Not sure if this fits your use case, but if you want to store it in your fridge and still lock it up, one of these might do the trick for you.
Ha. I wish I talked to you people first. My address had almost completely rubbed off, so I went in... Scotch Thermal Laminator, 2 Roller System for a Professional Finish, Use for Home, Office or School, Suitable for use with Photos (TL901X) https://www.amazon.com/dp/B0010JEJPC/ref=cm_sw_r_cp_api_glt_fabc_HTTSMH3QNZB4CWR5N78B?_encoding=UTF8&psc=1
get a dab tool and slice off a little chunk when you remove it from the fridge. I usually push the chunk to the edge of the dab tool with my fingernail so that when i touch it to the bucket/coil, it will stick to that and detach itself from the dab tool, if that makes sense.
I use a glass rig so I don’t set actual temperature, other folks here can def give good feedback on that, but rosin doesn’t need extraordinarily high temps. The sheet from gLeaf also has temp reccomdations for terp boiling points. If you taste burnt plant matter, it’s to hot.
Once you get temps down, you’re likely to really enjoy concentrates. There are also these kinds of gadgets, good luck man.
THE TERPOMETER: BLACK - Application tool with Intergraded Thermometer w/ Glob Mops XL (2 items) https://www.amazon.com/dp/B07XLTCFJ4/ref=cm_sw_r_cp_api_glt_i_A3HR0K0G8B9AV0B229ZB
VIVOSUN Air Filtration Kit: 4 Inch 203 CFM Inline Fan, 4'' Carbon Filter and 8 Feet of Ducting Combo https://www.amazon.com/dp/B07Z5WVJJ1/ref=cm_sw_r_apan_glt_i_YP001C8VCP08NR9GTK6S
Carbon Filters need to be replaced but they do work. I wonder if you could toss this in the oven on dehumidify to refresh the activated charcoal.
I actually exhaust through my roof right next to where the sewer gas exhaust is located. No smells.
I pieced mine together through watching different YouTube videos and seeing what others were using.
I started with a non-specific tent ($89 I ordered a 3x3 and got 4x4 by mistake) and a random small clip fan to circulate air. I used some regular ol' dirt and perlite to get started in a fabric pot ($15). I germinated 1 seed ($8) and while that was starting, I then ordered the smallest MarsHydro light I could ($68 https://www.amazon.com/dp/B07VL8FZS1/ref=cm_sw_r_apan_glt_i_dl_VA55F3KTA0G5MQ9S3AJG?_encoding=UTF8&psc=1).
You don't immediately need the fan. I bought the AC Infinity cloudline T6 ($149 on Amazon) with the matching carbon filter ($69), and some ducting ($14).
You'll need a pH meter, but I had decent luck with just filtered water and green leaf mega crop for my nutes. I only did this because every time I pHed- I never had to adjust so I just stopped checking. Get a decent meter and calibration solutions.
I think I might have spent, all in - $500 bucks, and not all once.
Size 1 Boveda fits right in the jar and fixes the dryness in a day or so. I put one in each item from gleaf, goes from powder dry to normal quickly
Boveda 62% Humidor Packets - 2 Way Humidity Control Packs- Size 1 - 20 Count Resealable Bag - Cigar Humidor Accessories - Bulk Humidity Packs - Relative Humidity Packs - Humidor Packet https://www.amazon.com/dp/B07G8GC8TQ/ref=cm_sw_r_cp_api_glt_fabc_DH0WJD0YYAJX6FMEVTJ5
If you have 8 or less varities, you can use little map marker stickers and assign each a color on some index.
I have one of these bags.
this^ i purchased one from a dispensary back in pa when i lived there, amazing has so much room and keeps the smell inside amazon has them HELMET HEAD Extra Large Smell Proof Case + Combination Lock | Water Repellent Smell Proof Bag Container for Your Herbs & Accessories. Includes Grinder Card and Metal Tray (New Grey) https://www.amazon.com/dp/B08CSVCP2K/ref=cm_sw_r_cp_api_glt_fabc_TPX9H0J44HHND9K6QM8Q
Boveda 62% Humidor Packets - 2 Way Humidity Control Packs - Size 8 - 10 Count Resealable Bag - Cigar Humidor Accessories - Bulk Humidity Packs - Relative Humidity Packs - Humidor Packet https://www.amazon.com/dp/B00JV27MF4/ref=cm_sw_r_cp_api_glt_fabc_5Q1GE0HQT2QDJ27K6YK2
Holy crap, I want to apologize, I should have said Papa Joe's. I don't know why I was thinking Pitbull Tobacco. It wouldn't hurt to call Pitbull and ask if they carry them tho because I've never looked at what devices they carry.
Regardless of where you get your Uni Pro, look at getting more of the magnetic adapters. They only give you one and trust me, if you have multiple carts (I've got a lot of D8 carts myself), it gets rather annoying swapping that piece out to different carts. This is what I bought from Amazon at 15-16 for 4 of them. If you don't mind waiting for delivery, you can find listings on Amazon for 15 for 5, I went with this particular one because it was the only Prime eligible listing I saw.
I store them in opaque doob tubes with different colored caps. Like black for an indica one, or something else I’ll associate with the strain. Gleaf at least has also started to label theirs.
The ones I use are like these but I’d picked them up individually at a local head shop: https://www.amazon.com/dp/B07LDNBYGG/ref=cm_sw_r_cp_api_glt_fabc_Z6YJH3XA1VJ5VZJ5KVZE