What are
/r/SigSauer's
favorite Products & Services?
From 3.5 billion Reddit comments
The most popular Products mentioned in /r/SigSauer:
The most popular Services mentioned in /r/SigSauer:
The most popular reviews in /r/SigSauer:
Get a silicone gun cloth and give it a quick wipe down every day. A thin coat of oil every other week. The Nitron definitely will be rust resistant, but nothing is perfect.
This was printed on an Ender 3 Pro, which you can usually find for $220-$250.
If your budget allows and you think you'll use it enough, which you will, get the new Ender 6. It is a CoreXY style printer, with bigger print bed and an enclosure that will help when printing ABS and other higher temp materials. Plus a bunch of other noteworthy features.
Awesome setup. Super clean and organized. For anyone who wants something similar but are too lazy to pluck/cut the foam yourself, I got one of these to store my M11-A1 and P238. They also have a matching backpack for range use. They have tons and tons of options on Amazon. They basically use reputable brand cases (Pelican, Dora, Flambeau, etc.) and do all the foam work for you. I can also vouch for their excellent customer service (very responsive and friendly).
These are a little cheaper. You have to keep tension on them. Maybe watch a video of them being used first. It’s pretty easy. https://www.amazon.com/dp/B07Z4R1ZR6/ref=cm_sw_r_cp_awdb_imm_R3MEX94QK0FKHWMG0K75?_encoding=UTF8&psc=1
This and a more complete set of bits has proven well worth it to me as I have added more and more pistol red dots. I bought it originally for a gas block that required an inch/pound torque setting.
Bore sight for sure! I used one for my 507k. They’re not too expensive on Amazon. Here’s the one I used and the zero was accurate.
EZshoot 9mm Bore Sight Cal Red Dot Boresighter Rem Gauge with 3 Batteries https://www.amazon.com/dp/B07VYY3RT5/ref=cm_sw_r_cp_api_glt_fabc_PN4QX44DWDX95FJ3TWKF?_encoding=UTF8&psc=1
Bought this on Amazon along with the Romeo 1 pro for my new M18. Fit super snug and dialing in the red dot and bore sight took 2 seconds. Haven't had a chance to get to the range yet but was surprised how far off the red dot was from the bore sight going from say 10 feet to 21 paces (about 60 ft. Have a long hallway in house). Interested to see how accurate it is.
Bosch ITTHV106 6 pc. Impact Tough 1 In. Torx Screwdriving Bit Set https://www.amazon.com/dp/B07ZS6FY42/ref=cm_sw_r_cp_api_glt_fabc_7V31BRGNMT2C7BVQDCXF?_encoding=UTF8&psc=1
CRAFTSMAN Hex Key Set, 25-Key, 3-Pack, Folding (CMHT26004) https://www.amazon.com/dp/B07R69YTNB/ref=cm_sw_r_cp_api_glt_fabc_CT21B35S7DMSPZEJMQBD?_encoding=UTF8&psc=1
Case Club 5 Pistol and 20 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust (Upgraded Gen-2) https://www.amazon.com/dp/B00K7LGLRS/ref=cm_sw_r_cp_api_glt_fabc_AJ6EWQ4JWVKD5NKDRGMH
Congrats fam. I love mine so much more than I ever expected.
You didn't ask, but it's a gun blog, so here's my humble offering. - If you're looking to add a pinky ext to that flat mag, I grabbed this Pearce Grip Ext . Happy with it. Cheaper and it offers just a hair more length than the factory.
If that tip works out, please send me one of those bullets. TIA
https://www.amazon.com/Mako-Universal-Picatinny-Mount-Pistols/dp/B004O6CDV0
This is not advised. Pistol optic need to be stronger to withhold the recoil since the slide moves fast when firing and creates a lot of inertia. When shooting on an at they arnt whipping back and forth on a slide. So to answer you question, yes but you really shouldn’t
I tried to get the most assuming thing I couldmini guitar bag
Thanks. It didn’t come with any sights, these are Wilson Combat. Just a heads up, for the front sight you will need an M-Lok to picatinny rail adapter. Here’s one:
https://www.amazon.com/Magpul-M-LOK-Aluminum-Picatinny-Accessory/dp/B08BMBPJRW
got it from their amazon direct store for $80 delivered, it comes with 2 adapters, one for glock and one for 1913
Saw these in the SIG store and thought they looked gorgeous also. However I've seen some reviews mentioning rust forming on the screws:
This one is from Amazon and the customer took a pic of the rusting screws.
This one also mentions rust forming on the screws as well.
I can see why it happens. Leather has a tendency to retain moisture, and if you combine that with non-stainless steel screws you're bound to run into some rust issues. I don't know if the manufacturer ever addressed the issue, but just keep an eye on the area just to be sure the same thing doesn't happen to you.
I always wear a thin undershirt when carrying a weapon.
https://www.amazon.com/Under-Armour-HeatGear-Sleeveless-Compression/dp/B00KXA9S6E
Its a fairly cheap Amazon find. But, I am really impressed with it... Green laser thats INSIDE the flashlight, rechargeable battery, battery strength indicator.. Not bad for around $75.00. https://www.amazon.com/Lasercross-Magnetic-Flashlight-Rechargeable-Picatinny/dp/B07XQ658N4/ref=sr_1_10?crid=3NKRQ3WG0WZJR&dchild=1&keywords=laser+flashlight+combo+for+pistol&qid=1589332324&sprefix=laser+flash%2Caps%2C202&sr=8-10
I also saw this on Amazon. I’m trying to stay away from another range bag overall, as I have a large one to carry all my gear. I just found https://www.amazon.com/ACETAC-Tactical-Handgun-Reflective-Universal/dp/B093PCFGX9/, which is more of what I was looking for. It’s a case just for the handgun. My range bag already has spots for mags and everything else.
I love this bag. Holds everything and more. My bag holds on the regular, 2 sets of hearing protection, 2 pairs of glasses, binoculars, 500 rounds of 22, roughly 12 mags, 4 pistols, random gun tools, batteries, couple rags and I still have pockets available.
https://www.amazon.com/Case-Club-Tactical-4-Pistol-Backpack/dp/B01LQQZ2RC
I am putting this on it for optic.. what do you think?
https://www.amazon.com/Vortex-Optics-Strike-Eagle-Riflescopes/dp/B086WRH3XR?th=1&psc=1
I would say it depends on how damp your closet gets. Humidity makes things rust, and an $80 Pelican case will keep the moisture out. It's a worthwhile investment for a $1K pistol.
I have this Real Avid Kit. Has everything you need minus the forceps and screwdriver, which you can pick up for $20.
> Plus a dollar per target.
I got some stacks of discarded paper from work (think printed documents that were going to the trash) and some 3 inch stickers for targets.
https://www.amazon.com/gp/product/B01M0815NR/
3 inch targets are giant at 10 yards and super cheap. 25 targets per dollar.
Here where I found it on Amazon
It was on a great sale and it was sold by Amazon and not some 3rd party seller so🤷
The only problem I’ve ever heard from the Tx22 is possibly getting a crack in the slide near the recoil spring. Supposedly this can help avoid it:
https://lakelinellc.com/Lakeline-Buffered-Stainless-Recoil-Assembly-for-Standard-Taurus-TX22
I bought one, so far so good.👍
I run the same setup in a Tenicor Velo 4. I wish I had just bought it from the getgo instead of trying 3 other holsters first and wasting money on shipping and restocking fees. If you're on a really tight budget, this one impressed me for the price.
It’s pricey but will pay for itself with a few uses.
Eagles hockey tape I’m ocd and even though it will get used I try to make it look perfect.
I was going to order through swampfox for their red dot screw pack, but frankly I went the path of least resistance and ordered from Amazon. It was half the cost and had more M3 length variations:
https://www.amazon.com/gp/product/B073J4CRZV/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
The only difference is you'll need a hex driver instead of torx.
Yes, though his is a MK 25.
The omnivore is compatible with any firearm on this list paired with either a StreamLight TLR 1 or 2, or a Surefire X300 or X300U-A.
If OP is wanting a Safariland holster because they’re already heavily invested in the Safariland platform, there is an available adapter that allows the two platforms to integrate, and also pair either platform’s mounts with the other’s holsters. It’s pricey, but it’s very well made and adds an element of modularity for those who like to maximize their options.
I dunno about best, but i got this one from amazon just cause didnt want to wait weeks/months for a custom one. it was a little snug so hit it with heat gun for a few seconds and adjusted the kydex now it fits a glove. its actually quite comfortable on strong side IWB. im sitting at my desk at work and dont even feel the holster or blaster.
https://smile.amazon.com/dp/B09B6GKT8X?psc=1&ref=ppx\_yo2ov\_dt\_b\_product\_details
Cut these down to size (fit perfect on the larger and smaller diameter weights) then put a small amount of clear epoxy on the top to lock them in.
https://www.amazon.com/dp/B000BOANUW?psc=1&ref=ppx\_yo2ov\_dt\_b\_product\_details
You can hide it better with different choices in clothing. I usually wear something over the top of my shirt like this.
Amazon has a couple of really great range backpacks and carry duffle bags. I have 3 handguns and use a backpack. Sig case fits perfectly in the bottom compartment and ammo/extra mags/ears fits in the top. Mine came with sleeves but there’s others with designated slots up to 6-8 handguns I think. 3 gun set up
I carry a Glock 43x or 48 with an Olight (keep your explosion comments to yoreself lol) but I love my [FDO industries](www.amazon.com/dp/B097YYN5TZ?psc=1&ref_=cm_sw_r_ud_dp_RE0J83FBZF8JWD2EBC3Q) holsters. The wing cants the grip into your body & it Carrie’s like a dream.
I've only had my 365XL for a few months, but I had a similar issue fully loading the new magazines. Load a 12 round to 11 or the 15 round to 14 works well, but that last round just doesn't feel right and leads to issues with a quick magazine swap. My solution is to just load then 1 round short for now. If they loosen up, that may change.
I did buy a loader to help until they feel better though.
My buddy had this one: ATG Heavy Duty Universal Pistol Dovetailed Rear Sight Pusher Tool https://www.amazon.com/dp/B07DMZDD6V/ref=cm_sw_r_apan_i_K35X30N98X25NDNMG65X
In my case, the rear sight was locked in so tightly we had to vice mount the pusher. Notorious issue with the shield.
I’m running a similar set up (x carry grip 3.9 barrel and tlr7a) I picked up this S & G OWB, only used it once but really like it so far and being lefty, my choices are already limited most of the time lol. S&G. I don’t have an optic but it does have a cutout for them.
I looked around for a bit and ended up going with this one. I know, it’s sold on Amazon, and some people are very anti Amazon, but sharing anyway. Tactical Gun Range Bag Deluxe Pistol Shooting Range Duffle Bags https://www.amazon.com/dp/B078PKFXR4/ref=cm_sw_r_cp_api_i_KGDW1PAVF1W8DSFYY3K0?_encoding=UTF8&psc=1
I didn’t want to break the bank with unnecessary features and it’s been a good bag. Good luck with your search.
These are the Trijicon bright and toughs, they work very nice through the Holosun, literally just right height to have a clean picture through the optic but not tall enough to get in the way of normal optic shooting.
They’re on sale at amazon if you’re thinking about them! link
I've just been using this cheap pocket holster lately but I've been open to finding something else. Nothing wrong with it though.
Otis Technology 10 Pack AP Brush (Bonus Blue Receiver Brush) https://www.amazon.com/dp/B078VQJB59/ref=cm_sw_r_cp_api_i_KKXD205Q4Q28892M5EKQ
Use the skinny end of the brush to push down the detent and remove the buffer.
No idea on long term durability or security, but this has been working ok for me: https://www.amazon.com/dp/B08TTZVN21/ref=cm_sw_r_cp_api_i_dl_5C1GXZBJ425ZN8P1J35C?_encoding=UTF8&psc=1
Not a lot of options for full sized guns with optics.
Sig Sauer SORG0305 Romeo Zero micro open reflex sight 3 MOA OD Green And P365XL Grip Module https://www.amazon.com/dp/B09LS748K5/ref=cm_sw_r_apan_i_D5HQ51PFJ40XBEJQGDS1
It's a combo with a romeozero I'm actually selling the sight lol
Not sure if anyone else has mentioned using Obsidian 9 in short config. I was having similar issues with my Legion P320 X Carry and difficulties with cycling with my Obsidian 9. I lubed up the Obsidian 9 OEM piston and spring with white lithium grease and used it in short config. No more problems for me, and I didn’t have to mess around with buying different recoil springs/guide rods.
I run a Streamlight TLR-1 HL. No complains, works when I need it to, and it’s bright as fuck.
I did have the same issue until the mag springs were worked in a bit. I opted to get this speed loader and life has been easy ever since.
I got them off Amazon Sig Sauer SORG0305 Romeo Zero micro open reflex sight 3 MOA OD Green And P365XL Grip Module https://www.amazon.com/dp/B09LS748K5/ref=cm_sw_r_cp_api_i_7ZE4RJJHX1RBPPV8HP9F?_encoding=UTF8&psc=1
It shows like a dark green but it’s closer to a tan color.
On second thought, I’ll just use this ! I just gotta wrap the second end somewhere on the grip, and it’ll be perfect.
I've been looking myself and the only alternative to the tlr6 is the night hawk https://www.amazon.com/Nightstick-TSM-13G-150-Lumen-Rechargeable-Tactical/dp/B08XNQ9YVG
But there's limited reviews after going through several sites and many say the laser doesn't hold zero... This is the only green laser with 50 more lumens than the tlr6. It's also bulkier and sticks past the barrel unlike the tlr6. Very torn about not having 500 lumens like the tlr7. The tlr6 is the tried and true but the most limited performance of the bunch. Might give the night hawk a try before settling for the tlr6 🤷🏻♂️ do you think 100-150 lumens is enough to incapacitate someone inside a house like the 500 lumen tlr7?
Safariland 7360 ALS/SLS, Level 3 Retention Duty Holster, Mid Ride, Fits: Sig Sauer P320 9mm.40 Full Size w/ITI M3, Streamlight TLR1, SF X300, X300U - Black - STX Plain, Right Hand https://www.amazon.com/dp/B06Y2FH55Q/ref=cm_sw_r_apan_glt_i_DHFYMWBCDKTCA6J2053X?_encoding=UTF8&psc=1
Might be this Vaultek. I’m considering it as well, but will probably spend the extra few bucks and get the biometric scanner.
I'd received advice on some nice holsters but thought I'd try some cheaper ones on Amazon with free returns. Ended up with this. Conceals very well at AIWB with a sweatshirt or jacket, or at 430/5 in a Tshirt.
I've found that sidecar holsters are much more comfortable than handgun-only holsters for AIWB to me.
One more comment regarding belts, I ordered several off Amazon and tried them all until I found one that worked well for me. Some were too thick in my opinion (reinforced) and some had a very sharp edge, almost like a dull hack saw blade. To my surprise, this $15 belt was the best of the Amazonian ones I tried.
https://smile.amazon.com/dp/B0822SRH33/ref=cm_sw_r_cp_apa_fabc_bUTWFbE7RP0P2?_encoding=UTF8&psc=1
I thought that belt was fine. But I kept having to adjust and pull up my pants all the time, even when it was pulled overly tight. So I broke down and bought a decent carry belt. HUGE improvement. I went with NexBelt. Very comfortable, and pants stay up for hours with not adjusting. Love the ratcheting buckle too. I wear Nexbelt every day, even if not carrying. I have several of them in the EDC Supreme and the Titan. They are just so comfortable and easy to adjust to exactly the right size to be comfortable, adjust to let it out a little while sitting at the dinner table with a single press of the ratchet release.
I use this with an ulticlip and I find it to be the most comfortable and feeling safe with the trigger being fully covered.
Raven Concealment Vanguard 2 VG2 with Overhook IWB Tuckable Trigger Guard Holster for Sig Sauer P365 https://www.amazon.com/dp/B07NLG25MY/ref=cm_sw_r_awdo_navT_a_NQ29J1VFDDWKT5VV859H
I bought a nice set including the wheeler torque tool from Amazon
Wheeler Manual Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance https://www.amazon.com/dp/B0012AXR4S/ref=cm_sw_r_cp_api_glt_fabc_9F2PBEXMS2N7HW4CVTEC
you know, it might be worth considering using a kind of foam non-slip shelf liner instead of foam inserts, so you can quickly get your fingers around the right part of the grip and not dig your hand into the foam or the trigger guard.
foam would be great for extra mags, though, so they're not rattling when you pull the drawer. just a suggestion.
People are probably gunna dislike this choice of light brand but it’s an Olight Baldr Pro. Olight Baldr Pro Green Laser and LED Light Combo, 1350 Lumen CW LED Flashlight, Quick Release Mount, 2 x CR123A Batteries and LegionArms Sticker (2- Black) https://www.amazon.com/dp/B07YSWCGRY/ref=cm_sw_r_cp_api_glt_fabc_EDMQ6ES49W9K76JS1SH8
After some higher priced recommendations from friends I decided to order three cheap ones off Amazon with free returns. Figured it wouldn't hurt to try them. I ended up keeping one by Warriorland. I was primarily concerned with concealment over comfort and I have nothing else to compare it to. But I like it and it conceals well. I'm 6' 175lbs and it hides under a Tshirt very well.
No, it’s the style of safe.
Here’s one on Amazon. Mine is just a round key to unlock it.
Dalmbox Small Car Gun Safe for Pistols Small Handgun Lock Box with Combination Lock Portable Travel Pistol Safe for Car, Home, Travel (Blue 9.4" X 6.4" X 1.8") https://www.amazon.com/dp/B08TLY6XJD/ref=cm_sw_r_cp_api_glt_fabc_YH9W07JNVRFAT75PJCQG?_encoding=UTF8&psc=1
when shooting chrome you probably want to aim your flash up at the ceiling and let it bounce. Or put the object in a white box.
https://www.amazon.com/Neewer-Shooting-Diffusion-Backdrops-Photography/dp/B00GKGGICC
i went with the pelican 1700
i keep a 9" 300BO SBR and extra barrels in 11.5" 5.56 and 6.5" 300BO + room for a couple of mags and a stock
don't have any pics in its current config post form 1 but here's an early pic with 5 mags and plenty of room for more goodies
If you have a problem while loading the magazine I have tried this speedloader It saves your thumb from injuries!
Product Link: https://www.amazon.com/dp/B088W44HRG?ref=myi\_title\_dp&th=1&psc=1
Oh yea, I also have a Q-Series minimalist that I really like but will feel a lot more comfortable with the manual safety
https://www.amazon.com/Q-Minimalist-Concealed-Stealth-Holster/dp/B0749FQJN4
I have bought this Speedloader from RAE Industries for my Sig P365. It works perfectly. Does the job. Fits perfectly on both sides of this product. Now snug as all hell and a lot easier and faster to load 15 rounds of 9mm mag ammo!
Link: https://www.amazon.com/dp/B088WC1VRY?ref=myi\_title\_dp&th=1&psc=1
Corrosion X is really good. I collect knives and use it on my higher carbon steel blades it keeps the rust off extremely well there too.
The TLR-7 Sub -P365 fits the P365/X/XL proprietary rail. The Tac Dev Adapter converts the proprietary rail to standard locating if you want to use the normal TLR-7/A
If this is just for range use, you should look into the recovery tactical own holster attaches over the trigger guard. ReCover Tactical G7 Universal Ambidextrous OWB Holster for Double Stack Glock, Smith & Wesson, Springfield, Sig Sauer, CZ https://www.amazon.com/dp/B08VN2Q3XW/ref=cm_sw_r_cp_api_glt_fabc_D6V636D2K9WBJGEC5960
Return it to Amazon claiming it doesn't fit as advertised?
TLR7-Sub model that's specific to the P365 is what you would want.
The Model # is 69401
Edit: Found it on Amazon itself [you may be able to find cheaper if you shop around] TLR-7 Sub - P365
I have lights on 2 of my 3 guns so take this with a grain but I don't fully get the whole (spend $100-200 or more) for a high end miniaturized light to hang off my gun when a 1500 lumen compact flash is 20 bucks.
If I am in a real situation with possible multiple assailants stalking me including someone outside with a long gun, I'm reaching for my flash which I will set on a counter, flip on blinker/strobe mode and then duck around a corner real fast because the light is going to draw fire - even if they are blinded, a couple of dudes with sawed off shotguns can/will blow me in half if the light if hanging off the bottom of my gun giving them something to aim at.
Sure, it's nice to have and it's convenient. Am I going to use it , excuse me - blindly in a home invasion situation? I dunno.
Haha I know man.. good to know that even after all these years (I'm a forum OG) the place is still toxic AF to newbies.
The reviews on this particular model are actually excellent. The older models I can understand the hate. The build quality and specs are vastly improved.
OLIGHT Baldr Pro 1350 Lumens Tactical Weaponlight with Green Light and White LED, 260 Meters Beam Distance Compatible with 1913 or GL Rail, Powered by 2 x CR123A Batteries (Black) https://www.amazon.com/dp/B0833MMN67/ref=cm_sw_r_apan_glt_fabc_E70V5HGJP9948AX7180P?_encoding=UTF8&psc=1
Bought this and reapplied it on both screws. I'm going to reinstall it on the P365x and test it tonight. https://www.amazon.com/gp/product/B004UMONPC/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&psc=1
Muddy River Tactical:
https://www.amazon.com/Muddy-River-Tactical-Waistband-Leather/dp/B08DC9CMCV/ref=sr_1_1
Awesome lil' tuck n' go. I have one for my P365 and one for my Springfield XDS.
All of what was said above... I live in South FL, so we deal with humidity daily. I use a silicone gun cloth and wipe down my XL every weekend. Or whatever EDC I've cycled in
I bought this for a stripped head on something else. Only one I could find that worked with M2 sized screws. I was super happy with how well it worked.
22 Pieces Damaged Screw Extractor... https://www.amazon.com/dp/B092VH2X72?ref=ppx_pop_mob_ap_share
I bought this keychain from Amazon.
Rotary13B1 Remove Before Firing Keychain - Red/White https://www.amazon.com/dp/B0116QLMI0/ref=cm_sw_r_cp_api_glt_fabc_GC09E8VBKT781EDWAPKP?_encoding=UTF8&psc=1
Then drilled a small hole in these chamber flags.
Sylvan Arms Universal Firearm Gun Chamber Safety Flag Color: Red Orange Set of 8 https://www.amazon.com/dp/B079MHPNZB/ref=cm_sw_r_cp_api_glt_fabc_B8QPRHGC1ED3JNKA9J75?_encoding=UTF8&psc=1
For $90 (currently on sale) you can get an awesafe off Amazon with free one day shipping. I bought one recently and it was exactly what I was looking for. It’s an all metal safe that can be accessed via a biometric scanner, 4 number pin code, and a regular key. The finger print scanner stores I believe 30 fingerprints. It’s so you can do the same finger in multiple positions to make sure it’ll open. It’s very hefty for the size and feels good. There’s a little light inside that turns on when the safe opens so you can see your goods. It has almost 5 stars with over 10k reviews. There are a couple one star reviews saying that if the safe is dropped a couple of feet that it pops open. I immediately tested this on mine and did several drops up to 4 feet and mine did not open. They must have been duds. Id recommend performing the drop test upon receiving and if yours is a dud they offer free exhanges and returns but based off of there reviews I’d say it’s very uncommon. Here’s the link: Limited-time deal: awesafe Gun Safe with Fingerprint Identification and Biometric Lock https://www.amazon.com/dp/B07TM45FRS/ref=cm_sw_r_cp_api_glt_fabc_dl_E831NE2NGPQA25BEK0SF?_encoding=UTF8&psc=1
Funny you should mention that, I just found the RXP slide with a Romeo Pro on Optics Planet for $505.99. Here
I sent an email out to the Armory Craft Guys as well - We'll see what they have to say. I originally was thinking I wanted to mount a 3.5 MOA Trijicon, but between the shipping, machining, and wait times it just may not be worth the hassle. I guess I am just concerned about the longevity of the Romeo Pro..
Thanks for the info and the reply!
Raven Concealment Vanguard 2 VG2 with Overhook IWB Tuckable Trigger Guard Holster for Sig Sauer P365 https://www.amazon.com/dp/B07NLG25MY/ref=cm_sw_r_apan_glt_fabc_XVEXMWD46CND1E3JDW0M?_encoding=UTF8&psc=1
Good choice. The metric thread spec is better for this use anyways. You can put an O-ring in the little slot at the base of the threads near the shoulder (that's what it's for) and it will help keep the can from unthreading when you don't want it to. An M 1x12 Viton o-ring like these will fit IIRC. It's been a long time since I ordered them.
Also, and you may know this, but make sure if / when you use the can on your MPX, take the spring out of the booster and use a fixed barrel adapter in there. You do not want the can jumping around on your carbine.
Amazon special sight pusher FTW. not something i do often enough to justify spending a huge amount of money on it:
I carry an m18 appendix and this cheapo Amazon holster has been great for the past year lol.
DeSantis Sof Tuc
DeSantis 106NA8JZ0 Gunhide, Sof-Tuck Inside The Pant Holster, Fits Sig P365, Right Hand, Tan Leather, N/A https://www.amazon.com/dp/B07BNHF3KC/ref=cm_sw_r_cp_api_glt_fabc_75KWJAXQJCZM6Z2MYES9
It’s just a baseplate you can swap out that has a pinky extension. I’m a pretty big fan of these especially when I’m carrying the small subcompact frame (as pictured).
>Other than grabbing a threaded barrel do you have any suggestions?
If you get a factory threaded barrel that uses 13.5x1LH threads, there is a small groove at the base of the threads for an o-ring. If you slip an M 1x12 Viton O-ring (like these ) on there, it'll keep your suppressor from unthreading. Do not do this if you get a barrel threaded in 1/2x28, because it's not designed for that and needs to index on the thread shoulder. The M13.5x1 LH threads, though, index on the muzzle face and are designed to have an o-ring in there.
Savior is the brand. Off Amazon for less then $40. Quality is pretty good.
Tulster AIWB, fits with my TLR-6, good build quality and very slim. I’ve been carrying this every day for more than a year now, no complaints.
Case Club 5 Pistol and 20 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust (Upgraded Gen-2) https://www.amazon.com/dp/B00K7LGLRS/ref=cm_sw_r_cp_api_glt_fabc_AJ6EWQ4JWVKD5NKDRGMH
Same AR I have. I went with the vortex
Vortex Optics VMX-3T Magnifier with Built-in Flip Mount , Black, Size 37-40 https://www.amazon.com/dp/B00BQWTC14/ref=cm_sw_r_cp_api_glt_fabc_S1255MHPTXXBJK93VKP5
Amazon
Case Club 5 Pistol and 20 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust (Upgraded Gen-2) https://www.amazon.com/dp/B00K7LGLRS/ref=cm_sw_r_cp_api_glt_fabc_AJ6EWQ4JWVKD5NKDRGMH
This is what I picked up...
It's a Red bore sight....I could find a green at the time, but if you can find a green one, I'd recommend to use that and that way you can contrast them. And when they coincide the color ought to change through the viewfinder (If I understand the physics of color, of course.).
I used this one. Remember to use some adhesion promoter also, it really makes it stick! X-acto blade would really help get a clean cut around the edges too.
Good luck 👍
I used these. If installing them yourself make sure the front goes in correctly, I broke the front sight and had to order a second set.