What are
/r/DodgeRam's
favorite Products & Services?
From 3.5 billion Reddit comments
The most popular Products mentioned in /r/DodgeRam:
The most popular reviews in /r/DodgeRam:
I got this:
https://smile.amazon.com/gp/product/B000NCOKV0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
For my '97 3500 with Cummins and two batteries. I have it on the truck right now (it is cold, I rarely drive the truck and it has some kind of parasitic draw that drains the batteries in a month or two).
I tried a tender for a single battery and it did not work well with two batteries even though they are connected in parallel.
BTW - I picked up a bunch of these combo heat shrink low temp solder connections and they seem to work ok.
https://smile.amazon.com/dp/B0B4W749G2?ref=ppx_yo2ov_dt_b_product_details&th=1
I was questioning whether they would work ok with my cheap HF heat gun, but they did work. The solder did melt somewhat into the wires (there was still a visible ring - maybe I need to apply more heat?) and the plastic heat shrink didn't burn when the solder melted. We'll see how they work long term, but I think this will be superior to crimp style connectors, which I have had work loose over time. I may crimp the remaining solder ring too - probably can't hurt.
This is exactly what I got:
https://smile.amazon.com/dp/B08HV68RSJ?ref=ppx_yo2ov_dt_b_product_details&th=1
My hitch receiver tube is one I bought and had it welded to the frame. I can wrap safety chains around the frame tube the receiver is welded to.
Sounds like a clogged cowl drain. I used these https://smile.amazon.com/gp/product/B08MQCNTQY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 and a drill to clean my jeeps back in the day. Took a bit of time and elbow grease but eventually a bunch of mud and debris came out and no more leaking into the cabin.
I know this is late, but these rubber wrenches work well and will not cave in the filter.
fremr Adjustable Rubber Strap Wrench Plumbing Heavy Duty Set, Strap Oil Wrench Filter Use as Jar Opener Pipe Plumber Wrench Strap 2 Pcs https://www.amazon.com/dp/B09TRC6ZVM/ref=cm_sw_r_apan_i_VPHJBHVD3KFQPYBSGNQE?_encoding=UTF8&psc=1
Got these for my Ram and they are pretty good. They seem to stand up to liquids and are easy to remove and install. Had them about 6 months and they have held up good. https://www.amazon.com/dp/B08ZSPTLWQ?ref=ppx_pop_mob_ap_share
Hey my friend. Fellow 3rd gen owner with led headlights. I have your fix.
For your headlights:
For your foglights:
These will be plug and play and correct your issue. One end goes to your factory harness, the other to your LED bulb. Please update me if you order on pictures of how they look, satisfaction guaranteed! Hope this helps!
I stuck some AVS in channel ones in mine a couple years ago, and they've held up. I've never really had an issue with any of them on my previous trucks. I know they can get brittle over time.
MACHSWON Car Front and Rear reversing Radar kit, led Buzzer Alarm 8 Sensor Front and Rear Parking Sensor Prompt https://www.amazon.com/dp/B08NVLTY3C/ref=cm_sw_r_cp_api_glt_fabc_CT43Q6M8P9MTFP84GCVK?_encoding=UTF8&psc=1
Try locating the main module, start by unplugging each sensor…could be one is out.
this is the muffler i put on my 14 5.7. not much louder than stock when idling, but nice deep rumble when accelerating. and it was pretty cheap!
I can send the base but I did a custom cut out and insert of the ram so it would light up.
If your truck has factory navigation (ie. Double din) it should fit perfectly. If not you can easily install a double din dash kit like this SLATE GREY Black and Silver Aftermarket Stereo Radio Double Din Dash Install Kit Compatible with Dodge Ram 2006 2007 2008 2009 https://www.amazon.com/dp/B01MQH8PK1/ref=cm_sw_r_cp_apa_glt_i_2WCC63SR55ZB7R904DNS?_encoding=UTF8&psc=1
Not sure what year you have, but I've actually been eyeballing This rear step for my 2013. Haven't purchase yet, so I don't have any personal experience with it.
Just put a new fuse in, unfortunately one was blown (cavity 40). Not sure why I cannot find my switched hot. I'm gonna meter it out tomorrow hopefully. If it comes down to it again, I'm gonna try and splice off of the cigarette lighter again. I put in this android head unit: https://www.amazon.com/dp/B07WV34MFR?ref=ppx_pop_mob_ap_share
Sorry it took so long, but finally got the Dodge Ram Generations poster listed for sale on Amazon here. https://www.amazon.com/dp/B08HW5NBF1 If you’re interested in getting 40% off the poster, I have an early reviewer program for anyone who is willing to leave a review after receiving the print. Send me a message if you’re interested and I can provide the full details. I’ll also send you a DM in case you miss this.
Haha thanks man!! Akkon's off Amazon. The grill is AEG(I think?) I had to sand and color match it using Duplicolor, it came in a slate gray color.
E-Autogrilles https://www.amazon.com/dp/B07BFSTGWD?ref=ppx_pop_mob_ap_share
For 2006-2008 Dodge RAM 1500 &... https://www.amazon.com/dp/B07DGM8VQ8?ref=ppx_pop_mob_ap_share
Pretty sure they are 6x9’s. If you have any doubts... the door panels come off very easy. 1 bolt on the door handle and a few screws on the bottom the the door. Then lift. Just watch the window/lock panel wiring harness before you disconnect it.
I just replaced the front speakers in my 2005 extended cab a few weeks ago. The magnets had fallen out completely.
I put some Kenwood 3-ways in. For under $40 for the pair, the sound is noticeably better than the ones in the back doors. May swap those out soon too.
https://www.amazon.com/Kenwood-Automotive-speaker-3-way-KFC6966S/dp/B07B6FP8PW
The fit’s not quite right. Just use longer screws... there’s plenty of room between the door panels and metal for them.
Quick Google search:
New Version LED Fog Light for Dodge Ram 1500 2002-2008 Dodge Ram 2500/3500 Pickup Truck 2003 2004 2005 2006 2007 2008 2009-1 Pair Black
https://www.amazon.com/dp/B07J52FX5K/ref=cm_sw_r_cp_apa_i_3qaECbQA9PTYF
I bought these for my 2018 Night because the stock carpet ones were going to be impossible to keep clean.
Husky Liners Front & 2nd Seat Floor Liners Fits 09-18 Ram 1500 Crew Cab https://www.amazon.com/dp/B008M1WB7E/ref=cm_sw_r_other_apa_RK6RBbZ6BQPT8
They fit perfect with great coverage. And they have a ridge to prevent water from snow or mud from draining off of them onto the carpet.
Haven't tried that one but the one I got was 3' and I love it.
Supreme Suspensions - Ram Lift Kit 3" Front Suspension Lift CNC Machined T6 Aircraft Billet + 2" Rear Suspension Lift CNC Machined T6 Aircraft Billet Dodge Ram 1500 Leveling Kit 4WD 4x4 (Black) PRO https://www.amazon.com/dp/B00IAZ4MDS/ref=cm_sw_r_cp_apa_Wdfqzb44QTN2H
No problem, and let me know how it goes for you. Maybe there's something else you can try. I bought one of these OBD2 scanners off of Amazon to check engine codes - links with your smartphone. It's inexpensive and has come in handy several times.
For anyone needing help with an older truck, the plastic bumpers, mirrors, and trim can be restored with "Mothers Back to Black" from Advanced auto (only the bumpers have it on them in the pic). I found the heavy duty clear gel does a better job on the trim, mirrors and door handles. Stuff is amazing.
There are two ways to do this:
- Go aftermarket
- Go '08.5 model T setup
The aftermarket kits consist of DOM tubing and have threaded heim joints on each end. Some will require drilling out the steering knuckle, others will not. This is the best option available, but also the most expensive.
The '08.5+ setup uses the 2008.5 and newer setup. This is a OEM install but can still have some problems. 03-08 steering kit generally runs around $300.
You will also benefit from a steering gear box brace (whether stock or big tires) but if you run big tires a brace is a MUST in order to preserve you steering gear box.