Just got this a couple weeks ago and it's been great. https://www.amazon.com/dp/B01KNWU66W/ref=cm_sw_r_cp_apa_glt_fabc_4H8S3T8KCQWTTD4GA4S7?_encoding=UTF8&psc=1 Nothing fancy but does exactly what you're looking for. The top just slides over the headrest and that's really it. Takes less than 10 seconds. Doesn't slide around at all when I'm driving, although my seats are cloth. It seems like it would work perfectly fine on leather though.
You could also look into one of these helmets that have speakers/headphones built in:
Disclaimer: I do not own this helmet, I'm trying to convince my wife that I need it lol!
It can be done. They make slick style tires in MTB sizes. My suggestion would be to get a second set of rims and that way you just swap wheels instead of switching tires every time you want to MTB.
You’re going to want a shock pump. They’re only like $35 from any local bike shop, or Amazon. If you’re losing weight, you’re going to have to adjust your shock psi somewhat regularly, so you could buy one, but also a shop will do it for probably $10. Awesome of you to use mtn bike as a way to get back in shape. There’s really nothing better. The time flies by once you get addicted to being on your bike and flowing on some awesome trails.
https://www.amazon.com/dp/B005543YUE/ref=cm_sw_r_cp_api_i_T-lqFbTQ56T3J, b
Tubeless kicks ass in the winter, less pressure loss. I'm not sure about full squish in the winter (I've never done it). I would recommend buying extra chain cleaner and maybe some bar mits like these https://www.amazon.com/Bar-Mitts-Mountain-Commuter-Handlebar/dp/B009F9ZQH4/ref=sr\_1\_3?crid=4VUJOGWIP2C6&keywords=bar+mitts&qid=1664324609&qu=eyJxc2MiOiIzLjM1IiwicXNhIjoiMy4xOCIsInFzcCI6IjMuMDcifQ%3D%3D&sprefix=bar+mits%2Caps%2C15...
It's a 94 degree hanger. Just had to replace one on my GT bike. Buy the good one, not the cheap aluminum
Wheels Manufacturing Dropout-94... https://www.amazon.com/dp/B001CJXF8M?ref=ppx_pop_mob_ap_share
Wild guess but if it's an older MTB it might be 27.2. I have three old bikes in that size, but that could be completely wrong. This one is cheap but with a really nice finish.
Since you're going to be at a bike shop, consider a dropper post and maybe some modern 2.4-2.5" tires as long as your forks can fit that without rubbing. More aggressive tread and possibly slightly wider goes on the front, not the back, so the back wheel slips out first on a sandy corner which usually won't take you down, unlike a front tire slipping out which ~~will~~ is more likely to cause a crash. If money is tight a Maxxis DHF in about that width just on the front will help you pick your way through rocks and roots, even if you keep your (presumably) skinnier rear tire. You won't believe how much more surefooted the bike will feel on trails having more grip up front.
Mostly just make sure the bike shop gets your shifters shifting right, and your brakes working right. Replace brake pads if needed. They're cheap. If you have rim brakes maybe have them straighten your wheels so they don't rub, which is usually cheap.
If you have slippery plastic pedals I've been using these since 2017 and they have been super solid and grippy through a million pedal strikes on rocks.
A no-fuss alternative to going tubeless to minimize flats is simply to remove the valve cores and squirt in two ounces of Slime sealant in each tube. Dirt cheap and very reliable. I've been using it for a couple of decades and I almost never flat. Top off with a couple fresh ounces about once a year.
I used to use a small backpack but I don't like the weight on my shoulders on a long ride, so I got a handlebar bottle holder that I mostly use, and also I can get a small bottle in a fanny pack
Welcome back to the sport!
I will agree that the padded shorts are a life saver and I still use them for some longer rides. You will get used to it after a few rides though if you don’t have them. Just don’t stop riding. Increase your distance as your lungs get used to more and more cardio. I use REI brand padded shorts (couldn’t find a link sorry something like $30-40) and here’s the link for my phone mount. It’s held up for about a years worth of abuse so far.
Alright man I currently ride at https://www.alltrails.com/parks/us/california/hulda-crooks-park and hit up the sith trails and most by not all of the black diamond blue trails do u think that this bike will be able to stand the torment or not for at least 6 months without an upgrade.
Chain size has nothing to do with wheel size. It is based off of how many gears your bike has (7, 8, 9...12 speed). Once you purchase the correct chain for your bike's gearing, you will need to be able to "break" some of the links to shorten it. Measure link for link vs your old chain to size it properly.
​
Here's a chain breaker from Amazon: https://www.amazon.com/Oumers-Universal-Mountain-Bicycle-Splitter/dp/B0179JC31I
You'll be fine. I got some squishy generic ones that worked just fine until i bought a set of real pads. Something is better than nothing. I think the more purpose designed pads will do a better job protecting from injury.
Thanks! Any 1-1/8" headset should work. This is the one I used this Origin8 Pro Threadless Headset https://www.amazon.com/dp/B003LRDIHQ/ref=cm_sw_r_apan_glt_fabc_NYHTWJX258F9CZZPDW2S?_encoding=UTF8&psc=1
I really like the sealed bearings.
Here is a link to an Amazon page that had it at one point. Looks like same frame but maybe a different fork?
https://www.amazon.com/K2-Bikes-Zed-Mountain-Bike/dp/B007WAAOFW
It says first available in 2012 on the page. I think k2 is now more of a mass production kind of bike company so I think model years are not as much of a thing for them and they probably made this model without many changes for a number of years.
Headset: BNVB Aluminum Alloy Bike Fork Stem Quill Riser Extender Extension Road Mountain Bicycle Stem Head Up Raiser Handlebar Riser Adapter φ28.6mm x 150mm https://www.amazon.ca/dp/B089YV7Y6X/ref=cm_sw_r_apan_glt_i_T9Q58KB8Z01THD6BNW3A?_encoding=UTF8&psc=1
And it is high tensile steel frame
If the tire is stuck on the rim to where you can't even slip in a tire lever, you can try carefully using a bar clamp. Squeeze the tire together with the clamp just above the rim. Be careful to not clamp the actual rim. This can help get one area unstuck, then use the tire levers.
Something like this: https://www.amazon.com/IRWINQUICK-GRIPOne-Handed-Mini-Bar-Clamp-1964742/dp/B00002244S/
Your not doing anyone any favors by not including information that is printed on the shock. I had to look this up. That should be an RST Gila fork on it currently. It has 100MM of travel, supports a QR hub and has a straight 1 1/8 inch steerer.
This should be a nice low cost upgrade:
https://www.amazon.com/BUCKLOS-Mountain-Suspension-Threadless-Adjustment/dp/B087CH6WL7/
You will most likely want to have someone that knows something about these install it or take to a local bike shop. Good luck and happy riding.
when riding parks I’ll where these goggles over my glasses (OTG). Works great!
OutdoorMaster OTG Ski Goggles - Over Glasses Ski/Snowboard Goggles for Men, Women & Youth - 100% UV Protection https://www.amazon.com/dp/B01HLV5HR6/ref=cm_sw_r_cp_api_glt_fabc_MZZ1XHMJC11XRQ42QFZD?_encoding=UTF8&psc=1
Well for right now, casual trail riding(I think that a term, correct me if I'm wrong), and more downhill type riding when I can actually travel to a mountain bike park. Secondly I am from the area around lake Erie so nothing mountainous. Also can you put a link to the ATX (MSRP $430 USD) so I know what bike exactly you are talking about. Lastly the OBK 27.5 Wheels Mountain bike caught my eyes but can you look at it and judge if its a good choice? Thank you.
Don’t get the toe clips whatever you do. Just get some flats off Amazon for less than $40. Tons of colors to choose from. Something like this will do. FOOKER MTB Pedals Mountain Bike Pedals 3 Bearing Non-Slip Lightweight Nylon Fiber Bicycle Platform Pedals for BMX MTB 9/16" https://www.amazon.com/dp/B07CSPWQJN/ref=cm_sw_r_cp_api_glt_fabc_YZM5FQHPDFQV5NZMMKND?_encoding=UTF8&psc=1
I would say you can definitely get good flat pedals for pretty cheap. Many mountainbike swear by RaceFace Chester Pedals. They are around 40$ I believe AMAZON LINK. As far as running clipless (clipless is when you DO clip in, very confusing I know), it's really up to your kid. I have no confidence clipped in and if he jumping then there is really no reason for him to be clipped in anyways, plus he would need the correct cleats to clip in. Just ask him
As far as the shock, I'd say don't bother replacing it. They are good to have and really take minimal power out of his jumps. And it may even give him cushion for a front case.
Lastly, really sorry for your divorce and I'm glad you are still trying to continue to connect with your kids, it means alot to us (I'm 16)
I don’t if the trail is only 5-6 miles out at most. I’ll do longer rides in northern Michigan that take me 12-15 miles into National forest; I take one then, also bear spray and a tourniquet. I liked the kit I bought off Amazon, it looks like a between version of both kits in the video. The tourniquet wasn’t in the kit, I just felt like it was a good idea to have in bear country.
Surviveware Small First Aid Kit... https://www.amazon.com/dp/B01HGSLB6K?ref=ppx_pop_mob_ap_share
Thank you. The racks are “ Teraysun 2 PCS Bicycle Storage... https://www.amazon.ca/dp/B01ICUM5HA?ref=ppx_pop_mob_ap_share “ from Amazon/China. I bent the hooks away the rack a bit so bigger 2.6 tires would fit. We kept the ply wood finish so we could right messages and draw on it.
Thanks! I found this on Amazon: https://www.amazon.com/dp/B01LXOPYQ4/ref=psdc_15718521_t2_B004VG88MQ, so will give it a try. I watched your video again -- most of those 'top 10' hack videos have 1 or 2 tips that are actually worthwhile, but I found most if not all of yours to be helpful/interesting -- good job!
The Suntour XCR Air is an air shock (obviously). Buy one of these and unscrew that black cap on top of the fork to be able to pump air into the fork. Like others have said you should probably take it to a bike shop to get it serviced.
I use the stem mount that came with my wahoo, it attachs with zip ties and offers much more protection than the out front mounts.
Simular to this one : https://www.amazon.com/dp/B07XJVCKKN/ref=cm_sw_r_cp_apa_i_Z84jFb7DMKCJJ
edit: had to change because I realized you have 27.5"
Ah true. I was actually thinking the extra 8L would be nice for SOME trips, but maybe not for most. And I do like the open front pocket for cramming stuff in.
Last question :) Thoughts on the Lady's LUXE (100oz/7L capacity) and Men's MULE (100oz/11L capacity)? More water, decent space, and the open front pocket. Leaning towards these two if you deem them worthy!
Look into local teams and training rides. In my experience mastering bike handling is almost as important as fitness when it comes to Mountain Biking. The best thing you can do is go ride and build up a nice base of endurance, and once you have said base then introduce interval training. I was a collegiate road cyclist and very recreational MTB rider, and while MTB racing is a different discipline, I found this book helpful for training:
The Cyclist's Training Bible https://www.amazon.com/dp/1934030201/ref=cm_sw_r_cp_api_U-aXybHP3TMT1
For bike maintenance I would recommend this:
Zinn & the Art of Mountain Bike Maintenance https://www.amazon.com/dp/1934030597/ref=cm_sw_r_cp_api_15aXyb67X0WW9
If you need it to be "correct", you'll need more research. If you want it to function, I'd get these-
Shimano RevoShift SL-RS35 Friction 3x7 Speed Shift Lever Set Right/Left 21 Speed Twist Shifter https://www.amazon.com/dp/B01E867WDE/ref=cm_sw_r_cp_apa_oF-gybZC6TGGJ
I was thinking about putting these on it. Do you think these will give me the smoothness I want on pavement and traction on dirt and trails?
There are some bluetooth speakers that can attach to different things, I have these, and they would probably work. I would only use them on very tame trails. http://www.amazon.com/UE-Wireless-Bluetooth-Waterproof-Shockproof/dp/B00YARCGHO