor in a car and goes around the bike frame in the back of the cargo box, it’s a 2” tow strap with D rings on it so shouldn’t go anywhere in the event of a crash.
Higher end components and materials. Much more engineering is required to handle the additional load. You really can't compare a cheap department store/Amazon/etc bike with a decent cargo bike. The components alone on a £2k cargo bike cost more than £275.
There are cheaper long tail cargo bikes that are probably the equivalent of your current bike. For example, this Mongoose on Amazon but I'm not sure if it ships to the UK.
In addition to any lock ideas that make sense here, I love this cheap alarm that I have mounted under the cargo seat. Most days I drop a kid off at school that requires me to go inside for ~3 minutes. I lock the battery and set this motion alarm and love how easy it is.
- If you have high enough ceilings, you might be able to use a set of bicycle hoists. I've used something like this to hoist up a recumbent trike.
- If you have a free wall and a good anchor point, they make hooks you put on the wall to store bicycles upright.
- They also make hooks for ceiling joists to hang a bike upside-down on the ceiling.
​
Idea #3 might be a bit much without some help each time. #2 isn't bad, but not "off the garage floor" and still could be a bit much with a heavy bike. Idea #1 might be a bit fiddly but would do the trick.
You can tie a piece of webbing through pairs of adjacent holes. Then you end up with a webbing grid or rows/columns that you can tie to similar to a "tactical" military style bag.
Very versatile, I like it! As a sailor I always try to minimize the need for tying knots, especially when I am doing a routine task like loading or unloading something. Knots take time to tie, you have to design their configuration, and they require a dexterity that is not available to you under certain conditions. I always consider webbing tie down straps, zip ties, (safety) hook bungies, loop+ball bungies, hose clamps, and the like.
For this grid, is there some sort of eye bolt that can be inserted into and removed from the holes easily? Webbing that can be used quickly and easily?
Actually, thinking a bit more, maybe you could have a 2" loop of cord sticking out of each hole of the grid. You just choose which one you want to strap webbing to and away you go.
I have this mirror mounted on both of my bikes, works great with the swoopback handlebar style of my Mundo. https://www.amazon.com/gp/product/B06XWRMZZF/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I also have a helmet mounted mirror. I use it more than the handlebar mounted mirror, but I enjoy having two options. Not a fan of single points of failure. https://www.amazon.com/gp/product/B003LVHZ4O/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Thirding. I absolutely love my helmet mounted mirror. Put one on my wife's helmet as well and it made her feel so much safer. I have that same mirror. https://www.amazon.com/gp/product/B003LVHZ4O/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Love the bike, love the haul, and love the smile!
I have this kickstand on my other ebike. It's decently stable, about as wide as the heavier duty one on my Mundo. I don't think I'd trust it to hold my kids up without me right there, but definitely a reasonable step up from the single leg kickstand.
https://www.amazon.com/gp/product/B00D1T90XK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Two of the best:
- One of the two models of LoudBicycle horns.
- Delta AirZound horn.
As an alternative, why not just get a cargo trailer? I have a Schwinn Daytripper, it can handle ~100# / 50kg of cargo, with a hitch that fits on any bicycle and allows for easy attachment / detachment of the trailer, depending on your needs for that trip.
Schraeder; it's less common to remove the cores on a Presta valve. ;-)
EXAMPLE:
I imagine there are YouTube videos on actually removing the core. But you basically fit the forked end over the valve in the corresponding gaps and unscrew it. It is likely to push back if there is even a small amount of air under pressure so be careful it doesn't shoot out of the valve stem and get lost. ;-)
Link is to Amazon Canada, dunno if that's helpful for those outside the country:
https://www.amazon.ca/gp/product/B09K78MN77/
I did have to fabricate an adapter to install the hitch. I'll update soon with a detailed photo that shows how that works.
I absolutely love these bags. I use hammock clips to attach to my bike rack. They even fit around my panniers, fold up with not in use or I can quickly remove them due to the quick clips. They use to be cheaper, wonder if they are discontinuing them. Before I got my Xtracycle kit, I thought about running a pipe on the top of the rack to hold 4 of these bags. Not sure if that would have worked, but just an idea.
​
I started with my bike trailer for cargo runs, it's a cheap under $100 trailer on Ebay. I've hauled 3 packs of bottled water in it without issue.
These seats work well for kids a little to big for a yepp and a little too small to sit completely loose in the caboose, plus they are cheap Lixada Bicycle Back Seat Cycling... https://www.amazon.com/dp/B06XKFMPRR
Yea something like this would do the trick (I use a 48v to 12v one) https://www.amazon.com/Voltage-12Volts-Regulator-Converter-Output/dp/B08R774MYD/ref=sr\_1\_5?crid=10L3D6IBYTD5K&keywords=18v%2Bto%2B12v%2B1a&qid=1655841357&sprefix=18v%2Bto%2B12v%2B1a%2Caps%2C100&sr=8-5&th=1
Coincidentally I found this after posting. https://yubabikes.com/usfaqs/faq/my-bread-basket-cargo-net-is-worn-do-you-have-replacements/
I have queued this up in my Amazon cart. https://www.amazon.com/gp/product/B0022ZXOE0/
This will make the basket more useful for sure. Thanks!
(These were recommended in another thread)[https://www.bakkiecycles.fr/fr/bakkies/2-sacoche-velo-porte-bagage-bakkie-light-3770010131137.html]
The idea being you put the wheel In the sling and tow it that way.
I have also contemplated bolting one of (these)[MBP Alloy Quick Release Fork Mount Bike Block (9x100mm) Truck Bed / Rack / Storage https://www.amazon.com/dp/B07MDXZGMB/] to my Mundo running boards and then tossing the front wheel in a pannier.
Personally, I go with sound i.e. I carry bluetooth speakers and blast party music out my pannier. (Yeah sucks that I'm that guy, but it's a necessary evil. I don't like my jarring music selection either--I'm a classical music guy). Lights can't compete too much with the sun (although feel free to try--no such thing as too safe!), but bright (and/or reflective) wear does work.
Horn: I use Hornit and have once tried it in relatively busy streets. It was ok. (I need more case-study :P). Surely this isn't the only one--I'd like to get to know other options too and keep adding horns to my bike so it sounds similar in principle to dual or tri-tone car horns mouahaha.
Camera: currently I use a chest-mounted GoPro 5 and have it set to 1080p 60fps. The 1080-pixel is really good for getting license plates (although it has to be a car-length close to you) and the 60 frames per sec is for fast-paced action. I'm planning to switch to a 360 camera with 3rd person mount in the future but have to decide between GoPro Max or Insta360 and find out about battery range, mount options, etc.
I did some road study (i.e. just circling a block or whatever and flowing with traffic to see what happens) and find out that before an intersectional right turn, if you inch left (or center) within the right lane at a light, you are less likely to be breezed by an impatient car using your lane as you are executing a right turn. If you are planning to go straight in an intersection, take the lane (move over to the left side of the right lane) so right-turning cars have to go by your right side instead of turning into your left side. Unfortunately, some cars don't understand this move--I've been honked by a right-turner behind me as I was on the left side of its lane, despite clearance.
Honestly I ride half in the bike lane and half in the street. For lights, do you have an e-assist battery you can tap into for power? For bells, too you could just at a 12v car horn, or you could just buy this: https://www.amazon.com/Electric-Electronic-Bicycle-Waterproof-Rechargeable/dp/B07DCVN728
I can't help you with a camera.
I have this one https://www.amazon.com/Lixada-Bicycle-Handle-Armrest-Accessory/dp/B07P6ZVR8B/
its not fancy or anything but works fine.
Nice approach
I use the wheelie bins with a old roof rack as a cross bar between then. I then put the saddle on cross bar and remove the back wheel
The bin is like -
this rack fits topeak's babysat ii, if that's an option for you. here's the amazon link: https://www.amazon.com/Topeak-Babyseat-Disc-Mount-Rack/dp/B00P26GTRU/. there's a version that comes without the rack for slightly less.
otherwise, the Thule yepp series of bike seats mount directly onto racks. to clarify, there is the older "yepp maxi" that have holes in the seats and the similar yet different "yepp nexxt maxi" that fits on a different type of rack. they are not interchangeable systems, unfortunately. for each style, they sell the compatible racks separately.
I bought two yepp maxis for my girls to ride on cargo bike recently. I'm happy to pass along my learnings if you'd like.
I figure I can mount some poles on the corners and strap down a small shade sail or garden shade mesh. And then watch out for strong winds!
This is the kit I have bought twice for both of my bullitts:
https://www.amazon.com/gp/product/B01C6QZ2US/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&th=1
I did not buy the battery from Amazon. I have had better luck buying them from Craigslist. Better pricepoints.
I installed a FollowMe Tandem - Parent-Child Bicycle Coupling https://www.amazon.com/dp/B007ABVE4I/ref=cm_sw_r_cp_api_i_WAJ02XX6G9ZEYFQ3X8BR on my Larry vs Harry cargo bike. My elder daughter is now 10 and has been riding a 26” two wheeler for a few years but her stamina is still building for anything more than 6 miles. I love the FollowMe because it keeps her pedaling if she wants, and also it takes only a minute to take on and off. We use it for morning bike to school every morning as well.
Talk to building management and see if you can bolt one of these to the ground on the side of the building somewhere. Bonus points if you have a rack nearby the bike sould also be locked to.
Mophorn Motorcycle Shelter Shed Strong Frame Motorbike Garage Waterproof 106.3"x 41.3"x 61" Motorbike Cover Tent Scooter Shelter 120055 Hoods for Vehicles https://www.amazon.com/dp/B01MZHB22O/ref=cm_sw_r_awdo_1B168Q3623TSJ5ZHFFT2
In Europe UA sell these L tracks. I imagine a beefy Velcro strap tied to it on the floor, going over the edge of box would work. Obviously you have to be okay with the pedal of the bike rubbing against the box.
If you got access to drill press and a hack saw you can make your own. The frame floor bolt on UA are 7.5 inches apart. Those Amazon rail bolt holes are 6 inches apart.
Pit Posse Heavy-Duty Aluminum S... https://www.amazon.com/dp/B01HHB79Q2?ref=ppx_pop_mob_ap_share
For our GSD S10, the most useful accessory to date has been a CleverMade collapsible shopping basket that fits perfectly on/in the Transporteur front rack and I secure with a small cargo net. It's super handy for quick trips into the store, or I can just dump loose items in there when riding. If it's empty or I need to put something on the front that is bigger than the basket itself it just collapses down to a small footprint right in place on the rack.
I used this: https://www.amazon.com/gp/product/B07QRRZ1M6/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1
Didn't have any problem with it slipping.
You could also probably work around the slipping by jamming another piece of material in the slot.
I drive a Mini Cooper and I just bought a tray style hitch mounted bike rack. I read the product measurements to ensure it fit the wheelbase of my longtail cargo bike. It does stick out a bit on each side and there might be legal issues with that. It's within the legal width (8.5ft in most states), but sticks out from the sides of the car too far (no more than 6" in most states). But it is doable and the only way I can transport my bike anywhere I can't ride. Keep in mind that if you go this route, you'll want to make sure your taillights aren't obstructed. I have to take the cargo racks/bags off my bike to keep my lights from being blocked.
I wish more bikes had this type of front rack mount option. Mounting it to the head tube instead of the forks makes steering, even with a heavy load, just as easy as without a load.
I've keep a Deroos 14 Liter cooler , which fits perfectly with the tie-downs, mounted on mine and can fill it with drinks and ice and forget it's even on there when I ride.
Enjoy your Benno!
- Rain poncho that goes over handlebars is an option that gives lots of ventilation from underneath.
- Enviolo hub for zero maintenance and no rusting
- Gates belt drive for zero rust and low maintenance.
It is the PK-92V
PK-92V: Large Rigid Heavy Duty Food Delivery Box for Motorcycle, Top Loading, 18" L x 18" W x 18" H https://www.amazon.com/dp/B01ICNT5HA/ref=cm_sw_r_apan_glt_i_8HFM8BC53282T4WY677K?_encoding=UTF8&psc=1
I'd suggest a bakfiets with a large box and an extra battery (e.g., WorkCycles Kr8 MAD, Riese & Müller Load or Packster, Bullitt, Urban Arrow), paired with these panniers.
nice! how long have you had it? how are you liking it?
i’ll let you know how it goes, i’m putting them on tomorrow. it should go smoothly but you never know. the bags, if you’re curious.
i also really like having the mirrors mounted to the front rack as opposed to the handlebars. since the rack doesn’t turn the mirrors are a lot steadier. it’s a goofy, but cool look i think.
Move the heaviest one to something like a UrRider. I did have to get pedal extenders though, because my knees kept hitting him.
Bike Friday has a seat cushion https://store.bikefriday.com/product_info.php?products_id=19127
And Amazon has these things, although I'm not sure if they're meant for adults https://www.amazon.com/Lixada-Bicycle-Leather-Cushion-Children/dp/B06XKFMPRR/
Something like these: https://www.amazon.co.uk/Teguangmei-Rechargeable-Waterproof-Cycling-Decoration/dp/B07X87R5DT/ref=mp_s_a_1_6?keywords=bike+hub+wheel+lights&qid=1640712181&sr=8-6
They all look the same on Amazon, and the set I got were less than £15 for 2. Usb rechargeable and light us up like a Christmas tree once it gets a bit dark.
They only fit the front wheel hubs, but I'm planning a spoke mounted light for the back wheel too, just because of how effective the others are at making us seen.
I’ve been using this one for a while and seems to be doing a good job. Kotivie Tandem Bicycle Cover Extra Long Bike Storage Cover 2 Seater Trailer Bike Cover Waterproof Sun Protection https://www.amazon.com/dp/B07CKFVKFV/ref=cm_sw_r_cp_api_glt_fabc_VS238BAFJPB64MYV5D4Y?_encoding=UTF8&psc=1
If it's anything like the spicy curry, it's held in place with button springs (I'm not entirely sure what they're called, here's an Amazon link for a visual). The running boards have posts that insert into the frame receptacles, and the button springs keep it captive.
Barr Mitts brand can be had at Amazon. I have used these on my Aventura and bought a pair for my Load after a quick test fit.
They have models with and without holes for bar-end accessories. Since I have bar-end mirrors. I get these: https://smile.amazon.com/dp/B009FA06TQ?psc=1&ref=ppx_yo2_dt_b_product_details
They also have fleece-lined available, but it does get quite that cold here. I love these for rain and cold because I can wear lighter gloves for better feel.
I've had this happen to me. I solved it with one of those crappy derailleur guards that you find on Walmart bikes. Except I installed mine on one of the nearby free bolts, not the skewer.
Something like this: https://smile.amazon.com/Mantain-Derailleur-Protector-Universal-Mountain/dp/B07P9L43ZR
Oh, can answer this exactly. We also had to store our Load 75 outside for 10 months - we found that a 104" motorcycle cover works perfectly.
We got this model (but in silver... figured it would get less hot underneath in the sun) and it worked fine: https://www.amazon.com/gp/product/B07LCCZ9VW
I have the XXXL (very long bike) version of this:
https://www.amazon.com/dp/B01EQVC1SW
Works well in SoCal, but I really only need it to shield from UV and bird droppings, probably would want something more substantial for more rainy weather.
Bonus benefit to the trim: Will keep moisture out of the plywood seams... those panels are going to last years longer with the trim.
Not sure how much it'll do for kid impact though. I've seen some cut pool noodles in half for that purpose.
​
Clip one of these onto side of handlebar.
Acouple of these for the kiddos (mount to side wood panels)
​
And... electric kit??? You'll ride it further and use it more with some assist.
Well there’s no lack of handlebar space on your bike that’s for sure! I’m happy with the model I’ve linked below, but I’m not sure if it’s good for vertical handlebar orientation. I’d recommend dropping by the nearest bike store and seeing what options they have.
I got a garage mate, no more need for a garage door opener. I had to re-do the connection once after first config, not sure why (power outage?) but worked fine since.
I have been tempted for get monkey lights for my commuter.
I have really good front/rear visibility, but side visibility could use some help. Taillight tosses some light. I have 3m reflective on some parts.
I would love some side markers like this
But those seem crazy high price for what they are.
I got these off of eBay for $15 a few years ago and have been using them in my commuter. Similar to another poster, I got a different brand, but the pedal is identical
I have a Tern Pack Rack that I zipped tied with an inexpensive rack from Amazon. It’s been perfect for me thus far: https://www.amazon.com/Hoobbii-Waterproof-Bicycle-Adjustable-Rainproof/dp/B083DYQC4C
If you dont want to lay it down on the side, just get a two ended tube. With one of those its possible to fix a flat without removing the back wheeI. I always have one in the box with me on longer trips after getting my first flat:
This rack should work. I’ve been trying to figure this out for my Spicy Curry and it’s the best Option I’ve found. This is the other option that comes up regularly. Haven’t used either personally.
We went really cheap: https://www.amazon.com/dp/B08LZ3NP8T/ref=cm_sw_r_cp_awdb_imm_t1_J042J4K1XPH4ZSSQXB0K
My oldest, now riding on his own, doesn’t like goggles, and I will often give my Bolles to my youngest on rough days (and just wear sunglasses for myself).
It's been great! The dowels are 1-1/8" diameter which seem to be sufficiently strong but between them/the metal frame/the seat itself, our 6 month old has started asleep despite some decent bumps. I used this card seat adapter: https://www.amazon.com/dp/B01N3L7HSH/ref=cm_sw_r_cp_apap_BlADg83rMAjbH. feel free to dm and I'll tell you what I can.
No the strap didn't rip, the plastic buckle on the harness completely shattered, this is the trailer I have and I am honestly not crazy about it anyway https://www.amazon.com/dp/B01B3OO4Z8/ref=cm_sw_r_cp_apa_fabc_nXAPFbDZ16292
You are so lucky to be in Europe! It seemed so much more bike friendly.
Reelight are my solution for that. A magnet on the spokes and the light screwed in at the axel. https://www.amazon.com/dp/B001PLEIBU/ $50
Now I also have a SON and Sinewave Beacon. https://www.sinewavecycles.com/products/sinewave-cycles-beacon $$$
I have two mirrors on the front of the cargo box. Works very well and get a few compliments since they look vintage.
https://www.amazon.ca/gp/product/B07YFVGGFC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I got one of these weather covers: https://www.amazon.com/Bike-child-seat-rain-cover/dp/B00TSABH4G/ref=sr_1_3?ie=UTF8&qid=1538919413&sr=8-3&keywords=maruto+bike+seat+cover, but its made for a different brand of seat that is shapped a little differently than the Yepp. So I made a frame out of PVC pipe and attached it to the seat. I have a pdf of the directions on how to make the frame, but I am not sure where a good place to host a PDF would be?