Here they are on Amazon Qibaok Crimping Tool Kit Ratcheting Crimper with 1550PCS 2.54mm Dupont Connectors and 760pcs 2.54mm JST-XH Connectors for AWG 26-20(0.1-0.5mm²) https://www.amazon.com/dp/B07ZK5F8HP/ref=cm_sw_r_cp_api_glt_fabc_F5QYZXT75V0PWWX5Q155
Since the board is bigger than the silhouette mat. Could I tack two chip boards together to make a makeshift mat? Using something like this https://www.amazon.com/Krylon-K07020007-10-25-Ounce-Repositionable-Adhesive/dp/B000A8AYO4/ref=mp_s_a_1_3?dchild=1&keywords=spray+tack+adhesive&qid=1608516951&sr=8-3
The linked adapter is not the chip type specified. I found this one and ordered will report back on Sunday when it arrives. Unfortunately, doesn't sound like 5.0 will be an option but hope to get decent 4.0 functionality ($20 dollars later on multiple purchases:-))
Even Amazon mats have a clear sheet overtop. Once you remove it, keep it so you can put it back on. It’ll keep your mat from collecting lint/dust/hair et ..
These are the mats I use. You’ll see the pic shows a clear cover to peel off.
Legendary post. The URL for the replacement o-rings doesn't work anymore, but I found them with your search terms, and I think they're the same thing you got:
https://www.amazon.com/gp/product/B07MD7TDRC/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Thanks for saving my bacon! :)
Absolutely! Here it is: https://www.amazon.com/gp/product/B08H1SL9VX/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Thermal matte from Oregon Lamination. I get two sticker sheets per pouch.
https://www.amazon.com/dp/B0141NU808?psc=1&ref=ppx_yo2_dt_b_product_details.
And to note in the follow-up to the other comment, some printers don't do well on glossy. The smaller standard ecotanks will replace black with cyan and other colors to approximate black. I get a nice smooth finish using onlinelabels matte vinyl for inkjet.
While my stickers will only do 4-6 months outside on a car before fading, they're tough as nails and do really well on my drink cups - even after months and months of being there.
https://www.amazon.com/Craftables-Orange-Flocked-Craft-Vinyl/dp/B079NPVGG6/ref=sr_1_1_sspa?crid=E37VOO2VLQ5I&keywords=Rhinestone+flock&qid=1645113181&sprefix=rhinestone+flock%2Caps%2C108&sr=8-1-spons&psc=1&smid=AY6AHC5QX4SB.... I use the flock from Amazon 👆🏽url.
I cut my template, then since it does not have a sticky back I press it to some vinyl the stick it to $ store plastic cutting board. It’s cheaper then most flock I’ve found. I’ve heard that you can also use glitter card stock to cut templates. I’m gonna try it and post results later.
can you not try adjusting the depth using the wheel on the top with numbers 1 to 11?
I use different blade holder where I can adjust depth only by feel, but it works perfectly.
https://www.amazon.com/gp/product/B07LBN6Y89/ref=ox\_sc\_act\_title\_13?smid=A5BTY9V5KZZY1&psc=1
Its called easyliner! https://www.amazon.com/Duck-1115016-Laminate-Adhesive-18-Inch/dp/B002AS9NBW
I found it like 5 years ago and I am just now getting a new one and I made a LOT of stuff! You can get 18x24 feet of it for like 6 bucks.
Here is a rundown of all the options:
https://www.thecountrychiccottage.net/transfer-tape-alternatives/
I just ordered a pink one off Amazon.ca this morning. It'll be here next week.
​
I use Zicoto Premium Printable Vinyl Sticker Paper that I purchased on Amazon. https://www.amazon.com/gp/product/B07NX8M1LP/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
And then I spray them with a UV resistant spray to make them water-resistant. I have also read great things about Online Labels sticker paper but have not tried them yet.
Hmm, I did have a lot of trouble with the Silhouette transfer tape generally. I’ve tried a lot of brands but this one is my favorite. Craftopia Clear Vinyl Transfer Tape with Grid for Adhesive Vinyl Medium Tack | 12 Inch x 8 Foot Vynil Transfer Paper Roll | Compatible with Oracal 651 Vinyl, Cricut Vinyl and Cricket Maker Machine https://www.amazon.com/dp/B07LC32QNR/ref=cm_sw_r_cp_api_i_g7y8Db5H7SA67