The ESR one - got it because it was the only non-metal bumper I could find that was lower profile than the Rhinoshield:
ESR Silicone Bumper Case Compatible with iPhone 12/12 Pro, Raised Edge Protection, MagSafe Compatible, Enhanced Heat Dissipation, Lightweight Protective Frame, Cloud Series, Black
I actually had to look it up now...
https://hinative.com/en-US/questions/2065173
Maybe it's very uncommon, it's difficult to judge for me as I don't live in the US. I was sure I had heard it somewhere on the internet.
Wicked Cushions. This is my second pair and I think they’re much comfier than the stock ear cups.
From amazon, it's 10$ I think. Also comes in black. It's really clean looking only one I could find
Edit: 18$
Spigen OneTap Ring Adapter for Mag Safe-Compatibility with EZ-Fit Kit [Add Mag Safe compatibility to non-Mag Safe Case ] - 1 Pack - Matt Black https://www.amazon.com/dp/B07QX2YB3S/ref=cm_sw_r_apan_i_Y3HW6H6SBH28PXQNRRGM?_encoding=UTF8&psc=1
The case I have is this one: https://www.amazon.com/Poetic-Pencil-Flexible-Trifold-Generation/dp/B08KPP99VN/ref=mp_s_a_1_1?dchild=1&keywords=Poetic+Lumos+X+Series+Case+for+iPad+Air+4+2020&qid=1617233061&sr=8-1
If you plan on getting an Apple Pencil also at some point it’s a good case. The edges are raised so the screen doesn’t come into contact with the surface if you have it lying on its face. The cover is similar to the Apple Smart Covers only it’s attached to the case.
I am still using the OEM Samsung S20+ screen skin protector. I purchased this product so that I can swap out the OEM when it gets enough scratches.
https://www.amazon.com/dp/B08BJDBYGK?ref=ppx_pop_mob_ap_share
u/wNg11188 recommended a different one though im probably going to go with:
"Nah, I noticed that the issue is because the flash is so strong, it lights up the whole pane of it and interferes with the pic quality. I found one that doesn't cover the flash module and haven't had an issue. Here's the link to it: https://www.amazon.com/dp/B08DCS6CD5/ref=cm_sw_r_cp_apa_i_Kw0tFbD9JWT9Y"
I recommend the Spigen Ultra Hybrid–just got it recently and still waiting for my Teardown, and Amazon reviews said that it fits over a skin.
https://www.amazon.com/dp/B082LVNZHB/ref=twister_B082LPRV44?_encoding=UTF8&psc=1
The Spigen case appears to accomodate the USB-C plug of the official Steam Deck Dock. I'm not sure if they eyeballed or received design information from Valve. Maybe while you're reaching out to Valve about the fan issue, you could also try asking about the USB C plug design?
https://www.amazon.com/Sticker-XZC-Magnetic-Wireless-Charging/dp/B08Q7XWB85
That's the one I used. If you look at my profile I posted in dbrand the results with pictures. Be sure to put the right side up, they stick on both sides.
Glad it is working well, I'll definitely try it out, partially just to keep the magnet in place. I've been using this magnetic sticker in combination with the MOFT O Snap Phone Stand & Grip (on the same page) and I love the grip itself, but the sticker just keeps coming off my bare phone and doesn't stick well anymore.
I had thought that the rings I linked to before were magnetic but I guess I'm misunderstanding how they work.. would you mind giving me the link to what you used? Or was it just what OP used, the Mophie snap adapter?
This is neat and I want to try it as well. Could I ask how this is going for you guys half a year later? Any lasting issues with the center bubbling or the skin coming "up a bit short along the edges"?
I might try doing it with https://www.amazon.com/Adhesive-Accessories-Python-Trend-One/dp/B09KLPXZ4H/ref=sr_1_2?keywords=magsafe%2Bmetal%2Bandroid&qid=1655226844&sr=8-2&th=1 unless there's a thinner/better one.
Got an otterbox clear case for it. I wanted something light so I could use the metal magnetic disc for my car phone mount.
I bought it from Amazon. Brand is BESINPO. No issues at all with the edges of the skin.
I'm not sure though how long this case stay clear.
It does indeed, what did you pick up?
The AirPod case is by Cyrill: Link
any reliable utility knife would do. this is my go-to.
not sure about the camera cutouts. very carefully, obviously, but maybe someone more experienced with these DIYs could pitch in.
Some of the reviews say they are too loose, but mine snap on just fine and don't come off at all.
I've only been using it since I posted this picture, so not too long. It's definitely grippy. It's my first dbrand case so I can't compare to previous ones. The grip has a really weird feel if you try to feel it and I don't like it but if you just hold the phone to use it, it's actually fine and feels like it won't slip out of your hand. I don't think it'll smudge easily either.
As for the case fitting, it's pretty good. I saw other people mention that it doesn't fit right or the sides feel loose but so far (only been an hour, keep in mind) it's been fine. I'm not sure how much protection it provides. I was using the Spigen Cryo Armor and that case is rigid, this one is not, it's completely soft. I do like that the cameras are flush. It also completely hides the color of the back glass. I ordered the exclusive red edition and it turned out to be more of a salmon color so now I can hide it.
The fans I have are 120mm ac infinity which is usb powered so you can hook it up to the ps5 and it’ll power on/off with the system. The way I have it positioned is the left fan is over the cables, while the right one is lower since I didn’t want to disrupt the intake of the air going into plate vent. I kind of wish I went with the ac infinity airplate to mount towards the bottom or left of the ps5 since that’s where I felt most of the hot air, and so the setup would look cleaner.
As for punching the holes, since I never have to use a hole dozer for any other projects, I went with a cheap one off Amazon. Link below.
https://www.amazon.com/Sipery-4-72inch-Drilling-Plastic-Drywall/dp/B07LCJDHZ1
It’s easy to drill the holes on a thin board. Took less than a minute for each.
Haven't seen any real-world reviews, but there's a company called Galapple that has magsafe cases for Galaxy:
https://www.amazon.com/GALAPPLE-Magnetic-Compatible-Protection-Shockproof/dp/B09QGQMTZL?ref\_=ast\_sto\_dp&th=1&psc=1
I don't think the materials they use would ever wear like Grip case...
For a budget of $12.99, I think you get your value's worth. As I mentioned earlier, I almost always get a Fusion case as a starter to hold me off till my more pricier cases (from other brands) finally arrive. I have other protective products from Ringke as well, from Watch accessories to tablet accessories. If you wait something a little more protective, here's another one of theirs..
Ringke Fusion-X https://www.amazon.com/dp/B09PWLDKSC/ref=cm_sw_r_apan_glt_i_dl_CQP086EMXM0QEKXZTPZX?psc=1
You can also check out their other cases (similarly priced) to see if their styling is to your liking, or even any other brand that's below $20 just to hold you over. As far as the budgets cases from Amazon go, I've stopped using cases from brands such as Spigen since like the Galaxy S6/E. Not fond of their products.
So, a quick review of this case: - The Polycarbonate part doesn't yellow - The Polycarbonate back doesn't scratch easily - The TPU side is sufficiently gripable. The phone's bare sides was quite slippery in my hands. - The only knock I can really give it is on the camera cutout. It's too open than I'd like. I would have preferred it to be more closely fitted around the individual cameras. It would be cool if they made a protective bezel that would fit that area.
It's a minimal; simple design. I'm not dropping this case especially with a PopWallet to grip and a shoulder strap to shoulder when I'm not holding the phone.
Hopefully I will how does it handle with screen protectors more precisely
These two
TORRAS Diamond For iPhone 13 Pro Max Screen Protector Tempered Glass Invisible Border [10X Military Grade Shatterproof] 9H Anti-Scratch Glass Film with Install Frame (6.7 inch) - 2 Pack https://www.amazon.com/dp/B095BCD2XP/ref=cm_sw_r_apan_glt_i_70P1RCF14T862B76WX1Z
amFilm OneTouch Compatible with iPhone 13 Pro Max (6.7", 2021) Tempered Glass Screen Protector and Camera Lens Protector, Edge to Edge Full Coverage with Easy Installation Kit (2+2 PACK) https://www.amazon.com/dp/B09GLP1G3R/ref=cm_sw_r_apan_glt_i_G8RM4SWPXRMVRR5WEH7M?_encoding=UTF8&psc=1
Yea it will. The mount rests on the plate and doesnt take that much space on the inside of the plate. From the pics on DBrand website I can tell that it will still fit.
Wannap Magnetic Wireless Charger Universal Metal Rings - 6pcs,for MagSafe-Compatible Charger on iPhone 13/12 Pro/Max/Mini Case and Samsung Galaxy (3Black+3Silver) https://smile.amazon.com/dp/B075YB8C7F/ref=cm_sw_r_cp_api_glt_i_WXH9ER77R77XHD0T0Q1X?_encoding=UTF8&psc=1
I got this one from Spigen back in Oct 2021 and have had 0 issues. You do lose your magsafe charger, but I think that largely would solve any weak magnet issues you're experiencing.
I have used this mount for about a year now, sometimes with cases, sometimes without (though not with a DBrand case), and it has served me well.
I've been using this one, it's application was fairly easy, I botched the 1st one not noticing there was a sticky line in the middle to help you keep it aligned. I usually prefer tempered glass but this one's been a great plastic one.
So far it's worked with every case I've had, ghostek, a few Spigen case's, and the dbrand grip case.
It's just some cheap one that I found on Amazon! Can be found here.
As for the case, it's on the higher end of cheap Chinese cases. Materials used feel good quality and fit/cuts are clean. I dislike a lot of the case styles there are for this phone design, when it comes to around the camera bump, and this one had one of my favorite looking implementations. I also wanted the back clear, to show off the skin, but the edges colored, because clear edges almost always yellow.
Only thing that I dislike about the case, is that the side buttons are flush with the edge of the case, with etched out shapes for where the buttons are. This makes it hard to feel for exactly which button you are pushing, and heavily relies on muscle memory. I'm constantly missing which button I want to push (mainly volume up)
I just installed the same combo, with matte black on the camera as well.
I picked up this case to go with it: https://www.amazon.com/dp/B09HX388FB?psc=1&ref=ppx_yo2_dt_b_product_details
Looks better than most clear cases, IMO.
Thanks for the response, I was thinking something more like this: https://www.amazon.com/dp/B07YXP3W6Q/ref=cm_sw_r_cp_api_glt_fabc_89R46BJF6XGNP10W4MZJ?psc=1 Where u replace the grip itself, only take 2 screws so is extremely easy todo
I did with the supersheildz screen protectors that I bought. But then I got Some Spigen ones and they went on flawlessly! And it was a better installation method. I highly recommend
Spigen Tempered Glass Screen Protector [Glas.tR EZ Fit] Designed for iPhone 13 Pro Max [Case Friendly] - 2 Pack https://www.amazon.com/dp/B095RQQTRF/ref=cm_sw_r_cp_api_glt_fabc_F9JTZGMAFX265RFHFHZ2?_encoding=UTF8&psc=1
I got the case on Amazon (Case) it's a two part case. The First goes over the screen with a protector and has a bump around the edge of the screen, the second goes over the back. It's not a bad case for the $$
Case 2 is the Samsung official clear oem case.
The camera skin is from sopiguard. (I'm sure I'll get down voted for that 😂)
Lol thanks, here’s the link: https://www.amazon.com/iPhone-Defense-Shield-Case-Iridescent/dp/B07Y1B8FMH/ref=mp_s_a_1_4?dchild=1&keywords=xdoria+defense+iphone+11&qid=1626042585&sprefix=x+doria+de&sr=8-4
Thank me later if you decide to buy it ;)
Maybe it’s just the Apple Pencil isn’t sensitive or you’re not tapping hard enough. Make sure you’re not tapping close to the tip: the sensor is 1-2 inches from the tip. For me, I can tap lighter than the old iPhone force touch and it’ll still reliably register, as long as it’s on the flat side.
Yes its the same. When I went to my order history this is the one that popped up, but it looks the same.
https://www.amazon.com/gp/product/B08BJW8X41/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Mumba Dockable Case for Nintendo Switch, [Blade Series] TPU Grip Protective Cover Case Compatible with Nintendo Switch Console and Joy-Con Controller (Red) https://www.amazon.com/dp/B07Z7DP48D/ref=cm_sw_r_cp_api_glc_fabc_H9Y9FbCC1QDV3?_encoding=UTF8&psc=1
Not with the 12 (haven’t bought one yet) but with everything from the SE 1st gen to the 11 pro max
Here’s the link to Amazon
TORRAS Diamonds Clear iPhone 11 Pro Max Case, [Anti-Yellowing][Fully Protective] Slim Fit Shockproof Hard Plastic Back & Soft Silicone Bumper Phone Case Designed for iPhone 11 Pro Max, Transparent https://www.amazon.com/dp/B07VSNS6Q1/ref=cm_sw_r_cp_api_i_G5gKFbBWKVV4E
Dadanism Smart Case Fit iPad Pro 11 inch 2018 with [Elastic Pencil Holder], Ultra Slim Lightweight Tri-Fold Shell Stand PU Leather Cover, Auto Sleep/Wake Fit iPad Pro 11 inch 2018 Tablet - Dark Green https://www.amazon.ca/dp/B082PGM1GK/ref=cm_sw_r_cp_api_i_NdRvFbEGMXXMC
Nah, I noticed that the issue is because the flash is so strong, it lights up the whole pane of it and interferes with the pic quality. I found one that doesn't cover the flash module and haven't had an issue. Here's the link to it: https://www.amazon.com/dp/B08DCS6CD5/ref=cm_sw_r_cp_apa_i_Kw0tFbD9JWT9Y
if its just the thumbstick, just pop it open and replace that sucker bro
https://www.amazon.com/dp/B07VCJHS76/ref=cm_sw_r_cp_apa_i_26ZhFbT8EFKZW
I've had zero issues with these guys. Goes on clean with zero bubbles if you're careful. Oleophobic coating lasts as well. Best I've had after the Whitestone dome ones.
It’s a silicone grip.. on Amazon
Thanks man! It’s just a silicone grip that I got from Amazon!!
Clear spigen case off Amazon, case link. It works well for what I need. Now, if you use the full skin that goes around the edges, when putting the corners in it can pull them back up.
i-Blason Case for LG G7 /LG G7 ThinQ 2018 Release, [Ares] Full-body Rugged Clear Bumper Case with Built-in Screen Protector (Black/Blue) https://www.amazon.com/dp/B07CZFJ5VR/ref=cm_sw_r_cp_api_i_RZ96DbBY715K5
similar to this one
​
https://www.amazon.com/Compatible-OnePlus-6T-Protective-Resistant/dp/B07JFTF28Y/
Not gonna lie, that forth one for me does look pretty lit.
As for your bumper case, I haven't personally owned a Rhinoshield but I've heard good things.
Link: https://www.amazon.com/RhinoShield-CrashGuard-Absorbent-Protective-Protection/dp/B01JOPJUPC
Or you could try the frames. Here’s a link ESR Crown Metal Bumper Case for iPhone Xs Max, Metal Frame Armor with Soft Inner Bumper[No Signal Blocking][Raised Edge Protection] for iPhone 6.5 inch(2018)(Silver) https://www.amazon.com/dp/B07GJD1VMQ/ref=cm_sw_r_cp_api_i_Rf-3Bb7KC5RT8
Shoot! Should have included true link, my bad!
Here it is:
There is a lip on both the front and back of the case in order to provide protection for the screen and camera bump. Amazon link - iPhone X Slim Bumper Case [Crashguard] Shock Absorbent Minimalist Design Protective Cover [3.5 Meter Drop Protection] Apple iPhone X - Black https://www.amazon.com/dp/B076X2X441/ref=cm_sw_r_cp_apa_O4mSAb8GJY5DJ
I like it a lot. Helps me reach higher up on the phones screen with one had. And gives me a better grip of the phone. I got it off of Amazon. Spigen makes it. lll post the link spigen phone ring