You need to purchase the other end of the quick connect, then use the adapter on that. On another note, this will work, but will be very bulky and cumbersome to work with. You might want to think about purchasing a pump made for airbrushing. There a tons of options, below is a link for one from Amazon to give you an idea. You can find them cheaper or more expensive, but they are made to be lighter, quieter, and work well with the airbrushes, including the hoses and connectors. Lastly, remember to get a filter to keep moisture out of the line. Good luck!
Not an expert with dolls, but a good "candy" paint will give you the advantage of a bright color. Really with an airbrush any red will work, you can just get a transparent paint and keep adding layers until you get the color you want.
Here are the exact coupler ends I'm using 1/4 Milton 783 T style or automotive type. Since my high flows didn't fit and I haven't gotten around to changing out the couplers on the compressor. Milton 783 1/4" MNPT T Style Plug - Box of 10 https://www.amazon.com/dp/B001O2UABC/ref=cm_sw_r_cp_apan_glt_fabc_RQBH5DQB11N637S35DPK
Of course you don't need to buy that big pack I was only posting the link for reference.
I get most of my paint here.... https://www.airbrushstore.com/ And just order a few everytime I order paint. They have it listed at 11.60. The price may have changed since their catalog is from 2017 but I'm guessing not by much. I don't ask....I just throw a few onto my order when I call.. But even on amazon they're listed at 13.38. The nozzles on the hp-cs are close to $30 though, but I very rarely have to replace one of those.
Get one of these.. https://www.amazon.com/dp/B0182JWJ0O/ref=cm_sw_r_cp_apa_glt_fabc_TEN0NPKZ6XG363GGH1SC
I didn't pay that much, but this is the one I have. There are cheaper ones. Once I started using this for cleaning I started using way less nozzles. You know how we all all push boogers through the nozzle with the needle .....it wears it out quicker. when I feel it getting spongey I blast the blockage out through bottle hole, and sometimes I'll just pull the trigger back (no air) and spray through the front of the nozzle. Clears it out in seconds.....no disassembly. It pays for itself pretty quickly imo. We all inevitably get paint on our hands and put a thumbprint on a shirt or something occasionally.....this thing will blow it right out.
I don't have much more of a recommendation other than me saying the compressor in this kit has lasted me a year so far and I have no complaints with it. You can absolutely find better ones, but I'll ride this one till the wheels fall off because I have it.
Small warning, Badger stuff doesn't use the standard 1/8" compressor fittings, so plan to have the right hoses or adapters on hand!
TaoTronics make good pure color light for painting and is recommended often for painting. I would also suggest a Master Spray Booth (linked below), many here have them and depending on the model they come with a light system built in which is good because you don't get shadows like you would with a light outside the booth.
How much ventilation you need depends on what type of paint you are spraying, with acrylic you will be fine with a booth and mask, with that big of a space you won't ever really need to open the garage door even. How much you need also depends on how good your filter is on the booth.
https://www.amazon.com/Master-Airbrush-Portable-Lighting-Extension/dp/B00NLQ019A
Yes you will want primer and a clear coat. I'm a total novice, but everyone has different preferences when it comes to brand so I'd recommend you get a couple colors and a primer to test it yourself.
I typically use this as primer https://www.amazon.com/Vallejo-Grey-Primer-Acrylic-Polyurethane/dp/B005HXHNPA/ref=sr_1_24?dchild=1&keywords=Vallejo+Paints+Airbrush&qid=1605304326&sr=8-24
You don't want black unless you have a specific reason since its harder to brighten from black then it is to darken from white.
I started with a variety pack of colors and typically end up mixing to get the exact color I'm looking for.
If your using a FDM printer you should really look into some filler primer.
I had the same problem. After being overly aggressive, and ruining some nozzles (they aren't cheap) I use these little dental cleaners. They work great and the tiny brushes won't damage your airbrush.
Well, I ended up getting a nail polish rack from amazon that is exactly what I was looking for. Anyone interested, this is what I went with: https://www.amazon.com/Cq-acrylic-Bottles-Rack-Clear-11-5x9-5x7-5/dp/B06WVN2KJH/ref=sr_1_1?ie=UTF8&qid=1539905691&sr=8-1&keywords=Cq+acrylic+48+Bottles&dpID=51jqyEPWJLL&preST=_SY300_QL70_&dpSrc=srch
My mission models paint bottle fit great. Vallejo paints will fix with room. And the wicked paint bottles fit as well. Easy to see the color, not as easy to read the labels as a spice rack, but perfect for a shelf or desktop.
1) yes it will work just fine, and it should have everything you need right out of the box.
2) gauge + regulator or gauge + regulator + water trap. Bare in mind that all the inputs / outputs for those are 1/4 NPT, check with your manual / compressor to see if you'll need an adapter. Also, while knowing your pressure is helpful, it's not strictly necessary. You can tune in the pressure just fine by seeing how it sprays then adjusting the pressure accordingly. If you do get one, get the one with the water trap - not only will it tell you the pressure, but itll also pull unwanted moisture out of the line.
And finally, a little tip - always do a quick test spray on some paper towel or scrap paper before spraying onto something you actually care about. Better to find out you have too little pressure or too thin paint on a piece of scrap than on a mini.
The cleaner is only appropriate for Vallejo and maybe others marketed as water based. Not for Tamiya and others like it.
The compressor is fine, it does have cooling fans. The potential problem with this type is over heating because it has no pressure vessel, a tank, so it is always on when you spray.
The airbrush is fine, you can always upgrade to a branded one later.
What you get with a branded one is smaller tolerances on paint channel parts, better seals (more resistant) and part availability.
Only think I would have changed is a compressor with a tank, as it will only switch on when paressure in the tank drops from 4 bar to 2.5, so you have less wear and tear and less noise.
Warm water will also be good for cleaning the same paints as you would use with that cleaner.
I would get an airbrush stand and a quick connect 1/8"
You should try out different paint types before investing further into one brand
This will give you a good impression of this one specific and lacquers, the thinner
I spent quite a lot on Vallejo, then I tried Mr Hobby and Tamiya, never used the Vallejo again : )
I'm using this one from Master Airbrush. It's very quiet when running, and the larger tank means it doesn't turn on nearly as often. Not sure if they're available in the EU, though.
If your unit is Chinese made, the control module is pretty universal. See how close this one is. https://www.amazon.com/LF10-4H-Pressure-Compressor-Replacement-Control/dp/B0B1F5FNMZ/ref=sxin_20_pa_sp_phone_search_thematic_sspa?content-id=amzn1.sym.82908ec8-0619-4762-b669-23701f052cfa%3Aamzn1.sym.82908ec8-0619-4762-b669-23701f052cfa&crid=A...
The problem with the B&D you link to is that it just blows air, you have no way of regulating it. Then you need to look at how the hose is connected and connect an airbrush hose, or you need to look at how the hose terminates and find an adapter....
If you get that far you need a regulator, preferably with a water trap... It needs to somehow build pressure, I don't think it can on its own.
Even then with the auto off, it is a crap shoot if the way it works is compatible with an airbrush, as in will the pressure be precise from when you start spraying or will it need a second to build up the pressure....
A random used compressor with a tank could also do the job, but a shop compressor can get up to 96 db, where as the one I linked is only 50db
Thanks for your responses.
In that case, if you're the handy sort, you basically make a spraybooth out of the tub and bathroom fan, like I suggested, and have it vent into, and through a filter medium, like a furnace filter. Not ideal, but would help control the dust and fumes.
I would also consider wearing some sort of mask to avoid inhaling any errant fumes.
Another option is to buy one of these model booth and connect the end of the hose to a filter. I have one of them. They're OK, but too small for anything other than a model car, which means it should work well for you.
If you do continue down the rabbit hole of hobby airbrushing, you might want to get some dedicated equipment for the airbrush. A hobby compressor, while expensive, is also very quiet. I used a small shop compressor prior to getting a hobby compressor, and it was freaking loud (it was also really cheap). My hobby compressor is quiet enough to have a conversation while it's running. I also found that, for how I spray, I much preferred having the control of designing my own spray booth, and having a dedicated space with dedicated ventilation to the outdoors to make it easier to prep and clean up after painting.
Make notes as you airbrush. Take note of things you'd like to improve, and make notes of things that are going well. It will help define what you need.
I have the HP-CS and an older HP-C and they're a fantastic airbrush. I wouldn't call myself an expert on them but both of my Iwata brushes work great.
If you're just starting out, consider this:
https://www.amazon.com/dp/B0B757WWD8?psc=1&ref=ppx_yo2ov_dt_b_product_details
​
It's a cheaper brush and works well, plus a whole lot of options. This way you don't spend a ton of money then find oout this isn't for you.
>reservoir
there is only one tank. it looks like this. https://www.amazon.com/Master-Airbrush-Multi-purpose-Dual-action-Compressor/dp/B001TO578Q
however ive fixed the problem halfway. it was too cold in the room i was in. after moving to a warmer room, it now runs longer. but maybe i have misunderstod how this compressor is supposed to run? i thought it was supposed to be running the whole time, but as it is now its just turned of untill i start spraying and then the compressor turn of again when im done spraying.
Picked this up from Amazon - has everything:
https://www.amazon.com/dp/B09G3GLRSY
Plumbed some PEX to my basement and viola! I have a remote air station connected to my shop compressor.
I had this same break occur, on a lark I sent the destroyed shell to a friend with more soldering/welding experience than me. However they couldn't fix it, the seal always leaked air and barely sprayed water even with the compressor cranked.
If you want to fix it, you can purchase a new shell here however since this is the 3rd or fourth break of this exact kind, I think Badger's quality is just crap now. But if you decide to replace the shell, you'll need to take off every part from the airbrush including the air valve. I had little luck removing the air valve from the damaged shell and bought a replacement one here. But that's in the ballpark of $55 not considering shipping from USA Airbrush Supply. I spent I think $60-something all said and done to fix this because I couldn't afford a different brush. But if you can I would suggest you buy something else.
On an unrelated damage to the brush early in it's life, I tried the badger customer support/warranty. It took about 2 months, and I had to send several emails to actually get it returned. They took the entirety of the $21 check I included, so add that to the cost of shipping it to Illinois. I have no idea if the warranty would even cover this extend of damage though, or if the $21 would cover the "cost of parts" or whatever they decide to charge.
That's what I have in there and they hold up fine. These are better for lacquers
https://www.amazon.com/gp/product/B08CN5VNR3/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
which I also have
I've used these for storing my pre thinned paints and they work perfectly.
https://www.amazon.com/dp/B07KZK6JRW?psc=1&ref=ppx_yo2ov_dt_b_product_details
I have this one, picked it up a while back. Seems to work very well, and is very quiet in operation.
it's missing parts. it needs a needle and the nut that holds the needle in place and the rear cover. the needle/nozzle is about $14 and the parts kit is about $16 on amazon and a whole new airbrush of a similar design is $30. https://www.amazon.com/stores/MasterAirbrush/ReplacementParts_Airbrushes/page/EAE84C07-B84C-4E4A-B770-CCF4FE9EF054
Also, if your hose creeps and gets too loose on the airbrush side, just chop off the end and stick it in again. For easy clean cuts, use a tubing cutter like this https://www.amazon.com/Pieces-Cutter-Accurate-Cutting-Plastic/dp/B08CK6ZM6N
I'm looking at this set currently:
https://www.amazon.com/gp/product/B0B757WWD8/ref=ox_sc_saved_image_4?smid=A3VPPE53X8CTHE&psc=1
This is a hell of a deal and should get you back up and running with quite a few extras. That is if you're willing to do non name brand.
Remember that the high volume air flow only really matters if the paints are "hot" solvents like acetone and the like.
That fan is a beast, those are double the price where I live. It will outperform anything on the market for home use.
I watched a video about airflow, and for each bend you loose a lot of airflow, just mentioning in case you want it maximised.
For the filter, just use something with least air resistance, most shops sell replacement filters for the booths, I think if you vent it to the outside, the 3M is overkill and will eat up a lot of air flow.
Even a perforated material like a fine mesh will work.
I have seen some booths that have a very shallow water bed, then the dust in the air gets captured.
I did put a lot of thought into building one before I got mine, and I thought about putting something like the cheap filters on the sides. I find that no matter what, some spray will bounce back from the sides, maybe a that could prevent some of it.
But you have a very nice setup with that fan.
For a venting solution I bought a 390 CFM inline Duct Fan
I opted to build my own as I can build it to my size needs. Most retail booths are tiny and overpriced and not that good. A quote by my local airbrush store.
Sounds like the fan doesn't matter and a good furnace such as a 3M product will meet the needs. I bought a smaller version at a local hardware store but same rating.
https://www.amazon.com/Timbertech-Professional-Upgraded-Airbrush-Compressor/dp/B07VT2F5N9/ref=mp_s_a_1_3?crid=3QSSCZKC52QVI&keywords=timbertech+compressor&qid=1665522637&qu=eyJxc2MiOiIyLjgxIiwicXNhIjoiMi4wMyIsInFzcCI6IjEuODkifQ%3D%3D&a... this $80 compressor, a standard 1/8” hose will run you about 10-$20 plus an iwata eclipse. That’s a perfect setup
Great! Thanks! Would maybe something like this work as well?
I bought this kit and I think it's good for beginners. I do plan on some upgrades in the future, but it works well for starting out.
Not very expensive either: https://www.amazon.com/Badger-Air-Brush-Company-Complete-Assembled/dp/B000BRH5UU/ref=sr_1_1?crid=3ACKF4V203GUK&keywords=badger+105+air+valve&qid=1664943931&sprefix=badger+105+air+valve%2Caps%2C94&sr=8-1
Grab a rag and some pliers (Towel to protect the finish, pliers to unscrew the assembly, then put this one in, done deal.
Pick up a spray-out pot:
Eliminates overspray when cleaning out & between color changes, plus acts as a stand holder!
I'd say skip the kit and get the compressor and airbrush separately. A decent compressor will be a good investment. I have this model from Master Airbrush, and I like it. It's very quiet even when running, my wife can be in the next room and it doesn't bother her at all. Price isn't crazy either.
I agree with the recommendations for the 105. Later, once he has the basics figured out he can upgrade to something else. He will need a respirator, and a spray booth would also be an excellent idea. Booths are available in many different sizes and prices, so you don't have to spend a ton of money to get started. You can even build your own if you have the tools for it, it could be a nice father/son project (I have some videos bookmarked on this I can share if you're interested).
You don't really need it, when/if the trigger becomes stiff, some silicone grease can be used on the trigger/air valve. That is the only place where you could need it
Some people use grease substances on o-rings and threads both to ensure airtight connections and to protect certain rubber types from solvents.
I would never ever introduce oil into my airbrush, but I have some Tamiya Greasa and Sealant that I use for the trigger and airvalve (the small rod that gets pushed down) once a year, so it will last a life time. It feels much like Molykote 111, a foodsafe silicone grease.
I have used it one time when I had problems with an o-ring, it sealed it up perfect.
I have seen people say that if you are using water based paints you only need the particulate filter, but IMO you should not fuck around as far as your lungs are concerned and go for the P100, if you are using a 3M elastomeric respirator style mask, these are the ones you want: https://www.amazon.com/3M-Organic-Cartridge-Respiratory-Protection/dp/B07GGNQCBD
https://www.amazon.com/GSI-Creos-Procon-Trigger-Airbrush/dp/B0007U92MU?ref_=ast_sto_dp
This should fit your bill. The nozzle size will help with the thicker viscosity materials and it comes with a fan cap for the large coverage you seek. It also has a large volume cup with the ability to change it out for larger or smaller sizes. I own one of these and love it, great bang for the buck.
https://www.amazon.com/gp/product/B09229X52P/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
I use these to filter my acrylic paint after I thin it. They are sold as resin filters but work great for my cheap paints.
I am guessing I need something like this : https://www.amazon.es/Desconexi%C3%B3n-Acoplamiento-Liberaci%C3%B3n-Conectores-Accesorios/dp/B08X4K664K/ref=sr_1_17?__mk_es_ES=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=O3JQMQFO92X7&keywords=valvula+compresor+airbrush&qid=1662556430&sprefix=valvula+compresor+airbrush%2Caps%2C110&sr=8-17
If you do not already own a set I would recommend picking up a set of small pipe cleaners like the ones in this link. Also I would recommend using some clear windex to clean the airbrush. Plug the front with your finger and pour/spray enough in the hopper to fill past the hole. Then just let it chill for a bit so the windex can break down the paint.
This one? https://www.amazon.com/GOLDEN-Acrylics-Titanium-White-Bottle/dp/B00E4PLGUU I think I have this one lying somewhere.
I use this one: Timbertech Upgraded Airbrush... https://www.amazon.com/dp/B07VT2F5N9?ref=ppx_pop_mob_ap_share You can probably find one similar in your market.
I keep this on the floor. I don’t live in an apartment, but the room I airbrush in shares walls with a baby and my wife, who’s usually asleep. It hasn’t woken them up once.
I would look at decibels when in use. This model is 50db. This website has a chart with noise levels translated into sounds you might understand: https://www.rfcafe.com/references/general/sound-level.htm 50db is an urban residence, quieter than a 3 person conversation and a little louder than a whisper from 3 feet away. When I close the door and listen from the outside, it’s just a light hum.
If you’re worried about downstairs neighbors, you could put something under it.
The paint is from Meeden, I bought the 24 color set. I will look into buying some beads to add into the bottles.
It's directly below my bedroom and the wife says she doesn't hear anything.
It's a cheapo compressor but when I was looking into the whole thing, there was a lot of good things said about them. There was even a good handful of top name YouTubers who use the as-186 or at least started with one.
As far as function goes, mine works just fine and came with everything I needed to try airbrushing although I immediately upgraded to an eclipse because I was sold on the process and the brush it came with is absolute garbage. It's got a tank and I wouldn't want one without it
Good choice on the airbrush.
Do get a good mac valve. And I can recommend this compressor, if you have space limitations. The tank is in the handle, so it takes less space and still gives the benefits of having a tank for steady air pressure.
This is the model when I first got the tank I had NO idea you had to release the air and drain it. the trap has been replaced with a passche model.
I would definitely return it as defective. If you are going to stick with Master I would have recommended this kit. I bought that compressor a couple of years ago as my first compressor. It still works to this day and is pretty quiet. I use a tanked compressor now but the Master still gets used from time to time as an auxiliary.
You can use this kit to take the last to adapters shown to connect the two hoses together. Adapter kit Don't forget to use teflon tape if you have it.
Airbrush Quick Release Coupling Disconnect Adapter Kit, 5 Pieces 1/8 Inch Female Connectors and Male Adapters Adjustment Control Valve Airbrush Accessories for Air Compressor and Airbrush Hose https://www.amazon.com/dp/B08X4K664K/ref=cm_sw_r_apan_i_FZX52Y533DPVEH16WHZJ
Badger Air-Brush Co. 51-038 Quick Disconnect Plug https://www.amazon.com/dp/B000BPOJCO/ref=cm_sw_r_apan_i_Q8V4B6DEGY4MJA7ADE2E
The female coupler is a cheapo and will wear out eventually. Buy an iwata coupler and it'll longer.
Myself I think it is too pricey for the size, and it has no tank, so it is always running, getting hot, or looses pressure…. I have a California air tools, so far it is solid. I normally use it for art/ illustration, 3-4 hour sessions…. https://www.amazon.com/California-Air-Tools-CAT-1P1060S-Compressor/dp/B01LYHYHEA/ref=mp_s_a_1_5?crid=2RH4WJL5559X2&keywords=california+air+tools+ultra+quiet+air+compressor&qid=1654112462&sprefix=california+air+tool%2Caps%2C161&sr=8-5
That's a pretty good starter brush. I bought one a couple years ago and it was pretty good to learn on. I even gave it away to a friend who primarily uses single action siphon feed airbrushes to get acclimated with.
I use the cat-4710sq, which runs at 65 decibels or 9 decibels more than the cat-1P1060S, ie it's almost twice as loud. It's quiet enough for me. I listen to videos and podcasts while I airbrush. Besides, once the tank is full, the compressor only runs for a minute or so every 20-30 minutes of miniatures priming.
I bought the Master Airbrush Premium 6 Foot Nylon Braided Airbrush Hose:
https://smile.amazon.com/gp/product/B001CJHZXS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Yes, the compressor is overkill, but I've been able to blow up beachballs and such for the grandkids -thank God.
I have a Neo airbrush that is a better piece of kit than I am a painter.
For compressor, I actually went with a Timbertech to replace an old generic hardware store brand one, and it is ultra quiet. I haven't run it long enough to speak to the durability, but reviews from other airbrushers have me confident, and the volume and built in features (moisture trap, regulator, etc) all make it a good choice for me.
I went with a more high end airbrush as cheaper products typically break and you have to buy another anyways. Went with a Harder & Steenbeck - can't remember if this was from Amazon but there's like elementgames, waylandgames etc
For a compressor I found it hard to find info about good ones as most were recommended by American. Found this in the end and it's working pretty well so far
Fengda Airbrush Mini Compressor... https://www.amazon.co.uk/dp/B019CKXBOU
You just need a badger to 1/8 adapter. Below is one example of what you need. There are tons on Amazon but I would also suggest a quick disconnect. Airbrushes have a tendency to multiply
https://www.amazon.com/Impresa-Adapter-Badger-Airbrush-Connect/dp/B09GV9TNJ3
imyyds Airbrush Kit with... https://www.amazon.com/dp/B096B22YCB?ref=ppx_pop_mob_ap_share
I just picked this one up for $70 USD as a starter. The battery/compressor lasts around a hour and puts out a steady stream of air.
Here's a review from a miniature painter. https://youtu.be/isqaylQTunQ
Yeah, it says that on the label too. It has a 0.4 nozzle, 20-32 psi. This is the one I'm reviewing now.
https://smile.amazon.com/dp/B09MS47XFM/ref=cm_sw_r_apan_gl_i_KY1N7F7EZ0XSW46ZNJS3
I just checked and my other brush has a 0.3mm nozzle so that might explain why they were clogging.
I use the 51-038 QD plug by Badger.
Mates perfectly to my Iwata QD coupler that I use along with other brushes.
Thanks for the reply. The hose I have now, is the 1/8th.
This one: https://www.amazon.com/gp/product/B08R3MQN8W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
And the brush side, is way to big to fit the brush. The threaded connection on the brush is super small. Like, HALF this size...
I agree with the recommendation of a an iwata eclipse hp-cs.....there's not much you can't do with one. It would be a very long time before she might need something else, if ever.. If her interest was in painting tshirts I would have recommended a siphon feed....probably a paasche vl3 to start, or an iwata hp-bcs if you want to go all out.
I'm not a fan of "airbrush" compressors and usually recommend a CAT California Air Tools CAT-1P1060S Light & Quiet Portable Air Compressor, Silver https://www.amazon.com/dp/B01LYHYHEA/ref=cm_sw_r_apan_i_VF6K9XC9DNTCVGX974MT?_encoding=UTF8&psc=1 You get way more for your money. Not as quiet as an airbrush compressor but still pretty quiet compared to other options.
I never had much luck with Createx paints in that setup. Their paint specs recommended 0.5mm nozzle or higher. I never used the siphon feed much but the 2 gravity feeds are 0.3 and 0.2. When I was learning how to airbrush it was so frustrating because that paint would clog the nozzle in no time. Sure, you can thin them down but I usually ended up with a runny mess.
I'm a big fan of Vallejo Model Air paints for plastic models. That stuff works mostly effortlessly.
I also recently discovered Golden High Flow Acrylics and love it so far. I was watching a documentary of the Smithsonian's restoration of the Enterprise from Star Trek and noticed a bottle on the table and thought if its good enough for that project, it's good enough for me. Amazon link
I bought this PointZero setup in 2017 for $81. No regrets whatsoever.
Sadly, it shows no longer available from Amazon but I'm sure there are very similar kits. I've since moved on to a Makita compressor and an Iwata Eclipse HP-CS and Badger Patriot 105 airbrushes but everything in the original kit still works great and got me into the hobby at a very affordable price.
There might be 2 or 3 that don't work all that well,..the ones I use the least. I've talked about it here before......this is my secret weapon. CKPSMS Brand -Textile Spot Cleaning Gun for Screen Printers/Cleaning Crystals and Rocks 110 Volt #KP-170A 110V 1SET https://www.amazon.com/dp/B077N2KJSR/ref=cm_sw_r_apan_i_EW7XS946BJZ6H831R7RD
Idk if this is the one but it looks the same. The bulk of my cleaning on these guns is just spraying acetone with that thing into the siphon hole with the trigger depressed and pulled back all the way, and spraying into the nozzle from the front with the trigger pulled back and not depressed. If paint gets through the needle bearing or the trigger is sticking I just spray in the trigger hole. Occasionally I'll remove the needle, point the gun straight down and spray into the chuck., or remove the head and spray through the nozzle. I almost never disassemble one.
I've used that on a gravity feed but usually I just I just use water or reducer or lacquer thinner, depending on the paint, back feed into the bowl,, wipe the bowl out with a paper towel or stir around in it with a paint brush, until it runs clear and that's about it. I'll disassemble if necessary but it's not very often.
Looks like the price has gone up 30.00 recently, but this is the smallest fairly quite compressor I've used in recent years that I can recommend that cost less than $400 to $500.
California Air Tools CAT-1P1060S Light & Quiet Portable Air Compressor, Silver https://www.amazon.com/dp/B01LYHYHEA/ref=cm_sw_r_apan_glt_i_DJXH6QJYYV0R2VE2K2B2?_encoding=UTF8&psc=1
You'll see a lot of smaller cheaper quieter ones recommended and they're fine for a lot of things....probably not enough for doing tshirts though.
Yeah, I've had that thought too. The trick would be coming up with a way attach and change out appropriate size brushes.
I use one of these with acetone.
GENUINE ARROW SPOT CLEANING GUN https://www.amazon.com/dp/B00CMFMSB0/ref=cm_sw_r_apan_glt_i_BR3WGW9502MPWD3TEYA2
Best thing I've found so far. IMO it's s must have if you're a tshirt painter doing events where every minute counts, but I've used it on my gravity feeds too. Just be careful not to splash yourself in the eye or hit yourself up under a fingernail.....or even hit a finger. That thing has a ridiculous pressure. It's easily paid for its self several times over just from the number of shirts I've saved from having dirty hands.
Sounds like it may make more sense to buy something like this then: air tank kit
Does that seem like an ok deal?
This is the one I bought: vivohome airbrush
I don’t see a way to add a photo on mobile at least
Still confused about the Badger Air Hose Fitting for the air compressors? Our newly-made Badger air hose with 1/8'' BSP Fitting on one end as well as 1/8’’ Male to 1/4’’ NPT Female Air Compressor Adapter offers you onestop solutions to your airbrushing.
Pls find us on Amazon: https://www.amazon.com/dp/B09PMZKZ4Q?ref=myi\_title\_dp
I have bought 5 of these over the years, dirt cheap, https://www.amazon.com/dp/B002KJDXHQ?psc=1&ref=ppx_yo2_dt_b_product_details
​
Its not great but it primes and base coats
Iwata-Medea Eclipse HP CS Dual Action Airbrush Gun / Gravity Feed https://www.amazon.com/dp/B000BQKFAI/ref=cm_sw_r_apan_glt_i_9RKHBH7RQAFQFDJ774Y5
California Air Tools CAT-1P1060S Light & Quiet Portable Air Compressor, Silver https://www.amazon.com/dp/B01LYHYHEA/ref=cm_sw_r_apan_glt_i_QQF3CJCJZ8HY7PV2DGV3?_encoding=UTF8&psc=1
Never used a setup like you posted but I can't imagine any way it'll get the job done. What I posted would be my recommendation, but you can probably find some cheaper options that'll work. Kinda depends on if you intend to just paint some stuff for fun or if you're committed to doing quality work.
I use a Master Airbrush Cool Runner II for my airbrush and the air assist on my Ortur laser. I dial down the pressure quite a bit for the laser (down to 15-30 psi), and the only major hurdle I've had was finding a way to connect the compressor's hose to the laser's air assist hose. All the connectors available at hardware stores were for bigger hoses, so I ended up using a barb splicer with two male ends and just cutting off the non-tank end of the compressor's hose.
I'm going to try vinyl stencil transfer paper (or even low-stick vinyl). They make it for Cricut and Silhouette Cameo 4.
https://www.amazon.com/gp/product/B07KPB38LK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
There's a variety of stencil paper you can try, with varying levels of adhesion. I ordered a sample pack of about 5 to test out. I'll make a post if something works.
Depending on your technique and tools, a lot of artists get away with just plain paper. They work small enough that overspray isn't an issue for them. The paper is just taped to the canvas, or sometimes held on with magnets.
Also something I've looked into was auto masking fluid. You buy it by the gallon and spray a coat on. I think that would be too thin or would destroy the canvas/paper surface, but it's still something I want to try experimenting with.
Get a nice easy to use and store airbrush boot. I'm sure you have a window so get one of these set-ups. I have this one and just put a piece of pre-cut cardboard in the window gap.
https://www.amazon.com/Anesty-Bright-Lights-Filter-Portable/dp/B08RHWN398/ref=sr\_1\_7?crid=3PB55115WQK4N&keywords=airbrush+booth&qid=1644167194&sprefix=airbrush%2Caps%2C164&sr=8-7
Master Airbrush Premium 6 Foot Nylon Braided Airbrush Hose with Standard 1/8" Size Fitting on One End and a 1/4" Size Fitting on The Other End (Hose Color May Vary) https://www.amazon.com/dp/B001CJHZXS/ref=cm_sw_r_apan_glt_i_8TXN5KB4FYSMAXY2E7DX
6' Braided Airbrush Air Hose with Paasche & 1/4" Fitting Ends Regulator Compressor https://www.amazon.com/dp/B002FDXM96/ref=cm_sw_r_cp_api_glt_i_6NSB8YKWZQMPEQRXK2JC?_encoding=UTF8&psc=1 How does that one look to you??
Honestly if you're going for cheap, get a battery powered compressor and airbrush combo on Amazon. Get one with the hose attachment and you can use it with other airbrushes later on if you buy more. Something like this or like this, they're all the same Chinese made compressor. Don't buy from spray gunner, they resell the same thing as these Amazon shops and take the extra cups out of the regular airbrush style kit. I got one similar to the first link and it works pretty well, not as nice as my Badger Krome but well enough and I can paint inside with much less setup.
those works great too for nozzle cleaning brush
Both my airbrushes are Harder & Steenbeck. elvolution al plus and a colani - i got one of these cheap china sets exactly like this in my local art shop in singapore. Works great. also, POINTY quito/cotton swabs are BRILLIANT.
This is what was recommended to me to cover tons of things I do. Couldn't buy them last few years. Should last along time.
3M P100 Respirator Cartridge/Filter 60926, 1 Pair, Helps Protect Against Organic Vapors, Acid Gases, Ammonia Methylamine, Formaldehyde and Particulates https://smile.amazon.com/dp/B009POHLRC/ref=cm_sw_r_apan_glt_i_47DHT246V0CASGR141RJ
There are some that fold up very compactly, roughly to the size of a shoebox. They have a fan and a flexible venting hose, and filters to catch the dust. If you're using solvent-based paints, or paints with a lot of VOCs in them, you'll still want to vent outside but at least all that means is opening the window a little, rather than being outside in a cold garage.
Example of one: https://www.amazon.com/Portable-Airbrush-Paint-Powerful-Delivery/dp/B09M6WG7H9
These are generic, so shop around for a good price. Usually they are somewhere around $100.
What I've seen people also do is buy a cheap cabinet from Ikea, and modify it to have an extraction fan, filters, etc. and that's a good option is you spray larger things, but living in a tiny apartment I don't have room for a huge, dedicated piece of furniture like that.
You're right about the dust build up being an issues when spraying inside. I did eventually buy that portable booth from Amazon and it is noticeably less dusty in my hobby area. Now you don't have to purchase a booth, the DIY options are easy enough as well. Either way having some kind of air flow that pulls any over spray into a filter is always helpful.
My friend borrowed my paintbrush kit recently. When he returned it he told me it had a defective safetly relief valve. I dont know much about these things so hoping I can figure out here what size exactly to replace it with. How do i figure out the size i need as well as the right PSI?
I found a spray shelter like this one on a used online marketplace for pretty cheap. It has openings at the back to use with a box fan and an HVAC filter. I have mine in front of a window to exhaust outside but since the shelter is portable maybe you can relocate when you want to paint? Otherwise, I think the filter might be enough to catch the particles and it'd be okay to exhaust back into the room. Acrylics don't have any toxic fumes to worry about.
For plastics u need to scuff the surface to create the mechanical bond. If you find that your primers still do not stick to the plastics then the reason why is because of adhesion.
Most materials will not stick to plastic longterm unless you scuff sand the plastic, spray an adhesion promotor, then spray primer. U might be able to skip the primer step by just using the adhesion promoter spray alone since this acts like a glue for the paint to stick to the plastic.
Bulldog Adhesion Promoter, 15 oz. Aerosol https://www.amazon.com/dp/B00397QK4G/ref=cm_sw_r_awdo_navT_g_YDYP0762BQM9KHG4ZWDN
Going to follow for the suggestions, I'm looking also for one. Thinking of this one?
California Air Tools Cat 2010A Ultra Quiet and Oil-Free 1.0 hp, 2.0 Gallon Aluminum Tank Air Compressor, Silver https://www.amazon.ca/dp/B00TDNKBMC/ref=cm_sw_r_apan_glt_i_49N00ZXJDP2KF5RVW8FK
I have a big beard.
I'm able to get a good seal with a full face mask.
https://www.amazon.com/3M-7162-Full-Facepiece-Spray-Respirator/dp/B0002STR86
In my youth I used shitty PPE and now have a strong sensitivity to isocyanates found in automotive paints... if I get any exposure, even on skin, I will get sick for weeks. I'm now painting in full suit with hood and full face mask and obviously gloves. Not getting sick, so the seal seems to be working well enough that it's easier for air to travel through the cartridge filters than to work it's way around the seal by my beard.
Here is the one I use:
Master Airbrush Brand Lighted Portable Hobby Airbrush Spray Booth with LED Lighting for Painting All Art, Cake, Craft, Hobby, Nails, T-Shirts & More. Includes 6 Foot Exhaust Extension Hose https://smile.amazon.com/dp/B00NLQ019A/ref=cm_sw_r_awdo_navT_a_5HV6XN6XCK1D9GW9CCQ5
Only negatives I can find is:
I bought this because I was mainly doing miniatures. Like Games Workshop size or 3D prints. If you do larger stuff then this isn’t feasible.
The LED lights shown here are three pieces that snap together (power connect) and can be finnicky. Meaning that having used this now for four years (I was wrong - I told you two but looking at my purchase date I’ve been using it much longer) the lights sometimes have connection issues and you have to work with them to get them lit.
The filter material in this doesn’t have to be bought from them. Its standard filter materials you can get from your hardware store if you want to go that route and save a little.
A MAC valve is another option to consider.
You'll want to find one in the right size for your brush connector as I'm not sure on BSP to NPT threading conversions.
Following what /u/mushious said this is what I bought https://www.amazon.com/dp/B0924LGFR2, Someone can chime in if they know a better price for it but it was the best that I found at the time and it works great. I also have Badger Patriot 105 so just remember to also buy the 1/8th to 1/4th hose adapter which Badger oddly names the Iwata adapter.
I got this one and i love it. it's portable and folds up like a suitcase.
What about my air compressor?
I currently have the small black one like on this page: https://www.amazon.fr/Compresseur-Aerographe-compresseur-d%C3%A9coration-passe-temps/dp/B07PGSLPHK/ref=sr_1_8?__mk_fr_FR=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=airbrush+compresseur+air&qid=1640314727&sr=8-8
Can go for 0-25PSI. Is it okay or should I invest into a more professional grade air compressor?