Don’t get an adapter from DDave. He literally just sells this adapter with
these 1” screens at a markup. He used to at least put in the labor of installing the screen but he doesn’t even seem to do that anymore
Scored this on Prime day for $20
It is an IR blaster so you can program it to control every button on the EQ remote.
You can then automate routines such as having it turn on 20 minutes before you get home, turn off when you leave etc and also use Alexa or Google to control it as well.
There were some even cheaper units but this one has a built in temp and humidity sensor which you can use for routines as well.
Because… why not lol
Link for your convenience
Upgraded Smart WiFi-IR Remote Control Universal-Hub with Built-in Temperature and Humidity Sensor,Compatible with Alexa for TV DVD AC STB etc https://www.amazon.com/dp/B08F3CJSTP/ref=cm_sw_r_cp_api_glt_fabc_Y8249TV6PWYJ1Q94BC6V?_encoding=UTF8&psc=1
-Yes, you need the stems. I prefer the bent one but operationally are almost the same. Maybe if some flower escapes from the bowl, the vent one catches it easier before it gets to your mouth.
-No need for screen. As a matter of fact, the screen screws with the flavor. The beauty of the solo is that the flower is in contact with glass only.
-Charger is a tricky one. The original is 12volts, 1.5 amps but the connector is not the usual 5.5mm like the one used by the mighty. If my memory serves me well, I think is 4.0 mm. Amazon sells some of those transformers with multiple connectors for about $12-15. This one might do the trick:
Good luck with it. I assume is used and probably needs new battery.
Burning them off works. I’ve used ISO before and it works well as long as you don’t wait too long to clean them. Otherwise you can get pretty cheap packs of them online. I’ve found some on amazon that fit good.
Just get Turkey-sized oven bags from a grocery store or Amazon. They're a bit bigger than the standard bag, but work great and you can always trim the bag size down if that's important.
By oven bags, I mean this product
Hey there! The first hit seems to be good imho.
One of the pictures has the dimensions of the valve. I took out the old tape measurer and the flow valve has about the same diameter als the glass eq piece that goes into the balloon.
I only have a bite valve and that works quite well. I did switch from balloons to the whip for my primary use so I haven't used it in a bit. Seeing this makes me wonder if we could also use that flow valve from camelback with the balloon. I'm going to look around and see if I can my my gfs camelback and butcher that thing.
Stay safe and happy holidays!
Huge link without format because mobile:
I haven’t ever cleaned the screens as I have tons of them. The stems get cleaned every 3-6 months depending on how dirty they are. I rotate a good 6-7 stems though, so they don’t get caked very quickly. I use alcohol or some orange stuff I bought that works well.
200 screens that fit the ArGo perfectly for $3.99 on Amazon.... 200 Beamer Premium 304 Stainless Steel Pipe Screens 0.375" (3/8") Inch Size...
Yes! Those exactly. For the price I like the i4. I use to to charge everything that takes a cylender type battery. It works well on the AA NiMH i use for remotes and my MFLB as well as 18350, 18650s and even 26650s I use for vaping, ecigs, flashlights, etc.
They also make another charger that PERFORMS exactly the same, but shows more information about your batteries and charge state and doesn't have such blinding LEDs called the D2/D4.
The tubes has a small hole in the bottom. Might be good to know before you have ISO all over the place.
I use a small glass lunch box for my ISO, and change it every 3 months or so and top it up when needed.
FYI if you get a bag mouthpiece with frosted glass it fits much better: Arizer Replacement Balloon Mouthpiece https://www.amazon.co.uk/dp/B082T31FJW/ref=cm_sw_r_cp_api_i_7NNAB3ARFWEF1JK13CR4?_encoding=UTF8&psc=1
SHNITPWR AC Adapter 120W Universal Power Adapter 4V 5V 6V 9V 12V 15V 18V 19V 20V 24V Adjustable Switching Power Supply 100V~240V AC to DC 4V ~ 24V 5A Converter with 14 Tips & Polarity Converter https://www.amazon.com/dp/B08N4R48LJ/ref=cm_sw_r_apan_glt_i_BKK5PPJ3RKY8S41M4PXM?_encoding=UTF8&psc=1
Just got my old tower up and running with this. Plus whatever else might come up.
These are the ones I buy: https://www.amazon.ca/Premium-Silver-Screens-Tobbacco-Filters/dp/B01KPTDSPO
Just 1 screen per stem. I lay it flat over the top of the stem, then push down with a pencil to make a dome. Fits perfectly inside. I only use them filled up, so not sure about micro dosing.
Sick man, cheers!! Do you put another flat screen on the other side of the dome one you push in, with your herb in between? Trying to get a few different opinions to work out the best way to micro dose like .05 at a time.
Also, I came across these, might be handy for you too: https://www.amazon.com/Screens-Arizer-Filter-Glass-BMTick/dp/B07P5DCTMD
Alright I nutted up and ordered these rubies, I'll report back once I get them
BERACKY 4mm OD Terp Pearls Balls Insert (20 Pack) https://www.amazon.com/dp/B0983DMH12/ref=cm_sw_r_apan_glt_i_NN3JM08GF1TVENG40YTH?_encoding=UTF8&psc=1
Sorry for the late reply! I went into my amazon history and found the listing. You are definitely correct about it being Stanker, not Anker - my bad! Anker is the brand we buy for our phone chargers haha
I got these and they work great. I am not even able to tell which ones came from arizer and which were from Amazon.
Stanker 15pcs 0.5 Inch Premium Diameter Stainless Steel Screen with Storage Box https://www.amazon.com/dp/B07L4HT1KM/ref=cm_sw_r_apan_glt_i_8FVMB574Q2RSM235K5E1?_encoding=UTF8&psc=1
Laboratory and Household Glass Adapter,Multifunctional Glass Adapter Connection,L Extender Adapter(2pcs,14male) (Size Two) https://www.amazon.com/dp/B09GRTKKDL/ref=cm_sw_r_apan_glt_i_RZMQCGFW3BNXRPRCCGAV
This is the link for 14mm elbows it uses 18 but I use these for bongs
i bought this one https://www.amazon.ca/HANIC-Female-Scientic-Glass-Adapter/dp/B089GY54Y5/ref=sr_1_9?crid=18HDFK8VIWB0U&keywords=18mm+female+to+female&qid=1642181362&sprefix=18mm+female+to+female+%2Caps%2C144&sr=8-9
cause this one wasnt in stock https://www.amazon.ca/Female-Expander-Reduce-Adapter-Connector/dp/B088WTWW1B/ref=sr_1_5?crid=18HDFK8VIWB0U&keywords=18mm+female+to+female&qid=1642181362&sprefix=18mm+female+to+female+%2Caps%2C144&sr=8-5
Tried it your way. I installed a 14mm silicone hookah hose grommet slid up to the first bulge. Fits with no leaks and easy removal with little glass to glass contact or breakage.
Cheap and handy to have around glass works.
Nothing smaller than a 14 to 18mm opening.
You'll need these grommets for larger than 14mm openings.
Poster putty also works.
The larger the 18 has a thin opening on the end you suck water can stagnate in it after use. See Curved Bubbler Bong Hydrotube -... https://www.amazon.co.uk/dp/B099K1D518?ref=ppx_pop_mob_ap_share just needs a 18 x 18 male for the Q. For the solo you can use this Bubbler Hydrotube & Adaptor for Arizer - Glass Adaptor & Bubbler for Arizer Solo 1 & 2 - Glass Adaptor & Bong Accessories (Hydrotube & Arizer Adaptor) https://www.amazon.co.uk/dp/B099K711RM/ref=cm_sw_r_cp_api_glt_fabc_D16Z27P1NAGG0ZEQAY7A?psc=1 you can also attach to the Q with an 18 x 14 male
I used discount coupons.
The Plenty is a bit messy to load.
Disappointing until I discovered fine ground works best and how to manage power to the heater. One click to turn on and preheat, when the heat light turns off, hold the lever to bring it up to your desired heat setting.
Best to use the top 2 heat settings.
Likely the most basic operation available today, but filling is a bit tedious for me with no feeling in my hands.
You may need a bed tray to fill and sit the Plenty down.
Suggest getting a Plenty stand too, it won't sit upright by it's self.
Also, get the concentrate pad for dabs or holding smaller loads in place on the screen.
BTW, there are vape herbs that clear and heal lungs, makes a great filler for stash too. I use mullein.
It also makes tea.
It really works!
Get yourself these. The shorter tube and the mouthpiece work wonders. I get bigger clouds and darker avb. Don't forget to pack loose.
Arizer70 Solo Glass Mouth Piece Air Drying Tube, 3-Pack https://www.amazon.com/dp/B07WJ2GGVX/ref=cm_sw_r_apan_glt_fabc_AJNK9Q0F56B2V415GRPS
It's been a few years since I ordered a bowl from Amazon and there areany options to choose from. Here's a place to start https://www.amazon.com/Chem-Si-18mm-Glass-Inlet-Adapter/dp/B07DXD5GN5/ref=mp_s_a_1_5?dchild=1&keywords=ddave+mod+arizer&pd_rd_r=f7c542b7-9311-4cf6-8048-998555630620&pd_rd_w=ncVW9&pd_rd_wg=hC4hz&pf_rd_p=ce028c81-ed8c-425a-8404-9...
Basically just search for 18mm female to 18mm female glass
Battery is toast, imo.
this is a good replacement - has 54% more capacity than the original pack.
I love my Solo. Love it love it love it!!! I want the ArGo next … to be more portable & discreet.
Additionally, I grew to love my Arizer Solo even more when I broke the curved glass vapor tube a couple of weeks ago and found a lot of great options for replacement available on AMAZON … and for much, MUCH less. I ended up getting a 4-pack of borosilicate glass vapor tubes (the exact curved/bent vapor tube from the factory, the shorter straight tube with a black mouthpiece, the tall straight tube, and a “shorty” straight tube) for $19.99 and a 30-pc pack of the glass borosilicate 8mm screens for $9.99!
Arizer Borosilicate Glass Vapor Tubes (4-pack Variety) - $19.99 @ Amazon
Glass Screens Filters 8 mm High Borosilicate Glass with Holes Honeycomb Holes Filter Screen, 0.31 Inch (30)
I got thermal tape from home Depot that's rubbery and works by sticking to itself and it goes up to like 220-230c fine (I dont fill bags higher than 210 so idk the exact # it goes up to) - I couldn't find the specific one I got but something like this - https://www.amazon.com/dp/B016ZMXLEI/ref=cm_sw_r_cp_apa_glt_fabc_HK2DC3YYSKERV00X6PF2?_encoding=UTF8&psc=1
I tried using one of the laptop adapter from reddit, but it worked just like the bunk Arizer adapter I got from them -- Er (or Eq?)2 error, then powered off, with the fan seemingly blowing.
Not sure how to get this to work again, but I really need to vape for my lungs and all of this CBD.
Not OP but we use a dental pick tool for daily cleaning/ clearing it out. Then we burn them off every so often (once every couple weeks, depending on how heavily it's been used)
Here’s what I’m thinking of storing the Argo in - I think it could tuck away while the Argo is still hot which I like. leather magnet case
I'm guessing your looking for an 18mm female to 18mm female adapter you will also need 1 inch pipe screens
its like a mini HydraVong:
I actually don't use my bags/balloons. If you want my mouthpieces for em let me know. They're also only $5.99 if you prefer a new one. As far as bags go, if you'd like you can try other kinds like oven or turkey bags. Also you might be interested in one of these to cover the mouthpiece or you could alternatively always just use an earplug or something similar.
I'm new to vaping and tried a Crafty+ and a Solo II, I prefer the Solo II and think you made a good choice.
I normally heat it up to about 195C and let it chill for 30sec or so before hitting it. I agree with the other friend about for long sessions starting lower and then increasing each bowl, like maybe 175, then a bowl later at 195, then maybe before bed above 200.
As far as cases, I bought one of these for my vapes: https://www.amazon.com/gp/product/B07JV9KF1Y/ Can store the charger and accessories in there as well, by forming the pick-foam to each piece. With vapes there are so many little pieces (stems, chargers, cable, unit itself, cartridges, etc) it makes sense to have a little box for all of it.
BMTick Glass Stem Pack for Arizer Solo 1/2 and Arizer Air 1/2 UK (5 Stems + 25 Screens) https://www.amazon.com/dp/B079HV44ZQ/ref=cm_sw_r_cp_api_glt_fabc_N5JB3FYKHY2PN96FP1MV?_encoding=UTF8&psc=1
Got mines from amazon. they also come with these domed screens that are dope
>What do you put in the whip to attach to the bong?
I have been using a Dynavap Fat Mouthpiece over the glass mouthpiece of the Arizer whip for ages. Best 3 bucks I put into the EQ. This will make the Whip 14mm compatible. If I use one of my 18/19mm bongs, I add a 14mm downsize glass adapter PLUS the Dynavap Fat Mouthpiece.
You could also go the extra mile and swap the Arizer glass mouthpiece out for a straight inlet adapter. Size 14, or 18/19mm, male glass joint and 10mm hose connection. Here is an amazon.ca link to the piece: https://www.amazon.ca/dp/B07CGXRH7X/?coliid=I1NKCVU9NKF9M3&colid=ZAZU23OUL771&ref_=lv_ov_lig_dp_it&th=1
If your Bong is the 18/19mm, you can also buy another Arizer elbow for the other end of the hose. >!(Two Elbows, One Whip)!<
I feel like taste improved drastically, could be just me though lol overall they fit and work great!
get it here
These are the ones I use: https://www.amazon.com/12-24-mil-Strength-MagicWater/dp/B01GR5X7MY/ref=sr_1_3?dchild=1&keywords=magicwater+12%22+x+24%22+bags&qid=1614709110&sr=8-3
Get yourself a pick set and try to get two 90 degree picks, or what fits, opposite each other under the glass ring and pull up together. You’ll need to try and bring it out level so it doesn’t jam. I would blow some compressed air through the intake on the back and then inside and wipe down with q-tips and isopropyl alcohol and blow it out again and repeat iso etc. a few times to get any remnant of glass out of there.
Scientific Glass Long Stem Water Filtering for Arize Pax2&3 https://www.amazon.com/dp/B07WG8MNQ8/ref=cm_sw_r_cp_api_glc_fabc_26a9FbKDWHZCQ?_encoding=UTF8&psc=1 This is great once it’s back in stock.
Sure thing, when it comes to battery safety it’s always better to be safe than sorry. Something like this is what I had in mind, should fit your case perfectly.
I’ve found this. They are a little thinner than the Arizer brand, but much cheaper. Unfortunately, I haven’t found any that are available for Prime delivery.
Chem-Si Glass Elbow Adapter 18mm Male Frosted Glass https://www.amazon.com/dp/B01M8F35LM/ref=cm_sw_r_cp_api_fabc_YVeYFbGPS05MR?_encoding=UTF8&psc=1
Yes, for sliding on the end of the glass mouth piece. The original CamelBak brand works best. The cheaper, multi-colored ones don't fit right .
You can get a ddave mod (most are sold out but some of the upgrade kits are still in stock) to improve performance with a shorter bowl, or get a 18mm Female To 18mm Female adapter and place a screen inside of it to replace the stock cyclone bowl. Using these shorter bowls brings it closer to the heater and improves performance. The EQ isn't the greatest for microdosing without mods even with elbow packing. ddave has some pretty good options for microdosing though.
When we travelled we used one of these. Held the solo, some stems, grinder, and some stash. No smell escaped, and it locks (you can pick the code. We use the police code for fire).
I normally give it 10-15min. I get some pretty rippin' hits off it with the 18mm female/18mm female adapter I picked up yesterday after waiting that long.
Just an fyi, you can get a smart IR blaster that will let you turn the EQ on, change temps and fan speed, etc. remotely. I'm hoping to tie it into the rest of my smart home and get some really fun stuff going.
The end of a camelpak drinking hose : https://www.amazon.ca/Camelbak-90011-Bite-Valve-Blue/dp/B0019DCVTA?th=1&psc=1&source=googleshopping&locale=en-CA&tag=googcana-20&ref=pd_sl_7qy0yawwls_e They say it works pretty well.
Here is the one I use, works well and can be plugged into any USB port/outlet.
High Speed USB 2.0 A Male to DC 4.0mm x 1.7mm Power Cable 3Ft https://www.amazon.ca/dp/B00NQCMRJ6/ref=cm_sw_r_cp_api_mViuzb0XPZN0N
awesome! I ordered this http://www.amazon.ca/dp/B0012LOQUQ but now I'm second guessing if I should have gone to a vape shop or go back to Friendly Stranger :S
guess ill test it out when it arrives :s I know a normal kitchen scale couldn't even detect the flower :(
These are perfect for dipping solo stems into http://www.amazon.com/JG-Finneran-9-121-Borosilicate-Polypropylene/dp/B00E35M420/ref=sr_1_2?ie=UTF8&qid=1461388259&sr=8-2&keywords=scintillation+vials
Dont know if they will fit your case, but they are 55mm tall by 22mm diameter
*Edit: you can even suck air through the other side of your stem to fill the bowl while it is dipped in the vial
I highly recommend getting Grunge Off. It's safe and reusable. I have been using the same 16oz bottle for months now. I leave all my stem soaking in the liquid for about 2 hours and they come out spotless. You can also get a bottle for only $16 now!
check out these out from USA, amazon :
I got this, but honestly, I rarely remove the f/f adapter because I elbow pack. And even when I do need to remove it, I didnt find the top rim to be too hot to pick up.
Thinking of maybe this plus this
I bought a bite valve. It worked perfectly, no longer have eq unfortunately.
No problem. These are them. http://www.amazon.com/White-Silicone-Rubber-Tubing-Grade/dp/B003TJ9YQU. The tube really doesn't get hot at all so it's not much to worry about. They are food grade. I get 5/16 inner diameter and 1/2 outer. I was a little off about the price though. It's about $2/ft
I use a long hose all the time for bags, I don't remember where the original short hose even went.
The only detriment to using a longer hose is you'll get a little more reclaim in the hose as the vapor cools on it's way to the bag. It's not something you're necessarily going to even notice day-to-day.
I will say, do yourself a favor and get some new silicone tubing (the correct size is 5/16" ID, 7/16" OD): http://www.amazon.com/gp/product/B000FMWTSY/
It's much, much easier to clean (you can use alcohol and other solvents), and way more flexible than the standard PVC hoses.