Tail as turn from diode dynamics and use all the LED’s
Not too sure how well that one works, but I use this one in my 09 and it works flawlessly with excellent audio quality and is half the price.
DYTesa Bluetooth 5.0 Audio... https://www.amazon.com/dp/B08F7J66RC?ref=ppx_pop_mob_ap_share
Here it is setup in the center console. The cigarette lighter adapter has 2 outlets so it can power the Bluetooth and still have room for a phone charger as well.
For 2010-2013 G37/G25 2015 Q40 Sedan New Exclusive LED Sequential LED Signal Tube Projector Headlights https://www.amazon.com/dp/B07K4VNKHJ/ref=cm_sw_r_cp_api_glt_fabc_7KW9HYH5D4W6CKVK2H2G?_encoding=UTF8&psc=1
I had the same problem. My solutions was buying these. And using copper rtv to hold them in place on the center of a normal exhaust gasket. Then when you toque down the nuts and bolts. These rings will get smashed and seal.
Diode Dynamics Tail as Turn LED Module compatible with Infiniti G37 Sedan 2009-2013 https://www.amazon.com/dp/B085B9GKLQ/ref=cm_sw_r_cp_api_glt_fabc_C12YKZ3DEYVJCVGNGDF4?_encoding=UTF8&psc=1
Slightly cheaper on Amazon
They are custom lamps. I actually ordered them from amazon. Arrived in 2 days, perfect fitment, not to difficult to install. 10/10 would recommend
For 2008-2015 G37 / Q60 Coupe... https://www.amazon.com/dp/B078J688N1?ref=yo_pop_ma_swf
Should be these...but double check the dimensions before you order. These were just the first ones that came up when I searched. https://www.amazon.com/dp/B074P2NH57/ref=cm_sw_r_cp_apa_i_vkvuFbSKSWX4E
Get a pair of these. They are long enough to grab a hold of the grommet. It’s a pain in the ass but doable. Do both driver and passenger sides if I were you and just look on YT. It’s a common issue, just like the door actuators
I have this on my car, I have two vehicles and sometimes I don’t drive my infinti for a week or two so I’ll throw this on the day before I drive it and works well and is fairly cheap, until you can find a longer term solution
If you can find somewhere to put it, it’s low key kinda nice. I have mine near my right leg on the left side of the center console.
iOttie Easy One Touch 5 Dashboard... https://www.amazon.com/dp/B0875RKTQF?ref=ppx_pop_mob_ap_share
$35 on Amazon for a pair & glass lens:
Then this is exactly what you need! Within a week of buying my G I was already looking for ways to fix the pedal delay. I cannot stand electronic pedals for this reason, I have not driven a car with a good example of it.
This is the one that I bought. I didn't realize how much more expensive it was, it was just the only one I knew about. Reading the description of the one you posted, it looks like it has a lot of different modes and features outside of just adjusting throttle sensitivity. I know nothing about any of that, but I do like that the one I have can be controlled with my phone so I can eventually hide the unit in the dash when I stop being lazy lol
​
It replaces your XM radio with bluetooth, I have this and use it, I dont mind it, you change music with the "tune" knob on your console, its cool, it definitely beats plugging my phone in and doing shit the hard way
I got this one. Easy install + perfect fit
please dont buy another plastic one, buy the dorman metal one instead
https://www.amazon.com/dp/B000DEMKTW?psc=1&ref=ppx_yo2ov_dt_b_product_details
its a connector for heater core inlet, and outlet from motor, id recommend replacing the hoses too
Universal off Amazon. I bought it on a whim but I can honestly say I've got non stop compliments on it. Best diffuser under $20 that I've seen. I didn't use the 3M tape it came with, just 5 screws.
Here's the link Diffuser
I just went the cheap hardwired aux route with this cable for my pixel 6 pro and run the cable out of the armrest. https://www.amazon.com/dp/B077SRPPXY/ref=cm_sw_r_apan_i_F95DRDZBXGTTKNQNJ4T9?_encoding=UTF8&psc=1
If you want a kit to buy that has everything you need, I’d suggest the sylvania headlight restoration kit on Amazon for like 20-30 bucks (here), comes with everything you need, except elbow grease
Bluetooth FM Transmitter for Car, 5.0 Wireless Bluetooth FM Radio Adapter Music Player /Car Kit and 2 USB Ports Charger Support USB Drive https://www.amazon.com/dp/B07F2RTN5Z/ref=cm_sw_r_cp_api_i_2GHZG0F6FEPVGQ1ZVVYM
This is the one I have 100% worth it
Rosie Decals Band-Aid Dent JDM Japanese Die Cut Vinyl Decal Sticker For Car Truck Motorcycle Window Bumper Wall Decor Size- [6 inch/15 cm] Wide Color- Gloss Black https://www.amazon.com/dp/B0721YRP79/ref=cm_sw_r_apan_i_1Z4H767JSX4MD03DZXFY
The cabin air filter replacement is super easy and should only take a matter of 20 mins or so (at least when I did it lol). I got EP Auto’s cabin air filter, as it had activated carbon as well as baking soda in combination with 3 stage filtration, and it was about $10.
EPAuto CP743 (CF10743) Replacement for Chrysler/Dodge/Infiniti/Nissan/Volkswagen Premium Cabin Air Filter includes Activated Carbon https://www.amazon.com/dp/B07FHK3G5S/ref=cm_sw_r_cp_api_i_26Z6FB1JCDA5ZPRGQMJW?_encoding=UTF8&psc=1
Vibrant 1142 3" Ultra Quiet Resonator https://www.amazon.com/dp/B001806YE2/ref=cm_sw_r_awdo_TSGTZYS67CZ00YSYQJH6?psc=1
Their is videos online that show the before and after. It will reduce most of your rasp and give it a deeper tone.
Nevermind apparently the one I got does work but not sure why it didn't work for mine Bovee tune2air Bluetooth Car Kit for Audi, VW, MB - Music Interface Adaptor for in car iPod Integration (WMA3000A AMI/MDI/MMI Connector) https://www.amazon.com/dp/B00R2HZ1XU/ref=cm_sw_r_apan_i_JMN5XS2CCQPC2E1ZXJXM?_encoding=UTF8&psc=1
CoolStream Duo Bluetooth Adapter Receiver for 30 Pin Bose Sounddock and Motorcycle Cables for Wireless Music Streaming https://www.amazon.com/dp/B00GHUHMUS/ref=cm_sw_r_apan_i_D7QAABSY621V32XZ2TWE?_encoding=UTF8&psc=1
This Airdual Bluetooth Adapter for BMW... https://www.amazon.ca/dp/B07RMK926C?ref=ppx_pop_mob_ap_share
And this Xtenzi Charging Converter 30 Pin... https://www.amazon.ca/dp/B00EH2O1W0?ref=ppx_pop_mob_ap_share
You need the iPod connector in your centre console plugged in and then you need to put a usb charger in the socket and then get a micro usb cable and you simply plug the charging converter into the cable that comes with your car plug in the micro usb cable into the side of the converter and plug the invery device into the converter and there you go.
Sorry for the weak explanation but I’m lazy rn lol. You need one song on Apple Music (if using iPhone) and you can play audio from any music app.
I ride on these things lol they’re mint and I drift with them on too only 100$ for a whole set didn’t cut any studs either. Made my stock 19s flush https://www.amazon.ca/dp/B08131B5W8?ref=ppx_pop_mob_ap_share
ICBEAMER Black Universal Front Aluminum Bumper License Plate Mount Relocator Frame Bracket Holder Bar [Drilling Require] https://www.amazon.com/dp/B07HCWQ319/ref=cm_sw_r_cp_api_glt_i_VG6VN1NRS1F89JWZTEBT?_encoding=UTF8&psc=1
thank me later. trust me this 100000% worth it, after i destroyed my tow hook one i switched to this and never looked back at my ricer cringy mistake
On the Bose amp under that plastic cover in the rear, you'll find a couple of connectors.
You're specifically looking for b42(though you could tap any, b42 is the easiest two get two channels from). Pins 1,2,3,4 are your line level signals. Pin 1 goes to RCA(left) positive, pin 2 RCA(left) negative; pin 3 goes to RCA(right) negative, pin 4 goes to RCA(right) positive.
To hook these up you should solder, but you could just use lollipop RCA connectors and wire.
I've heard good things about these
These
Flexible Hose Clamp Pliers - 24" Heavy Duty Cable Flexes for Use in Any Position - for 18mm-54mm Hose Clamps https://www.amazon.com/dp/B08H23HFKC/ref=cm_sw_r_apan_glt_i_4M6MZ7KYXX336DA1MEB5?_encoding=UTF8&psc=1
And these make short work of those clamps.
Hose Clamp Plier Auto Repair Tool Swivel Flat Band for Removal and Installation of Ring-Type or Flat-Band Hose Clamps https://www.amazon.com/dp/B07CR6BN2Y/ref=cm_sw_r_apan_glt_i_R8MK9CEG59ZE0F3MNYAB
Alternative to splicing into the amp wires is you can use one of these Kicker Sterio Line output converters and splice into the factory subs behind the rear seats. That's how I went about it on my vert and works well.
https://www.amazon.com/dp/B01D2M4E8Q/ref=cm_sw_r_cp_api_glt_fabc_19MAWZ807AKV1N8QSZQ2?psc=1
While you have the steering wheel taken apart, it’s a good idea to paint or wrap the trim bezel before it gets worse imo
idk about running a sub off the stock amp, little under powered to drive it IMO. I bought one of these, tapped into speakers behind the rear seat (vert) and ran to a 400watt amp https://www.amazon.com/Kicker-KISLOC-2-Channel-Speaker-Converter/dp/B00I4EF1BC/ref=sr\_1\_15?crid=2VG0H5U6GM2G2&keywords=kicker%2Bsub%2Bsplice%2Bkit&qid=1641356214&sprefix=kicker%2Bsub%2Bsplice%2Bki%2Caps%2C133&sr=8-15&th=1
Fuck I hate those. We use these at our shop to remove decals and burned up clear bras S SATC Decal Eraser Wheel 4 Inch Pin Stripe Removal Tool 1 Pack Adhesive Remover Wheel with Pad & Adapter Graphics Removal Tool Eraser Wheel Decal Remover https://smile.amazon.com/dp/B07ZNGPY8G/ref=cm_sw_r_apan_glt_fabc_EAVFKHTY22V66P71PVCP
I bought it off of somebody on Facebook but I believe it’s this one
Rolling Gears Real Carbon Fiber Trunk Spoiler Wing Compatible with 2008-2015 Infiniti G37 and Q60 Coupe (DN-Type) https://www.amazon.com/dp/B08PB752BS/ref=cm_sw_r_cp_api_glt_fabc_NQ80372DMK3BF35759DD
Here is what I use You can get this USB Bluetooth device that you put in your USB port. And then it connects to your phone via Bluetooth. Its called naxa. It works well. Like 98 percent well. Only main flaw is there is a delay from when you press play, it takes about 10 seconds to start. I have 2 of them 1 as a back up. It sounds wayyy better than the fm transmitter. Imo.
https://www.amazon.ca/Nab-4003-Bluetooth-Audio-Adapter-Connectors/dp/B00J4YU7II
I couldn’t find the one I bought a couple years ago but it shouldn’t matter on the model I bought. So if you search Bluetooth FM Transmitter for car on Amazon, you should get many different types of whatever preference you like. I linked one for example below:
(2021 Version) LENCENT FM Transmitter, Bluetooth FM Transmitter Wireless Radio Adapter Car Kit with Dual USB Charging Car Charger MP3 Player Support TF Card & USB Disk https://www.amazon.com/dp/B07VFT4D6B/ref=cm_sw_r_cp_api_glt_fabc_N4C9HTSR0QV61FPTBNYE
That is the problem. You can get an RCA to AUX but then you'll need a phone with an AUX connection. They're getting more uncommon every day. Other options include GROM Audio or TESLA style screens which can get expensive.
i have no ties to this car but
https://www.facebook.com/marketplace/item/2348258972095129/
at that price, even shipping it would be in your range
Will keep those throttle bodies nice and clean. I put some cheap Amazon catch cans on mine to help keep those tiny filters vleaner and keep junk from dripping onto the engine. Might look into them I used the ones linked below from Amazon
Good for wireless charging, vent mounted
andobil Wireless Car Charger, 10W Qi Fast Charging Auto Clamping Car Phone Charger Wireless Holder Dashboard Air Vent Phone Charger Mount Compatible for iPhone 13/13 Pro/13 Pro Max/12, Galaxy S21 More https://www.amazon.com/dp/B07WC1K755/ref=cm_sw_r_apan_glt_fabc_K0R2DMA492MZ4WE3NSJ3?_encoding=UTF8&psc=1
The Bestrix is the best of all magnetic phone holders: Amazon Link
I've gone through about 20-30 different phone holders of various kinds, not even exaggerating. Magnetic vent holders are the best unless you have and use wireless charging. A lot of the smaller magnetic holders lose grip of the vent over time, especially with heavy phones. Not so with this Bestrix one, it seriously has a strong grip on the vent and will not fall off.
The CD mount is too low to be used safely for GPS.
Possibly lol these are the ones I bought : LED Car Logo Lights Ghost Light Door Light Projector Welcome Accessories Emblem Lamp For Compatible FX37 FX50 G37 G25 Q50 Q60 M25 M35 M37 EX25 EX35 EX37 QX50 QX56 QX70 QX80 FX G M EX (2 Pack) https://www.amazon.com/dp/B08DTQD94N/ref=cm_sw_r_apan_glt_fabc_QQDMVZ4TVQAE58C3RDFS
i got these suckers and havent thought twice about it
https://www.amazon.com/gp/product/B003UUDD4C/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
CAI seems unnecessary but thats just my opinion
There’s a couple ways you could do it depending on the tools you have at your disposal.
Depending on how tight that bolt was installed, you could use set of “needle nose” vice grips and reach through the access hole and then turn it. However not everyone had vice grips let alone a narrow tip pair.
My second idea that comes to mind would be if you have an oscillating tool or one that you can borrow. Get a narrow blade like this and then basically turn it into a flat head bolt and use a large straight blade screwdriver and carefully remove it.
Another idea would be use a screw extraction kit . I’ve personally never used one on a security bolt before so I’m not sure how it would respond to the center pin on the head. I would assume you would just have to spend some time drilling down the security pin.
Last efforts would be to just drill it out. I would save this till last just cause it has the possibility of breaking or damaging other things the highest.
Much as i love them z1 is hella overpriced compared to what you can get piecemeal.
Remanufactured calipers 400 for all 4 corners A-Premium Brake Caliper Assembly Compatible with Nissan 370Z Infiniti G37 M37 M56 Q50 Q60 Q70 2009-2018 Front Left and Right 2-PC https://www.amazon.com/dp/B082MKCKY7/ref=cm_sw_r_cp_api_glt_fabc_9CAB1AJBP9MW84PDS0JJ
If you’re upgrading from the non sport brakes you’ll need pads and rotors and shorter banjo bolts with washers found here (https://conceptzperformance.com/technafit-banjo-bolt-w-washers-for-akebono-brembo-caliper-775-101sp-universal_p_13378.php)
Include a Brake line kit from z1, powder coating if you choose and an akebono logo can go from non sport to sport for around 800
Yup, you could buy a 3/4” heater hose connector at autozone for $5, 2 gallons of coolant for $20 each, and one of these funnels for $20
I have the DDPAI mini 3. If you look around it can be found for around $80. The camera quality is quite nice for the price and it’s small enough you can’t even see it behind the mirror. I have it wired in with an adapter that plugs into the mirror plug so there’s no visible wires.
Link to USB adapter
https://www.amazon.com/SimpleUSBPort-Mirror-Dashcam-Adapter-10-pin/dp/B07KZSBC54
i had heavy downpour here in va last night, you keep them on all the time, its been working really well since i put em on, ive been more at ease but i still stay careful, and try not to drive in heavy rains, but it has helped alot. AEM 769568 14007 Air Filter Wrap https://www.amazon.com/dp/B00353M11A/ref=cm_sw_r_cp_api_glt_fabc_BB0ZGC8XWY4VN4RS63VN?_encoding=UTF8&psc=1
I used alla lighting led bulbs. Been 2 years and still going bright. I’ll leave the link for them. You can’t go wrong either route, just preference.
Sure,
Bluetooth device: Airdual Bluetooth Adapter for BMW... https://www.amazon.ca/dp/B07RMK926C?ref=ppx_pop_mob_ap_share
Power adapter: Xtenzi Charging Converter 30 Pin... https://www.amazon.ca/dp/B00EH2O1W0?ref=ppx_pop_mob_ap_share
So these all hook up to the cable that would be in the centre console meant for playing music through an iPod. If you don’t have yours they can be found on eBay.
These items are on the pricier side but it’s so easy to install and hide, plus it works great.
unfortunately it looks like they've gone up in price since i bought mine about a year ago. This is the one i bought but its now over $200 https://www.amazon.com/MCARCAR-KIT-Spoiler-Infiniti-Duckbill/dp/B076LZP4TV/ref=sr_1_9?dchild=1&keywords=G37+Parts+Spoiler&qid=1632737427&sr=8-9
If you really look around you may be able to find it for cheaper
Never mind, I see that the other side of the harness is cut off and that is where the connector came from.
I will say that it is part of the engine harness. Look up part# 24011-3WJ0A and you'll see the end of of the harness is what is broken off.
As for where it is going? That brown, round, 2 pin connector looks likes the one off the steering rack but I could be wrong. Do you feel any difference in driving specifically in the steering aspect?
I'm in the same boat. I drive my lawn tractor more than my car. I throw a trickle charger on it once a month.
I have something like this and I'm happy with it.
I recently mounted my R3 to my mirror and tapped it in with this cable. I believe the R3 and DFR7 use the same power connector, so this should work for what you’re looking for. Only thing you don’t get with this solution is a hardwired mute button.
Same issue, just brought a 2009 g37 sedan without the navigation. You should have the rca plugs in the center armrest. Get this 3.5mm to 2-Male RCA Adapter Audio... https://www.amazon.com/dp/B088N6QX82?ref=ppx_pop_mob_ap_share Then if it's an iphone just get an adapter. I mean until I end up with a new head unit 15 bucks and I have music.
I tried out a few diff BT/FM devices... for $10 this one gave me the best sound quality and volume. I noticed a lot of the others I tried had very low volume.
https://www.amazon.com/dp/B078J7KYXB/ref=cm_sw_r_cp_apa_fabc_26FG6APQEMV2MQNAETW6
https://www.amazon.ca/USA-BT45-INFI-Bluetooth-2003-2012-Infiniti/dp/B00XUPP4TY
This connects to the XM cable in the trunk. apparently its decent. I might buy one soon.
Boove 1000 Canada link down here, if your in US I'm sorry. https://www.amazon.ca/dp/B00B52LLJ6/ref=cm_sw_r_cp_apa_i_X8QDEVSQTAZZWVP3C144?_encoding=UTF8&psc=1 I use it daily on my 09 g37x sedan. steering wheel controls work as well as everything. If you want more help just send me a dm. I'll tell you exactly how I did it and even send some pics.
Does yours have the ipod port in the center console cubby? Mine does, and this device does all but #4 on your list (although I have an android, with an iPhone it may work properly)
https://www.amazon.com/dp/B00B52LLJ6/ref=cm_sw_r_cp_apa_fabc_ABT0FbHWSBS7E?_encoding=UTF8&psc=1
https://www.amazon.ca/USA-BT45-INFI-Bluetooth-2003-2012-Infiniti/dp/B00XUPP4TY
I believe this should work well. im thinking about getting one myself
I use this plugged into the rca ports(they might've changed that to aux, I have an 08). I use a 2 plug usb cig plug like this to power it and charge my phone. Don't overcomplicate it.
There is a bovee "solution" for our car that uses the iPod plug but it never did work for me and drained me of like 80 bucks trying to get it to work right(just the bovee thing was like 50 or something)
RCA to 3.5mm Aux Cable (1.6ft), CableCreation
3.5mm Male to 2RCA Male Stereo Y Splitter RCA Cable for TV, Receiver,Car, Speakers and More https://www.amazon.com/dp/B06XFQNFSS/ref=cm_sw_r_cp_apip_dQ1Otis1pFQz2
This is what I use with a dongle since I have apple. My only complaints is the cord is short. But it works.
Hmm, I would take a look at getting a 30pin to Bluetooth adapter. I used one for an old Bluetooth speaker that I had a while ago, I noticed no difference in audio quality. Here's one from amazon. I haven't used this one specifically, but it does list the G37 as a compatible car, so it might be worth a shot. There are some companies like GROM or Phoenix Automotive that make full infotainment replacements if it really annoys you that much :).
I have a sedan not a coupe. But I bought a carbon fiber one off of amazon. I personally like it. The one I bough is this one but for the sedan. I would recommend it for a lower priced one. And the carbon fiber looks nice
They are the OEM ones for the 09 so they’re shaped a bit different then the newer g37’s. I also wrapped them with a hexagon pattern headlight tint that can be found here-https://www.amazon.com/dp/B07RN1MMFJ/ref=cm_sw_r_cp_api_i_7dDHFbYPXKSRW
I installed this three years ago. Hit lock three times and my car starts. Haven't really had any issues with it. Every now and then I have to do the lock procedure twice. Wasn't too difficult to install. Did it in an afternoon.
It worked great. Helps with swirls too. Not a complete paint correction tool, but did a great job width medium to light swirls. Finished it with their black ceramic spray wax. Takes a bit of effort but the results were worth it.
Turtle Wax 53448 Hybrid Solutions Ceramic Acrylic Black Polish https://www.amazon.com/dp/B085K86V9H/ref=cm_sw_r_cp_api_i_90KpFb4D7VGCK
Actually those aren't very flexible and it would be a pain to try and grab that if it's at a weird angle. I'd suggest this instead.
When my mom got her truck the very same thing happened to her and she had a bulb rattling around in there and I used this to fish it out, this will grab the bulb at the exposed connection and the bottom and make it easier without fiddling around too much.
I bought mine in an o' rellieys, so they might have one there you can buy on the spot instead waiting for Amazon.
legit ive been using this for 3 months and i love it better than having to deal with connecting your phone every time you get in bluetooth
Not sure for complete kits but you can buy things separate.
There’s other that I can send later. I know there are carbon fiber vented fenders and front splitter. Also Murrow covers as well.
As the other comment said, it's most likely a blown fuse, probably in the fuse block in the driver's footwell. I can't really tell you which it would be without knowing your specific model, but you might as well go through the fuses in that block and see which if any are blown. Sometimes it can be hard to check visually, so you can check for continuity with a multi-meter, if you have one.
Also, if you don't have any spare fuses left, these are the only ones I know that are the correct size.