What are
/r/Integra's
favorite Products & Services?
From 3.5 billion Reddit comments
The most popular Products mentioned in /r/Integra:
The most popular Services mentioned in /r/Integra:
The most popular Android Apps mentioned in /r/Integra:
The most popular reviews in /r/Integra:
Yea these are aftermarket halos. Much better than the fogged out, yellowed out originals.
The ones I got are these. https://www.amazon.com/dp/B004W4O704/ref=cm_sw_r_cp_apap_pu6Mxy9KuGgSt
Plug and play and have worked great...knock on wood. Been almost 2 years now.
I would recommend you to get yourself one of these as it makes the job less of a pain to get right.
Kitchasy LEDs on Amazon.
Got these for the two map lights and one dome light in my 98 LS:
DE3022 DE3175 LED Festoon Bulbs,... https://www.amazon.com/dp/B081MS7K56?ref=ppx_pop_mob_ap_share
Got these for the license plate lights:
Kitchasy Led 194 168 Bulb, 175 2825 158 W5W 2825 T10 Wedge, 6000K White Upgrade 5 SMD 5050 Chipset White Light for Car Interior Dome Map Courtesy License Light, Parking Side Marker Lights,10pcs White https://www.amazon.com/dp/B07K1XS2BT/ref=cm_sw_r_cp_api_glt_fabc_C20YKGMCKCY63K33DYEW
Use the leftover LEDs for your other cars or family/friend’s cars.
Maybe I should post pics here. Hmmm.
https://www.amazon.com/gp/product/B074M6P6BK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 these are the ones I'm running on mine.
I've got the print live now here on Amazon.com if you're interested. If you're interested in purchasing and are able to leave a review let me know and I can hook you up with a discount.
Try Reddit Sync
This app makes it really easy to insert links and pictures in your posts. It has so many great features.
the advice to "add trans fluid" is straight up wrong. There are cars that specify to use ATF for the PS hydraulic system. Honda is not one of them.
Guess I should have been more clear by saying to use Honda-SPECIFIC PS fluid. Doesn't have to be Honda/Acura branded. Other companies make Honda-specific fluid. Although, last time I went looking for Honda fluid at the parts store, I wasn't really clear which version would be the best to use. Some said to use only before a certain model year, some said good for any Honda, some said good for any Aisian vehicles including Honda. So I just decided to buy 3 bottles of OEM Honda fluid off Amazon to avoid any confusion or possible issues down the road. It's only 20 bucks for 3 bottles.
Picked up this set about a year ago and have used it a bunch on my cars, especially the #2 driver. The handle looks and feels like a shift knob lol. Vessel 220W
If you want to get the bumper/fender interface nice and flush, I recommend these replacement Rexka clips. Much easier to get than the OEM ones, and you'll have spares for when they inevitably break. They really improved my front bumper fitment. https://www.amazon.com/Rexka-Bumper-Clips-90661-ST7-003-Integra/dp/B07H87LD3T/ref=sr\_1\_4?crid=25NS7N4CF68Z0&keywords=integra+bumper+clips&qid=1669755986&sprefix=integra+bumper+clips%2Caps%2C93&sr=8-4
Found it on Amazon on short notice
This is what I bought
71144-SR3-A00 for the OEM version.
Or you can get a ton of them on eBay or Amazon. I've had good luck with the Rexka brand, have bought various different bulk packages of OEM replica fasteners in the past few months.
this one is only 20 bucks. I bought one of these like 5 years ago. I always remove the bolt with my impact, but then use this tool to get the bolt torqued back down to spec. https://www.amazon.com/Powerbuilt-648796-Cranks-Pulley-Removal/dp/B0000TMLWQ
Covercraft UV10554SV Silver UVS... https://www.amazon.com/dp/B000N8INNA?ref=ppx_pop_mob_ap_share
Summer is coming, so those black interiors are gonna get scorching in the sun. If anyone is looking for a good fitting sunshade, I find Covercraft products to be a great option.
These clips, 2 on each side of the bumper to fender connection. OEM ones are white plastic. Rexka 20 pcs Bumper Clips for Honda Acura 90661-ST7-003 Integra https://www.amazon.com/dp/B07H87LD3T/ref=cm_sw_r_cp_api_i_YQKH5XHZDBQS5CQNYJ1G?_encoding=UTF8&psc=1
Id use some 3M VHB double sided tape run thinly along the edges.
If you do end up using glue use very little and only in a few spots. Incase for any reason you want/need to remove it
Not sure who made the wheels years ago but there was a group buy on the various Honda forums for a 4x100 15" ITR replica wheel in silver. That's the set of wheels I've been looking for for over 10 years. Pics are in an old ad I found below.
Remove or unbolt the easy stuff so it out of the way like the battery, intake, strut bar and move other stuff out of the way like the radiator overflow, power steering reservoir and cruise control module when you get in that area. Deeper you can get in the engine bay the better it will look.
I wet the engine bay, keep it wet and use an all purpose cleaner (zep, simple green, etc.) diluted in a spray bottle then agitate with a soft brush. I stay away from any strong degreasers or anything like that. A leaf blower helps dry the bay and finish with a microfiber. Use your favorite protectant on the rubber and plastic. I'll usually go over the paint with a quick detailer once I'm done.
I cover the alternator and distributor with a plastic bag. I just use a garden hose with a nozzle and use a shower setting. Just use some common sense
https://www.amazon.com/VIKING-Multi-Purpose-Synthetic-Interior-Detailing/dp/B0846M144Q?th=1
I got something like this.
FLKQC Car Lock Stainless Steel Clutch Lock Accelerator Lock Anti-theft Device with 3 Keys https://www.amazon.ca/dp/B07Y3YK6RM/ref=cm_sw_r_cp_apan_glt_i_RBVAB2BPHM59F0VF63YF?_encoding=UTF8&psc=1
I found this one for pretty cheap and it has mostly good reviews.
It could be just the cap and rotor that you need to replace but I recommend just switching out the whole distributor since your car is old. It was weird when my distributor went out. I don't drive my Teg that much but I drove it to work one day and I switched out the spark plugs one week later and after I replaced the plugs, my car wouldn't start.
Distributors have to spin at high RPMs so after a while, the thing just wears out.
Rexka 20 pcs Bumper Clips for Honda Acura 90661-ST7-003 Integra https://www.amazon.com/dp/B07H87LD3T/ref=cm_sw_r_cp_api_glt_fabc_29NGP935WG41Z0SH5YX7?_encoding=UTF8&psc=1
At the very least, it looks like you’re going to need a few of these.
Couple things, mostly shots in the dark...
Make sure you used the right bulbs for the brake lights. I forget the number but there are more than one kind of bulb that will fit into the same sockets and using the wrong one can cause weird behavior. I have seen the wrong bulbs keep the brake lights hard on or hard off, etc. Worth checking.
I would also do a proper repair on the plastic part that goes with the brake light switch. That switch also interfaces with the CC so your foam may not have fully addressed it. You can get them cheap on Amazon. https://www.amazon.com/gp/product/B016S1QPLC/ I would also go ahead and do the one for the clutch as well.
I swear the Integra coupe tail light design is such shit. So many things that can leak. Yeah the DMT gaskets are a better material than factory, as I have them as well. But as you can see they push the lights out slightly. Over time they will compress a bit and you may be able to pull the lights in a bit farther. You might could make a set yourself with some 1/8 inch or maybe 4mm thick closed-cell foam neoprene type material, like this: https://www.amazon.com/Insulation-Neoprene-Adhesive-Multi-Function-Soundproof/dp/B08R9LF7BX/ref=sr\_1\_42?dchild=1&keywords=Closed+Cell+Foam&qid=1633355587&sr=8-42
Maxpow 4979 Tailgate Lift Support Strut worked perfectly for me. Different style of hooking, but it works and hasn’t failed on me yet.
I ordered this kit
The little blue cone is what you need. You put big end over the axle and you slip the boot on.
Followed this video..but without removing axle from car.
If your boots have been torn for a long time it might be best to replace the axle. Those bearings will start to wear out without grease in there.
So I’ll forsure need a kit? All I have right now is the single din stereo, the harness, and crimps. Would this work?
I wouldn't buy a used one because it might be bad and you wouldn't know until you started using it.
This is the cap I bought but it looks like they don't carry them anymore.
Have you tried putting your vehicle info into the Amazon website. If you do that, it'll filter the results for parts that fit your car and I've bought quite a few parts from them and all the parts have fit. I suggest you try doing that and look for a gas cap with good reviews and buy one of those.
Also, you could try your local auto parts store. Just ask the guy at the counter and he'll look up what kind of cap you'll need and if they don't have them in the store, they'll order it and call you when the part comes in.
I had this on my old car.
​
This is similar to what I use
Mastercool 43013 Vacuum Type Cooling System Filler Kit https://www.amazon.ca/dp/B07CSKGCX9/ref=cm_sw_r_cp_api_i_l5J1Fb1MAMXVC
Local store may have them, not sure.
I use this a few times a year and that’s enough to justify the price. Makes flushing and bleeding coolant systems really easy.
Kilmat 50 mil 50 sqft Car Sound Deadening Mat. Really affordable. I have a ton left over to use on my door panels and whatever else I can think of.
I just replaced my distributor with this $60 one from Amazon:
https://www.amazon.com/gp/product/B0748D6N4W/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
As u/gizr714 said, it is super easy.
And I watched an Engineering Explained video to learn how to replace the distributor:
https://www.youtube.com/watch?v=nSwa4CMOFkY
After I replaced the distributor, I cranked the engine 3 times and it started on the 4th try.
I was going to buy that Autozone distributor in the Engineering Explained video but it's $220 at my local Autozone so I said fuck it, that distributor on Amazon is only $60 bucks so I'm going to risk it. I'm glad I did.
Amazon has cheap dress up hardware that works fantastic. Link. I can't particularly speak for longevity, as they've only been on my car for roughly a mo th, but they look great and are dirt cheap. They also don't strip and get nasty like the specific bolt you linked (God I hate those. I seriously threw mine away ages ago, just didn't have anything there for a long time)
These are what I purchased. Only 56.99.
Honestly though the best upgrade is a deck. The extra EQs and settings are like night and day on stock speakers.
I purchased this one because who the fuck uses cds anymore? Plus the automatic bluetooth sync when I put my phone in and auto start on spotify are awesome. It's so small too. It's out of stock at the moment but it was only $64.99 when I purchased it and I would do that instead of speakers first.
Amazon search pulled this up. they're more expensive than when I bought mine. There's another brand called winjet I see Amazon recommend that's cheaper but I don't know if they're good quality or not.
I've got the print live now here on Amazon.com if you're interested. If you're interested in purchasing and are able to leave a review let me know and I can hook you up with a discount.
I've got the print live now here on Amazon.com if you're interested. If you're interested in purchasing and are able to leave a review let me know and I can hook you up with a discount.
I've got the print live now here on Amazon.com if you're interested. If you're interested in purchasing and are able to leave a review let me know and I can hook you up with a discount.
I've got the print live now here on Amazon.com if you're interested. If you're interested in purchasing and are able to leave a review let me know and I can hook you up with a discount.
I've got the print live now here on Amazon.com if you're interested. If you're interested in purchasing and are able to leave a review let me know and I can hook you up with a discount.
I've got the print live now here on Amazon.com if you're interested. If you're interested in purchasing and are able to leave a review let me know and I can hook you up with a discount.
I've got the print live now here on Amazon.com if you're interested. If you're interested in purchasing and are able to leave a review let me know and I can hook you up with a discount.
I've got the print live now here on Amazon.com if you're interested. If you're interested in purchasing and are able to leave a review let me know and I can hook you up with a discount.
I've got the print live now here on Amazon.com if you're interested. If you're interested in purchasing and are able to leave a review let me know and I can hook you up with a discount.
I've got the print live now here on Amazon.com if you're interested. If you're interested in purchasing and are able to leave a review let me know and I can hook you up with a discount.
IDK about a cheap one. The Magnaflow I used was about $130. A bolt in is a little more.
MagnaFlow 22629 Direct Fit Catalytic Converter (Non CARB compliant) https://www.amazon.com/dp/B000JKLHEE/ref=cm_sw_r_cp_apa_i_ciWFDbHS841QD
If I was going to wrap the whole car, I might as well get paid for it. One of these days that company I gave all my info in 2009 who promised I'd get paid $200/month to wrap my car in an advertisement will contact me. One day.
​
I actually thought about this stuff, but then I remembered I am a klutz and would probably slice two of my fingers off trying to cut this to fit right.
This is something of a hack solution, but since I had two OEM trunk actuators break on me, I decided to attempt and find a different solution. I bought a power door lock motor, and wired it to the trunk switch. To mount the actuator, I just expanded the hole on the included railing, and secures it into place with the tail light nut/bolt. It's lasted me about a year without any problems, it was only $15, and the motor fits under the trunk panel, so unless you remove the cover, nothing seems out of place.
A new O2 sensor is a cheap and easy fix that you can knock out in a few minutes with a 17mm(?) wrench, a jack, and about 15mins. A new cat is indeed a whole other story. If you pick up one online be it OEM or 3rd party and take it to a muffler shop, it'd be quite a bit cheaper and just as good as going to the dealer.
I just did my own O2 sensor last week and my hi-flow cat is in the mail as I'm in a similar set of circumstances. Have fun.