What are
/r/GalaxysEdge's
favorite Products & Services?
From 3.5 billion Reddit comments
The most popular Products mentioned in /r/GalaxysEdge:
The most popular Services mentioned in /r/GalaxysEdge:
Scratch
Gofile.io
Fast.com
Anki
TikTok
ComiXology
The most popular Android Apps mentioned in /r/GalaxysEdge:
Discord - Chat for Gamers
Beacon Scanner
The most popular VPNs mentioned in /r/GalaxysEdge:
The most popular reviews in /r/GalaxysEdge:
The statues have poem lines from the "Collected Poems, Prayers, and Meditations on The Force." Excerpts of the writings from this work are shown in the canon book "Guardians of the Whills."
If they represent specific people, they're gonna be ancient figures we don't know yet.
I bought a backpack cover for my Droid bag, to make sure it stays dry. If I'm not carrying the Droid, I'll use a waterproof bag for phone, keys and wallet.
Depending on the temperature, I may just get wet, or carry a poncho and umbrella. I bought beige Frogg Togg ponchos and used bright green, dark green, and brown spray fabric paint to make a camo design, so they look like Endor ponchos, and the ones the CMs wear.
Whatever you have, you want it available quickly. People will flock to any sort of cover, and it gets incredibly crowded with no sense of distancing whatsoever. Rides do not close for rain, but anything with an outdoor portion will close if there is lightning in the area.
When we flew with sabers for conventions prior to GE opening, we used a hard, expandable blueprint case with scrap EVA foam for padding.
This is the shirt I am using as my base: NITAGUT Men Henley Neck Long... https://www.amazon.com/dp/B01LB8GZGM?ref=ppx_pop_mob_ap_share
And then I and wearing this light shawl-like vest over it: COOFANDY Men's Ruffle Shawl... https://www.amazon.com/dp/B07P99G7VT?ref=ppx_pop_mob_ap_share
I found one on Amazon that does a few different frequencies, but I like your idea of going to a maker space first, though I want one anyway so I can mod my amiibos, so I might just pull the trigger and buy it anyway.
​
https://www.amazon.com/gp/product/B07DS2YRLH/ref=ox_sc_act_title_1?smid=A3D27NH9LAIVPS&psc=1
Sadly no, but someone led me to these great Galaxy's Edge style bar glasses! I've used them to recreate some Cantina-style drinks!
For a Sith Lord I would look for some black moto jeans or black joggers. Whatever you think would be comfortable and affordable.
Just poked around amazon for 125khz pet readers and this popped up https://www.amazon.com/dp/B07SFXPX6P/ref=cm_sw_r_cp_apa_i_qW1eEbVWC470D
Pretty ideal, just hold the crystal inside the ring and press the button. Tempted to paint it silver and kitbash it a little bit, make it look like an actual in universe scanner
I don't have an Android phone to test any apps with, but this looks like it might do the trick. It says it has a logging feature, but I'm not sure how it logs. https://play.google.com/store/apps/details?id=com.bridou_n.beaconscanner&hl=en_US
Here are the issues on Comixology. You can use an Amazon account on it since Amazon owns it.
Issue 4 is gonna feature a prominent character from the comics! It might be worth getting a Marvel Unlimited account (which features all comics around 6 months or older) to get into her appearances in the Darth Vader comics and her solo series.
It's a low profile industrial style, so something like this.
You always want sew in style, not sticky. Sticky is garbage.
I use these to protect against folks accidentally ingesting dry ice: Icicle 10-Pack Drink Stirrer Swizzle Sticks for Smokey Drinks (Use with Dry Ice) https://www.amazon.com/dp/B01LW1O3HA/ref=cm_sw_r_cp_apip_BeNERLMHBnDqY
I had the same problem, with the same parts! It does look cross threaded, but I was told to use beveled plumbing o-rings link here. Worked like a charm for me, also kept the parts aligned in the way I like Edit: for spelling
Try these.
Someone recommended this to me when I was searching for mounts for my lightsaber. Holds up really well. Been on my wall for 5 years now.
Yes! I use Simply Watermelon, it’s not too thickly colored and it’s got a good flavor, but since it’s thinner the consistency will be closer to a slushee than a smoothie.
As for dragon fruit, I ordered this one.
The box came from Amazon: https://smile.amazon.com/MyGift-Vintage-Brown-Leatherette-Straps/dp/B07VF8YM8D/ref=cm_cr_arp_d_product_top?ie=UTF8
currently out of stock though, I think Christmas cleared them out. They got a few in stock at the first of January and I ordered then.
The internals are just some stuff I happened to have on hand from past cosplay work, leftover foam from padding helmets and some rabbit fur I used on a decommissioned costume repurposed to cover the foam, though I may replace that with some red velvet since it is a power and control saber. I think a elemental nature saber would look very nice in this set up though so might have to get another box when they come in. I have enough foam to make a 2nd one for when I make another saber one day.
I made them. I’ve had a big piece of yellow leather around for years. I planned to reupholster a chair but never got around to it. I bought the thick brown leather at a recent country fair for $30. I still have a bunch left. There are leather knife and rolling cutters but I found a carpet knife from Home Depot best as long as you have a stencil or metal straight edge. I bought the D-rings at either Home Depot or Joanne Fabric. The hooks, toggle are from Joanne. The leather pouches were $6 each at an army-navy store. The tan water bottle holder was on Amazon, as was the riveting kit. You can get that here for $20:
Leather Rivets with Punching... https://www.amazon.com/dp/B07SCJ17LX?ref=ppx_pop_mob_ap_share
I recommend a hole punch pike rather than the squeeze hole punch it comes with for leather. And you need a hammer and a block of wood to go under the rivet plate. The imperial code keys, battery, comm and the one silver buckle are all 3D printed.
The one I bought on Amazon was like $70 I think? Not terrible... let me see if I can find it:
Oh, wow, $56 now. https://www.amazon.com/dp/B07DS2YRLH
The only trick to it I found was orienting the crystal to it correctly. Some facets work better than others.
So if you scan it, and can't read it, rotate it and try a different facet.
On second thought, I think I'll just buy this charger that can handle both just in case.
​
I bought a different one that came without padding so I just grabbed this 2-blade holder. It arrives tomorrow, 10 days before I land at Batuu: https://www.amazon.com/gp/product/B0897K5H83?ref=ppx\_pt2\_dt\_b\_prod\_image
If you want a case that holds two blades try this one
https://www.amazon.com/YDDSABER-Lightsaber-Carrying-Waterproof-Adjustable/dp/B0897K5H83/ref=
I got it and it fits both my 31", and 36" blades
>Blade Builder
Ah.. Something like this.
https://www.amazon.com/Star-Wars-BladeBuilders-Spin-Action-Lightsaber/dp/B01DREMSWI
Yeah.. I remember that we have to spin in Manual.
Someone gutted and shoved theirs into a Force Band. Personally I like the novelty and play with my force band still so I'm not into the idea of gutting it; however, it is an idea to use. Everyone definitely comments on it when I was in Batuu.
https://www.amazon.com/Sphero-AFB01USA-Star-Wars-Force/dp/B01KX211JI
I saw these. For $50 and only holds one, I don't know. I bought an actual sword bag Shoulder straps, no pockets, but looks like it fits 2 blades. Also, $20.
https://www.amazon.com/dp/B07SSBSS7H?psc=1&ref=ppx\_yo2ov\_dt\_b\_product\_details
This is what comes up when I search for it in my order history https://www.amazon.com/dp/B08RXDMR8L?_encoding=UTF8&psc=1&ref_=cm_sw_r_ud_dp_3VPERB59ZD5GMJDD7GAF . It’s not giving me the option to share it and if I search for it on Amazon it doesn’t come up at all.
Here’s a link to a screenshot of the page if that helps.
I’m sorry, I can’t seem to find them anywhere on Amazon at the moment.
They actually use command strips instead of screws. I needed them since the wall is cinderblock in my basement and I wasn't looking to drill into that. I was worried about the weight of the sabers, especially Cal's. But no problems at all with them falling.
I've had a lot of poor results on aliexpress orders that *should* work. After a long time of back and forth, we finally found a reliable supplier through Alibaba direct. If it does eventually work with the spoon, I'd recommend printing a spacer that puts it a bit higher up into the focal range.
Alternatively, this works exceptionally well if you can catch it in stock. Unless you're doing other RFID work, the hand tool works perfectly.
Use vpn on your phone or pc (I use ProtonVPN @ $10/mth), select Canada as your connection location, search “shopdisney uk”. Once you are on the site you can try to order it and see if it will accept your US shipping address. I just tried it and I can see the Luke and Darth sabers listed but I did not try to order one.
My Lightsaber came from Planet Group USA:
https://www.amazon.com/gp/product/B07ZHP7S1R/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
It was packaged well and even came in a Disney World Bag.
Found them here
ONIVA - a Picnic Time Brand - Star Wars Chewbacca - Bottle Cooler, Brown https://www.amazon.com/dp/B09JWYBVX6/ref=cm_sw_r_cp_api_i_XR5T1QS5ZHS368ZH0AFV?_encoding=UTF8&psc=1
Just know that it’s just the cover not the actual canteen itself
It actually comes in today
I use Led Strips and Led puck lights from Amazon Amazon led puck lights
COOFANDY Men's Muscle T-Shirt Pleated Raglan Sleeve Bodybuilding Gym Tee Short Sleeve Fashion Workout Shirts Hipster Shirt https://www.amazon.com/dp/B07WH2QFMF/ref=cm_sw_r_apan_i_Q2EC0F1M9WC83EX84ETX
Literally the third entry when I searched male ribbed sleeve shirt.
Yes, I use NordVPN on my computer and phone. Turn on the VPN and select United-States before opening the Disney World app or going onto the desktop websites. Make sure you're logged into your MDE account too
Amazon sells motorcycle helmet wall mounts for about 15 bucks. That's what I used. motorcycle helmet mountsmy display
Sure do! Btw I noticed a good keyword to find interesting Star Wars style clothing/accessories is "motorcycle". Jackets, pants, and bags are all very Star Wars.
At this point, an LGT base-lit from Amazon is your best bet. That said, you could wait, and buy a saber to commemorate your evening at Batuu.
https://www.amazon.com/Heavy-Dueling-Infinite-Changing-Adjustable/dp/B08RB51JMN?th=1&psc=1
I have this exact hilt, times 2, in a Proffie Neopixel saber. I LOVE it. You can get this one, and then upgrade it if you wanted to.
Amazon!! Cynemo Motorcycle Goggles Vintage Pilot Riding Goggles Leather for Men Women https://www.amazon.ca/dp/B08TMMY1LB/ref=cm_sw_r_apan_i_QK690DFJCHPRQD2ZPP71
The ones I have are darker though!
OMG! You have saved my life!!! Thank you so much for the tip! Was pulling my hair out this morning in the UK. No options were appearing at all for the booking. Into NordVPN. Select USA. Logged back into my disney experience and the option to book appeared. I hope this helps someone else struggling to book savis from the UK. Can't thank you enough! :)
> Real light Henley shirt
You also might want to perhaps look at ghillie shirts, too. That pirate/scotsman looks pretty Star Wars-y: https://www.amazon.com/PAUL-JONES-Lightweight-Scottish-Jacobite/dp/B076MVQ3LV/ref=asc_df_B076MVQ3LV/
> Not sure what pants yet.
For my fighter jock pilot outfit, I'm probably going to go with these guys (in Rebel Orange, to boot!) https://www.amazon.com/CQR-Tactical-Repellent-Ripstop-Lightweight/dp/B08V947K1Q
I feel like this would really help with the look and possibly help replace your belt since they won't let it in.
Jack&Chris Genuine Leather Drop Leg Bag for Men and Women Handmade Fanny Pack Multi-Purpose Outdoor Hip Bag Waist Pack JC07-8,Brown https://www.amazon.com/dp/B09NVKSJ6K/ref=cm_sw_r_apan_i_B6ECKZWZD4RGNEFFHBCM
This also has potential as a Firefly cosplay with a few minor changes. I always appreciate a multi purpose bound/cosplay.
I know this may sound a bit funky but you could potentially replace the bullets in your belt with nerf gun ammo if you are dead set on keeping the belt.
All in all well done! I genuinely thought this was r/disneybounding at first.
it came from target actually. looks like you can get it on Amazon
Star Wars: Galaxy's Edge: The Official Black Spire Outpost Cookbook https://www.amazon.com/dp/1683837983/ref=cm_sw_r_apan_i_QFSC99FE13KF50359ZMW
I think I remember someone bound with a leg bag. Kinda like a Fanny pack but attaches to your leg….
Something like this
Le'aokuu Mens Genuine Leather Motorcycle Waist Pack Messenger Shoulder Drop Leg Bag
https://www.amazon.com/dp/B01ITB8V52/ref=cm_sw_r_cp_api_i_79F9Z4Z23MN8ZMCJRW3N
My recent purchase for our trip in a couple of weeks. Ended up deciding not to do any bounding, but I’ve still decorated it with some SWGE patches, so I’m still carrying it on our DHS day.
Mygreen Canvas Cross Body Messenger Bag Shoulder Sling Backpack Travel Rucksack https://www.amazon.com/dp/B01M7VWNBY/ref=cm_sw_r_cp_api_i_Z58Q1XAWD2TK70P0ZEXA?_encoding=UTF8&psc=1
disney uses very poor quality batteries that tend to die rather quickly. the ones in the droid / remote might have been sitting around for months or even over a year before you built your droid.
rule of thumb for any lightsaber / droid issue: always change the batteries first and see if that fixes the issue.
if the new batteries in both the remote and droid didn't fix the issue, try using the mobile app to control it:
iOS version
Android version
if it's STILL having movement issues after doing both of those things, you'll have narrowed it down to an issue with the droid body. if it had issues with the remote but not the app, you'll have narrowed it down to the remote being at fault.
as you mentioned, it might be a bad leg as well. check out the wheels on the bottom of the left and right legs (not center) to see if anything -- small rock, gum, etc -- might be stuck in the gap between the wheels and their leg holes. if he's veering right, it could be something wrong with the right leg (left is giving its power causing it to turn right). do this if the batteries and remote/app testing failed.
if it's within 30 days of purchase and still having issues after you switch the batteries, contact their customer service and let them know which item has the issue (body or remote) and work with them for a replacement.
We grabbed these from Amazon they work pretty good and look nice on the wall…
LEKUSHA Lightsaber Wall Mount Display Stand Light Saber Holder Compatible for Any Lightsaber, Black Pack of 2 https://www.amazon.com/dp/B095LYW631/ref=cm_sw_r_cp_api_glt_i_WWFTYW038BRR17NFXBK1?psc=1
The one on my bf’s chest is https://www.amazon.com/dp/B012ZYCDR6/ref=cm_sw_r_cp_api_glt_i_2KA6WY7V3ZYCZ0QVKNTF?_encoding=UTF8&psc=1
Posted the link in a separate comment below for the one on my bf’s chest. My leg bag is from Amazon, but if you’ve got time (like 45 days), there’s a knockoff on AliExpress for at least half the price. Hip Bag
I got these from Amazon they work pretty good!!!
LEKUSHA Lightsaber Wall Mount Display Stand Light Saber Holder Compatible for Any Lightsaber, Black Pack of 3 https://www.amazon.com/dp/B095LYSHD8/ref=cm_sw_r_awdo_WBZ057WRTFE76RHWVA84
Got’em from Amazon…They work perfectly!!!…
LEKUSHA Lightsaber Wall Mount Display Stand Light Saber Holder Compatible for Any Lightsaber, Black Pack of 3 https://www.amazon.com/dp/B095LYSHD8/ref=cm_sw_r_cp_api_glt_i_0CW12MB9H47PD95GVXM9?_encoding=UTF8&psc=1
Thanks! Amazon: COOFANDY Men's Ruffle Shawl Collar Cardigan Sleeveless Open Front Vest Lightweight Cotton Long Length Drape Cape https://www.amazon.ca/dp/B093GPW4QL/ref=cm_sw_r_cp_api_glt_i_WQZGTE1SG7RW1MTKQ5A6?_encoding=UTF8&psc=1
Thank you! It’s from Amazon.
COOFANDY Men's Ruffle Shawl Collar Cardigan Sleeveless Open Front Vest Lightweight Cotton Long Length Drape Cape https://www.amazon.ca/dp/B093GPW4QL/ref=cm_sw_r_cp_api_glt_i_WQZGTE1SG7RW1MTKQ5A6?_encoding=UTF8&psc=1
Got’em on Amazon…Works perfectly…
LEKUSHA Lightsaber Wall Mount Display Stand Light Saber Holder Compatible for Any Lightsaber, Black Pack of 2 https://www.amazon.com/dp/B095LYW631/ref=cm_sw_r_cp_api_glt_i_98955KPKXGZ1YX3C877W?_encoding=UTF8&psc=1
I reminded me of things the brand LSA do, like this :
LSA RU01 Rum Balloon Tumbler 380 ml Clear x 2 https://www.amazon.co.uk/dp/B07NP4KSDR/ref=cm_sw_r_cp_api_glt_i_VSP1NHTBKW02K8VA0S7R
Gonna keep looking and will shout back if I find it!
There was a Black Spire tie in novel that went into the backstoy of Black Spire Outpost. That might have the information that you are looking for.
What I have seen is people buy each "cut" then use a mold making kit like this then use 2 part epoxy resin and resin colorants for the crystal - then if you want them to work in the sabers and holocrons you can get vet rfid chips from aliexpress that you can program to have the voices and colors. If you find a mold set ready to go send me a link!
Amazon has 3-battery ac power supplies you can use, however the sound of the saber may drive you insane. If it’s a permanent fixture you could take out the speaker.
Anki is a spaced repetition flash card system. Basically it’s flash cards with some intelligence to show them to you at the optimal time. A lot of people use it for language learning.
Haven’t worn them myself but these look more in-universe than most and have good reviews on comfort
I have few of these ones. They’re cheap and easy to install and don’t call attention away from the sabers. I love them!
YYST Clear Light saber Wall Mount Wall Rack Wall Holder - Hardware Included. https://smile.amazon.com/dp/B07F58LXFP/ref=cm_sw_r_cp_api_glt_fabc_J76TZ1QJP6Z0TP7ZB0K1
i agree with this!
pre-lockdown, i managed three days at Hollywood Studios in Jan 2020 and three days again each trip at Disneyland in Feb 2020 and March 2020 (just before the closure). i had some methods that worked every time for me where i'd get in the first 15 or so boarding groups (highest i had was group 38), but it was likely because i was trying to get in as one person rather than as a group, so i likely had better luck while it was trying to fill out those single slots. others who were standing right next to me in the park and trying at the exactly same time sometimes would get in a group 100+ or in two instances, a 4-person group of people near me didn't get a group at all and they were trying at the exact same time. all you can do is try and hope for the best.
something you can try that may help... have a very strong internet connection, preferably a strong wifi connection, when you attempt it. use fast.com to check your speed, especially in a hotel, and find an ideal place to stand when attempting. for instance, my 5G phone only gets LTE service at 12mbps inside my house, while my wifi gives me around 90mbps or better, depending on where in the house i stand in relation to my router.
nicely done! i love the look of the communicator and the greebles.
you said in the other reply that you used adhesive for the 3D prints? which type of adhesive?
having done 3D prints for cosplay outfits, the one thing i always worry about is how to wash the clothing item without ruining the print. something you can try for next time (or if these fall off or need to be removed when washing) is to glue some upholstery tacks to the back of the print -- it's best to use E-6000 adhesive for that! -- and then use a squishy pin back like the ones from Disney pins to hold it in place. it also helps to hot-glue the pin backs onto the upholstry tacks to help keep them from popping off (and the hot glue is easy to peel off when having to remove the pin backs before washing). the tacks will leave holes in the fabric, but that's useful for finding where you had placed the pieces before taking them off. :D
it's a candied hibiscus you can buy from specific places. Amazon happens to have something similar to the ones used by the park (as far as i can tell, they are pretty close although i haven't received my order yet). i think places like Whole Foods and markets that cater in such things would have them as well, but i haven't looked into it very closely yet for other options.
i made the mistake of forgetting to eat mine in the first one i ordered. it sunk to the bottom and was buried by so much ice that it slipped my mind by the time i ordered another cocktail and the server took the glass. i'm still kicking myself over that... lol
all batteries have the potential to leak. the best way to prevent them from leaking is to remove them from any device that you're not going to use for a while (a few weeks or more). lithium batteries should have a lower chance of leakage than alkaline batteries.
from a cost perspective, cheap alkaline batteries are the way to go. they perform nearly identically to name brand and will cost significantly less.
lithium batteries will last longer, but are more expensive. if you don't like having to change batteries often and are willing to pay extra for that then these are the way to go.
a third option i've been using for a while now, and i prefer, are rechargeable lithium batteries such as these. they're a different type of lithium battery (lithium ion, whereas the disposable lithium batteries are lithium iron disulfide). they're like the battery in your phone. the internal lithium ion battery puts out about 3.7 volts and circuitry inside the battery regulates that down to 1.5 volts. the end result is from fully charged to fully drained, these batteries will ALWAYS produce 1.5 volts. your blade won't start changing colors as the battery drains, like alkaline or lithium (iron disulfide) batteries will. when the battery needs recharging your blade will simply stop working. the drawback of these batteries is they will self-discharge much more quickly than alkaline batteries. if left alone, fully charged, after a few weeks they'll need to be charged again. and they won't last as long as alkaline or lithium iron disulfide batteries, so you'll be removing batteries more often. but i don't mind that when i know i'm going to always have a steady voltage powering the lightsaber and the blade won't start to behave oddly because the batteries need to be replaced (others may feel that to be a 'feature', which is cool).
The resin can be purchased [here] and the molds can be purhcased [here]. I was able to make 12 coasters with the amount of resin that was in the set. (https://www.amazon.com/gp/product/B08KXZ9BS3/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1) (https://www.amazon.com/gp/product/B07TVWTG82/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1)
Almost all computers on this days have Bluetooth, but if that the case yours doesn’t have it, you always can buy it a Bluetooth Dongle like this one for example
https://www.amazon.com/dp/B07V1SZCY6/ref=cm_sw_r_cp_api_glt_fabc_01F5F34AQ4E1F8CN584W
As a teacher, I use a clear mask so students can see my mouth. They really appreciate it, it helps ELL and hearing loss students, plus it makes me look like Saw Guerra.
Set of 2 Clear Face Mask... https://www.amazon.com/dp/B08PSKWT96?ref=ppx_pop_mob_ap_share
Amazon! https://www.amazon.com/dp/B07BZF3HP1/ref=cm_sw_r_cp_api_glt_fabc_Q3RMYZ61GYT4B7PGB7V8?_encoding=UTF8&psc=1 (Definitely be sure to wash it, I hand washed/soaked it and a lot of excess dye came out 🥴)
There are none that I'm aware of at the moment. It would likely require a redesign of the battery pack and some new electronics.
I'd like to suggest an alternative solution: USB rechargeable AAA batteries
There are a number of them available on ebay, amazon, and elsewhere. They're basically little lipo batteries stuffed into a AAA-sized container with charge, protection, and voltage control circuitry.
They're a bit expensive to start, but after a couple dozen recharges they become cheaper than buying new AAAs. Added bonus that they will also provide 1.5 volts until they need a recharge, which means you get the most out of the battery and you never run into those issues where certain blade colors start to change as typical alkaline batteries drop voltage as they're drained.
very nice! i've yet to try that at Oga's but sounds tasty.
when i was making the Jedi Mind Trick for my "Oga's At Home" recipe, i ended up ordering my falernum from Amazon. i wish more places carry it, but i wasn't disappointed in buying it. i've used it in making a few other (non-Oga's) tropical drink cocktails as well.
i used the pre-bottled purée. the yuzu fruit purée is a bit pricey (~$23) but you can get it on Amazon. if you do the passion fruit purée, you should be able to get some of that at most liquor stores in the mixers section. i picked up a bottle at BevMo for something like $8/bottle. you could also make your own in a blender, sure, but i wasn't able to find any fresh passion fruit in my local grocery markets, and don't even know where i'd find fresh yuzu fruit (maybe an asian market, which we do have a few here in Seattle like Uwajimaya)
FYI it's this 4-pack that includes R3X, C-3PO, R2-D2, and BB-8. I don't believe you can buy R3X on his own.
evomosa Motorcycle Goggles Vintage Pilot Style Cruiser Scooter Goggle Outdoor Sand Goggles Bike Racer Cruiser Touring Eyewear for Half Helmet https://www.amazon.com/dp/B06Y31DDP3/ref=cm_sw_r_cp_api_glt_fabc_BR2MTXBZ2TJHHVZK7GRF
https://www.instagram.com/p/CHggBCYHLZC/?utm_medium=copy_link
The resistors I used were
Cutequeen 1/4W 1% Metal Film Resistor Kit RoHS Compliant 25pcs/Values (134 Values) https://www.amazon.com/dp/B017L9GKGK/ref=cm_sw_r_cp_api_glt_fabc_M6MF4CZVMD82DAWT3N4T?_encoding=UTF8&psc=1
I found that anything above 20 ohm only dimmed the blade. I think this one sits at like 6? The Instagram linked in my IG post is a guys who has some vids on YouTube of how to modify the blades board.
There are things like this, but it would still turn off after the 5 min inactive timer. Not too sure how you could thread the cable out either. Would need to do some drilling me thinks.
Lenink AC Power Supply Adapter for AAA Battery,Replace 3 AAA Battery,Black https://smile.amazon.com/dp/B0874HWL2L/ref=cm_sw_r_cp_api_glt_fabc_3TS7Q5SEXPE42RM05JF1?_encoding=UTF8&psc=1
Had to order from Amazon UK! https://www.amazon.co.uk/gp/product/B008Z4EGXK/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Monin 1 Liter Yuzu Fruit Puree https://smile.amazon.com/dp/B01IFVFGZO/ref=cm_sw_r_cp_api_glt_fabc_HSJAV2N0QTVWN176YEJW?_encoding=UTF8&psc=1
And my ratios:
2oz Bacardi Silver 2oz Pomegranate Juice 1oz White Cranberry Juice 1oz Yuzu Purée A Dash of Silver food grade glitter dust
Shake on ice and strain
Looking for Bespin Fizz? I used this recipe and it turned out great:
https://www.youtube.com/watch?v=VKboM2sts9U
Since I doubt you have the fancy dry ice contraption, I simply bought a pound from my local ice cream shop. Then, break up dry ice (simply slam the bag on the garage floor) into smaller chunks so chunks can fit into dry ice holders (so people don’t accidentally ingest dry ice). Containers to safely hold dry ice in the cups:
https://www.amazon.com/gp/product/B01LW1O3HA/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Be sure to use those safety containers for the dry ice. Ingesting dry ice is…not good.
His guide harness has have D rings for a vest.
I was looking at this one for him: Service Dog Harness, Large Dog Harness Removable Neck Strap Compatible with Assistance Harness & Handle (Black, Short Version) https://www.amazon.com/dp/B07X3LQ8ZW/ref=cm_sw_r_cp_api_glt_fabc_DMT7JTYY1FWBA3G66TGH
Will have to think on some different clothes options for myself.
From what I can tell from the description of the PRIJOUHE Men's Kimono Jackets Cardigan Lightweight Casual Cotton Blends Linen Seven Sleeves Open Front Coat Outwear https://www.amazon.com/dp/B07TTMBHZT/ref=cm_sw_r_cp_api_glt_fabc_7QDHF5WD20EX3KCVNRKX?_encoding=UTF8&psc=1
its more of a jacket type thing. I'll have to ask my husband to describe it more.
I can take it or leave it on the cloak, it was just a option.
I’ve seen many people use these Command Hooks that are made for brooms
If you don't intend to wear both sabers at once, there's no reason to buy two. Any Covertec belt clip works for those with the clip, and a simple hook clip works for those with d-rings. The benefit of the Disney clip is that it handles both.
If you're already spending $400 on sabers, do you really want to risk that over not dropping another $20 on a secure belt clip? GE sabers are heavy, I would not trust 3d printed clips to secure them.
Just some simple nailed in wall hangers On occasion I had to use some wire to wrap around the hilt but I made sure it was well hidden
It's really good and works well with the overall theme and came in fast too!
got it right here:
Got them from amazon
Jusalpha 12 Inch Contemporary Clear Acrylic Floating Shelves -Wall Mounted Display Organizer, Set of 2 (12 Inches) https://www.amazon.com/dp/B01MU2SV7G/ref=cm_sw_r_cp_api_i_6b8NDbZRAHF93
No, they are from Amazon! (I'm sorry, I'm a mobile user who doesn't know how to link things)
Yes. It’s a Anakin/Luke/Rey legacy saber from Batuu.
I packed the blade in a plastic fishing pole case from Amazon (Plano Airliner Telescoping Rod Case https://www.amazon.com/dp/B000E39U40/ref=cm_sw_r_cp_api_i_iTX.Db6FVTHK5)
Checked it as luggage for the plane ride. Worked great!
Yes. It’s a Anakin/Luke/Rey legacy saber from Batuu.
I packed the blade in a plastic fishing pole case from Amazon (Plano Airliner Telescoping Rod Case https://www.amazon.com/dp/B000E39U40/ref=cm_sw_r_cp_api_i_iTX.Db6FVTHK5)
Checked it as luggage for the plane ride. Worked great!
We flew with sabers last year for Celebration, prior to GE opening. We put the hilts in my carry on, in a big plastic case for protection. And used a hard blueprint case for the blades, because my boyfriend's 38" didn't fit in any of our suitcases. Use EVA foam scraps at the top and bottom for protection.
This is the one I bought and it works well:
https://www.amazon.com/dp/B07DS2YRLH/ref=cm_sw_r_cp_apap_hQ6fekUS4uuSF
But I found positioning the crystal can be tricky to get a good read/write. You have to turn the crystal and find the facet closest to the chip. Once it reads, you know you have the right one and can write it.
I got a bag from this Amazon listing and I love it even more than I thought it would. They have a lot of different styles and colors so something might work for you.
Definitely. It was my first time wearing it and it fit awesome. I’ll add the link to it and to the shirt which I got on Amazon. I’d highly recommend both
Vest: https://www.toddscostumes.com/costumes/han-solo-costume/han-solo-vest/
Shirt: https://www.amazon.com/dp/B0714DM16K/ref=cm_sw_r_cp_api_i_d6cuEbCE8C2R3
East’s selection is pretty impressive. Try eBay, Amazon and maybe just a google search.
This my preferred sables display...
YYST Clear Light Saber Wall Mount Wall Rack Wall Holder - Hardware Included. https://www.amazon.com/dp/B07F58LXFP/ref=cm_sw_r_cp_api_i_9etrEbX62DAXD
Nothing fancy.
On Amazon here, but it looks like they only have ring sizes 10 & 11 left.
Yes, you can purchase an RFID reader/writer off Amazon and open up all the colors and voices for the holocrons.
I was just told to get regular super glue, so I got this off Amazon, and it worked perfectly. I also got a super glue accelerator for smaller parts but didn't end up needed it.
But for the model pieces glued to model pieces I used plastic cement as CYA glue can cause annoying clouding on the surrounding pieces.