What are /r/Danieldefense's favorite Products & Services?

From 3.5 billion Reddit comments

Any gun cleaner will take it off no problem. If you really worry about it, they sell a Deflector Brake Kit on Amazon, but like others have said, it's not necessary as it's a tool and will have wear marks when used.

I had a similar issue with my MK18 which basically has the same rail. I resolved it by loosening the 6 bolts that attach the rail and then sliding a pic rail vice block on the top rail to bridge the receiver and hand guard and ensure they were aligned properly.

Link to the pic rail vice block:

https://www.amazon.com/NO-M-R-Universal-Multipurpose-weaver/dp/B014LPNZJ2

I then torqued the rail bolts down in a star pattern. I believe I used a 30 inch pound torque limiter and some blue loctite.

I don’t think it would impact the function of the rifle but if you install iron sights, it may give you an issue. I discovered my rail was off center because I had to max out my rear sight windage in order to get a zero at 50 yards.

I had a similar issue with my MK18 which basically has the same rail. I resolved it by loosening the 6 bolts that attach the rail and then sliding a pic rail vice block on the top rail to bridge the receiver and hand guard and ensure they were aligned properly.

Link to the pic rail vice block:

https://www.amazon.com/NO-M-R-Universal-Multipurpose-weaver/dp/B014LPNZJ2

I then torqued the rail bolts down in a star pattern. I believe I used a 30 inch pound torque limiter and some blue loctite.

I don’t think it would impact the function of the rifle but if you install iron sights, it may give you an issue. I discovered my rail was off center because I had to max out my rear sight windage in order to get a zero at 50 yards.

Yeah so the QD will mount right onto the little circles you see in the handguard, and on it it will have a sling mount. Or you can just get a sling mount to attach onto the MLOK, instead of the little circles on the hand guard.

This is what the QD looks like

https://www.amazon.com/Magpul-QD-Quick-Disconnect-Sling-Swivel/dp/B00HKBSQ26

https://www.amazon.com/GEAR-AID-Self-Cling-Camouflage-19550/dp/B0016SBCM0/ref=mp_s_a_1_3?crid=HLQJBJ2JWI2K&keywords=gear%2Baid%2Bcamo%2Bform&qid=1652199044&sprefix=gear%2Baid%2Bcam%2Caps%2C174&sr=8-3&th=1&psc=1

I got same product but in woodland digital for my scope, it’s nice. Also it’s reusable I believe

thanks! bag is savior , big fan. lots of space for mags, tools, first aid, eye/ear pro, whatever. this one is the 36", i also have 42" for my AK and 16" AR. also have one of their pistol cases, savior makes good stuff.

Bondhus 20199 Balldriver L-Wrench DoublePK, 10999 1.5-10mm & 10937 0.050-3/8" https://www.amazon.com/dp/B00012Y38W/ref=cm_sw_r_cp_api_glt_fabc_69H0D19SC35RSM61YTB8 that’s what I bought. Don’t remember the exact size that fits but it’s one of em lol

BOG Pod

Amazon has them on sale right now

BOG DeathGrip Aluminum Tripod with Durable, Lightweight, Stable Design, Bubble Level and Hands-Free Operation for Hunting, Shooting and Outdoors, Black, Maximum Height: 72" https://www.amazon.com/dp/B07KMPCVMH/ref=cm_sw_r_cp_api_glt_fabc_8ZWX3JGVV8P1W97KJKRZ

Could you fact check this specific brand.

Accmor 2 Point Rifle Gun Sling, Two Points Traditional Sling Standard Strap with QD Swivels for Sports and Outdoors https://www.amazon.com/dp/B08FC8X8D1/ref=cm_sw_r_cp_api_glt_fabc_SV6QK85QGXWREX8TX04W

Would that include all the hardware I’d need out of the box to run the sling?

Just shopping around they didn’t have any slings in stock at the shop when I picked it up today so I’m just gonna shop for a quality deal.

I’ve heard magpuls hardware isn’t the best? This is all anecdotal I have no personal experience with them yet.

Hey brother. I’ve done confused myself.

So basically I need to order for example that accmor Amazon link and this right here?

Daniel Defense Rail Mount QD Point Sling Swivel, Picatinny Rail - 03-021-30029 https://www.amazon.com/dp/B001AQPUSA/ref=cm_sw_r_cp_api_glt_fabc_Z54DJZJVFEEX8KB9F8P6

Aluminum Black will do it. Small/fine paint brush, put a little glassy film on, put it in the sun, after it has been warm in the sun for a bit, wide off the excess. Brand new again. https://www.amazon.com/gp/product/B002JCW2CG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Just removed mine a couple hours ago.

Used a 45-52 hook spanner.

The exact one I used came with a drill chuck I picked up for my mill. You can see it in the pictures on the Amazon link below. I would assume any spanner of the same size would work. I would be most concerned with the shape of the hook to ensure proper engagement.

https://www.amazon.com/dp/B07V259Q54/ref=cm_sw_r_cp_apa_fabc_9xS6Fb4JVX6RQ?_encoding=UTF8&psc=1

Put the barrel in a vice using a real avid lug-lok. Barrel pointing to the left, pulled towards me with the spanner. Took a small effort but no slipping of the wrench. Loosened right up.

Had my trash panda suppressor installed an hour later.