Get 3 of these. Ik they’re expensive but theyre really good quality and fit the size of your monitors.- HUANUO Monitor Mount Stand - Long Single Arm Gas Spring Monitor Desk Mount for 22 to 35 Inch Computer Screens Height Adjustable VESA Bracket with Clamp, Grommet Mounting Base - Holds 6.6 to 26.4 lbs https://www.amazon.com/dp/B07X48X4KM/ref=cm_sw_r_cp_api_i_U-NxFbRKQ7CPK
If you're going to do under desk cable management, try Startech raceway (pictured is 2"x2", but you can get 3"x3" too, for almost half the cost of that metallic monstrosity. I got the idea from Edward Lee.
Looks great!! A recommendation for the cables: wire sleeves . I used something similar and they work well!
Using these VIVO dual vesa mounts!
Entirely possible or I was very unlucky, I'm in Canada. I tried checking the assembly instructions and it doesn't have them listed there either. I used these anyways so it didn't really bother me much. But definitely something for OP to look into if he's expecting them.
I used this tape to keep the Alex Drawers fixed to the Karlby Countertop. Just cut to whatever you feel most comfortable with. I cut 4" sections and placed each around 1" inside of outer edge of Alex Drawers top, then put the Karlby on the top of it and pressed down for about 30 seconds.
ADILS legs: Flip the Karlby upside down on carpeted surface. Place the ADILS leg wherever you plan on having it. Use a pencil or marker to mark all of the holes. Where the marked sections are for the holes, use a drill bit one size smaller than screws and pre-drill 1/2" into the Karlby. Place and align the ADILS leg onto the marked sections and screw in the screws to the holes that you drilled. If you have a impact drill or drill, then use that to screw in the screws, or use a screwdriver.
Hope this helps.
I’ve seen people use adjustable furniture legs to keep the top from sliding around.
Not sure what he used but I watched a video and saw this guy use these If you want them all black like his you can just spray paint them
Officially Licensed Nintendo Switch GoPlay Game Traveler Accessory Pack – Comes with Case, Grip Stand, Cleansing Cloth and Multi–game cases https://www.amazon.com/dp/B07CBGT4BP/ref=cm_sw_r_cp_api_fab_XMkDFbPJ852DG
That’s mine, I highly recommend it if you find it in stock
FURVOKIA 1-Pair Industrial Rustic X Type Metal Legs,DIY Decor Storage Shelf Legs,Furniture Table Legs,Coffee Dining Tables&End Table Legs&Bench Legs(Only Legs 15.7" Tall X 11.8" Wide, Black) by FURVOKIA Factory Store Learn more: https://www.amazon.com/dp/B07KJ7NFP6/ref=cm_sw_em_r_mt_dp_qILzFb798MRJN
28" Tall, Single Table Leg, Office Height - Brushed Steel - from TableLegsOnline by KE Hardware Learn more: https://www.amazon.com/dp/B000WITW86/ref=cm_sw_em_r_mt_dp_QJLzFbCY9BHEA
Are you looking to wall mount then or are you looking for arms?
I wall mounted my dual 27s using two of these:
Duronic TVB1120 TV Bracket Wall Mount Universal Tilt Swivel Cantilever 13\" 15\" 17\" 19\" 20\" 22\" 24\" 30\" Inch LCD | Plasma | LED | 3D | 4K | OLED | QLED TV https://www.amazon.co.uk/dp/B00PEQNZPM/ref=cm_sw_r_cp_api_i_SxRxFbW1F4PZR
Some pictures of how it turned out on my profile
Pretty much every underframe has some slight front to back wobble in standing position, its pretty hard to avoid and i wouldnt worry about it too much. Side to side wobble is worse.. I wouldnt use the karlby top for your setup though. Maybe it'll be ok since youre going to do the sit/stand underframe and it will have cross support, but i personally wouldnt.
THIS is what im using though. I have a G9 and a 32" QLED mounted above it, plus my PC and speakers all on it and its solid.
It is a bit too low, so I added some 3 inch spacers to the Alex drawers. There are tons on Amazon in different heights and styles, for example: https://www.amazon.com/Masendelk-Furniture-Stainless-Adjustable-Cabinet/dp/B09QSYD17F/ref=sr_1_28?crid=26L4BD0687HCP&keywords=furniture%2Blegs&qid=1665677036&qu=eyJxc2MiOiI4Ljk1IiwicXNhIjoiOC43MiIsInFzcCI6IjguMTUifQ%3D%3D&sprefix=furniture%2Bleg%2Caps%2C199&sr=8-28&th=1
Anything like that should give you needed height.
Not a bad idea at all! I definitely suggest having some sort of support that reaches at least the middle of the table - here’s the L brackets I used, they supplied the screws as well :) LuckIn 8-Pack Heavy Duty Shelf... https://www.amazon.com/dp/B088NKFR42?ref=ppx_pop_mob_ap_share
I installed 2 table stiffners on my Ekbacken, I also use a center leg. Now saying that the heaviest items on my desk are my alcohol markers on one end and my laptop on the other end with Micke drawer units under both ends. My husband thought I was being paranoid, but I'm happy that I spent the extra $36 for the extra support in the middle.
Here's where I bought the table stiffners x 2.
https://www.amazon.ca/L-Shaped-Home-Office-Corner-Espresso/dp/B07MFC32XC/ref=sr_1_5?keywords=shw+gaming+desk+l+shaped&qid=1654484068&sprefix=shw+gaming%2Caps%2C79&sr=8-5 if the tinyurl doesnt work, forgot this is a message and not a post! Didn't wanna wall of text and get rolled for it
I think you'd probably be alright, the karlby isn't one of the "mostly cardboard" tops. If you're concerned, it couldn't hurt to add a desk plate that spreads the load from the clamp out. Something like this.
The bigger concern with monitor clamps are the weight putting stress on a small surface area, with lacking internal rigidity.
For the mic, i don't think it would be a concern. I just spent a year or two with a mic with a very small clamp on a MALM desk, which is probably the same, or even worse internal structure as the LAGKAPTEN.
Depending on the weight of the top down camera(say maybe a very hefty DSLR?), MAYBE it would cause an issue down the line. but i still wouldn't be overly concerned about it. but if you were, maybe look at getting a frame that sits on the desk instead of clamps(https://www.amazon.com/Glide-Gear-OH100-Professional-Photography/dp/B06XPFJJ4T that's the first result i saw that fits what i mean.... not that i recommend this specific product)
The power strip on the other hand, I chose a much more expensive unit, but wanted it to be from a reputable manufacturer.
Power Strip by Wiremold, Power Strip with USB, Under Desk Power Strip, Mountable Power Strip, Furniture Power Outlet, 15 Amp, 2 Outlets, Type A/C USB, Black, 10 Feet https://www.amazon.com/dp/B08WHZKBPP/ref=cm_sw_r_cp_api_i_YB8WP4G31GZJDE1RJ5Y7?_encoding=UTF8&psc=1
Thanks! Pretty cheap off Amazon.
Rannb Square Cable Grommet Metal Wire Hole Cover for Computer Desk Table Black 80mm x 80mm - Pack of 2 https://www.amazon.com/dp/B081V4SC2V/ref=cm_sw_r_cp_api_i_5GS0YF2XEZWA7CTH168P?_encoding=UTF8&psc=1
A fair number of people get spacer legs like these ones from Amazon to raise up the table height beyond the height of the Alex drawers.
I thought I might need to get some for me, since they were so frequently in build examples, but after doing a loose fit of the table in my place, I felt I didn't need them.
Something to consider, though.
I have a similar desk setup and I found the Linmon top wasn’t strong enough for the clamp of the dual monitor stand. I ended up getting a monitor stand on Amazon with a base. link
Doesn’t look as clean but also didn’t break so…
I used a desk stiffener. Its a metal (steel I think) V-rod attached lengthwise to the underside of if the desk. Had it for 2 years and works great. No bending or buckling.
The best part is that it’s invisible and out of sight.
Regency Table Stiffner, Metal https://www.amazon.com/dp/B01DOZDUEK/ref=cm_sw_r_cp_api_glt_i_PST9ZG0WSG8ZBV6BJD1R
Govie strip lights
Govee Smart LED Strip Lights, 16.4ft WiFi LED Light Strip Work with Alexa and Google Assistant, 16 Million Colors with App Control and Music Sync LED Lights for Bedroom, Kitchen, TV, Party https://www.amazon.com/dp/B07N1CMGQQ/ref=cm_sw_r_cp_api_glt_i_V9K85TVJ4F3YQH8DD98S?_encoding=UTF8&psc=1
NOUHAUS Ergo3D Ergonomic Office Chair - Rolling Desk Chair with 3D Adjustable Armrest, 3D Lumbar Support and Blade Wheels - Mesh Computer Chair, Gaming Chairs, Executive Swivel Chair (Black) https://www.amazon.com/dp/B07L4ZQMDX/ref=cm_sw_r_cp_api_glt_i_96FA4DGBS3PQ2FWK5SK8
Like someone else already stated, the alex drawers comes with those lil rubber pads that you can use.
i added these on mines to give it a lil extra height (1.2"). also gives it a nice "floating" look to it
I used a cable raceway, just be sure it's thick enough for all your cable's, the one i purchased works but i wish it had a little more room. Also keep in mind when you mount the cable race under your desk to leave room for a monitor arm at the edge if you're using one (i learned the hard way). And buying a pack of Velcro cable ties always helps too!.
Cable Raceway Kit, Stageek Cable... https://www.amazon.ca/dp/B07FFN2HN6?ref=ppx_pop_mob_ap_share
i use a couple of these metal stiffner underneath. its 60" in length which goes perfectly in between the two alex drawers on the 98". Found this from another user through reddit. Like with a middle leg, there are no holes on the bottom so you'd need to drill. With the stiffner, the screws that it came were self-tap screws so i didnt need to drill any holes. Just started with a screwdriver and use a power drill to get it in.
no drilling, it just sits on top of it typically with the lil rubber thing the drawers comes with. I did however added a 1.2in riser. I dont see the table top ever flipping though, its a heavy piece of wood/veneer butcher's block. Computer and monitor dont weight that much to cause it. My main monitor is also wall mounted, only the top monitor is mounted to the desk.
adds perfect height imo and gives it a slight floating look.
saw another user on here that used those and had recommended them. also painted them black
I personally use a 5 foot half slot channel that I got for $15 under my karlby so I didn't need to use a leg. So far I've got no sag with a dual monitor setup.
I use two alex drawers with these underneath for a little bit of extra room
FITUEYES Iron Base Universal Floor TV Stand Swivel Tilt Mount TV Stand Base for 32-65 Inch TVs Corner TV Stand with Height Adjustable Entertainment Shelves Wire Management (Black) https://www.amazon.com/dp/B089485PRD/ref=cm_sw_r_cp_api_glt_i_M1MGNZBKPRN2KPDV4XYV
Its been solid so far.
HUANUO Upgraded Single Monitor Arm, Ultrawide Monitor Mount for 13 to 35 Inch Monitor, Monitor Desk Mount with USB, Height Adjustable Holds 4.4 to 26.4 lbs https://www.amazon.com/dp/B07X48X4KM/ref=cm_sw_r_cp_api_glt_i_HZFPYEVQJCSZ3NGCQ5QZ?_encoding=UTF8&psc=1
Thanks you. I used this Under Desk Cable Management Tray. It great, fits alot of stuff there. I'm constantly adding stuff to my set up so this is great because I can just throw stuff on it.
You could also get a brace and install 1 or 2 along the length of the underside of the desktop. It adds rigidity much like corrugations in cardboard.
Although it’s probably the weakest part of my setup - always worried I’m going to knock it over. I’d probably go for a more solid/substantial stand next time.
I believe you mean the tape Here you go - Double Sided Tape Heavy Duty for Walls Mounting Strong Adhesive Two Sided Clear Tape for Hanging Poster Picture Photo Carpet Decoration Removable Washable Sticky Ghost Grip Roll Safe Strips 17Ft 1Inch https://www.amazon.com/dp/B08SQXRLKF/ref=cm_sw_r_apan_glt_fabc_dl_BQX091ZNA1DTRAS7CQYY?_encoding=UTF8&psc=1
The link for the legs is here
Ruisita 8 Pieces Furniture Couch Legs 6 Inch Round Solid Wood Sofa Legs Natural Wooden Couch Legs Replacement Legs for Armchair, Cabinet, Chair, Footstool, Mid Century Modern Dresser, Natural Wood https://www.amazon.com/dp/B0967GPJPZ/ref=cm_sw_r_apan_glt_fabc_YR4PCX2RGTE849M5YGF8?_encoding=UTF8&psc=1
I used these for mine.
My profile should have pics of my setup somewhere if you want to see what it looks like.
You probably don't need legs this tall but this brand is great. I like them better than the usual IKEA suspects. I've used them with an Ekbacken and a Karlby. Very sturdy.
I found this on amazon
VIVO White 60 x 24 inch Universal Solid One-Piece Table Top for Standard and Sit to Stand Height Adjustable Home and Office Desk Frames, DESK-TOP60W https://www.amazon.com/dp/B07V1JCXRS/ref=cm_sw_r_cp_api_glt_fabc_3BF81BFK5HRM1RY7XP73?_encoding=UTF8&psc=1
But is 23.6 depth
I found this more expensive but is 60x30 i dont know how 30 inch depth would work with the ikea drawers but it comes with 2 grommets and better top material
VWINDESK Wooden Material 60 inch MDF Desktop or Tabletop Only, Matching with Electric Adjustable Standing Desk Frame,with 60mm gromment Holes,White Color(30" x 60" x 1") https://www.amazon.com/dp/B08LN3NQF8/ref=cm_sw_r_cp_api_glt_fabc_Z7ZX8KMAEQW019C5MD66?_encoding=UTF8&psc=1
I used these off Amazon with some felt rubber furniture pads attached to them to prevent the desk from sliding (don’t think it would without them).
I have a glass table and put a wood block on top like you, and underside of the desk...as a temporary measure. now I have a pair of steel plates. They're sturdier than the wood blocks and a little more professional looking being that they're black. As an aside, they have a spongy rubber/felt material between the metal and glass to keep the glass a little safer. This is the one I got
Yeah, think I'm going to get some double sided woodworking tape . I really want to avoid a middle support leg.. perhaps an L bracket on each side and attach to the Alex drawer(s), but not sure if that would really remedy anything as it wouldn't really be load baring. Monitor will be on a VESA mount so only peripherals on mid portion of desk.
Hmm there is a problem with it, because of the position I have it the monitor swings to the left. I had to put something behind it to keep it straight. It's a known problem with the mount I bought
If you're taller, most people put furniture spacers/legs like these to add more height
I got the karlby countertop I got the 74 inch next time I think I will get the 98 inch though when I move. https://www.amazon.com/HEVERP-Furniture-Cabinet-Adjustable-Stainless/dp/B071Z1BCPT/ref=mp_s_a_1_3?dchild=1&keywords=cabinet+legs+heverp&qid=1629213903&sr=8-3
Thank you for the insight. I think I will go with malskytt. Do you reckon it'll make a difference if I buy one of these steel reinforcement frames for the mount?
Table Legs Triangle Shape Table Legs,Cast Iron Dining Table Legs, Side Table Legs,Rustic Heavy Duty DIY Furniture Legs,Square Tube Coffee Table Legs 2 PCS(28” Height 18” Wide) (B) https://www.amazon.com/dp/B08CZ1872Q/ref=cm_sw_r_cp_api_glt_fabc_G8YY8EBVQNZNXEP6PZVY?psc=1
SONGMICS Shoe Rack, Space-Saving 15-Slot Plastic Shoe Storage Organizer Unit, Modular Cabinet, Ideal for Entryway Hallway Closet Garage, 44.5 x 14.2 x 34.6 Inches, White ULPC44S https://www.amazon.com/dp/B074H1WTQX/ref=cm_sw_r_cp_api_glt_fabc_3W3MPTBTMYCSS8TPF4X3?_encoding=UTF8&psc=1
Get kitchen leg rises from Amazon, will raise the desk maybe a couple of inches but should sort that out I believe.
4 Pcs Adjustable Legs, Stainless Steel Furniture Feet, Table Desk Cabinet Kitchen Adjustable Feet Round with Screws(Adjustable Height 0-10mm) https://www.amazon.co.uk/dp/B08MY1LM2K/ref=cm_sw_r_cp_api_glt_fabc_1MJW7K969MHMPTW3S684
Okay thanks for the insight! I took a look at this tabletop: https://www.amazon.ca/gp/product/B0049FSDL0?psc=1 I think I'll just go with this and get the alex drawers. Thanks for the help
CAPITA from ikea https://www.ikea.com/gb/en/p/capita-leg-stainless-steel-30244346/
some even got something similar from amazon:
I use this on my large IKEA desk because I didn't want to damage the top: https://www.amazon.com/gp/product/B074K35TJZ/ref=ppx_yo_dt_b_asin_title_o06_s02?ie=UTF8&psc=1
It works nicely for someone who doesn't want to attach directly to the desktop!
3 Inch Adjustable Metal Desk Table Furniture Legs, Replacement Leg Legs for Coffee Table, Desk, etc, Set of 4 (Black) https://www.amazon.com/dp/B08JPGSS1Y/ref=cm_sw_r_cp_api_glt_fabc_3132D9N0R3X0JB1785QE?_encoding=UTF8&psc=1
I just picked up these with a similar counter top size for my table. I think you’d like them if you’re going for a warmer and darker pallet.
Ekbacken in Black Anthracite
Tolken in Black Anthracite(This is 1/4 inch thinner then the Ekbacken)
I connected them with these and sprayed them matte black. IKEA LINNMON Connecting hardware Bracket, [Nickel Plated] for Attaching Table Top https://www.amazon.com/dp/B01MF7M69B/ref=cm_sw_r_cp_api_glc_fabc_80588PZNQ5SBKTE9C1P1
TOVOT 4 PCS Furniture Cabinet Metal Legs Adjustable Stainless Steel Kitchen Feet Round Black and Silver-1.96" Diameter,60 mm(2.36") Height Sofa Adjustable Feet https://www.amazon.com/dp/B0815YJ6NJ/ref=cm_sw_r_cp_api_glt_fabc_WB0R1H72QW6B9KH3D7KZ?_encoding=UTF8&psc=1
These are what I use. Since they are adjustable. BQLZR Stainless Steel Kitchen Adjustable Feet Round 2" Dia Furniture Leg Pack of 4 https://www.amazon.com/dp/B00KQH8HMU/ref=cm_sw_r_cp_api_glt_fabc_WPZKKMR6H1VXRWAMPZG2?_encoding=UTF8&psc=1
It looks like they discontinued the mouse I have, but here's the pad: https://www.amazon.com/gp/product/B0819ZNG4H/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
It has served me well and I like that it has no branding
I used these kind- They have them on different sizes.
VOVOV Furniture Cabinet Metal Legs Adjustable Stainless Steel Kitchen Feet Round Black and Silver 50 x 50mm Pack of 4 + 16x Screw https://www.amazon.com/dp/B01NCKZRTL/ref=cm_sw_r_cp_api_glc_fabc_pgO8Fb0XWF18X
I just used some kitchen liners. I cut them to the shape of the drawer tops and they act as great grip to rest the karlby ontop and protect the drawers. Super cheap, you can get them at the dollar store as well.
Unless you want to try to add more to the aesthetic, these work great!
I really like these ones.
https://vm.tiktok.com/ZMJnXC7FE/ Here's a video of someone using them as well. I didn't want huge risers, I got these and they're perfect.
have i got the perfect ones for you. i used these on my build. The ikea ones people use here are over 4.5 inches. waay to high imo. the screws are also perfect for 1 inch hick desks like linmon, eckbaken
Picked these up a few months ago- These come with screws and end caps. I bought 2 for each desk but have only used 1 per desk and seems to be holding pretty well. If it starts sagging Ill just add the others as a secondary.
Regency Stiffener for 60" Table Tops https://www.amazon.com/dp/B01DOZDUEK/ref=cm_sw_r_cp_api_glc_fabc_0Np7FbWYGABFJ?_encoding=UTF8&psc=1
I found a 4 pack adjustable for 30ish.
QLLY 28 inch Adjustable Metal Desk Legs, Office Table Furniture Leg Set, Set of 4 (Black) https://www.amazon.com/dp/B07JR33TJC/ref=cm_sw_r_cp_api_fabc_UQbXFb5QGQS8B?_encoding=UTF8&psc=1
Not sure if we can post links here. That’s cheaper than getting 4 adjustable legs from ikea (I just got two for the 15$ olov ones).
Get one of these for your monitor mounts
It'll help distribute the weight.
Hey not sure if this will work but you could get something like these furniture feet and place them on top of the trestles so the top won't move around. Not sure if it will work flawlessly though. Also why do you need three trestles?
Haha it's actually a headphone holder that hangs there! I put my headset there during work when I'm not using it.
Hey man! If you believe the desk will be too short for you here’s a recommendation!.
You can screw them in, but I just used really strong tape to keep them from moving. You can also adjust the height of these if you want them to be bigger. I’ve had them for over a year now so worth.. you will need 2 orders of these since there’s only 4 in a pack :)
I’m not sure if this’ll support the weight of a butcher block I’m buying from a local wood shop but here’s what I play on buying ADEPTUS 6 Drawer Roll Cart Solid Wood, Black https://www.amazon.com/dp/B07F272LWH/ref=cm_sw_r_cp_api_i_FCGxFbVBFH92Y
VILUXY Corner Ceiling Light, Plug-in White Cord Wall Sconce, for Apartments, Dorms, Dining Room, Bedroom 3-Light https://www.amazon.com/dp/B081YR62QN/ref=cm_sw_r_cp_api_i_RNHoFb2E3F0K1
No problem on either request man. Enjoy.
It may be low standing looking at it, but remember when sitting your knees only (likely) sit 23-24 inches from the floor, and there's 29" to the table top. That said, if you like to cross one leg under the other when sitting or whatever it could get cramped.
If that's the case, screw these to the Alex and set the tabletop on them instead. Looks great and adds another 2 inches. There are also 4 inch and adjustable variants of the linked feet/risers.
these my friend
Honestly it's slightly tall for me, but ergonomic enough where I'm not heading my hand, I'm 6'4" so I recommend getting the shorter ones that are height adjustable.
But if you still want the tall ones, which I do, I recommend getting pads for your office chair if the arm rests are not tall enough like I'm doin
I'm in an apartment as well use this, that was the first time I've ever mounted anything and it's super easy just drill a pilot hole and u should be fine it's a vesa mount VideoSecu LCD LED Monitor TV Wall Mount for 19" 20" 22" 23" 24" 26" 27" 30" 32" Flat Panel Screen Maximum Loading 66lbs VESA 75/100 - Ultra Thin Mount Bracket 1EA https://www.amazon.com/dp/B000VKCIJU/ref=cm_sw_r_cp_apa_i_ySZiFbNF265B2
Both monitors are 27” and this is the mount I used: VIVO Dual LCD Monitor Desk Mount... https://www.amazon.com/dp/B009S750LA?ref=ppx_pop_mob_ap_share
The mount is pretty solid. Not a perfect mount, but for the price it exceeded my expectations.
Karlby has been fantastic so far, so beautiful!
Mousepad: Dechanic Extended Heavy(6mm) Control Soft Gaming Mouse Mat - Double Thickness, 36"x12", Yellow https://www.amazon.com/dp/B019D8V1CU/ref=cm_sw_r_cp_api_i_KhrgFbKTVHXCF
The mouse pad is the Luxcoms RGB Large Mouse Pad-- I'd highly recommend it.
I put the counter on two Gray Alex Drawers. I know they're as costly as the countertop, but they're definitely worth it for the aesthetic and storage space. I'm not using any other legs in the middle. I don't see my countertop sagging in the middle (yet).
Alienware 1900R 34.1", Curved Gaming Monitor LED-Lit, WQHD 3440 x 1440p Resolution, 4ms 120Hz Overclocked Refresh Rate, NVIDIA G-Sync, 21:9 Aspect Ratio, HDMI, Display Port, 4x USB 3.0, AW3418DW, Black https://www.amazon.com/dp/B0777RY75V/ref=cm_sw_r_cp_api_i_.jDfFb7BHFVPB
nope! For around $50 I picked up an RK61 on Amazon!
One thing you can do if you want an IKEA setup without the gamery vibe is to buy the SALJAN countertop and ALEX drawers for around $220. All the variants of the SALJAN countertop are clean looking and not gamery, and the gray ALEX drawers look clean and minimal. Check out my post history for an example.
Another desk you can consider is this minimal rustic desk from Amazon. I was considering it versus getting a countertop and drawers from IKEA.
It looks like both would fit well in your home office.
This is the Thermaltake P3 open design case! Heres the link on Amazon if youre curious!
I got these from Amazon. They are black and match my desk, do not slide. you can choose to mount them or not. Also only 2 inches. My desks sits perfectly to my height so its 29 1/2 inches of the floor.
Amazon jialong extended gamepad
JIALONG Extended Gaming Mouse Pad Large Size 900x400mm Ergonomic Multipurpose Comfortable Anti-Fray Stitched Edges XXL Mousepad Desk Mat for Gamer Computer PC Keyboard and Mouse