What are /r/MT07's favorite Products & Services?

From 3.5 billion Reddit comments

I have the 19. This is the one I use. Works perfect.

MT07 2018 2019 2020 Motorcycle Radiator Grille Guard Protector Cover Aluminum Alloy for Yamaha MT07 MT-07 MT 07 2018 2019 2020(Black) https://www.amazon.com/dp/B08151M8Z1/ref=cm_sw_r_cp_apip_1HfXGtOxZHQKb

I used these on my 2020 MT-07....

https://www.amazon.com/dp/B071LHP5WP?ref=ppx_pop_mob_ap_share

AUXITO 194 LED Light Bulb 6000K White 168 2825 W5W T10 Wedge 24-SMD 3014 Chipsets LED Replacement Bulbs Error Free for Car Dome Map Door Courtesy License Plate Lights, Pack of 10

Nice and bright white

Hi! I have a 2020 and this one fits no problem! If you want to spend a lil more i recommend the red H4 7,000 Lumens by Auxbeam but this fit fine and is bright :) https://www.amazon.com/dp/B07BTTFN1S?ref=ppx_pop_mob_ap_share

MZS Short Brake Clutch Levers Compatible with Yamaha FZ-09 MT-09 SR 2014-2018| SCR950 2017-2018| XJ6 DIVERSION 2009-2015| XSR 700 ABS 2016-2019| XSR 900 ABS 2016-2019| XV 950 Racer 2016-2018 Blue https://www.amazon.com/dp/B01C5MQWSY/ref=cm_sw_r_cp_api_i_vvAgFbHAN3ZHZ

From Amazon believe it or not Amazon Bar End Mirrors Had to make some slight modifications to them but for the price I can’t complain.

I have a ‘21 with the orange wheels. They were kind of a bitch to keep clean, until I wiped them down with Cerakote Wipes. Now they rinse clean.

Penetrating oil will break loose any rust/corrosion. Can probably bust it loose with an Impact Screw Driver.

This oil enough? https://www.amazon.com/dp/B008QS9NEW/ref=cm_sw_r_apan_i_ME3WR32SVPHB4ER8SCZ2?_encoding=UTF8&psc=1

Can I pour into a measuring cup than funnel into bike?

This filter ok?

https://www.amazon.com/dp/B002306WNO/ref=cm_sw_r_apan_i_1XVT53NF5WSS7PV1N1HH?_encoding=UTF8&psc=1

Btw, my bike is 2022

I've had the same problem! I've still not found one and I'm currently still putting on padded shorts underneath my jeans!

A few years back when I had my triumph street triple, I ended up getting some custom made ear plugs made while I was at bike fest in Las Vegas. I’m not sure of the brand though. I’ve also been looking at these on Amazon

I went with one of these led's, works good it's been about 6 months with no issues.

https://www.amazon.com/BEAMTECH-Headlight-8000Lumens-Extremely-Conversion/dp/B06XHD78DQ?pd_rd_w=wyExR&content-id=amzn1.sym.94349326-ca8a-4b0d-94f0-6931485b8573&pf_rd_p=94349326-ca8a-4b0d-94f0-6931485b8573&pf_rd_r=QKJ5NC1T8RD2RDVRCNGE&a...

Thanks for the answer, a pretty sweet list to have noted.
Which sliders did you get? looking to get some, but don't know if i can really trust the amazon/china bait ones that appear here in EU.

Which tank grips did you get? i personally think these add a lot to the look of the bike.
https://www.amazon.de/-/en/dp/B09XJS1RYX/ref=sr_1_16?crid=610YXJETS4CU&keywords=tank+grip+mt07&qid=1653036533&sprefix=tank+grip+mt07%2Caps%2C73&sr=8-16 - been looking at these, but they're a bit pricy for 3 pieces of rubber imo.

ordering the screen protector ASAP, thanks! :D

Something like this should work.

TST fender eliminator and tail tidy! I also ordered their slider kit. Tank grips did a lot for me. These are the ones I ordered. LVOUP For Yamaha MT 07 MT07 MT-07 2021 - Side Fuel Tank pad Tank Pads Protector Stickers Decal Gas Knee Grip Traction Pad Tankpad 3 PCS, Black, 45 https://www.amazon.com/dp/B099K85VTR/ref=cm_sw_r_cp_api_i_KV3Z0D2D3N8Q6VVTVBVZ

Of course the first thing you need is an exhaust though ;). Ride safe

I bought these for my 2018 mt07.

https://www.amazon.com/gp/product/B07D7V5R2K/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&psc=1

I can't recommend them enough. These come with the bar ends so you don't need to buy anything else to install them. They are a little bit pricey, but I have dropped the bike twice hitting the mirror both times and they are fine.

Universal 8MM 10MM Clockwise Threaded Bolts Motorbike Bluish Reverse Side Mirrors, Motorcycle Mirrors Compatible with FZ07 FZ 09 FJ07 FJ09 FZ8 XSR900 https://www.amazon.com/dp/B07SJL52HX/ref=cm_sw_r_apan_i_V41K7EF9QKHKRQ562PJJ?_encoding=UTF8&psc=1

OES Frame Sliders Fork Sliders Rear Axle Sliders Yamaha FZ-07 FZ07 MT-07 2015 2016 2017 2018 2019 2020 2021 No Cut (Red) https://www.amazon.com/dp/B07GQ2ZYG3/ref=cm_sw_r_apan_i_XKY2YEEKZQK5S7SN9WY8?_encoding=UTF8&psc=1

Rear view Mirrors, Universal Motorcycle Motorbike Aluminum Alloy 7/8" 22mm Bar End Side Rearview Mirrors(Red) https://www.amazon.com/dp/B094NS5YR7/ref=cm_sw_r_apan_i_FAN7D8061KYD18VQT759

OES Frame Sliders Fork Sliders Rear Axle Sliders Yamaha FZ-07 FZ07 MT-07 2015 2016 2017 2018 2019 2020 2021 No Cut (Red) https://www.amazon.com/dp/B07GQ2ZYG3/ref=cm_sw_r_apan_i_TVJKZ3YSHAD78GEBFMAX?_encoding=UTF8&psc=1

https://www.ebay.com/itm/272920900494?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=bqCex4wPQda&sssrc=2349624&ssuid=uxH7zF_zTua&var=&widget_ver=artemis&media=COPY

Be sure that what u will order will fit your bike Because most “almost all” of them won’t fit without an adapter

Here is the adapter that i use on my bike

FENRIR Motorcycle Handlebar Bar End Mirror Adapter M16 For MT-07/MT09(before-2020)/MT10/MT01/MT125/XSR700/XSR900/Niken/TMAX/XMAX/FZ07/FZ09/FZ10/FZ1/FZ6//XJ6/XJR1300/XJR1200/VStar950/VStar1300/Stryker https://www.amazon.com/dp/B092VS9GMT/ref=cm_sw_r_cp_api_i_4ST30GBANX1GQB6G68JA?_encoding=UTF8&psc=1

And also here is the end bar mirrors

Blue Universal Motorcycle Mirrors Bar End Side Mirror Compatible with Honda Scooter Suzuki Yamaha Kawasaki Victory https://www.amazon.com/dp/B07WZT8RLP/ref=cm_sw_r_cp_api_i_NCMKEBTD83RA0H8RVWXX?_encoding=UTF8&psc=1

I recommendthis one, it’s the one I have, has great adjustment features for it to sit snug plus it’s made from a durable material and waterproof.

You need a bearing puller. I was the same as you couldn’t get my baffle out using anything. Using a friends bearing puller it popped right out.

This

Regular old battery tender brand does the job just fine. Used it for years. If you plan on getting a lithium battery buy a tender that can do both.

https://www.amazon.com/Battery-Tender-021-0128-Maintain-Damaging/dp/B00068XCQU

https://www.amazon.com/FENRIR-Aluminum-Motorcycle-Handlebar-Universal/dp/B08PP6CB73/ref=mp_s_a_1_5?crid=38M2BAOPJIF3R&keywords=fenrir+bar+end+mirror&qid=1641994475&sprefix=fenrir+b%2Caps%2C118&sr=8-5 You must buy the bar end adapter that’s down at bottom of the page . These make them fit perfectly and this is why some people had problems with loose fitting .

XtremeVision 35W AC Xenon HID Bundle with Slim AC Ballast (1 Pair) and H4 / 9003 4300K - 43K Bright Daylight Xenon Bulbs (1 Pair) https://www.amazon.com/dp/B07NCCLFJ9/ref=cm_sw_r_apan_glt_fabc_9NKKP0D9A55RE7M59Z4R?_encoding=UTF8&psc=1

Just make sure you don't touch the bulb when installing. If you do, wipe it clean with rubbing alcohol.

Thanks! I actually first saw them on this subreddit, where’s where to get them. For Yamaha MT 07 MT07 MT-07 2021 - Side Fuel Tank pad Tank Pads Protector Stickers Decal Gas Knee Grip Traction Pad Tankpad 3 PCS https://www.amazon.com.au/dp/B099K85VTR/ref=cm_sw_r_cp_api_glt_fabc_DW8DJE3PRJKF2V7FPJTV

There’s cheaper ones too out there on AliExpress

It’s this one:

Motorcycle Tail Bag Backpack Waterproof Luggage Bag Motorbike Saddle Bags Seat Bag Multifunctional PU Leather Bike Bag Sport Backpack (15 Liters) https://www.amazon.com/dp/B08G7ZKPDW/ref=cm_sw_r_cp_api_glt_fabc_JGVS9A3Z1YPFY72ZT8HZ?_encoding=UTF8&psc=1

Cheap, and may not last long, but it works.

Here you go For Yamaha MT 07 MT07 MT-07 2021 - Side Fuel Tank pad Tank Pads Protector Stickers Decal Gas Knee Grip Traction Pad Tankpad 3 PCS https://www.amazon.com/dp/B099K85VTR/ref=cm_sw_r_cp_api_glt_fabc_PP6CCR46KQ176AEZCW7X?_encoding=UTF8&psc=1

Buy this immediately I don't know about the throttle tube on a 2021 but most people put on an R6 throttle tube, I did, great mod for another $30 and 15 minutes worth of your time.

[Ehh, get this OEM knockoff for $30 from amazon.](https://www.amazon.com/Homyl-Motorcycle-Windshield-Deflector-Windscreen/dp/B09CLJSXKS/ref=sr\_1\_1?crid=32NGJU3O5M48B&dchild=1&keywords=Homyl+Motorcycle+Front+Windshield+Air+Flow+Wind+Deflector%2C+Windscreen+Protector%2C+Fit+for+Yamaha+MT-...) People say the OEM is deceptively small for the amount of wind it displaces. It's the only time Yamaha has got the front end right on this engine except for the R7.

Nice! Here me now and believe me later. Don't forget to get this OEM front wind cowl knockoff for $30 to complete the look! Paint the bolt heads black when you remove them.

https://smile.amazon.com/gp/product/B09CLJSXKS?pf_rd_r=GHZQNE1Y42C4T5J40CR4&pf_rd_p=8fe9b1d0-f378-4356-8bb8-cada7525eadd&pd_rd_r=a12188a5-81bc-4943-a62f-1f9ec7302307&pd_rd_w=J3XXp&pd_rd_wg=lA4Zb&ref_=pd_gw_unk

I ordered this one but it won’t show up for another month. I don’t expect it to work, just wanted something that looks cool and hides my key.

https://www.amazon.com/dp/B09HNVB9VZ/ref=cm_sw_r_cp_api_glt_fabc_Q5AYYX94FJCMNQK6HBT0?_encoding=UTF8&psc=1

Rear view Mirror Motorcycle, Universal Motorbike Aluminum Alloy 7/8" 22mm Bar End Side Rearview Mirrors(Red) https://www.amazon.com/dp/B094NS5YR7/ref=cm_sw_r_apan_glt_fabc_GWHJ6NTWNJNYJPD7RTDS?_encoding=UTF8&psc=1

UbuyMotor License Plate Holder... https://www.amazon.com/dp/B085WMBJ4P?ref=ppx_pop_mob_ap_share

It doesn’t have a big enough hole for the wire connectors of the turn signals but you can slightly pinch them behind it

A pitbull stand is top of the line. You get what you pay for. Only stands I have ever owned and for good reason too. Also a gallon of kerosene and a spray bottle and one of these to clean the chain TIROX 360 degree Brush for Chain (Original Version) https://www.amazon.com/dp/B00AC85QRC/ref=cm_sw_r_apan_glt_fabc_GD0AR36VDP058Y1TBMR0?_encoding=UTF8&psc=1

Yessir! Just did a 100 mile ride yesterday and they held up great. Here’s links for the mirrors and adapters..

https://www.amazon.com/gp/product/B08PP55WV7/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B092VS9GMT/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

H4 for headlight

T10 for running lights

was really easy plug and play. took about 5 minutes. if the running lights dont turn on, just try flipping them because the direction actually matters. i got lucky forst try though. hopefully the links work.

I ended up getting these and replaced the weighted bar ends to put on the mirrors https://www.amazon.com/dp/B092VS9GMT/ref=cm_sw_r_cp_apa_glt_fabc_4ACC7VY04B84018Z7E6V?_encoding=UTF8&psc=1

Before that I actually rigged by cutting 1/2" pvc enough to slip on the bar end mirrors but they were too loose so I put electrical tape to help but they still were a bit loose and was able to move by hand

Bought mine off amazon and its really neat, here is the link: https://www.amazon.com/Xitomer-Fender-Eliminator-License-Compatible/dp/B07TB2PRLT/ref=mp_s_a_1_3?dchild=1&keywords=mt07+tail+tidy&qid=1625002581&sr=8-3

Lorababer Motorcycle Motorbike Sport MT07 FZ07 Windshield Windscreen Shield Screen with Mounting Bracket Protector Deflecr for 2018-2020 Yamaha MT FZ 07 MT-07 2019 18 19 20(Smoke) https://www.amazon.com/dp/B07LC7GZFZ/ref=cm_sw_r_cp_api_glt_fabc_JHZ3QGK437TG3EQ1S63A?_encoding=UTF8&psc=1

I like it so far. It mostly blocks all the wind from my neck down which is what I wanted And I’m 5’10”

So I guess I have the stock relay! Bought this hope it works out.
2-Pin Electronic LED Flasher Relay FIX Motorcycle Turn Signal Bulbs Hyper Flash https://www.amazon.com/dp/B073J82PNF/ref=cm_sw_r_cp_api_glt_fabc_QEQQ5T65ND6RXJ0WDM8D

Here you go:

wonuu Rubber Duck Toy Car Ornaments Yellow Duck Car Dashboard Decorations Squeeze Duck Bicycle Horns with Propeller Helmet https://smile.amazon.com/dp/B08BYJGHNQ/ref=cm_sw_r_cp_api_glt_fabc_502NRHVYNRCG20HJG5F9?_encoding=UTF8&psc=1

I have mine secure also with Velcro tape sod there’s a little “give” in the wind resistance when riding. Also, make sure the propeller screw is on there properly so it doesn’t fly off.

Enjoy! I get strange looks from people when I ride with it, but IDGAF, they’re just mad.

https://www.amazon.com/gp/product/B074Z2NFWW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I have a 2019 and bought this for the headlight: Lumenon H4 9003 LED Headlight Kit... https://www.amazon.com/dp/B07RYPNW4G?ref=ppx_pop_mob_ap_share

I also changed out the running lights with these: AUXITO 194 LED Light Bulb 6000K... https://www.amazon.com/dp/B071LHP5WP?ref=ppx_pop_mob_ap_share

https://www.amazon.com/dp/B005C59NO2/ref=cm_sw_r_cp_awdb_imm_t1_jEIvFbNJDZ972 this oem from Yamaha the one I got comes with factory grip or you can go motion pro https://www.amazon.com/dp/B000WJ7OGC/ref=cm_sw_r_cp_awdb_imm_t1_wFIvFbCCHBXWD I went with oem since their is a slight difference in respond 60 80 as of now we basically had to do a 180 with the throttle to fully open.

Why not just swap out the bulbs for LED bulbs. The main bulb is an H4/9003 bulb and the two smaller ones are T10 led bulbs I found on Amazon. It cost me about $44 with spares.

https://www.amazon.com/dp/B071LHP5WP/ref=cm_sw_r_cp_apa_i_3lWnFb2H4EJZD

https://www.amazon.com/dp/B07HQFCPN7/ref=cm_sw_r_cp_apa_i_pnWnFbZ5K93V8

I found one on Amazon. From a seller called labelbike. Seems alright. Planing on buying it myself.

I pick one up on amazon for 35 bucks works great and holds my led turn single great.. her is the link Xitomer FZ 07 MT 07 tail tidy, Fender Eliminator for Yamaha FZ-07 MT-07 2014 2015 2016 2017 2018 2019 2020, with LED License Plate Light, Compatible with OEM/Stock Turn Signal https://www.amazon.com/dp/B07TB2PRLT/ref=cm_sw_r_cp_api_i_vE-kFb7NNJPEB

Cheap levers on amazon. Ill try to find the link

Edit: The ones i bought no longer exist on amazon. These are similar though