What are /r/BobcatMiner300's favorite Products & Services?

From 3.5 billion Reddit comments

https://play.google.com/store/apps/details?id=com.bonologue.heliumgeek I'm using this one, it isn't perfect (as it needs port 44158 open to communicate) but have everything to monitor your hotspots and good widget and funny "cash in" notification sound 👍🏻

High as possible. Window doesn't make any difference. These are radio waves, not light waves. There are many posts here about windows. If you can mount your antenna on a stand get it as high as possible - even touching the ceiling. Or, you can physically mount it to the wall with little plastic clips that are used to hang up brooms on the wall.

https://www.amazon.com/gp/product/B07QRR99NQ/ref=ppx\_yo\_dt\_b\_asin\_title\_o08\_s00?ie=UTF8&th=1

I gain nothing from giving you this link, just so you know, this is not a referral link, just trying to help you out. This is the exact Antenna i bought. I have my bobcat miner in my basement window, I ran the cable up to my roof and attached the Antenna to my direct tv dish on my roof and it works great. They have some that have magnetic bases if that is what you require. But the magnetic base makes it lose 1 to 2 dbi.

https://www.amazon.com/dp/B09C5T8378?psc=1&ref=ppx\_yo2\_dt\_b\_product\_details

This is the one you want, it's low loss so better than the stock pigtail

https://www.amazon.co.uk/Female-Pigtail-Antenna-Coaxial-RG-178/dp/B07NVT8FMT/ref=sr\_1\_5?keywords=rg178&qid=1644494977&s=electronics&sr=1-5

>I am not familiar with telegram customer service. Are you refereeing to this website?
>
>https://telegram.org/support. If so I will definitely try that route as well.

My guess, from my personal experience is that you have an antenna problem. Check your connections and be certain the connector on the miner has not been twisted. I wound up replacing the internal connector ( 2 for $5.99 on Amazon) and it was solved.

UFL to SMA Mini PCI U.FL to... https://www.amazon.com/dp/B07T85B3LN?ref=ppx_pop_mob_ap_share

I went with the 8dbi antenna from Rak and it works well for my area.

Make sure to get the RP-SMA version to match the Bobcat miner and get an N Type lightning arrestor such as:

Coaxial N Type Lightning Arrestor 0 to 6 GHz (N-Male/N-Female) 50ohm,Protects 3G, 4G, LTE,GPS, 2.4GHz /5GHz Wi-Fi, 900MHz, Ham Other Outside Antennas https://www.amazon.com/dp/B07JY6TD2T/ref=cm_sw_r_apan_glt_fabc_1YDPQW0A26MFB9WSP3DS?_encoding=UTF8&psc=1

Befor replacing the SD-Card you should first reset/delete the Peer Book and all Blocks via the Dashboard. Then let it fast Sync to the latest Blockchain height and see if it fixes your problem.

If it doesn’t fix your problem then you need a new SD-Card. Try this one since it has the longest lifespan, and the more Space it has the longer it lives.

https://www.amazon.com/dp/B07P4HBRMV/ref=mp_s_a_1_5?crid=15RAZ5R51FODO&keywords=sandisk+max+endurance&qid=1640617131&sprefix=san+disk+max%2Caps%2C172&sr=8-5

Alexa Smart Plugs - Aoycocr Mini Bluetooth WIFI Smart Socket Switch Works With Alexa Echo Google Home, Remote Control Smart Outlet with Timer Function, No Hub Required, ETL/FCC Listed 4 Pack https://www.amazon.com/dp/B07N1JPPXK/ref=cm_sw_r_cp_api_glt_fabc_FTS79CT7VVQBN79PY28G

What is the original plug (EU)? If that’s the case, buy an EU/US to UK plug adaptor [EU/US to UK plug adaptor. Check this

https://www.amazon.co.uk/Adaptor-Toothbrush-Q4U-adapter-European/dp/B07J67BC5W/ref=mp_s_a_1_3?crid=1XBQMVJQDAJKF&keywords=eu+to+uk+plug+adapter&qid=1639618322&sprefix=eu+to+uk+%2Caps%2C204&sr=8-3)

In that case, I think you might have a problem with your antenna's pigtail cable. It's a pretty easy repair.

I am adaptor- challenged! So for $11, you get four different ones to make the connection work.

https://www.amazon.com/gp/product/B07V34ZXQY/ref=ppx\_yo\_dt\_b\_asin\_title\_o07\_s00?ie=UTF8&psc=1

Kind of., I used this product TP-Link AV2000 Powerline Adapter - 2 Gigabit Ports, Ethernet Over Power, Plug&Play, Power Saving, 2x2 MIMO, Noise Filtering, Extra Power Socket for other Devices, Ideal for Gaming (TL-PA9020P KIT) https://www.amazon.com/dp/B01H74VKZU/ref=cm_sw_r_cp_api_glt_fabc_KEYPN1D8BTY1SMV9T3FN?_encoding=UTF8&psc=1

https://www.amazon.ca/gp/product/B07T85B3LN/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&th=1

​

From Amazon Canada

Amazon PoE

Sure! They’re wifi plugs you can turn power on and off to remotely from your mobile device. I’ll post the link to the one I got:

Kasa Smart Plug by TP-Link, Smart... https://www.amazon.com/dp/B079B7SHD8?ref=ppx_pop_mob_ap_share

Amazon link for those interested, 10ft cable.

Bingfu Lorawan Antenna 915mhz 4dBi with 10ft RG58 Cable for RAK Nebra Bobcat HNT Helium Hotspot Miner SyncroBit LoraWan Gateway Lora Module Repeater RP-SMA SMA Antennae Outdoor Lora Antennas https://www.amazon.com/dp/B09D773GBJ/ref=cm_sw_r_cp_api_glt_fabc_Y9V7VHV8EXSTGDQF5YT7?psc=1

The antenna pulls no real weight...if you buy this tripod set up the enclosure sits low enough it is solid...the solar panel support sits fairly low too...this extension pole fits right into this tripod very snug...I ws very happy and its solid...https://www.amazon.com/dp/B0043OAI9M?psc=1&ref=ppx\_yo2\_dt\_b\_product\_details

It's crazy. It's a male connector with a female pin. Wtf right?

Eightwood RP-SMA Male with Female Pin to N Type Male Plug RG58 Coax Cable 3 feet https://www.amazon.com/dp/B07113Y5PD/ref=cm_sw_r_apan_glt_fabc_6NCTKKA72DQHP7MA43WK?_encoding=UTF8&psc=1

Ah yes thank you for reminding to power down. :)

see below how it popped out.

this is the antenna I bought. Kinda overpaid for it. I'm hoping I can get some money back when I return just the cable.

https://www.amazon.ca/gp/product/B09JF3HNNT/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

https://imgur.com/a/p7gK6Pn

I second what u/JettWoo commented. I actually tried the reboot -> resync -> fast sync multiple times over a few days and literally nothing ever worked.

But what did work was reset miner. The tooltip/alt text they have for this option seems daunting - "it will erase all the software and you'll erase all blockchain data." At least I thought it was daunting as hell.

When you dive in a bit more and actually reference this post on Bobcat's website, you realize that the Bobcat is set up with a Docker image. If you're not familiar with what that is, you don't really have to know, but as a developer myself, docker containers are used daily in my world. So when I realized that, the 'reset' is something I do all the time with zero loss in data. So long story short, you just need to do the reset option, it'll take a bit, but then my miner re-synced and was ready to go within a couple of hours.

I'll start the conversation. I put this on my roof in AZ. I wasn't getting anything from the normal antenna in the house, but I only had it on the first floor. Put it up on the tippy top of the roof and it gave me .75 of a helium over 3 days. I'm happy. But I have another miner coming and need one for my house in Nebraska outside Lincoln. Have a 2 story there with a big flat roof section and no homeowners association so can put up my dream set up so if this isn't the best I should put up, maybe someone can help me too.

https://www.amazon.com/Signalplus-Omni-Directional-Antenna-824-960MHZ-Outdoor-Verizon/dp/B0917CPP84/

I can confirm this one works and only costs $7: https://www.amazon.com/gp/product/B00NRHNPUA

It is only half duplex (which is fine for a miner) but I am still able to get over 50mbps up/down.

It’s not the most cost effective: McDuory Adjustable Attic/Outdoor TV Antenna Aluminium Mounting Pole Universal Wall Mounts/Brackets (1 inch Diameter Mount Pole), 32.75 inches Arm Length, Easy Install, Solid Structure, Weather Proof https://www.amazon.com/dp/B08CV33V51/ref=cm_sw_r_cp_api_glt_fabc_P4EVDRSGMFQXCT2JR4EA?_encoding=UTF8&psc=1

I was committed to the location and base, so I bought 4 more for the rod/connection.

8dBi LoRa Antennas 915MHz Kits-Helium Miners Antenna for RAK2 Nebra Bobcat EasyLinkIn Syncrob-16 ft RG58 50Ohm RP-SMA Lightning Arrester https://www.amazon.com/dp/B095LJJN78/ref=cm_sw_r_cp_api_glt_fabc_TQCWA8RD16QRC4DWF9R5?_encoding=UTF8&psc=1

If you just installed a new antenna you might’ve broken the pigtail in your miner. It’s an easy fix though. Buy this UFL to SMA Mini PCI U.FL to RP-SMA Female Ipex Connector Pigtail WiFi Antenna Extension Cable (6 inch (2 Pcs)) https://www.amazon.com/dp/B07T85B3LN/ref=cm_sw_r_cp_api_glt_fabc_5JY9V2MCFQH7YETS991J?_encoding=UTF8&psc=1

It should fix the problem.

Its not wired to the miner, its totally modular and can be easily removed if you wanted to sell your miner. The fan plugs directly to an outlet with its own separate plug. Its usefull to me as I get more than 50 witnesses in my area and I think Bobcat documentation mentions something like the only limit to how many witnesses you can have is the miner overheating. AC Infinity AXIAL 1225, Quiet Muffin Fan, 120V AC 120mm x 25mm Low Speed, UL-Certified for DIY Cooling Ventilation Exhaust Projects https://www.amazon.com/dp/B009OWVUJ0

Ive got quite a lot going on here.

-8dbi Outdoor Rak Wireless Antenna
-Lightning arrestor
-5ft LMR 400 Cable
-Rak Wireless Outdoor Bobcat Enclosure
-PoE injectors (came with rak wireless enclosure) -Outdoor Rated CAT6 cable
-Grounding wire -Grounding Copper metal rod in the floor
-Outdoor mount on the roof
-Visited Home Depot to find the strongest and tallest PVC i could find that would fit in the outdoor mount.
-I am also working on further securing with Guy Wire and needed components there.

There are more little pieces that i needed, such as custom screw and bolt for custom holes i’ve drilled in the PVC. But thats the gist of it.

https://www.amazon.com/dp/B01ETDZ3F0/ref=cm_sw_r_cp_api_glt_fabc_X6C9YEH8GS45EHMD6PS7?_encoding=UTF8&psc=1

I didn’t order any specific bundle, but I’ve got a signal plus 5.8dbi marine antenna on the way..

Signalplus Lora Antenna 915mhz 5.8dBi Outdoor Omni Helium Bobcat Miner Antenna 915MHz 824MHz-960MHz GSM Marine Antenna 15.7inch+3Meters RG58 Cable-for Boat Car ATV UTV RZR SPA https://www.amazon.com/dp/B08THBJXDH/ref=cm_sw_r_cp_api_glt_fabc_MTV2X2NVHGBYJ9PHXGBX

Signalplus Lora Antenna 915mhz 5.8dBi Outdoor Omni Helium Bobcat Miner Antenna 915MHz 824MHz-960MHz GSM Marine Antenna

Signalplus Lora Antenna 915mhz 5.8dBi Outdoor Omni Helium Bobcat Miner Antenna 915MHz 824MHz-960MHz GSM Marine Antenna 15.7inch+3Meters RG58 Cable-for Boat Car ATV UTV RZR SPA https://www.amazon.com/dp/B08THBJXDH/ref=cm_sw_r_cp_api_glt_fabc_RHQBHG3Q4YB29KQ9P80T

Damn widows. You will gave to download, install, configure pip and go through hell.

If you use android you can just download this app:

https://play.google.com/store/apps/details?id=ru.iiec.pydroid3&hl=en_GB&gl=US&referrer=utm_source%3Dgoogle%26utm_medium%3Dorganic%26utm_term%3Dpydroid+3

Then you open up the app, press the 3 lines too left fkd more options, press terminal and then you install requests by typing:

pip install requests

Then be on the same network as miner and run script. Works like a charm here with my android phone.

Pretty simple. 4.5 dBi antenna: Paradar 868Mhz LoRa antenna, weatherproof for harsh outdoor environments, for HNT, LoRaWAN, amateur radio, and aviation - 4.5dBi https://www.amazon.co.uk/dp/B08X2VYW7F/ref=cm_sw_r_cp_api_glt_fabc_BPG3Z8GSGSZ2N46TZTGN?_encoding=UTF8&psc=1 and a decent quality cable: N-Type to RP-SMA Male Extension Cable 3 Metre Lead Low Loss HDF400 Antenna WiFi Part No | XEX-3M-SMA-N-TY it probably needs some more tinkering to tune everything in, but so far it’s exceeded my expectations.

I got this last week LoRa Gateway 915MHz Antenna Outdoor 8dBi Fiberglass LoRaWAN Antenna for RAK HNT Bobcat Helium Hotspot Miner + 3.3ft N-Female to SMA-Male Extension Cable https://www.amazon.com/dp/B095GNTV56/ref=cm_sw_r_cp_api_glt_fabc_YHGFD9QSHCC41N1G3JCB?_encoding=UTF8&psc=1 and im making 2.5 hnt a day. So ya I think location is mire important than antenna

I bought an aftermarket antenna to help with this also, but didnt see any difference with it so I switched back to the stock antenna. Im not gonna claim to understand the differences in antenna… but this is what I bought

Signalplus Helium Bobcat HNT Hotspot Lora LoT Antenna 868/915mhz 10dbi 35.4inch+32.8ft SMA/RP-SMA Cable https://www.amazon.com/dp/B0927J1DCX/ref=cm_sw_r_cp_api_glt_fabc_B0QNGH0N8DEFTH4C6Y2B?_encoding=UTF8&psc=1

Also, my apartment is probably 300 feet off the ground and has great line of sight. I just feel like I should have an advantage.

IPOW Upgraded X-Shaped Double Clamp Universal Long Shockproof Arm Phone Car Mount Windshield/Dash With Strong Suction Cup,Cell Phone Holder Compatible https://www.amazon.com/dp/B013Y4S2RQ/ref=cm_sw_r_cp_apip_YAkjtMbwOzeRL

Double sided sticky tape small amount in middle of fan.

Link: ELUTENG 40mm USB Fan with 3 Speed Control USB Ventilator 5V Max 5300RPM High Flow VR Cooling Fan Compatible for Receiver DVR Playstation Xbox Computer Cabinet Cooling https://www.amazon.com/dp/B071JB9WYB/ref=cm_sw_r_cp_api_glt_fabc_TE268ATTHF6HD3NF74Y2?_encoding=UTF8&psc=1

QILIPSU Hinged Cover Stainless Steel Latch 285x195x130mm Junction Box with Mounting Plate, Universal IP67 Project Box Waterproof DIY Electrical Enclosure, ABS Plastic Grey (11.2"x7.7"x5.1" SSL) https://www.amazon.com/dp/B08B5QN2LS/ref=cm_sw_r_cp_api_glt_fabc_8SQ95ZN5CK1FF1SVA63Y

Instead of using wifi, I recommend buying a Wireless Bridge so you can keep your miner plugged in via ethernet. Example

Man I love your troubleshooting.. Where did you find the information for a metal baseplate? I have a bread pan ready to go like this one https://www.amazon.com/OvenStuff-Non-Stick-Square-Cake-Piece/dp/B001BCNTPY how did you put the antenna?

Did you put it inside the breadpan of did you flip it upside down and put your antenna on top of outside?

Channels? have a look on the play store you can get some WIFI tools that will show you what is your best frequency.

So you can't ping it at all when it's connected via wifi? what IP is it getting in diagnostics? or from your router?

I don’t have good data yet, weather is very different today than when I first identified the problem, so I am tracking it with the wifi thermometer I put in to build a data set.

While I am not enthused about the option because I like my box being fairly discrete, if this does not adequately reduce over all temps applying a radiant barrier like this to the out side of the box is the next step.

Design Engineering 010461 Reflect-A-Cool Heat Reflective Adhesive Backed Sheets, 12" x 24" https://www.amazon.com/dp/B001HYQNVI/ref=cm_sw_r_cp_api_glt_fabc_YTTRVR5DX0W7X6K3RXNY