What are
/r/SciontC's
favorite Products & Services?
From 3.5 billion Reddit comments
The most popular Products mentioned in /r/SciontC:
The most popular Services mentioned in /r/SciontC:
The most popular reviews in /r/SciontC:
Gas Cap Scion tC 2004-2008 Genuine Toyota OEM New Fuel Cap https://www.amazon.com/dp/B005CDSWX2/ref=cm_sw_r_cp_apa_i_RRQMCb13ZHK9W This one is oem thts the exact one I used and it cleared all my codes
Found these on Amazon for about 20 bucks. Here’s the link,
STETION Quick Release Latch License Plate Lock Clip 1.25" Diameter Aluminum Alloy Car Hood Pins Lock Clip Kit for Bumper Hood License Plate (2 Pack - Black) https://www.amazon.com/dp/B07HFXR4W7/ref=cm_sw_r_cp_api_glt_fabc_XCNGHHYGF3KYXBG3HXM4
New Uncut Keyless 3 Button Remote Head Key Fob for Toyota Scion MOZB41TG 4D67 Chip; by AutoKeyMax (Single) https://www.amazon.com/dp/B07LHFFK51/ref=cm_sw_r_cp_api_glt_fabc_DA23XNT11212XK1ZWC0S
Video for programming. https://youtu.be/pNmn7fuLRKw
https://www.amazon.com/dp/B005LFTO3S/ref=cm_sw_r_cp_api_glt_fabc_7R2CQEXKJ2DZQT4QRG3Z?_encoding=UTF8&psc=1 Here you go boss. I put mine in the bottom piece of the vent and it seems the most supported that way
I checked on mine over the weekend, the tray is there behind the glovebox but no filter installed.
Found one on Amazon that works well: https://www.amazon.com/gp/product/B0010DZZQA/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
I got the fogs off of amazon (h11): https://www.amazon.com/gp/product/B06Y65Z3YZ/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
I found this install guide for the fogs: https://www.toyotapartsdeal.com/installation/fe718476855bb79888257c7600788e66_my14%20scion%20tc%20fog%20light%20kit%20issb.pdf
SOCAL-LED 4x Car LED Strip Lights RGB 8 Color LED Underglow Kit Underbody Accent Light, Wireless Remote Control, Sound Activated, 36" & 48" Strips https://www.amazon.com/dp/B07PPPY5D1/ref=cm_sw_r_cp_api_i_faxxFbKADCXXS See the link 3 hours of time for the unders, $29.99! Plus blue leds in interior and running lights total cost maybe 50 bucks.
Hey, I’ve got Megan racing coilovers, 2 inches lowered, and here’s a link to the wheels I have on
https://www.amazon.com/MOTEGI-MR116-STRIPE-4x100-00-4x108-00/dp/B006GAQXNQ
These should be the ones, if not it’s the same style and brand.
I found it here:
https://www.amazon.com/Extreme-Online-Store-Deflectors-2005-2010/dp/B07JHSTJLR
its such a nice and mellow spoiler. i found one similar that has a brake light but it doesnt look right. This one is perfect
You can find rubber covers on amazon and trim them as needed.
​
Definitely interesting, I have a few questions/thoughts:
What's the quality of the video like in motion? Between the relatively small video size on a phone and the less than stellar reviews of USB video capture devices like that, it seems like it would've been easier to just buy a display like this ( https://www.amazon.ca/dp/B0746CM3G7/ ) which is about the same price as the video capture device but gives a larger display (and likely clearer due to not needing to convert the video) and could be easily mounted/wired without needing your phone connected every time you want to use it.
On the software side: I didn't have a chance to look through the code much, but how does the app get a signal to start displaying video? Is it just when the camera starts outputting video or is there separate wiring for triggering it?
I'm in software development, but haven't used Android studio since university. Do you know offhand what version(s)/configurations of Android this supports?
Would this work with multiple cameras (likely with app changes) ?
Though the vast majority of people (here especially) would probably add a backup camera with a new radio or separate display, this is still an interesting and unique solution.
NINEO H7 LED Headlight Bulbs for my headlights, and Torchbeam T2 H11 LED Bulb 12000LM for the fogs
Headlights-
https://www.amazon.com/dp/B01MFABBZW?ref=ppx_pop_mob_ap_share
Fogs-
https://www.amazon.com/dp/B0833W5PZB?ref=ppx_pop_mob_ap_share
The watch is from Amazon and a DigiDash is just a digital dashboard I set up with an android device and a Bluetooth OBD2 sensor.
I just designed the wireframe myself!
Looks like one of these https://www.amazon.com/Nitrous-Express-15527-Throttle-Dominator/dp/B001GBJKGW/ref=zg_bs_318361011_sccl_5/131-6875851-7194617?pd_rd_i=B001GBJKGW&psc=1 Car might have had nitrous with a previous owner.
It’s called VHT Nightshades. tint
Garage-Pro Front Bumper Cover... https://www.amazon.com/dp/B07L66ZFL9?ref=ppx_pop_mob_ap_share. I was very skeptical and the way it arrived all folded but it is all plastic and cheap but still looks sold and sporty in a way but I’ll let you know how it is once it’s on and running
Garage-Pro Front Bumper Cover... https://www.amazon.com/dp/B07L66ZFL9?ref=ppx_pop_mob_ap_share. I was very skeptical and the way it arrived all folded but it is all plastic and cheap but still looks sold and sporty in a way but I’ll let you know how it is once it’s on and running
Which head unit does yours have? There are different HUs in the 2nd gen tCs depending on the year. I had the Pt546-00160, which was the standard HU in the 2016 tC. It didn't have RCA or Sub out, so I used an LOC. The performance was not really great as the sub hardly had any bass. It was like the HU was not delivering enough for it to sound good. Did adjust the levels on the LOC itself and on the sub, but that didn't help. What I ended up dong was swapping that HU with an older one from an older Scion tC, which does have RCA and Sub out already. When I switched the HU and connected the sub to the Sub out, the sub was finally giving some output. Even the front speakers have more bass now. Everything else like steering control and the USB all work great, and the lights on the HU even dim with the dash lights when I adjust them. Plug and play basically.
So if you want to install a sub and your HU doesn't have RCA or Sub out, I would strongly recommend going with the aftermarket HU or a compatible factory HU with RCA and/or Sub out.
This is the LOC I used:
https://smile.amazon.com/gp/product/B00CQUL240/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
The old HU that I am now using is the PT546-18130.
Nice, if your camera ever fails though I'd recommend one without the ball mount. I have one like this (not identical, but similar design) for my rear and it's a lot less obscuring: https://www.amazon.ca/dp/B07SRQH4R7/
Amazon for the win! here
So I got it done at an Audio Shop. They told me that they used IDATA Start to make a bypass. Download the WebLinkRS (Android) or WebLink RS (Apple) App on your phone and hit DEMO. Put your vehicle's info, then it'll give you some pointers on what the process for the remote start is like.
I was looking to get some RGBs but I saw these and they were the purple I wanted.
SOCAL-LED LIGHTING 2x H11 H8 LED Fog Light Bulb Advanced 3030 SMD Bright Colorful Daytime Running DRL Lamp, Blue Purple https://www.amazon.com/dp/B07ZQVTC9Y/ref=cm_sw_r_cp_api_i_GMGY9VAK7S6W5BRG9HVP?_encoding=UTF8&psc=1
Front Bumper Lip Compatible With 2005-2010 Scion tC, PU Black Front Lip Spoiler Splitter by IKON MOTORSPORTS, 2005 2006 2007 2008 2009 https://www.amazon.com/dp/B0081V8S2C/ref=cm_sw_r_apan_i_5MD9GA0Y9KXWWDT67R6V?_encoding=UTF8&psc=1
yeah buy a roll of foam that is sticky on one side and put it on anything that causes noise. I did that with mine (i had a sub) so a lot of things rattle but once I installed it completely stopped. use this or you can go to home depot its usually like weather striping weather stipping
I got EOS brand off Amazon. Looks great, easy to install. Only $43
Extreme Online Store Replacement for 2011-Present Scion tC Gen. 2 | EOS in-Channel Style Smoked Tinted JDM Side Window Vent Visors Rain Guard Deflectors https://www.amazon.com/dp/B077S2T8TG/ref=cm_sw_r_cp_api_i_PJXW1XY3B1R2SP7FTNM0
It’s an rvinyl dash kit from Amazon it will cost you about 80 bucks
Yea Ok sounds good then. Yea that is actually a very good price. Retail price is right at 1k anyway. They get better pricing so maybe they are charging $200-$300 for install. That's rare to find. Got off lucky, them prius drivers paying 4k for a CAT!
https://www.amazon.com/Walker-83148-Converter-Catalytic-Integrated/dp/B01HQSIHNA
I'd recommend getting this. It's called a pedal commander and all it does is increase throttle response. It makes the car a lot more fun to drive. It's just plug and play and they're vehicle specific so the one I linked you is meant for 2011-2016 tCs. Also an axle back exhaust and a cold air intake would also help.
I had this professionally installed for 50$ And here’s the link : BOSS Audio Systems Elite BE7ACP Car Multimedia Player with Apple CarPlay Android Auto - 7 Inch LCD Capacitive Touchscreen, Double Din, Bluetooth, No CD/DVD Player, USB, SD, AV in, AM/FM Radio https://www.amazon.com/dp/B08JTQ6HPL/ref=cm_sw_r_cp_api_i_EFV92ZQPF5608PAPM2KK?psc=1 I bought the “used- like new “ just to save some money lol. I’ve had no issues with it. Boss radios are always decent.
I found this one on Amazon, seems legit I suppose.
Front Bumper Lip Compatible With 2014-2016 Scion tC, Ikonmotorsports GT Style Black PU Front Lip Finisher Under Chin Spoiler Add On by IKON MOTORSPORTS, 2015 https://www.amazon.com/dp/B071JY28HM/ref=cm_sw_r_cp_api_i_M4PBE1DZPRAHTT0K2TC5?_encoding=UTF8&psc=1
I used: 3M Scotchprint 1080 BR212 Car Wrap Vinyl Film, Brush Metallic Black, 5ft x 1ft (5 Sq/ft) https://www.amazon.com/dp/B00DJF4O0U/ref=cm_sw_r_apan_i_ZNPZPPY8W6E4GWGCFG50?_encoding=UTF8&psc=1
No adhesion promoter. It took a few hours to do. The ac knob and the stereo trim I just used krylon black matte spray paint on.
ABX Glossy Black Universal Front Bumper Lip Spoiler Diffuser Body Kits + 29"/74.5CM Side Skirt + 17"/45CM Rear Bumper Lip Fit for Most Vehicles 8PCS https://www.amazon.com/dp/B09DP428ZP/ref=cm_sw_r_cp_api_i_8NXE5R6Y57DEZABAXQ04?_encoding=UTF8&psc=1
I am getting this VECLESUS VT1 1080P Wired Car Backup Camera Kit, Easy to Install for Continuous or Reversing Viewing, 4.3" in-Mirror Clip-on Monitor with HD Backup Camera for Cars, Pickups, SUVs, Vans, Sedans, Trucks https://www.amazon.com/dp/B07GW68VZ3/ref=cm_sw_r_cp_api_glt_i_32BQ4MTX0KP1P37AWK73?_encoding=UTF8&psc=1
youre gonna take off the bumper regardless. I have these type of fogs for my 06 and it took a while to install them but the end result makes it better than the grill fogs imo.
Depending what tool(s) you're using, this story may be applicable to you:
​
I remember when I did my first oil change on my '12 (same engine so same oil filter housing). I used the generic oil filter wrenches and had a hell of time. By the time I did my second change, however, I had read up on some forums that a guy was custom making a tool to make oil changes specifically on these housings. He ended up selling some himself and I bought one off him. Night and day difference for how easy it was to do with that new tool.
​
Eventually, he either started working with a company or people started ripping off his design, meaning that you can buy this oil filter wrench for dirt cheap making oil changes way easier and having a tool that's stronger than the generic oil filter wrenches.
​
​
(Of course, if you're already using this (doubtful since you said you damaged yours, which I don't think would happen with the above tool) then this won't help)
Looks like he got the same one I got this one I also recommend the Scosche Double DIN kit. It fits perfectly and has CarPlay and a Volume nob for $174.99. I’ve had no issues other than sound, which might be my speakers, or some connection issues with CarPlay where it doesn’t auto launch CarPlay when I start my car with my phone plugged in.
Spec-D Tuning Glossy Black Housing Smoke Lens Projector Headlights W/Led Signal & Led Strip Compatible with Scion Tc 2011-2013 L+R Pair Head Light Lamp Assembly https://www.amazon.com/dp/B0751KRLC2/ref=cm_sw_r_cp_api_glt_i_F1VCNY3SR7ZWHAYHVJ10?_encoding=UTF8&psc=1
TRUE COMPOSITES Carbon Fiber Sheet & Epoxy Resin Kit (36" x 14" + 16oz of Epoxy) 2x2 Twill, 3K, 5.7 oz. - Carbon Fiber Fabric, Carbon Fiber Repair Kit, Kit de Lámina de Fibra de Carbono y Resina Epoxi https://www.amazon.com/dp/B077Z2RVVW/ref=cm_sw_r_cp_api_glt_i_TJA752TCYV4TXY3TZ14V?_encoding=UTF8&psc=1
I have a first Gen and got this one & love it! It does get hot AF in summer here in VA though but I still think it's worth the trade off! IIRC they are the same for all the manual tC's but it comes with some other adapters for other sizes.
I'm running the same Fahren low beam set on my '10, as well as the Fahren high beam set and the high beams are IMO RIDICULOUS. I can see objects clearly at ~30-40 yards, and still have light to see well past that. I'll get a pic tomorrow night of them if I'm out. Really happy I made the switch to LED.
It’s in your manual. I buy these specific ones for a 2009 tC
Valvoline Advanced Full Synthetic SAE 5W-20 Motor Oil 5 QT https://www.amazon.com/dp/B00GZKC36S/ref=cm_sw_r_cp_api_glt_fabc_4PPFNJFNW4WTKK4QQRX5?_encoding=UTF8&psc=1
OES Genuine Oil Filter for select Scion/Toyota models https://www.amazon.com/dp/B001G7U3B2/ref=cm_sw_r_cp_api_glt_fabc_7K2PJYJGK0CVY35C1GTX?_encoding=UTF8&psc=1
VViViD Extra-Wide Headlight Taillight Vinyl Tint Wrap Roll (Dark Smoke 12" x 24" 2-Roll Pack) https://www.amazon.com/dp/B083LJZ4JC/ref=cm_sw_r_cp_api_glt_fabc_2TWR7FE98DXF5DPST5W0?_encoding=UTF8&psc=1
VViViD Extra-Wide Headlight Taillight Vinyl Tint Wrap Roll (Dark Smoke 12" x 24" 2-Roll Pack) https://www.amazon.com/dp/B083LJZ4JC/ref=cm_sw_r_cp_api_glt_fabc_2TWR7FE98DXF5DPST5W0?_encoding=UTF8&psc=1
Personally, I would just install this and call it a day:
Looks like there is only one left in stock, unfortunately they're not sold as a set of two https://www.amazon.com/dp/B00AYO8J4G/ref=cm_sw_r_apan_glt_fabc_Q9PDSMZ3XGKGAE4ZWW0J?_encoding=UTF8&psc=1
Looks like there s only one left in stock.. Not sold as a set of two
head unit This is the one I used. It is a little bit smaller than the original head unit but I also got these. Dash kit They fill in the space between the head unit and the dash. You will need to sand them down a little and glue or use 3m tape to secure them, but it works and looks great in my opinion.
Encase anyone is finding this later I ended up getting this one with a Scosche Double DIN kit and it fits perfectly and has CarPlay and a Volume nob for $174.99 with so far no issues after a week.
This is the same brand with a 10 inch display. My friend has it in his 2017 Brz and it looks very nice the only complaint is that it sticks out a little bit from the actual trim. I didn't get it because I wanted to have a factory+ look to it.
I personally bought one of the universal ones from Amazon and have had no issues. I think it looks pretty good and fits the factory format pretty well. The only thing I could complain about is due to the odd length of the factory radio there was originally some space between the radio and the trim. To fix this issue I bought some cheep spacers from Amazon as well. Other than that it works great and looks even better. universal aftermarket head unit
Im Canadian so idk if the link will work if you’re from the US, I had to buy the 3 pedal set and the foot rest separately. They were a bitch to install because of how awkward it is to work down there and the break pedal has this weird bend so it makes putting the cover on harder, but it is possible.
Razo RP123A Super Grip Silver... https://www.amazon.ca/dp/B009B6IOJS?ref=ppx_pop_mob_ap_share
Hey! Happy to hear you're upgrading your headunit! I've been using a DMCPA79BT unit off of Amazon for the past 6 months in two different cars, and now my tC. It has a few bugs (sometimes when you end a call with someone, it will freeze and reboot in about 2 minutes), but overall it is a fantastic unit for under 300 bucks. For your tC, you will need a wiring harness adapter. Go on Amazon. I found mine for 5 bucks. It's essentially an adapter that plugs directly to the factory clips. You'll then have a bunch of wires coming out of that adapter, and a bunch of wires coming out of the headunit. You'll essentially just match up the colors and connect them. Make sure you double check the wiring diagrams though. If you have a factory subwoofer, and you would like to retain it, take the power antenna wire from the factory side and connect it to the remote turn on wire from your new fancy head unit. I have a 2005 ajd that worked for me, it should work for you. I've had fantastic success with this headunit and despite its few glitches every now and then, if you're on a budget, this is the way to go. Headunit- https://www.amazon.com/Dual-Electronics-Mechless-Digital-Receiver/dp/B07TNGWMQY/ref=mp_s_a_1_4?dchild=1&keywords=dual+dmcpa79bt&pd_rd_r=d5bff800-474a-415d-9f9f-f01d14c687ac&pd_rd_w=sTGn0&pd_rd_wg=U3pnx&pf_rd_p=ce028c81-ed8c-425...
On my 2013 the rear has notches on the piston so a brake caliper tool can twist the piston down.
My first idea was the replace the cigarette lighter with this setup but I didn’t want loose cables or have my phone out in the open, then I remembered about the extra 12v in the center cubby.
This is what I used and I bought the 3ft one. It’s just enough length to make it to the head unit when you go straight past the shifter, under the little cubby under the AC controls then straight up behind to the radio/head unit.
Also, the harness(adapter) that someone linked to you below is NOT the one for your tC, it’s for the 14 and 15 tC since they both use the same stereo and is different from the one that is used on the 16s stereo, use this harness
https://www.amazon.com/dp/B08F23BGJR/ref=cm_sw_r_cp_api_glt_fabc_9V1X65Y0NZAN1CPDNMHV
I use these for headlights: https://www.amazon.com/gp/product/B07K43XKDF/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
and these for the stock fog lights: https://www.amazon.com/gp/product/B07PGXVJW9/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Thanks. Can I use pretty much any H1 LED bulb? Something like these?
I just got a set of these on amazon they work great plug and play and put off a great white light.
KSP 20mm 5x114.3 Hubcentric Wheel Spacers Fit TC XB, ES300 350, GS300 350 430,IS250 300 350,LS400 430 460,RC300 350, Camry Highlander Tacoma(4 pcs 60.1 bore 12X1.5mm) https://www.amazon.com/dp/B0832X9XFV/ref=cm_sw_r_cp_api_glt_fabc_S7F3G1EJESG0BNQPESJ5?_encoding=UTF8&psc=1
I've got this one in my 2011 regular off the line tC:
https://www.amazon.com/Shift-Knob-Scion-Automatic-Transmission/dp/B0058OV2QO
and apparently the thread is 12x1.25 if that's what you're asking.
This is what i got these LEDs Or.. fuck all other drivers
No, not with stock rims, you need something like these hub centric and keeps the 5x4.5(114.3) studs. You are using Amazon, you can set vehicle filters so that it is only for 2014 tCs
I was considering that although I’m not sure If I want to deal with that if I ever need to remove it again haha. I bought some weather stripping on Amazon and basically stuck it to the bottom of that panel so it doesn’t rub against plastic. Here’s the link to the product I used.
Frost King Sponge Rubber Foam Tape - Minimum Compression, 1/2" W, 5/16" T, 10' L, Black https://www.amazon.ca/dp/B000BQOW7A/ref=cm_sw_r_cp_api_glt_i_9HJ5YD29H0MKKSSMVYFQ?_encoding=UTF8&psc=1
I have one of these: https://www.amazon.com/gp/product/B072FGZDTL/
They have versions with external sensors (no modifications required, they just replace your tire valve caps) and versions with internal sensors (where you have to get the sensors installed within the tires, likely by a tire shop). I have the ones with external sensors so I can use them on both my summer and winter tires. Been going good for 3 or 4 years now with no issues.
​
Edit: Think they are out of stock of some of the Toyota ones, but I'm sure there are other versions on amazon and other sites.
for sure man!!
KSP 20mm 5x114.3 Hubcentric Wheel Spacers Fit TC XB, ES300 350, GS300 350 430,IS250 300 350,LS400 430 460,RC300 350, Camry Highlander Tacoma(4 pcs 60.1 bore 12X1.5mm) https://www.amazon.com/dp/B0832X9XFV/ref=cm_sw_r_cp_api_glt_fabc_F1SY679WZBWZ0T0E853S?_encoding=UTF8&psc=1
I just skimmed through this so I probably missed the explanations, but wouldn't closed-cell-foam insulation work a lot better than the (forgot the name) puffy-cloth-type stuff?
​
Like, I have the butyl sheets (can't remember the brand), and something similar to this to put on top of it: https://www.amazon.com/dp/B07TKXMPH7 . Wouldn't that insulate better than what you're using?
I ordered these online from Amazon for front turn signals, they work with no changes flawlessly.
EverBright 2800Lumen 7507 Led Bulb, No Hyper Flash BAU15S PY21W 5009 12496 Front Rear Turn Signal Bulb, Canbus Error Free Led Turn Signal Lights Amber Yellow 3014 Chipset 144SMD (Pack of 2) https://www.amazon.com/dp/B07NBR4BGH/ref=cm_sw_r_cp_api_glc_fabc_K0L3FbN11N50N?_encoding=UTF8&psc=1
This is the one i bought Borla 11813 Rear Section Kit https://www.amazon.com/dp/B005OBLRCA/ref=cm_sw_r_sm_apa_fabc_6unYFbD5MCQVF i got it for $350 when it was on sale lol. But damn i didn't know the 8.0rs has the exhaust in the middle of the car, thats kinda cool, but i could see how it could be frustrating finding one for it. Oh it comes out the left drivers side, i love the fact no welding was involved , just a simple bolt on.
i replaced both of mine on my 05. they're like $40 shipped on ebay and amazon. you need to buy a pry kit like this to pop it off and then it slides right in.
I got this one on Amazon. Bought my 15 used and it came without the cover. This one has been pretty good so far - never an issue with the rod - it's a mesh cloth, but you can't see through it.
Look into R1 Concepts. I've had their budget (named ELINE) rotors with the basic zinc coating, GEOMET coated rotors, and ceramic pads on my tC2 and they've done great. I've even autocrossed a few times. Right now you can get front drilled and slotted ELINE rotors and ceramic pads for the front for $106 on Amazon. https://smile.amazon.com/dp/B00J4PO684/ref=cm_sw_r_sms_apa_i_7.AZDbJ8NYYK3
I got the amerilites which gives aggressive look cause the LED is like eyebrows instead of them being on the bottom which looks weird tbh
Halos are a nice touch
Includes new bulbs
https://www.amazon.com/dp/B07V7YBFML/ref=cm_sw_em_r_mt_dp_KD6IFb89QBX8Q
Bought these a while ago easy install.
ECCPP Lift Support Rear Hatchback Struts Gas Springs for 2011-2016 Scion tC Compatible with PM3236 Strut Set of 2 https://www.amazon.com/dp/B07FVK49PL/ref=cm_sw_r_cp_api_i_ZW1HFb3C593B9
Love the color, congrats on that. As for your question I'm not sure what is better but I found spacers on Amazon that I know work for the car. https://www.amazon.com/dp/B078T6CQH3?ref=ppx_pop_mob_ap_share
Amazon has both
OE Replacement Scion TC Rear Bumper Cover (Partslink Number SC1100103) https://www.amazon.com/dp/B004GCB804/ref=cm_sw_r_cp_api_i_hS1HFbX5MZ8F7
Go-Parts - for 2014 - 2016 Scion tC Rear Tail Light Lamp Assembly Housing / Lens / Cover - Left (Driver) Side 81561-21330 SC2818111 Replacement 2015 https://www.amazon.com/dp/B07DBRSTDW/ref=cm_sw_r_cp_api_i_QT1HFbYBB9XZY
I think any double din head unit should fit fine, you might need to buy some brackets to be able to mount any double din head unit into the factory mounting holes. As for a specific radio I would use this one personally https://www.amazon.com/dp/B07JDFKQJ5/ref=cm_sw_r_cp_api_i_hK5fFb19JXWJ8
Pretty sure that looks like it came from the side markers. And as stated, are ~~TWO~~ T10 bulbs.
I bought these from Amazon about 4-5 months ago and they still running strong. REALLY bright. For 5.99 for like 12, really a good deal IMO: https://www.amazon.com/dp/B07R15WZN2/ref=cm_sw_r_cp_apa_i_kcTkFb0WVYVHY
Also fun fact: the linked lights also work in your map and ~~some~~ dome lights up front. If you're looking for an LED interior upgrade like I was, one pack of these will get it all done.
EDIT: words
Not a lot of performance gain, but I put the Injen short ram intake on my 2012. It gives it a louder low grunt and it makes a hissing sound as you accelerate. Sounds like a turbo for a second until it really starts pulling air in. Here’s a link on Amazon: Injen Technology SP2116BLK Short Ram Intake System https://www.amazon.com/dp/B0058UHZGO/ref=cm_sw_r_cp_api_i_8hG9EbBD7ZCRW
Cd player you can replace, you could buy a stereo thats touch screen probably for $50 off amazon then have a shop repair it. For the window thing its probably a regulator which is a hard task for non mechanically inclined people so Id as for a quote. Lastly, for the trunk which is common, they sell replacement ones online like this: For 05-10 Scion Tc Rear Hatch Handle Trunk Tailgate Lid Racing Carbon Fiber Look B3721B 05 06 07 08 09 10 https://www.amazon.com/dp/B01DX9RZZM/ref=cm_sw_r_cp_api_i_FstVEbMDP998Q
One thing I’m doing on my 08 right now is sound proofing the cabin using these sound deadening mats to help with the loud cabin noise on the freeway. LED headlights, tinted windows, and interior led strip lights are a good way to start off too. I wouldn’t do any performance upgrades unless you can really work some magic. Borla axleback gives it a nice low grumble if you’re looking for that, although it is around $500. A great set of tires goes a long ways too and a strut bar if you’re gonna be taking sharp corners!
tC looks really nice after clay bar and wax:)
maybe something like this then? It's not bad for the price. Looks about $75.00 right now.
Otherwise have everyone pack a legit duffel bag. I bet four of those suckers would fit pretty easily in the trunk.
Still think you should pack light though.
Thanks for sharing a the product!
Looks like the same store offers the same product for slightly cheap off Amazon
https://www.amazon.com/iJDMTOY-Conversion-Subaru-Toyota-Nissan/dp/B00F4ISG9K?th=1&psc=1
I havne't done this yet, my vehicle already has aftermarket unit but no steering controls. Also mine is stick and the parking brake was never connected, so I am missing a ton of features on my display as the car has to be recognized as being in park to be used (dvd functionality, setting images as background, changing display brightness settings). I was not the one to get the radio installed, it was in when I purchased the vehicle, but I have been looking in to taking care of all of this. I have a friend that has been working in the car audio installation business for about 20 years, and recommends this one: https://www.amazon.com/Maestro-ADS-MSW-Universal-Steering-Interface/dp/B00J4W10XG/ref=sr_1_1?keywords=maestro%20SW&qid=1552594690&s=gateway&sr=8-1&fbclid=IwAR10rJLYoizEYTevnbPtK1qb6QVcjS0EJVFsSq78xBxfvLuMJnE-m_LnHI4 . Apparently you can set custom controls as well, double tap a button, long hold a button, etc. I will most likely be purchasing this one.
​
Backup Camera, Rear View Reverse Camera with Multiple Mount Brackets,Waterproof Reverse Back Up Car Camera -With 26Ft RCA Video Cable, Remove Tool and All Necesssary Parts Included https://www.amazon.com/dp/B07GRY86K7/ref=cm_sw_r_cp_apa_i_CWNKCbTTP5NX6
It's definitely not the best at the job, but it does what I need it to
You are just removing the plastic. There are 3 screws to remove. 2 behind the silver handle and one behind the black plate in the door handle. Then pop up the lock/window trim and unplug them. From there there’s the speaker to unplug. I couldn’t get it so I just left it attached. Didn’t make a difference. Then you peel back the moisture barrier. Go slow, you need to reuse it. From there- use a torx screw to remove the 3 screws on the side of door, holding the actuator in. Then pop out the rods. This part was tough..remember where they go too! You also have to loosen the window bolt to actually get it out. I took the whole thing out and had to reset the window track. Not too hard honestly just something extra. After that, replace all the rods into the new actuator (there are 3) and put it back.
Here’s the link:
https://www.amazon.com/dp/B07KPBHNJR?ref=ppx_pop_mob_ap_share
Thanks for the info. I found a couple preprinted but concerned about quality. Anyone familiar with this:
Dawn Enterprises SCION11-TC Factory Style Flush Mount Spoiler Compatible with Scion tC - Cosmic Grey MICA (1H2) https://www.amazon.com/dp/B01N1A1RMC/ref=cm_sw_r_cp_api_i_cgdgCb6XT17TE
if you happen to find it or if you get a new one from a locksmith you can make a second key for only about $25. order this key from amazon, have it cut for $5 and then follow these instructions to program it.
https://www.amazon.com/gp/product/B00Y1HUZUS/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
the aftermarket ones have a lot of bad reviews that they stop working after a year. i'm just going to get the oem one which is ~$100.
https://www.amazon.com/Genuine-Toyota-81570-21100-Stop-Assembly/dp/B00FZPH7PG
I use the other one that uses a 3m tape to mount. Works great.
Ah yeah, they probably sent you H11 bulbs, which is what the OEM is but the bulbs in those SpecD’s are H7 bulbs.
Try this, however try it at you’re own risk. A lot of these adapters are kinda cheaply made.
Edit: wait, that adapter might not work. It has H11 female and not male.
I bought them about a year ago but I'll check Edit: I found it on Amazon here. They have other colors besides black as well.
I found this, is it possible to ask for prepainted?
Sorry for the late reply!
Here's the best guide I found, although it still doesn't provide enough detail to finish the job when you do your wiring.
What this guide is missing is you have to pop off the the plastic piece that lies around the trunk latch, and run the wires through a small hole through the bumper up into the small tube that runs the lights from the driver's side to the passenger's side. You will have to cut the plastic tubing that cases the wires and use wire nuts to splice the cables into new connections. Wire colors vary by year and other things, so figure them out by unplugging certain sockets.
This will charge super slowly with most phones, some it won't work at all. I have tried using it when a phone is completely drained, and it wouldn't do a thing.
That port is really for plugging in a USB flash drive.
I use these Anker chargers for Pixels, ipads, and a G7 and a Samsung Edge and it says "CHARGING RAPIDLY" with all of them Amazon Link