It is extra layer for pajamas for small children’s. Because of SIDS(sudden infant death) it is not recommended that they sleep with blankets due to risk of suffocation. Instead you put them in a sleep sack for warmth.
Simple Joys by Carter's Baby 2-Pack Microfleece Sleepbag Wearable Blanket https://www.amazon.com/dp/B083VSJM52/ref=cm_sw_r_cp_api_glt_fabc_D77W2D51RX9QEX1HF617?_encoding=UTF8&psc=1
I'd see if you could get a bit of fold over elastic (they come in all sorts of colors). If you go that route, hold it stretched out as you stitch in on, or sew it on with a zig zag stitch.
I have a cat that did the same thing, repeatedly. Twerp couldn't chew through this one though:
https://www.amazon.com/gp/product/B000WHTI36/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
You can so buy little plastic patches. They clip onto either side of the screen to cover the hole. My dad got some that were butterfly shaped and are super cute!
Amazon! They're filled with Kapok fiber, which I really like because it makes them super-duper firm (but not hard). I will say they pop stitches pretty easily, but the fabric itself is a super-duper heavy-duty canvas, so you can stitch 'em back together with heavier duty thread.
We've had ours for over a year and they've held up pretty well. (and I will 100% admit that I used the one with the popped stitches as a step stool to hang a curtain, which is pretty much the only reasons the seams popped on that one.)
Great work! Don't worry about having bent the needle, it was just conforming to the job you wanted it to do. ;)
Not sure if this USA Amazon link can help, but this is the kind of tool you'd want to have to do more projects like this...
Speedy Stitcher Sewing Awl
Oops! Came back to this same question a lot of times, didn't realize it would be so popular! It's this epoxy! That's the most workable one I found but it still doesn't dry very fast so you have to be pretty patient while piecing it together (but it's much better than the one I've found recommended most often, which is really more of a varnish and is very hard to use).
CC: u/portersmokedporter u/BeeWhisper u/innergeorge u/Music_Decent u/d0ttyq u/lacroixgrape
It may be in the syntax - you don’t want knitting yarn but mending yarn. It’s normally sold wound on little cards like this - you might have to mess about with your search terms before you find what it’s called local to you.
I've never tried this myself, but vinyl/pleather repair kits do exist.
However, since you're asking on the visible mending sub, I would rather recommend an upgrade with embroidery or beading. Maybe something to match those rhinestone details?
You also may need something like a bail and some E6000 glue. I’ll link to a basic link with jewelry bails…
Use a 1/2 inch (or smaller) keychain ring then use a beading charm? I fix zippered pouches and broken jackets like this. I’ll usually pick a kind of glitzy, small pendant sized charm. Angel wings are a favorite 😉
Here’s a link to the rings and I’ll see if I can link example of charms that would be good to use size wise…
This first link sells three different sizes, 2/5 inch diameter, 1/2 inch diameter and 3/5 inch diameter… Key Chain Rings - 1/2 inch diameter
I went with a food-safe epoxy and the gold glitter they sell for decorating cakes like this one. It turned out pretty well - there are some swirls in the glitter but it looks decent and has held up for two years. And I didn't have to deal with urushiol lacquer.
I used this spool because I already had it, if I had grey or white outdoor thread I would have preferred that.
And if I were going to buy something specifically for this project I would have bought an actual mesh repair kit, those are cheap but the way I did it was free.
I would get Marine Glue, squeeze some into the piping, press the coat material back into it, clamp and let it dry.
Marine Glue is waterproof and flexible. I use it to repair my boots when the trim comes loose.
I use this one
3M Marine Adhesive Sealant Fast... https://www.amazon.com/dp/B003E1ULRE?ref=ppx_pop_mob_ap_share
I would put a patch of plastic needlepoint canvas on the backside to not only stabilize, but also give you a structure/pattern for your mend.
Kintsugi it! Buy some resin epoxy and mix in some mica powder - color of your choice. Since it has some larger chunks missing I'd build up the epoxy in layers. Paint a bit on, wait for it to dry, add another layer, dry, etc. May take a few days.
You can get small epoxy kits. Gorilla glue has a good one. I've used this one and liked it. (It's nontoxic for cups) PC Products PC-Clear Epoxy... https://www.amazon.com/dp/B008DZ19WC?ref=ppx_pop_mob_ap_share
I've done some sashiko mending and really enjoyed it. I bought these items (I am not advocating for Amazon- just where I got them and they were inexpensive.).
Emma Creations Sashiko Needles-2/Pkg https://www.amazon.com/dp/B002PI4ZIS?ref=ppx_pop_mob_ap_share
Sashiko thread 40m col.2 5x1 https://www.amazon.com/dp/B00KOOJ080?ref=ppx_pop_mob_ap_share
I have used battery powered lint removers in the past, and they were universally terrible. I wanted a commercial grade product that was the best there is at the problem, and this product delivered on it. I've got a fleet of Darn Tough socks that I love almost everything about, except that they all pill over time, despite washing them inside out by themselves. And in their current states, I was no longer comfortable wearing them with dress shoes due to their appearance.
Enter this shaver to the rescue! As you can see from the before/after pics, the socks basically look brand new after a touch up . I only used it for this use case, but have no reason to believe it couldn't work for your couch, pants, sweater, whatever else you've got with a problem.
Don't hesitate at the price, just buy it. You won't regret it. https://www.amazon.com/gp/product/B097LHS2MR
I'm not the OP but I just got this one and it's pretty good quality. Some of the other ones on Amazon have reviews which say the edges are sharp, this one is smooth. https://www.amazon.com/dp/B09F3J62TK?ref=ppx\_yo2ov\_dt\_b\_product\_details&th=1
I haven't bought or used it myself but ran across this product on amazon:
https://www.amazon.ca/Tuff-Toe-Protector-Waterproof-Adhesive/dp/B00B6RRCVQ?th=1
You must Try this corded shaver I was wary because of the price of 49 usd for the pionix heavy duty fabric shaver but it was my last ditch effort before giving up and buying a new couch. We have kids and dogs and this was an absolute life saver. Did the entire sectional in 30 mins. I previously bought a battery one and used to take me seriously a total of 4 hours and would not get nearly as smooth as this one. Easy to clean out. Powerful! 10 out of 10 recommend!! https://www.amazon.com/gp/product/B097LHS2MR
I was wary because of the price of 49 usd for the pionix heavy duty fabric shaver but it was my last ditch effort before giving up and buying a new couch. We have kids and dogs and this was an absolute life saver. Did the entire sectional in 30 mins. I previously bought a battery one and used to take me seriously a total of 4 hours and would not get nearly as smooth as this one. Easy to clean out. Powerful! 10 out of 10 recommend!! https://www.amazon.com/gp/product/B097LHS2MR
I was wary because of the price but it was my last ditch effort before giving up and buying a new couch. We have kids and dogs and this was an absolute life saver. Did the entire sectional in 30 mins. I previously bought a battery one and used to take me seriously a total of 4 hours and would not get nearly as smooth as this one. Easy to clean out. Powerful! 10 out of 10 recommend!! https://www.amazon.com/gp/product/B097LHS2MR
There's a link to American Amazon in craftasopolis' post (linked to above).
I got those instead: https://www.amazon.de/NEWKITS-Sneaker-Reparatur-Patch-Selbstklebender-Fersen-Reparatur-Patch-Schuhloch-Verhinderungs-Patch/dp/B09DVY8WYG/ref=dp\_prsubs\_1?pd\_rd\_i=B09DVY8WYG&psc=1
I don't have any experience but after a little hunting for a fix I found some synthetic leather repair tape. https://www.amazon.co.jp/dp/B0722GLMRK?tag=maftracking283480-22&linkCode=ure&creative=6339
Sure! Hopefully it doesn't break any sub rules? Amazon.ca link
A small note of warning: the metal piece was obviously stamped out and I had to file all the edges because it was sharp. It initially broke elastics and could have even cut fabric, but it filed down nicely and very quickly using just a heavy duty nail file.
For an embroidery hoop, I highly recommend this one by Morgan
It’s a little bit pricey at $30 but you can probably find it used on eBay for less. The reason I like it is because it’s double sided, 5” and 7”. It supports itself in your lap leaving both your hands free to sew and it collapses down flat to store. Granted, I do use it a lot for other projects too but it is so helpful for my arthritic hands that I wanted to mention it in case it might help someone else.
This is the set I bought. The white doesn't erase super great but the others do. They feel cheap but they work. here!
Yes, indeed! They're little wood-coloured rubber things with a hard plastic inner ring. I bought them to frame a present for a friend in, but it turned out it was just the perfect size for this particular project. Turns out I might need a set to keep/use after all. ;)https://www.amazon.de/gp/product/B08L5M8K17/ref=ppx\_yo\_dt\_b\_asin\_title\_o00\_s01?ie=UTF8&psc=1
Hi there,
I know this thread is a couple of months old now, but in case the OP or anybody else comes across it looking for the same thing...
I actually am looking at the same repair, on the same zipper. Looks like YKK #5 or VS5 (Vislon 5? idk) (if my googling is right). Should be fairly easy to find a replacement on Amazon: https://www.amazon.com/Medium-Weight-Vislon-Molded-Plastic/dp/B091V288WR/ref=sr_1_8?crid=32NR3TLJCQ8Y9&keywords=vislon+5+zipper&qid=1648859087&sprefix=vislon+5+zippe%2Caps%2C119&sr=8-8
One of these jobbies. I just Googled it because I was curious, too. I’ve seen people using them a lot on this sub but didn’t know what they were called. If it can help me create something as lovely as OP‘s work, I’ve got to get me one!
FixnZip Instant Zipper Replacement, Medium, Black Nickel https://smile.amazon.com/dp/B009MRFQAG/ref=cm_sw_r_cp_api_glt_i_3DJDEC0P529NPBWQB361
Sorry for Amazon link, I’ve owned one of these for almost two years on one of my favorite sweaters. Works like a charm.
Due to its brand, it may be OEM but this popped up when I googled rolling chair replacement O rings:
Replacement Hardware Repair Kit for Office Chair Gas Lift Cylinder - S4451-K https://www.amazon.ca/dp/B00CEZ1EOK/ref=cm_sw_r_apan_glt_i_VZYQRYFPBVHWDDKF3E4Y?_encoding=UTF8&psc=1
If it is indeed non-standard size, try heading over to a 3D printing sub. Pose the question and provide your measurements, they may have some wizard calculate the density and appropriate size they may print for you (for a $ of course). I think there are guys on eBay who would support this too.
This is the item I bought. Your picture isn't on the listing but in the the paper user guide. No company names unfortunately. The guide says to contact them for videos on how to do it, but no links. Speedweve Style Darning Loom, Small Weaving Loom for Visible Mending Jeans, Weave Tool for DIY Artful Patterns, Repair Fabrics (14 Hooks) https://www.amazon.com/dp/B09F3J62TK/ref=cm_sw_r_apan_glt_i_BSAKTVTW3BC5Y7N8B7AV?_encoding=UTF8&psc=1
I was looking up related books online and reading through reviews to find a helpful one that has some good philosophy of fixing included and this book looked promising, though I haven't read it myself yet:
https://smile.amazon.com/gp/product/B07T2VR15T
"Mending Life: A Handbook for Repairing Clothes and Hearts".
No problem! I use this one:
DMC 6112/6 Aluminum Needle Threader, Blue https://www.amazon.ca/dp/B000YZALOG/ref=cm_sw_r_apan_glt_i_QQC5PERC37M38SFCG0HM
I also use the hummingbird one for regular thread but usually I just do that the struggle way
If you want invisible, it would be very easy to take this to a reupholstery place.
For a tight budget, I'd recommend simply adding a patch on the worn spot. Find a thick fabric, hem it so the edges aren't fraying. I would even glue the patch with a washable glue stick just to make it easier to sew on flat. Then use a curved needle (and maybe pliers) to sew the patch on.
Alternatively, buy this and simple stick it to the worn spot, then add a hemmed piece of fabric on top. I would also sew around the edge with either whip stitch or running stitch just to secure it further. But this would be easiest.
It was a Christmas present, but it came via Amazon from China: https://smile.amazon.co.uk/Loom-speedweve-Multi-Craft-Knitting-Repairing-Beginners/dp/B09GYJ28PP/
Searching for ‘small loom’ gives more results than trying to guess how sellers might have misspelled ‘speedweve’!
Fill with silicone, leave a small space for a tiny circle of fabric.
https://www.amazon.com/GE-GE286-Silicone-Kitchen-Squeeze/dp/B000BQWKCY/ref
These are the very best fabric marking pens, IMO. They come in multiple colors and vanish when ironed. I also use white gel pen to mark darker fabrics, because it’s way neater than chalk. The gel pen washes out with just a few wipes of a damp paper towel.
Something like this
8 Pieces Nylon Repair Patches Self-Adhesive Nylon Patch Waterproof Repair Patches for Clothing Down Jacket Tent Clothes Bag (20 x 10 cm) https://www.amazon.com/dp/B0825W2VMR/ref=cm_sw_r_cp_api_glt_i_Z6F1QJ6ETT03N9E2QBDY
This way you can sew it on or just glue it on it
Thank you! Chalk pencil, which works perfectly on dark sashiko fabric, doesn't work on denim (except black-on-black ones). I use a Clover tailor chalk on raw denim, the best one among those I've tried, and I sharpen it with scissors.
I would iron on and still so some sewing around the edges and possibly a few rows in the middle.
I have used a similar Japanese product to mend socks and the iron wasn't enough but with some stitches, they have held up perfectly!
Here is an example of what I've used: https://www.amazon.com/dp/B005NM5Y7O/ref=cm_sw_r_apan_glt_fabc_B9V8HBERYQXX1FMZMR9K
Here is an Amazon link - I hope it works! Dr. Scholl’s Moleskin Plus Padding Roll (24" x 4 5/8") / All-Day Pain Relief and Protection from Shoe Friction with Soft Padding That Conforms to the Foot and Can Be Cut To Any Size https://www.amazon.com/dp/B007W9MGLI/ref=cm_sw_r_cp_api_glt_fabc_N0HGAZCH472GA654HG86
Its the friction from the fabric rubbing, it's mostly found in places like the under arms, crotch etc. I'm not aware of any way to actively prevent it but if anyone else is then let me know!
Machine such as this; bobble remover
Hope that works, I'm on mobile and first time trying to post a link
Buy a fabric shaver for the sweater because it will keep pilling. Wash the shirt with white vinegar in the final rinse to remove the lint.
If your cat finally destroys it and you decide to replace it instead of rewrap it I'd suggest getting the smartcat ultimate woven sisal scratching post. It's super nice; my cat uses it daily and has put basically zero wear into it so far. It is the wirecutter top pick for cat scractchers
I love that so much!!
Appears to be these: Leaf Patches
Hi! We had pretty snow but that meant slow work for me and more time for this, so here it is: https://www.amazon.com/clouddrive/share/lbVYb7CxZayXqD6CBRxayBmKH9dbUCFo4lMUeZkU5jx
What do you think? Considering the age and delicate weave, it's either this or a patch, which probably won't look much better. It feels a bit stiff, but we'll see how it blends after washing. I used an oval embroidery hoop very carefully, more to help keep the loose pieces lined up. I used number 7 basting needles and cotton quilting thread and just did basic sewing, not really darning. If you can sew buttons, you could try to fix yours. The layers when taut in the hoop sort of stick back together, so I just moved the needle and thread in and out in straight lines while making sure to go into solid areas before turning and going the other direction. I kept the lines going up and down until all the loose strands were secured. Did not pull thread any tighter than necessary. I did one side in cream color and the other side in a matching shade of brown to be sure both sides stay together.
I will preface by saying I know nothing about weaving, and hopefully someone with more knowledge and experience will chime in.. but if it was me, I would probably start by learning the basics of weaving and looking up methods and how-to's. I did some googling and found this nifty contraption that might come in handy. Then I'd pick out some similar fiber to what is there (maybe some fun or complimentary colors), and do my best to tie in and weave in order to match the texture. This picture helped me visualize: https://images.app.goo.gl/jgfTyq38kxnYPVN89
Absolutely gorgeous wall hanging.. I hope you find a way to repair it! Please post when you do! Good luck!
Could you add a chain to it? Or maybe a lace applique? See links below for examples.
https://www.amazon.com/LKXHarleya-Silver-Double-Brooch-Shirts/dp/B07FQMQ3WW/ https://www.amazon.com/Embroidered-Neckline-Collar-Applique-Patches/dp/B07GKP2MJ6/
I'm a gigantic fan of darning mushrooms. I have a darning egg and have never gotten the hang of it. Just to let OP know there are options!
Not sure if you can see my reply to the parent comment so here’s the link to the product I used:
24PCS Self-Adhesive Nylon Repair Patches, 24 Colors Waterproof Lightweight Fabric Repair Patches First Aid Repair for Clothing Down Jacket Tent Clothes Sleeping Bag (3.9 x 7.8 in) https://www.amazon.ca/dp/B08H4MGYLL/ref=cm_sw_r_cp_api_glt_i_518HZ28GFRF0W3656ZG0?_encoding=UTF8&psc=1
Thank you so much! It’s a nylon material with sticky backing: https://www.amazon.ca/dp/B08H4MGYLL/ref=cm_sw_r_cp_api_glt_i_518HZ28GFRF0W3656ZG0?_encoding=UTF8&psc=1
Just started wearing it in the rain, so unsure if it’ll hold long term, same for the next time it needs to go through the washing machine.
Some sort of binding to cover+reinforce?
You can buy just cuffs and replace, but color matching is nigh impossible. I've done contrast cuffs, and soft blanket binding
For people looking for boiled egg storage: the smallest standard Rubbermaid food container (typically used for sauces and the like) fits a single egg really well!
So new to the sub, wife got me interested. I was thinking something like :
Too funny!! I was barefoot for about the first 10 years of my life. Gravel still is no match for my feet! My kiddos are the same way.
This is what I use. Flip flops and sandals are a huge culprit when it comes to cracks and calluses due to the friction
I used these patches successfully on my down coat and my kids. I add one on the symmetrical side to make it look like a design feature. Plus, it adds reflective action. https://www.amazon.com/gp/product/B079L4PFHH/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I've had this fabric shaver for about a year, it has an adjustable guard on it so it's less likely to damage delicate fabrics, plus it came with extra blades and cleaning brush. I really like, I actually use it so much that if I ever need to replace it, I think I would get the plug-in version rather than keep using up batteries
Will this work? This is a zipper pull that can screw onto a broken zipper, it’s been on my amazon list forever but I haven’t needed one yet. I’d install this and then either sew a break on the ripped side bottom so it doesn’t slide off or get crafty with some safety pins.
FixnZip Nickle Medium Instant Zipper Replacement https://www.amazon.com/dp/B009MRFPKM/ref=cm_sw_r_cp_api_i_lId6Db2CD2K7B
Process: mended using Patons wool and Clover tapestry needles
I tried embroidery floss first but it was too thin and I didn't like the way it looked. Next I tried Scotch darning after seeing it online and haha nope could not get it right. Finally settled on the woven fix you see here.
Afraid the best I can offer are these type of adhesive patch - it doesn’t look like an easy colour to match though. Rei, Patagonia etc stock similar. https://smile.amazon.co.uk/WILLBOND-Self-adhesive-Waterproof-Lightweight-Clothing/dp/B07ZQCMFNN/ref=mp_s_a_1_11?dchild=1&keywords=down%2Bjacket%2Bpatch&qid=1598389600&sr=8-11&th=1&psc=1
Thank you! https://www.amazon.com/dp/B06XMR1LYK/ref=cm_sw_r_cp_apa_i_WUtqFbBGQJ2K6. It's this one so it will keep shifting colors. By the time it's finished I think it's going to look neat and won't fall apart again. It looks kind of whimsical. The chair is made of wood.
I used #1 in “Singer heavy duty household needles 7”. I tried #2 at first but it broke because I was pushing on the back of it with a thimble too much. So I did that much less with the second needle.