If your looking for plastic rivets check Amazon. If you need to know the size grab a tape measure
You can try this.
I’ve used it on my jeep and it worked good. Just make sure to follow directions.
I run this in my jk, and the wife loved it enough she bought for her Camry. About a year in with no issues. iOttie Easy One Touch 5 Dashboard... https://www.amazon.com/dp/B0875RKTQF?ref=ppx_pop_mob_ap_share
I would recommend the JScan app and a Bluetooth OBD tool. I bought this one: https://www.amazon.com/dp/B06XGB4873/ref=cm_sw_r_cp_api_i_5KXMDM2X1KH5PZKVP0BW?_encoding=UTF8&psc=1
I think it was $35 for the tool and $30 for a single VIN in the app.
You can clear the TPS light, set your tire size, change your gear ratio…
I use this one :
OTC Tools 3209 Trilingual OBD II/EOBD & CAN Scan Tool with ABS/Airbag Codes and Definitions https://www.amazon.com/dp/B017TTED9I/ref=cm_sw_r_apan_glt_i_MJ8XQ63DFK7TJENB02P5?_encoding=UTF8&psc=1
The connectors are two leads tin-plated copper terminals. These are the lights below.
Nilight 2PCS 3Inch 42W LED Pods LED Cubes Upgraded Spot Flood Combo Beam Square Driving Light Backup Light Reverse Light Grill Mount Light with Wiring Harness Kit -2 leads, 2 Years Warranty https://www.amazon.com/dp/B08NK261FL/ref=cm_sw_r_cp_api_glt_i_K5F89GXGQ4APDTTVNEBF?_encoding=UTF8&psc=1
I installed seat warmer in my TJ, it's pretty straightforward if you know how to tap power, run cables and drill dashboard for the switch.
Something like this
1.5/2hrs of install.
Looks like it is a Rugged Ridge: Rugged Ridge 11549.11 Arcus Front Bumper Set, With Tray and Hooks; 07-18 Jeep Wrangler JK/JKU https://smile.amazon.com/dp/B082XWC8D8/ref=cm_sw_r_apan_glt_fabc_05M67AKJX2A2DAVK5BAD
I wish I could tell you, it came pre-installed when I adopted her. After a ton of research, I want to say it's an older model EAG or one of the X-rock crawler models. These look close, minus the brand cutouts. https://www.amazon.com/dp/B07R8V2QG8/ref=cm_sw_r_apan_glt_fabc_Q7N6YGJNGJW92RBGFPX7
The front one I got years ago off ebay. But the rear one is brand new….
I ordered this set in March of last year and haven’t had any issues. I was worried about moisture getting I raise but nothing as of now.
SUNPIE 7 inch Black LED Headlights Bulb for J eep Wrangler IP67 Waterproof Replacement Lights for 2007-2018 JK/JKU Rubicon,Sahara, Sport, 2004-2006 LJ, 1997-2006 TJ, 1976-1986 CJ-7, 1981-1985 CJ-8 https://www.amazon.com/dp/B07THS45WY/ref=cm_sw_r_cp_api_glt_fabc_5X68QNRM9PY3NNVYHXFJ?_encoding=UTF8&psc=1
I drilled one out of mine, it wasn't a huge deal. Make sure you have a small enough bit to not widen the hole, and you can just buy new bolts and rock on. I bought this 3 years back to replace my bad bolts, when I did a CB radio install: https://smile.amazon.com/gp/product/B00UZBWCI2/
Hmm. How about something like this to go with it? Check this out at Amazon Akozon Shift Knob Adapter Universal Car Auto Gear Stick Shift Shifter Knob Head Thread Screw Adapter Replacement Insert Kit for Gear Shift Knob with Size:M81.25 https://www.amazon.com/dp/B07MVGYVMB/ref=cm_sw_r_u_apa_glt_fabc_7WKXESED9JV1RJ2CWVHV Could probably find something like it at your hardware store and save a few dollars.
Thank you. The lights are a set fog and main lamps off amazon... we will see how they hold up....wasnt sure either but great price and major upgrade from stock. On the fenders i use, Meguiar's Ultimate Black Plastic Restorer. The stuff works good then reapply usually once a month.
Link to the lights: Check this out at Amazon Dot Approved 7inch Jeep LED Headlights with White DRL/Amber Turn Signal + 4 inch LED Fog Lights with White DRL Halo Ring for Jeep Wrangler 97-2017 JK LJ Tj https://www.amazon.com/dp/B01MTXNED5/ref=cm_sw_r_u_apa_glc_fabc_7BXH4T9CXFAH3677M4XV?_encoding=UTF8&psc=1
I bought and used these $40 cheapo ones and they work fine. Been on for about a year, so they have seen the elements.
https://www.amazon.com/gp/product/B015X1EW3G/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1