What are /r/ToyotaTacoma's favorite Products & Services?

From 3.5 billion Reddit comments

Maybe consider a rubber molding to put on the body to clean up just the bare cut end? Something like this

I really like the insert I got for my center console. Got it on Amazon for $13

JDMCAR for Toyota Tacoma 2016 2017 2018, Center Console Organizer Insert ABS Black Materials Tray, Armrest Box Secondary Storage https://www.amazon.com/dp/B07C7WNDZG/ref=cm_sw_r_cp_api_l7PXBb8T8571M

Mothers Back-to-Black. It’s a product that’s used to clean up black plastic and make it look newer again. https://www.amazon.com/dp/B00GZLMEDO/ref=cm_sw_r_cp_api_glt_fabc_X54A61AQCV366SM5G077?_encoding=UTF8&psc=1

Lol this is awesome. I use a regular giant coleman cabin tent and blow up air mattresses to sleep on. Plenty of room for both of us and all of our stuff. Don't even have a topper, just a hard tonneau.

If you take off the bed rails you can fit d-rings behind those bolts too. I wouldnt crank em down with ratchet straps for a heavy load, but they're great for bungee ties

https://i.imgur.com/1GqV97N.png

These ones fit well

Damn this is a good idea, im gonna have to do this too

OP I just managed to find these on Amazon which look like they should work. The description mentions Tacomas, though they're talking about the bed floor mounts. But, if theyre that size they should easily fit behind the rail

I agree. My buddy’s Tacoma has a lightbar and I think roof bars are a little overdone. The rack is from Hooke Road. The lights are from Amazon, here is the link. I made my own custom wiring harness in order to tie all the lights together. 2PCS Round LED Pods Driving... https://www.amazon.com/dp/B07ZDDVF5K?ref=ppx_pop_mob_ap_share

Tri-color Grille Badge Emblem Decoration Accessories Car Truck Label Fit for Tacoma 4Runner Tundra Sequoia Rav4 Highlander (White, Blue, Dark Blue) https://www.amazon.com/dp/B08KW3MKSF/ref=cm_sw_r_cp_api_glt_fabc_ZZ77E2RPFGM7QFM3PVEV

Auto Rover 3D Raised Tailgate Zinc Alloy Metal Insert Letters for Taco 2016-2021 Rear Emblem Decals with 3M adhesive backing (Matte Black) https://www.amazon.com/dp/B07K3MRQL4/ref=cm_sw_r_cp_api_glt_fabc_0V0JXH5D8AGW3EVNF2XR

These are the ones I used, no issues so far after about 6 months.

They’re some cheap ones from amazon. Ratings are pretty good though. The only thing I noticed is the fan is pretty loud if you have the lights on and the taco off. Also, the passenger side light was a bitch to get the clasps aligned.

https://www.amazon.com/dp/B073ZDQ8BK/ref=cm_sw_r_cp_apip_w83sSAH5IUFYZ

I used this for my ‘20 to tap into my rear view mirror. Clean and easy install. Very much worth it

https://www.amazon.com/SimpleUSB-Mirror-Dashcam-adapter-mirrors/dp/B07DMW3DML/ref=mp_s_a_1_2?dchild=1&keywords=Dongar+Technologies&qid=1619183092&sr=8-2

You can buy a factory rail off Amazon for like $50. It's the same rail as 2nd gens.

Genuine Toyota Accessories PT278-35100-BH Truck Bed Header Rail https://www.amazon.com/dp/B00DWVN9CK/ref=cm_sw_r_cp_api_32Q4yb9AMMJZ3

Tailgate $23.99 sold out now but there’s similar sellers

Logos here

FEXON LED Bed Light/Lighting Kit for 2020 2021 & Newer Toyota Tacoma Bed Type Replacement PT857-35200 https://www.amazon.com/dp/B08NV56PBF/ref=cm_sw_r_cp_api_glt_fabc_V1911E9W6DX12PZJRSVJ?_encoding=UTF8&psc=1

It's the slumberjack roadhouse tarp.

https://www.amazon.com/dp/B06Y3NDMLJ/ref=cm_sw_r_cp_apa_glt_fabc_VMN5ZC5AS1W0RJW6CKJT?_encoding=UTF8&psc=1

Worked really well. I got some suction cup clips as well that help a lot.

I used these lights:

https://www.amazon.com/dp/B08KW8D78N/ref=cm_sw_r_cp_apa_glt_fabc_Z2KNMRQBP2G89PWPFCSG?_encoding=UTF8&psc=1

This emblem:

https://www.amazon.com/dp/B08DZR5467/ref=cm_sw_r_cp_apa_glt_fabc_NAK9EFWHSFTN2E0Q6S54?_encoding=UTF8&psc=1

This one sounds a lot like what you’re talking about, I stuck this to my dash and haven’t had any problems through warm or cold weather, holds my iPhone with a thick otter box case on it and is easy to use. Doesn’t require any sort of magnet.

Edit- more info

https://www.amazon.com/dp/B075XZBKBQ?ref=ppx_pop_mob_ap_share

Simple, super flexible, cheap and effective, and no silly drilling or over-complicated assembly. Mount them anywhere, but I put mine on the top of the bezel, the flat top just to the right of the AC vent by radio. I have another on the left side for my 2 way.

Thanks... Yeah it took me awhile to find exactly what I was looking for. The latch is a Destaco 344-R and this is the pin I used: https://www.amazon.com/dp/B00GAZQJ0O/ref=cm_sw_r_cp_apa_glt_fabc_2CAWDDAV70V77SGVH13P?_encoding=UTF8&psc=1

Hope that helps you out!

I’m all about efficiency over branding, you don’t HAVE to spend that much. The link below is the $100 toro 4 channel amp I’m using from Amazon. I was given a toro 300 watt mono amp for my birthday last year because I was adding a sub. It’s SO small you can put it anywhere and they put out such good power I bought the 4 channel right away and sat on it until I decided to do all my speakers a month ago. You want to talk about spending money though, don’t let me tell you how good my fucking sub sounds! I mean, it should, it’s eye-wateringly expensive... but it sounds waaaay better than you’d expect a single 10 to sound. Especially in a little access cab like mine, and for how small the box is... it’s unreal. Check the second link. https://www.amazon.com/dp/B08VC9KDXB/ref=cm_sw_r_cp_awdb_imm_PQ1CCJ28XSZ1WPJ33329

https://www.jlaudio.com/collections/car-audio-stealthbox/products/sb-t-tacacg3-10tw3-car-audio-stealthbox-94658

RockyMounts LoBall Track quick release bike rack pick up truck https://www.amazon.com/dp/B019709IBU/ref=cm_sw_r_cp_api_glt_fabc_KDDWZ3C69M7YV60RMVG8

Genuine Toyota Accessories... https://www.amazon.com/dp/B00DWVN9CK?ref=ppx_pop_mob_ap_share

I used those RockyMounts and that bed rail! It was super easy to put together and it also felt super solid. Our bikes are 29ers so the tailgate pushed right up against the wheel making it even more secure. I highly recommend this setup if you’re on the fence!

Tip...I installed one of these in the upper corner of the bed for a little more secure brake light connection...https://www.amazon.com/dp/B07WCMX24L/ref=cm_sw_r_cp_apa_glt_fabc_F3WMZK2S9PV57QEKEEVQ?_encoding=UTF8&psc=1

VIPMOTOZ Neon Tube LED Tail Light Lamp Assembly For 2005-2015 Toyota Tacoma - Matte Black Housing, Smoke Lens, Driver and Passenger Side https://www.amazon.com/dp/B0743VJ824/ref=cm_sw_r_cp_api_glt_fabc_VA2WJEVRJE5DTNXN4MH9?_encoding=UTF8&psc=1

RAM X-Grip High-Strength Composite Phone Mount with Drill-Down Base https://www.amazon.com/dp/B008JH0XH6/ref=cm_sw_r_cp_api_fabc_D4zTFbJCH9H1Y?_encoding=UTF8&psc=1

Hard to beat a Ram mount to the A pillar!!

BottlePro 2 - Adjustable and Extendable Car Cup Holder Adapter for Hydro Flasks (32oz/40oz), Nalgenes (32oz/40oz), Yeti Ramblers (36oz), Klean Kanteens (32oz/40oz), and Other Large Bottlesamazon

Camelback has it for $9 plus shipping: https://parts.camelbacktoyota.com/parts/2004/Toyota/Tacoma/Base/index.cfm?action=partDetail&section=BODY%20HARDWARE&group=REAR%20BUMPER&subgroup=BUMPER%20%26%20COMPONENTS&component=Housing&partnumber=0022834938&vehicleid=17...

Amazon has a pair for $26 https://www.amazon.com/HERCOO-License-Aftermarket-Replacement-1995-2004/dp/B06XSFBS46

BottlePro - Adjustable and Extendable Cup Holder Adapter for 32/40 Ounce Hydro Flasks, 32 Ounce Nalgenes, 36 Ounce Yeti Ramblers, 32/40 Ounce Klean Kanteens, and Other Large Bottles. Version 2. https://www.amazon.com/dp/B01M028L5E/ref=cm_sw_r_cp_api_i_8TZJFbZYM2D25

YSXHW Self Inflating Camping Pads Thick 4.7 Inch Lightweight Camping Sleeping Pad Ultralight,Compact, Waterproof PVC Inflatable Mat for Tent, Hiking and Backpacking https://www.amazon.com/dp/B07W3YHD9F/ref=cm_sw_r_cp_api_i_uFjHFbQHVHMNW

Not really an upgrade, but something extremely useful that has not only paid for itself but has taught me how to work on vehicles is a good repair manual. Haynes or Chilton are the main 2 I think. Your local auto parts store probably has it in stock. Amazon has it as well. Amazon Link These things are amazing and will step by step show you how to repair almost anything.

Here's the Consumer Reports list I'm talking about. I have come across more articles that debunk this, though.

I have it and can second that it the best mount ever.

A second option would be this - i have both and both are awesome.
https://www.amazon.com/gp/product/B08D712VD9/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&psc=1

Tyger Auto T1 Soft Roll Up Truck Bed Tonneau Cover Compatible with 2016-2022 Toyota Tacoma (Does Not Fit Trail Special Edition with Storage Boxes) | Fleetside 6' Bed (73") | TG-BC1T9045 https://www.amazon.com/dp/B01M1JZHLJ/ref=cm_sw_r_cp_api_glt_i_VHHE0YAF9WCRXRQAK40B?_encoding=UTF8&psc=1

Had mine a few months. No issues.

https://www.walmart.com/ip/3M-Headlight-Restoration-Kit/13023890?wmlspartner=wlpa&selectedSellerId=1250&adid=22222222228009544146&wl0=&wl1=g&wl2=m&wl3=40838676752&wl4=pla-78652144592&wl5=9011147&wl6=&wl7=&am...

You will need a drill to use the kit.

My old Toyota pickup (long before the Tacoma/Tundra years - 1991 year model) just shit the bed in late 2012 with 236k miles on it and just about the only thing I ever had to do to it was regular maintenance.

I say shit the bed, but it was still in running condition and all it needed was a clutch and a new brake line. It wasn't reliable for day-to-day use anymore, not at the level I needed it at the time. I donated it to NHPR and it sold at auction for, I think, $1700.

Fucking thing is probably over in Syria now with a howitzer mounted in the back.

Edit: OK /u/PrintError, not a Howitzer then, some sort of machine gun

I cheaped out with an Amazon order of (effectively) this light bar. I wanted it slimmer than most in order for my canoe to fit without scraping over it. I also went with the 44” instead of 38” due to the shorter one being out of stock at the time. Had to modify the prinsu fairing on my truck. It’s worked without any issue since installing it two years ago.

Got mine on Amazon. No issues and comes with the leveling washer so no error messages. Front Grille Garnish Radar Sensor Cover, Grille Sensor Cover for Tacoma TRD PRO Grill 2018-2019 Replaces TSS Sensor Cover # 53141-35060 https://www.amazon.com/dp/B0882XL38Q/ref=cm_sw_r_cp_api_glt_fabc_MRNCHY2PDAS0RE8ZPGNR

I’ll also mention that the screen comes glossy. I had an extra non-glare iPad screen protector that I applied. Traced the outlying of the screen and cut it out. Worked out well.

iCarez Matte Screen Protector for iPad Pro 12.9 without Home Button 12.9-inches, 2-Pack Anti-glare https://www.amazon.com/dp/B07GZKL8WH/ref=cm_sw_r_cp_api_glt_fabc_R501BTZ91NSK1TFJNCVJ

I’ve had a few sets of vantech bars, can’t beat them for the price

https://www.amazon.com/Vantech-Universal-Pickup-Topper-Ladder/dp/B005PP7ZUS/ref=sr_1_7?dchild=1&keywords=Vantech%2Baluminum%2Broof%2Bbars&qid=1626561234&sr=8-7&th=1

I have this one.

I have had it for 2 months and my dogs go almost everywhere with me and have had no issues. I have a car seat in back as well for my kiddo so I dont strap it up usually but I have done it on just the passenger side when we are going camping and it works great.

Probably try something like this when having your dog riding with you. My dog stuck her head out too far once and almost flew out when I was making a sharp turn and accidentally put her paw on the window button https://www.amazon.com/dp/B005MYY9YC/ref=cm_sw_r_apan_glt_fabc_SMFT19JE0T6T5GP9MCH6

Tonno Pro makes a hard tri-fold cover that locks at 1/3. It's vinyl over aluminum, so it looks like a soft tri-fold, but you get the support and security of the aluminum underneath. It's been a great cover so far. It was less than $500 when I bought mine.

https://www.amazon.com/dp/B01MU3351J/ref=cm_sw_r_cp_apap_BI52jYvvhLFWv

https://www.amazon.com/dp/B07BT9VZKW/ref=cm_sw_r_cp_api_glt_fabc_HJ1HMS8P26HWYJTE8THS?_encoding=UTF8&psc=1

Obviously these are the specific type I used for my TB headlights (different model than yours). Brand is good and I’ve been happy with them. Don’t have all info in front of me but I do know the TB headlights required a different type H bulb than stock TRD sport headlights

These are my headlights https://tacomabeast.com/products/3rd-gen-projector-headlights-w-sequential-turn-signal-light-bar

Those are good questions. I bought them off Amazon.

CARLITS Car LED Strip Lights, 2... https://www.amazon.com/dp/B07K7F7KRS?ref=ppx_pop_mob_ap_share

You can find other sets for cheaper but I saw this one in a video and it worked well. I put it on top of the headlight assembly. I didn’t want to open the headlight assembly. Cracking the seal can let moisture in. If you pop your hood, you’ll see a ridge on the top of the headlight. I stuck it right behind that. The ridge protects it from rain (it’s waterproof anyhow) and it also defuses the light so you can’t see the individual LEDs. The ridge goes all the way to the corner of the headlight. I took my front end apart to install but you could probably do it without removing it entirely. It may be difficult to get it to stickat the very end. You could also cut it to be shorter if needed.

I have the sr5 model so I spliced the LED right onto the turn signal.

Handcrafted Mexican Blankets, Artisanal Handwoven Serape Blanket, Authentic Falsa Blanket, Great As Beach Blanket, Camping Blanket, Picnic Blanket, Outdoor Blanket, Boho Throw Blankets, Mint Orange https://www.amazon.com/dp/B08DKJPTVD/ref=cm_sw_r_cp_api_glt_fabc_MA4NZJQ4SBV2MEENDEXF These are the ones I got, plenty of colors to choose from and decent quality!

I have been using this one from URPOWER for about a year now, using it roughly twice a week, and it’s held up nicely. You’re able to throw it in the washer as well which is a nice touch. Looks like they changed the design recently, mine doesn’t have the paw print pattern viewing window, if that’s a bother then I’m sure any of the other ones on Amazon will work nicely as well.

Picked them up on Amazon . Pretty pricey but I wanted some that didn’t require the straps to the hood & bed, and these were very high quality and held well, even felt secure going down the interstate

> Are you looking at a rear conversion kit?

nope. something like this

>Toyota reputation was not built on 3rd party parts.

if upgrades are available I would prefer to go with upgrades. Obviously I can buy OE parts if I want.

You can get a little stash box that goes inside the tow hitch. You can use this Trimax Standard 5/8" Dia. Resettable Combination Bent Pin Receiver Lock MAG200, Clam Packaging https://www.amazon.com/dp/B000W0OFXG/ref=cm_sw_r_cp_api_glt_fabc_7NKF1QYXZ997SY2K2ZPM?_encoding=UTF8&psc=1 to lock it in place.

https://www.amazon.com/gp/product/B07PLKYKPN/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1

I have the 5" running board. Mostly for door protection as someone on reddit recommended. They've been great so far

Yup, same. I have single air mattress that I throw in mine, put tailgate down and slap the tent up- Good in rain and wind. I camped on the coast which is both. Only complaint is I don't have more time off for fishing trips.

https://www.amazon.com/DAC-Full-Size-Truck-Tent/dp/B007WT1GYQ/ref=asc_df_B007WT1GYQ/?tag=hyprod-20&linkCode=df0&hvadid=242012186291&hvpos=&hvnetw=g&hvrand=5908143975866457682&hvpone=&hvptwo=&hvqmt=&hvdev=c&h...

This is the one! You have to make sure you select / find the long box version though

It's worth it. I'm waiting on a bracket to lower the plate. I'm using a bracket from a Dodge Ram. Apparently it fits. https://www.amazon.com/dp/B07J36WCJN/ref=cm_sw_r_cp_apa_glt_fabc_MY7CZVV3BQKEXTCTT4ZG

I have this one and it works perfectly. It fits in the bed like it was built for a Tacoma, and won't interfere with any tonneau cover either.

https://www.amazon.com/Buyers-Products-Black-All-Purpose-Chest/dp/B003VZGWMG/ref=sr_1_122?dchild=1&keywords=Storage%2BBins%2Bfor%2BTrucks&qid=1622849365&sr=8-122&th=1****

I keep most of my tools in there and just threw two locks on it. Had for over a year with zero problems.

I put these Subie tweeters in my 2016 SR5 - https://www.amazon.com/gp/product/B00PV6F8I2

They're better for sure, and not too expensive. I havent done any of the others yet, been back and forth on an amp setup and head unit swap but that always ends up being more than I wanna spend.

I am running the graco here and it fits well. My wife still has legroom:

Graco Grows4Me 4 in 1 Car Seat, Infant to Toddler Car Seat with 4 Modes, West Point https://smile.amazon.com/dp/B07R9H1JC9/ref=cm_sw_r_cp_api_glt_fabc_03KXMJGMJMQWFCQG2PG1?_encoding=UTF8&psc=1

Yescom 4.6x6.6' Car Side Awning Rooftop Pull Out Tent Shelter PU2000mm UV50+ Shade SUV Outdoor Camping Travel Beige https://www.amazon.com/dp/B075L4YDG3/ref=cm_sw_r_cp_api_glt_fabc_VK67GZE2MY9WZ6GZ0B2F?_encoding=UTF8&psc=1

I have the pioneer app radio 4 in my 2006 It looks nice and fits good. I also installed a backup camera with it. It can be a bit glitchy and buggy at times and it wasn’t exactly intuitive for me to figure out how to use it. However, now that I know what the darn things wants it would be hard for me to switch to something else.
Pioneer AppRadio 4 SPH-DA120 6.2-Inch Capacitive Touchscreen Smartphone Receiver Display https://www.amazon.com/dp/B00O8B7CFS/ref=cm_sw_r_cp_api_glt_fabc_WNPNP1WDAAN62FEJM12D

AKKON - For [TRD PRO U-Bar] [Mono-Eye] 2012 2013 2014 15 Toyota Tacoma LED DRL Projector Black Smoke Headlights https://www.amazon.com/dp/B0899FYKR1/ref=cm_sw_r_cp_api_glt_fabc_83M1BCQSDYDHS3WZWXJA?_encoding=UTF8&psc=1

I have the Husky all weather floor mats in front and back. They are pretty great and fit nicely.

Not sure about a dog ramp, might have to custom make one, but this hammock is the best I've used and I've tried four or five different brands.

https://www.amazon.com/dp/B01LCJB2PO/ref=cm_sw_r_cp_apa_glt_fabc_VHX0RPV67J6QAT226C1K?psc=1

I just recently got the garmin mini dash cam and this adapter for the mirror. (I have a 2017 sport but I think the adapter works on 21) https://www.amazon.com/dp/B07DMW3DML/ref=cm_sw_r_cp_apa_glt_fabc_FN2B3FHW138SR616J4XK?_encoding=UTF8&psc=1

Simple install and works great so far.

Automotive & Marine Fire Extinguisher

Quick Release Mount

I just picked up one of these. Pretty handy if you pick up the header rail. I have an XL sized Trek and my tailgate closes with about an inch to spare.

All-in-one Bike Block Fork Mount - Quick Release Pick-Up Truck Wall Bicycle Storage https://www.amazon.com/dp/B08HYJK7KT/ref=cm_sw_r_cp_api_glt_fabc_Z10Z3QHK939GPTSP23B4?_encoding=UTF8&psc=1

RockyMounts LoBall Track quick release bike rack pick up truck https://www.amazon.com/dp/B019709IBU/ref=cm_sw_r_cp_api_glt_fabc_D8Z5E13MQMRJ51G977Y6

ConceptInks Premium Paint Pen,... https://www.amazon.com/dp/B08H8PKF5W?ref=ppx_pop_mob_ap_share

i tried cheaper tire paint from amazon but they didnt produce the results i wanted. make sure to clean the tire with a degreaser and then use alcohol after to give a good surface.

You can buy the demon brackets on Amazon.

Link to Demon Bracket:

All Sales 88711 2009-19 Toyota Tacoma Demon Bracket https://www.amazon.com/dp/B07PGLK9CD/ref=cm_sw_r_cp_api_glt_fabc_HN185XMTX43C1RY468BX?_encoding=UTF8&psc=1

I got this link for my 2018 from TacomaWorld. These are a lot brighter. Im very happy with them.

Philips 12361B1 H9 Standard Halogen Replacement Headlight Bulb, 1 Pack https://www.amazon.com/dp/B003YMPN3A/ref=cm_sw_r_cp_api_glt_fabc_M1DKCMSVMXTM7ZHE6AED?_encoding=UTF8&psc=1

MPC Plug-n-Play Remote Starter... https://www.amazon.com/dp/B07QLX1TMN?ref=ppx_pop_mob_ap_share

This ones worked great for my 17’ trd off road. Only small complaint is that the truck shuts off when you open the door for security reasons. There’s also an add on for use with your phone.

Nope they aren't custom. These are the mounts: https://www.amazon.com/dp/B01ENW5QBS/ref=cm_sw_r_cp_apa_fabc_jS0cGb4PF5845?_encoding=UTF8&psc=1

And you also need these that slide into the bed rail that the mounts attach to (2 per mount): https://www.amazon.com/dp/B07TTHNWPN/ref=cm_sw_r_cp_apa_fabc_e30cGbXJRJWZT

I have these heavy duty velcro straps (size xl) attached to the tailgate with the existing bed liner screws. Just added a washer so they swivel at the eyelet. The placement is actually perfect to just wrap it around the rim. And they're super secure like this.

https://www.amazon.com/dp/B01MTG0JBE/ref=cm_sw_r_cp_apa_fabc_jYWcGbF4SYEJJ?_encoding=UTF8&psc=1

I LOVE this setup because it leaves the bed almost entirely free to use for other stuff. You can't see it well in this pic but there's a big cooler back there too. Plus I just love the way this looks. I always get compliments at the trailhead and people asking questions about how it's done.

https://www.amazon.com/Genuine-Toyota-4Runner-TRD-PTR20-35110-GR/dp/B07PGR9Z9K/ref=sr_1_3?dchild=1&keywords=TRD+SEMA&qid=1611194726&sr=8-3

Artificial gutter mounts bolted through the sides. That's going to be the easiest legit method.

https://www.amazon.com/Thule-542-Artificial-Raingutters-Gutter/dp/B0002MBP82/ref=sr_1_1?dchild=1&keywords=artificial+gutter&qid=1611178129&sr=8-1

I got mine on amazon for about $10, here. There are many other styles, just search TRD badge. I'm sure you can find them on etsy too.

Judging from the palm trees in your pic, you dont have the snow, salt, sand issue we have in the north. Either way, after your future dirty pic, give this a go. I use it for salt removal up here in the midwest. Car washes shut down at 15 degrees LOL...

https://www.amazon.com/Meguiars-G3626-Ultimate-Waterless-Wash/dp/B006FUT0CS

I personally purchased the $200 cover on Amazon and am happy with it. I live in WA and does a good job of keeping out moisture. But I plan to upgrade to a Diamondback in the future so the Toyota one may be a better option if you don’t plan to upgrade later.

https://www.amazon.com/dp/B07QH7VKCP/ref=cm_sw_r_cp_api_glc_fabc_ZSE.Fb304HVAR

I love my diodes... https://www.amazon.com/gp/product/B082VJ1WJM

Although, they've increased in price over $30 since I bought them just over a month ago. At least on the link I provided.

Baja Designs were high on my list too, I think the price and a little bit of research is what sold me on the Diodes.

Auto Ventshade 1774036 Low Profile Matte Black Ventvisor Side Window Deflector, 4-Piece Set for 2016-2018 Toyota Tacoma Double Cab https://www.amazon.com/dp/B01C710LNU/ref=cm_sw_r_cp_api_glc_fabc_DWu9Fb1JNGQ2V?psc=1

These are the exact ones if youre looking to buy them. Honestly i dont use any product. I just go to your standard self service car wash and take my time with the cleaning

I got a 2021 OR. Went with the short bed. About to purchase a hitch mounted load extender, so that I can carry long 2x4 from that to my roof rails. That was really my only concern with switching from a Chevy 1500 to this.

This

I went with this. I wanted one that would cover the door to keep her from scratching that while sticking her head out the window lol. It even allows you to zip the front in half in case you have a passenger sit in the back with them. Also got the dog seat belt with harness so that she stays a little more still. Lol.

cover

I would suggest throwing away the switch that comes with it. they make switches that perfectly fit in the dead switch holes.

https://www.amazon.com/dp/B0117B1J3W/ref=cm_sw_r_cp_apa_fabc_xo-XFb8T63NPS

As a quick fix a touch up pen will help slightly, but not a permanent solution. It hopefully can help a little.

Edit: TOYOTA Touch up Paint 040 Super White Genuine Scion/Lexus https://www.amazon.com/dp/B0060BELNA/ref=cm_sw_r_cp_api_fabc_OcXVFbRJ8VH8X

That remaining bolt tightens into that little extension piece. See if you can remove that one, pull out that extension piece, and you should be able to see the other end of those broken bolts. I'd pull mine off and take a picture for you, but the bolt for that extension piece is one of the bolts holding my aftermarket bumper on, and I really don't want to mess with that right now. Those two bolts you broke off are two I never reinstalled, so they're open holes that look like they're just nuts welded into the frame member.

Either take it to a local tire shop and give them a few bucks, or torch + easy out (or equivalent, like these: https://www.amazon.com/Irwin-Industrial-Tools-53535-Extractor/dp/B00004YOBF)

It is the "Tyger T1", when I saw the good reviews and the price, it was an easy choice.

https://www.amazon.com/dp/B01M0L5IVL?ref=ppx_pop_mob_ap_share

The "T1" is the roll-up style, T2 and T3 are tri-fold and hard cover respectively.

HTH

They're just cheap pods off of amazon, pretty bright for the price though. I've had them for about two years now and they still work just fine. Put two of these on my roof rack as well https://www.amazon.com/Kawell-K5-5118-6-2-Inch-1170LM-Waterproof/dp/B00GJKXW8M/ref=sr_1_18?ie=UTF8&qid=1470196218&sr=8-18&keywords=led+light+bar+18w

Amazon! https://www.amazon.com/dp/B01L48OM5U/ref=cm_sw_r_cp_apa_-IhWzb8P7ESSD

And I'd say it's about the same brightness if not a little brighter than stock, just swapped to Amber with a bit more throw off to the sides I think. Unfortunately forgot to take before and after pics.

They’re some cheap ones from amazon. Ratings are pretty good though. The only thing I noticed is the fan is pretty loud if you have the lights on and the taco off. Also, the passenger side light was a bitch to get the clasps aligned.

https://www.amazon.com/dp/B073ZDQ8BK/ref=cm_sw_r_cp_apip_w83sSAH5IUFYZ

Any plastic restorer or back to black will just be a temp fix. I just redid my tonneau with a ceramic coating. It’s expensive but solid.

https://www.amazon.com/dp/B00NR8VJP2/ref=cm_sw_r_cp_api_i_DtVLFbHTCMFG7?_encoding=UTF8&psc=1

I also coated my faded window seals. Looks brand new and can put multiple coats. Just make sure and FOLLOW directions and don’t allow it to come in contact with any water for 24 hours after application.

I used a drill brush with a soft foam applicator to do the whole cover. Make sure and clean the cover beforehand with an acidic wash to remove any oils

https://www.amazon.com/dp/B004BFW0EO?ref=ppx_pop_mob_ap_share

I replied to the other persons comment, but $259 from amazon!

Gator Tri-Fold Tonneau Truck Bed Cover 2015-2018 Toyota Tacoma 5' Bed https://www.amazon.com/dp/B01K7PRTR4/ref=cm_sw_r_cp_api_o-xxAbHSRSKDF

Picked up on amazon, 30% off coupon currently being offered. Pads look about same as mine, so even if you don't want to buy a new one, you can contact the company.

Ionic Pro Series 5" Black Curved Nerf Bars 2005-2018 Toyota Tacoma Double Cab https://www.amazon.com/dp/B015R6TXP4/ref=cm_sw_r_em_apa_5vKMAbD3PZ2M6

These were for a 2018 trd, but the sale seemed to be from the seller and perhaps they have some that fit

It’s custom. For the most part at least. I got the grill insert off of Bulletproof Fabricating . Then the leds off of Amazon . Emblem off of original grill. It’s a pretty easy Mod.

Here's a link to amazon where I ordered them:

RockyMounts LoBall Track quick release bike rack pick up truck https://www.amazon.com/dp/B019709IBU/ref=cm_sw_r_cp_apa_i_2TYaBbVCRKBA4

I'm not entirely sure about your question, to be honest. I am new to bikes. Based on some of the "questions answered" on Amazon, it sounds like it might not work for a thru axel bike, but they may sell an adapter or different mount for that.

The mod is the AC control knobs. $15 on Amazon.

Thor-Inst Pack of 3 Interior A/C Air Conditioning Heat Control Switch Knob Button For Toyota Tacoma & VIOS(2002-2006) Vela Vitz YARI, Replacement for Lost or Damaged Knob (Ungraded Luxury Black) https://www.amazon.com/dp/B077QRYD39/ref=cm_sw_r_cp_api_i_MwYcBbJC7DRW5

I got them from the dealership in GA when I bought it, they call them Stealth Running Boards, but I've seen them on Amazon as Iron Cross.

https://www.amazon.com/Iron-Cross-Automotive-8280-1-Patriot/dp/B00R140HI8/ref=mp_s_a_1_5?ie=UTF8&qid=1528587991&sr=8-5&pi=AC_SX236_SY340_FMwebp_QL65&keywords=iron+running+boards&dpPl=1&dpID=41RVmJUfNgL&ref=plSrch

water bottle spout I got off Amazon. The tent is a 23zero Litchfield

Hardware store, walmart, or amazon has it! Many many colors!

https://www.amazon.com/Performix-11203-Multi-Purpose-Coating-Aerosol/dp/B0006SU3QW/ref=sr_1_2?ie=UTF8&qid=1535034567&sr=8-2&keywords=plasti+dip

I got a bed mat from amazon. Good quality, and was about 90 shipped. The shape it shows on amazon isnt correct. Look at customer images. https://www.amazon.com/dp/B00F6XA1IM/ref=cm_sw_r_other_apa_CLsNBb652TDBS

I ordered the grill from Mad Hornets and the lights are from Amazon for the 2016-2018 Tacoma TRD grill. The lights were a little tight but they popped in like they should.

Grill http://www.madhornets.com/3rd-gen-trd-pro-style-grille-with-toyota-letters-for-tacoma-2005-06-07-08-09-10-2011/

Lights https://www.amazon.com/Seven-Sparta-Lights-2016-2018-Toyota/dp/B07MSKPK98/ref=mp_s_a_1_1?ie=UTF8&qid=1549842683&sr=8-1-spons&pi=AC_SX236_SY340_FMwebp_QL65&keywords=tacoma+grill+lights&psc=1

I ordered the grill from Mad Hornets and the lights are from Amazon for the 2016-2018 Tacoma TRD grill. The lights were a little tight but they popped in like they should.

Grill http://www.madhornets.com/3rd-gen-trd-pro-style-grille-with-toyota-letters-for-tacoma-2005-06-07-08-09-10-2011/

Lights https://www.amazon.com/Seven-Sparta-Lights-2016-2018-Toyota/dp/B07MSKPK98/ref=mp_s_a_1_1?ie=UTF8&qid=1549842683&sr=8-1-spons&pi=AC_SX236_SY340_FMwebp_QL65&keywords=tacoma+grill+lights&psc=1

It looks like a standard dual-row lightbar between 20 and 30 inches.

My brother had two of these 9-inch bars on his Jeep hood (flood beam, not spot).

They were very bright. If you don't like the 6000K color temperature, consider a layer of vinyl film like this. Check the Amazon photos to see the process one person went through with multiple layers. Personally, I'd go with a single layer. Applying it to that bar should be simple since it is both small and flat.

Lamin-x film off of amazon. Pretty simple to install, although I need to reorder and re do mine as I messed them up a bit installing them .

Lamin-x T554Y Fog Light Covers https://www.amazon.com/dp/B07JZF7JGT?ref=ppx_pop_mob_ap_share

Thanks man! Those are the Auto Ventshade low profile rain guards. Got them on Amazon. Auto Ventshade 994036 Low Profile Dark Smoke Ventvisor Side Window Deflector, 4-Piece Set for 2016-2018 Toyota Tacoma Double Cab https://www.amazon.com/dp/B01AIFTSEU/ref=cm_sw_r_cp_api_i_KTS9CbTW7H9A6

Im not super handy so I really feel like I accomplished something by doing this myself. I picked up these on Amazon, for $112 after tax, I dont know how I got so lucky because everywhere else they are $399. Its a lease so theres not a ton I can do to her but I really wanted these nerf bars.

YITAMOTOR 23mm Eagle Eye Led Bulb Amber Lights, 9W Super Bright Waterproof Car Motorcycle Daytime Running DRL Light Fog Backup Turn Signal Power Wheel Front Grill Bumper Light, 10-Pack https://www.amazon.com/dp/B018IAZLZC/ref=cm_sw_r_wa_apa_i_VT4HFbRETS4SW