I really love my Crafty +. I strongly recommend to buy a magnetic charger because the only real problem with it is the cheap usb port. Here's the one I use https://www.amazon.ca/aceyoon-Magnetic-Charging-Powerline-Compatible/dp/B07T94WKH3?pd_rd_w=CJ67U&pf_rd_p=fa0242a7-bed3-4aea-a205-789ddce9f620&pf_rd_r=8YTHM44MQWX2V3QF88FQ&pd_rd_r=44ed62ff-c6d6-4d7c-866b-92df91b4de86&pd_rd_wg=TLEJn&...
Not OP but I do.
They've worked great for me, no cutting. Just dome it on a fingertip and then push it into place so it flattens out to fit.
FWIW, I have the same adapter and bought 25' of this to replace the hose as needed. 3/16" ID and 5/16" OD works perfect with this adapter. I cut my hose a little longer, the original hose was too short and the Mighty always seemed to get knocked over despite the stand. I have about 15" now, seems like a nice length for desktop use and rarely gets knocked over.
They make this in 100' length, but I'm not really sure how long you can go before the vape loses effectiveness. But this size hose fits that adapter nicely, slides right on yet is snug.
Apparently it didn’t work on the post so here is the link. Again it’s to the Canadian one. I’m sure one of you are a wizard and can post one from the USA Amazon if people are interested.
For the Mighty, I buy Gebildet Stainless steel 15mm pipe screens from Amazon 200 for $8.99. They fit like a glove for the CU and bottom chamber screen.
Possibly? The DC barrel is like the most common connection ever, so of course you have a charger “that fits” into the device.
Either way, the mighty comes with a 12v 3a charger. I wouldn’t plug any other type of power supply. Here’s a link to one on amazon that I personally use and actually prefer over the OEM charger bc the barrel is straight instead of bent.
Anyways 12v 3a should probably just be (or already is) stickied somewhere already.
Doob tubes. Can fit about 12 in mine. Cheap, discrete, smell proof. About ten bucks skipped to my door.
I use one of these external HDD cases by Amazon Basics. It's not made to be smell proof, but it does a surprisingly good job, and was cheap.
Here's a picture
Link to the product
I use this one, no creepy tracking. https://play.google.com/store/apps/details?id=org.ligi.vaporizercontrol&hl=en_US
Yeah second the comment about keeping it out of the sun. I use a case just for the mighty and capsules, no charger as the mighty battery is good enough for a day out. And this little fella built for a hard drive but suits the mighty perfectly. This is from the UK and looks like you are in the states but hopefully still available to you. Even a few little pouches for used capsules, cleaning brush, etc....
200 pretty fine screens in a handy plastic case. $9 on Amazon:
I like them as they are fine and keep the CU clean, but you need to swap out the CU screens every few sessions.
These were the ones that were recommended to me, I don’t have any issue with them and they fit like the factory. I’ve never had one fall out, discolor, or have wires come loose.
It’s a fine mesh screen (which I prefer to keep the CU clean)
Sorry for the long link
I’ve been using one of these. You can comfortably fit 2 dosing capsules in each section (6 total) or 3 in each section if you don’t screw them all the way together (but then it’s not super smell-proof). Yeah t has little rubber o-rings between each section to help make it more smell proof. I don’t put my spent caps in here anymore bc if they’re a little sticky on the sides or bottom, they can be hard to get out but for freshly filled caps, it works great
USB micro sucks ass, period. If you can RMA it, do so and when you get it back get a magnetic USB cable and insert the tip into the crafty for the last time ever. You’ll lose the orange plastic thingy, but you’ll never have to worry about that shitty port ever failing again.
I bought several generic silver steel caddies on Amazon. Much cheaper than S&B and they each take 8 caps, so I keep different strains in different tubes.
P.S. the capsule thing is cool for the first few months (unless you NEED to use them for disability) but I found then tedious after the novelty wore off. The only time I use them now is for a day at the beach.
Not an expert but I found a cocktail pick in an old bar set and it works pretty well. I twirl on the sticky wax like pasta and re twirl it onto a heated liquid pad, if that makes sense. The roundness helps.
Buy a 20 inch box fan, tape carbon filter to the back of it, let her rip.
I got a Pelican case, and I just used the regular foam. Get yourself a thin, sharp angled utility knife like this one: https://www.amazon.com/gp/product/B00M6NXHLS. It's really easy to just cut through the foam with that. It's much cleaner than the pick and pluck.
Ultra Clear Platinum Silicone Tubing - Food & Medical Grade - High Temp Hose (10 Feet, 3/16" ID x 5/16" OD) https://www.amazon.com/dp/B082RJB7GP/ref=cm_sw_r_cp_api_glt_fabc_8CCKZ8ND6ZWCWGRYK120?_encoding=UTF8&psc=1
Congrats & welcome to the club.
A stand is probably the best accessory but you can remove put the orange pokey tool back in backwards to help it stand on it’s own until your stand arrives.
A glass mouth piece might help with airflow and the feel/experience but that’s probably mostly preference.
The screen in the heating chamber is type fine. The screen in the cooling unit is type medium or coarse. You can use the device as is but you can also add the spare type fine screen that comes with the device to the cooling unit. You’ll see a lot more avb filling the new fine screen tha before. This should keep the cooling unit cleaner and reduce how often you need to clean it. I got type fine screens here Gebildet 195 pcs Stainless Steel... https://www.amazon.com/dp/B08S31XM5N?ref=ppx_pop_mob_ap_share
Great for micro dosing but even better for keeping the device clean.
I hope you enjoy. Please keep sharing :)
Get yourself a nice powerbank.
No ref link or anything just want to point you in the right direction as I was looking a fair bit for a great charger for my Mighty. I was even carrying that wall charger with me which was not much help out and about in nature XDD
I ordered these tiny measuring spoons & they are perfect for filling my Mighty. The dash spoon is a perfect fit. https://www.amazon.com/dp/B0006GNYM4/ref=cm_sw_r_cp_apa_glt_fabc_K1VXRPZ3EDF14MCF1K0P?_encoding=UTF8&psc=1
This is the one I got great for the crafty the mighty or both Discrete Smell Proof Odorless Bag with Easy Use Combination Lock - The Perfect Stash Box, Medicine Container and Storage Case for Your Accessories That Blocks Out Smells and Strong Odors https://www.amazon.com/dp/B085VWJMY8/ref=cm_sw_r_cp_api_glt_fabc_3EKK3V46QTADQN6TYE5N?_encoding=UTF8&psc=1
Or, you can buy these https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_cp_apa_glt_fabc_SJR2ZSNXTVWVPHDB69JV and keep your CU cleaner longer. These will restrict airflow very slightly, but will keep way more avb out of the CU. Just replace the screen after every cleaning.
Awesome idea! Do you think this adapter would work/fit too?
CERRXIAN 65W PD USB Type C Female Input to DC 5.5mm x 2.5mm Male Power Charging Adapter for Compatible with Lenovo IdeaPad Z560 Z570 Z575 Z565 U310 U400(5525a) https://www.amazon.ca/dp/B087CMZ965/ref=cm_sw_r_cp_api_glt_i_GWAZ4X4H5XQ13JD9HVC0
I found this to be too cumbersome. I got some replacement screens on Amazon and replace them every clean.
I got these and they fit right in the CU, although not perfectly. You push them in with your finger and they will have a slight inward curve, but they work great.
this case for the mighty fits perfectly.
Saw it suggested somewhere in reddit and bought it straight from Amazon. Looks just like that and is made for the go pro
Levoit Air Purifier with True HEPA Filter Active Carbon Filtration, Captures Allergies, Bacteria, Dust, Mold, Pollen for Home Air Cleaning, Reduces Odors of Smokers, Pet, Chemicals, 3 Speeds Plus Night Light and 100% Ozone Free, LV-H132 https://www.amazon.ca/dp/B071D58ZY5/ref=cm_sw_r_cp_api_XnpRBb1TMWCPK
Something like this bud: 99.9% ISO Amazon UK
99% ISO is fine, according to S&B themselves.
I'm a fan of using pads likes these for the main unit.
One thing I'm thinking about is one of those portable Anker Power Banks that can charge the Mighty with the necessary 45W for fast-charging.
edit - this sorta thing.
Sorry for Canadian link :P but here's what I got from Amazon on Prime:
And you nailed it. I disassemble the CU (stem out, 3 o-rings out, detach top and bottom of CU). I've done a "lazy" clean where I don't even take apart the CU, and it works as long as it isn't too dirty.
Try to be careful with the O-rings but especially the stem's ring and the inner ring for the CU as they're pretty small. In my carelessness have almost lost both when I drain the dirty alcohol.
Isopropyl is cheap where I live but you can re-use the alcohol if that's your thing; I generally just dump and use a fresh batch, but whatever works.
The proprietary charger it comes with is shit. I've been using a laptop type one for 8 months from amazon that has been without fault.
200 PCS 5/8 Pipe Screen, 100%... https://www.amazon.ca/dp/B07W6WZ9PH?ref=ppx_pop_mob_ap_share
011 Silicone O-Ring, 70A... https://www.amazon.ca/dp/B000FMWNZ8?ref=ppx_pop_mob_ap_share
Hopefully this works. The rings are a little thicker, but fit the middle post of the cooling unit.
I'd assume holding that and finding a place to put it down midway would get annoying.
I use [https://www.amazon.co.uk/Glass-Globe-Bubbler-Portable-Vaporiser/dp/B09HQNBNHH/ref=mp_s_a_1_2?crid=XLHYAAQC9VCL&keywords=glass+globe+bubbler&qid=1660145863&sprefix=glass+globe+bubbler%2Caps%2C114&sr=8-2](this bubbler) plus [https://magicvaporizers.co.uk/water-pipe-adapter](this adapter) (I halved the length of the pipe)
These are ones linked in this sub before. Works perfect on crafty and mighty (+) as well as pipe screens
For those days ppl won't vape
Ask storz to send you a new charger. I had 3 replacement chargers and they all eventually broke in the same way. I gave up and after the most recent replacement, I just bought 12v DC 5.5mm extension cables.
At least this way these extension cables will break instead of the charger. The extra length was nice as well.
Hey, if you haven't found it, this is the case; I don't work for Stashlogix (probably would've spelled the name right the first time lol) but this is the essential case for a Crafty+ owner; it's smell proof and light and appears to be a perfect fit. https://www.amazon.ca/Dotsero-Pocket-Size-Handbag-Control-Black/dp/B087HVXND5?ref\_=ast\_sto\_dp&th=1
I was in the same boat couple days ago. As previous guys said you might need an adapter, depending on the size of your bong. I got a new huge one which is 18mm so I bought these adapters https://www.amazon.co.uk/gp/product/B09G65DKJM/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
and after testing them just now I can confirm that they work great! :)
There are 12v powerbanks, mine has 6 18650(12v/6000mah) and holds 3 times the charge of the mighty:
[66.6Wh 2022 Edit: link broke]
there is also a 33.3Wh and 100Wh edition
(be aware the mighty charges with 12v, these puppies with 12.6v and discharge with 9V-12.6V adaptive, so it is save to charge the mighty with them but u cant charge them with the migthy charger and vice versa)
I had the same issue with the whip not being long enough. Bought this tubing and it fits like a glove and gives you plenty of breathing room.
It’s 12.0v and 3.0a I believe. But you should only care about voltage. 12volts 509amps would still work… the device would just only draw 3a. Likewise, 1amp would work too, it would just charge slower. Facmogu DC 12V 3A Power Adapter, 36 Watt AC 100-240V to DC 12V Transformers, Switching Power Supply for LCD Monitor, Wireless Router, CCTV Cameras 2.1mm X 5.5mm US Plug https://www.amazon.com/dp/B073WSWT34/ref=cm_sw_r_cp_api_i_2BPB0MSCJFPZ6PR16DHG?_encoding=UTF8&psc=1
Yeah, I’ve got some like this but can’t find any of the male to male type yet.
Evaty 810 to 510 Drip Tip Adapter Connector Universal Converter Heat Sink Extension Accessories 5 Pack (Black) https://www.amazon.com/dp/B082621DLM/ref=cm_sw_r_cp_api_i_SAX6Z8MZRN3WY3MZRW3V?psc=1
You can get 12v power bank from amazon that take 3x18650 batteries
Each set of 3 batteries will allow you to charge back up to full charge, but not enough amps to do passthrough.
>Hydration pack? What's that and please point me in the right direction.
They're two-way humidity control so they add or remove moisture to keep your herb at the perfect humidity. The two brands I usually see are Boveda and Boost. You want to look for 62% RH for cannabis (the other RHs work better for things like tobacco, etc.). Here's an example on Amazon: https://www.amazon.com/dp/B06XB26Q8N?ref\_=cm\_sw\_r\_cp\_ud\_dp\_ABNHAP557KKFG3BKBF2W
I've used this with my C+ for at least 35 hours. Also using with my S10e and laptop (YogaBook). No issues at all so far, and definitely really helpful with my Crafty+ specifically since it has the worst battery life out of everything I own lol.
I use these screens.
200 PCS 5/8 Pipe Screens, 100%... https://www.amazon.com/dp/B07W9493YJ?ref=ppx_pop_mob_ap_share
They are just a little big which I like.
Bend the screen over your pinky so that it looks like a contact lens, and push it into the mouthpiece the same way you’d put a contact lens on your eye.
Then push down on the center (which will be sticking up like a bubble) and the screen will invert so that the edges lock into the edge of the mouthpiece.
Same thing with the chamber piece. It’s okay if it’s not a perfect fit or if a little screen is sticking out, just push it against the chamber.
The screen is not Ops main issue here, his mouthpiece is GUNKED UP on the inside to the point that he’s not getting much draw. There’s probably a wall of resin and plant matter blocking most of his air flow.
I use [this]https://www.amazon.co.uk/dp/B09PN8BBR9/ref=cm_sw_r_cp_api_i_MK0MYCBYE9GGZQFG2XRH) cable. It's suitable for 100w, so you've got plenty of headroom for the mighty as it can only pull 45w. Also, you will need a power brick rated to 45w; I suggest buying an Anker because they are a reputable brand.
The best way is to get bulk screens like this https://www.amazon.com/gp/product/B07W9493YJ/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 for only 6 bucks, and put them on top of the herb in the oven. No screen in the cooling unit. Works great, minimal AVB gets into the cooling unit and it's the same effect as a capsule.
USB C Charger, Spigen 70W Dual USB C Wall Charger [GaN II], 60W for Single Port, Type C PD Power Adapter Fast Charging for MacBook Pro MacBook Air iPad USB-C Laptop Dell XPS 13 iPhone 13 Galaxy Pixel https://www.amazon.com/dp/B08PS5B2H8/ref=cm_sw_r_apan_i_29SC0KJSM8SY87XJ1GGD?_encoding=UTF8&psc=1. I use this, it can fast charge from both ports
You can use a whip the same diameter as the volcano one and it’ll fit the mouth piece air tight. You can also fit it in most down stems or adapters. Here’s the one I get on Amazon https://www.amazon.com/dp/B08L7XWH82?ref=ppx_pop_mob_ap_share
You mean these?
Gebildet 200pcs Stainless Steel Pipe Filters, 15mm/0.59 Inch Smoking Screens Pipe, Silver Mesh Screens Gauzes Filter with Storage Box https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_cp_api_i_V2F9VBS6PA9D0K1SS7RB
https://www.amazon.com/gp/product/B07D8S6KX5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 This is all you need. On top of the bud in the oven and you're set
Get a box of these and you'll be set for life:
Gebildet 200pcs Stainless Steel Pipe Filters, 15mm/0.59 Inch Smoking Screens Pipe, Silver Mesh Screens Gauzes Filter with Storage Box https://www.amazon.com/dp/B07WTSG5ZK/ref=cm_sw_r_apan_i_R9JHA4ZFJTXEWHFXQDEC?_encoding=UTF8&psc=1
If it's a USB output (and not USB C PD) than it is 5 V and that won't work. You need a power bank like this one: https://www.amazon.com/TalentCell-Rechargeable-3000mAh-Lithium-External/dp/B01M7Z9Z1N and you need to use the 12v barrel socket, not the USB output.
USB C is a whole different thing but that only helps if you have the Mighty+.
Cali Crusher Combo Pouch (8in x 5in) | Cushioned Protective Padding | 100% Smell Proof w/Combination Lock | Side Release Buckle Strap (Olive Green) https://www.amazon.com/dp/B08TB8F1F7/ref=cm_sw_r_cp_api_i_HX395P5ZVKV011EGSW18?_encoding=UTF8&psc=1
This soft bag is lockable and smell proof. I didn’t want a hard case as the mighty is not delicate and does not need Pelican case like security. Pelicans are great, but for me, they are too bulky and heavy for traveling purposes
A Water Pipe Adapter, stepped meaning it goes from 10mm at the top, 14mm in the middle and 18mm nearer the base that clicks into the Crafty/Mighty, I'll link one up. WPA adapter
CLEAR UV - ULTRAVIOLET 99.5% FROM £7.99 - PROTECTION PRO WINDOW TINTING FILM - Sample https://www.amazon.co.uk/dp/B00L51647G/ref=cm_sw_r_cp_api_i_8KEQR1VYMXN1Q6YVVRJX
Unfortunately it’s out of stock but I’m sure you can find some from another seller
I use these https://www.amazon.co.uk/value-Screens-Stainless-Smoking-Filters/dp/B08RNSSM71/ref=mp_s_a_1_14?crid=JCYVXUCWZQNQ&keywords=200+pipe+screens&qid=1647878487&sprefix=200+pipe+screens%2Caps%2C63&sr=8-14
I like this bag from Herb and Mary. Plenty of space for extras and it’s nice looking.
Smell Proof Bag by HERB & MARY - Accessories Storage Stash Case with Integrated Combination Lock - Medium https://www.amazon.ca/dp/B096G77ZMW/ref=cm_sw_r_cp_api_glt_i_DP6YB40PAD5P83KCFR83?_encoding=UTF8&psc=1
3 in 1 WPA for Mighty/Crafty - 18mm 14mm & 10mm Adaptor for Mighty & Crafty - Glass Adaptor Mouthpiece Vaporizer Accessories for Mighty (3 in 1 Mighty/Crafty Adaptor) https://www.amazon.co.uk/dp/B0953FN98K/ref=cm_sw_r_apan_glt_i_W04GEFYX6GN3CBKXZK7P
Have a look at this, it might be what you're after if I've understood you correctly. Crafty/Mighty Stepped WPA - 10, 14, 18mm
No problem. I got it on Amazon. Quality is good but it took a couple of weeks to deliver coming straight from China.
Metalwork Brass Hose Barb Y Manifold Fitting, Y-shaped 3 Way Tee, 3/16" Hose ID, 5mm Barb x 5mm Barb x 5mm Barb (Pack of 2) https://www.amazon.com/dp/B07DFMZMN8/ref=cm_sw_r_apan_glt_i_XA9X5ABSG9J19Q7JH498?_encoding=UTF8&psc=1
I have this one and can't fault it: https://www.amazon.co.uk/UGREEN-Shockproof-External-Protective-Portable/dp/B072HJ4FTX/ref=sxts_rp_s1_0?cv_ct_cx=Ugreen&keywords=Ugreen&pd_rd_i=B072HJ4FTX&pd_rd_r=c6274460-d6e5-4766-b6e9-5bf8420b6050&pd_rd_w=CsMKA&pd_rd_wg=x7A0M...
Duronic Hard Drive Case HDC2 /BK | Black | Portable EVA Storage Pouch for External Hardrive and Cables | Lightweight Protective | Suitable for WE/Western, Toshiba, Buffalo, Hitachi, Seagate, Samsung https://www.amazon.co.uk/dp/B0037PSQD8/ref=cm_sw_r_apan_glt_i_SC4MGVW4QMTX97K9NVJ0?_encoding=UTF8&psc=1
I got the smaller version of this one in 2010 and I'm very happy with it. The larger one is currently in stock but the smaller one is often out of stock. If you mail them they'll give you a heads up when they come back in.
Supremery Case for Storz & Bickel Mighty Evaporator Case Protective Case Carry Bag https://www.amazon.de/dp/B07HXXXRZ1/ref=cm_sw_r_apan_glt_i_Z9H73398Q8HKES866859?_encoding=UTF8&psc=1
That should be perfect man, mine is a great fit. Nice to have that extra protection. Have you saw those Vape Cases? They’re good but too big to carry aroundMightyVapeCasehttps://www.amazon.co.uk/dp/B00U0XK1YM/ref=cm_sw_r_cp_api_glt_i_07247JTKKKPMPPB5RX7A
For anyone else interested in or needing a case thus is what I've just ordered. I'll let you all know when it arrives tomorrow.
Deal: Duronic Hard Drive Case HDC2 /BK | Black | Portable EVA Storage Pouch for External Hardrive and Cables | Lightweight Protective | Suitable for WE/Western, Toshiba, Buffalo, Hitachi, Seagate, Samsung https://www.amazon.co.uk/dp/B0037PSQD8/ref=cm_sw_r_apan_glt_i_dl_6AQTJQSHZ00RCG7S59AQ?_encoding=UTF8&psc=1
I just found it on amazon. So good to have it in bulk, so much more economical.
Isopropyl Alcohol 5L Pure 100% - Isopropanol IPA Cleaner/Rubbing Alcohol 5 Litre https://www.amazon.com.au/dp/B07K1TLNP6/ref=cm_sw_r_apan_glt_i_SV4MX530J49Z4DCFTTZG
There’s one on the S&B site. I use this one though, has been good- long cable, high quality and compact.
Feelers 9mm ID x 12mm OD High-Strength Silicone Tubing Thick Food Grade High Temp Pure Silicon Tube High Temp Home Brewing Winemaking Silicone Hose Tubing, 9.84ft Length https://www.amazon.com/dp/B08L7XWH82/ref=cm_sw_r_cp_api_glt_i_BVFFV9ERVF9RMPANPSCF?_encoding=UTF8&psc=1
Those are the best dimensions for the volcano, can probably get a smaller or bigger size but depends more on the bong downstem than the cu mouth piece.
Either leave it with the rattle, or open it up and take the piece of plastic out. Its actually quite easy to open and while you are there you can clean out the inside.
You need a T6 screwdriver and there are two screws under the sticker with the serial number on it. Then push around and some clips will unclip. T6 is $3 on Amazon: https://www.amazon.com/dp/B00YGINKEK?psc=1&ref=ppx\_yo2\_dt\_b\_product\_details
I wanted to make sure I got one long enough to reach from under my desk for pass through sessions.
You can also get iso from Amazon au and it's cheaper.
Isopropyl Alcohol 100% IPA Isopropanol, 4L https://www.amazon.com.au/dp/B09DK25PDZ/ref=cm_sw_r_apan_glt_i_3A81Y1VQ7CFZV71KHHJX?_encoding=UTF8&psc=1
I hate advertising for Bezos, but this is the tubing I bought. 5/16" ID Silicon Tubing, JoyTube Food Grade Silicon Tubing 5/16" ID x 7/16" OD 50 Feet High Temp Pure Silicone Hose Tube for Home Brewing Winemaking https://www.amazon.com/dp/B07T8SBX3Y/ref=cm_sw_r_cp_apip_s1Mt3jgKq3IiL.
I cut about an 18” piece, slide it snugly over the CU, stick the other end in an elbow piece, and go to town.
HOWEVER, it’s important to start hitting the bong right before you put the elbow piece in the bong and remove it while you’re still clearing it. Not doing so will end up blowing air into the cooling unit. Won’t break the mighty or anything, but over time it contributes to the insides getting gummed up.
One of these
Ultra Clear Platinum Silicone Tubing - Food & Medical Grade - High Temp Hose (3 Feet, 3/16" ID x 5/16" OD) https://www.amazon.com/dp/B082RJ2687/ref=cm_sw_r_cp_api_glt_i_A7891A3K49WZVK7C5B12?_encoding=UTF8&psc=1
This will work. Currently out of stock on Amazon but try an electronics big box (best buy) or Walmart\target
Blind SPOT - USB to 12V Adapter - 12 Volt DC Power Cable - Use Any PD USBC Power Bank to Power Any 12V Device - Turn Your Power Bank into a 12 Volt Battery https://www.amazon.com/dp/B08CCX5S96/ref=cm_sw_r_apan_glt_i_4CJZHHQ637GG8C4F3QN6?_encoding=UTF8&psc=1
I forgot to mention that I had replaced the original coarser screen with one of the fine ones! Still having this issue though. I ordered these for replacements: https://smile.amazon.com/gp/product/B07WTSG5ZK/ref=ppx\_yo\_dt\_b\_asin\_title\_o03\_s00?ie=UTF8&psc=1
Use a 1/2 inch screen in the dosing cap. No screen in the CU.
The screen in the CU was always getting covered with resin. I’d wipe it with the brush. I wiped it with tissue that had no lint. Neither kept it from getting gummed up and replacing the screen every week, or so. It didn’t need replacement because it liquifies and becomes more vapor but that’s not the point.
A few weeks ago I bought 1/2” screens to put in the top of each capsule. After packing the weed, too with the screen and put in the capsule lid. The screen gets discolored from the heat but not filled with resin. It’s as dry as the weed and ready to be loaded in the next cap. You can clean in ISO, if you need.
These are the screens I bought: 1/2 Inch 200PCS Brass Pipe Screens Filters - 60 Mesh Stainless Steel Filters with Metal Box (1/2 Inch) https://www.amazon.com/dp/B08GK62JQC/
After each session, look in the CU while it’s still hot. If there is debris, you can wipe out with a tissue and it doesn’t build up. Make sure you don’t leave lint (soft Kleenex is the worst. Cheap, single ply toilet paper is better. It won’t leave lint like Kleenex).
I can go a couple weeks without wanting to clean the CU now. It’s great.
I’ve tried screens between the screen and the capsule (those get gummed up too). I’ve put raw cotton in the CU to replace the screen (don’t risk cotton with all the pesticides used). Nothing has been effective for me as the fine screen in the caps.
Good luck. Hope you find a solutions that works for you.
1/4 Inch Food Grade High Temperature Silicone Rubber Tubing ID 6mm OD 9mm https://www.amazon.com/dp/B06W51VZ43/ref=cm_sw_r_apan_glt_i_Y85YHXZTWJCT574GKNWP?_encoding=UTF8&psc=1
Bought this and it works great
This is the one I use and I love it. It charges my mighty plus fully in about an hour and 15 min and supports pass through for when you need it also affordable
this is a very good one, you also get a 60W PD charger and USB C cable.
Anker PowerCore+ 26800 PD 45W Powerbank met 60W PD
This is the amazon listing!
Not sure how many dosing caps the capsule holds because I only have the one that ships with the Mighty+ (more on the way), but I'd guess you could at least fit 4 or 5 in it
I got these, they came with a little tin which I use to store some of the little bits like O rings etc
This seems like it would work. Bigger then the one op posted
FYY Electronic Organizer, Travel Cable Organizer Bag Pouch Electronic Accessories Carry Case Portable Waterproof Double Layers All-in-One Storage Bag for Cable, Cord, Charger, Phone, Earphone Black https://www.amazon.ca/dp/B09LLSC61K/ref=cm_sw_r_apan_glt_i_B5RCVEFHPE0QAMXRHVYB?_encoding=UTF8&psc=1
UGREEN Cable Organiser Bag, Small... https://www.amazon.co.uk/dp/B07DQBC6NH?ref=ppx_pop_mob_ap_share
This is a decent mighty carrier/storage. You can fit the device, the charger, a round of caps, cleaning brush, accessories etc. You can play around with the arrangement.
Hope this helps anyone!
Sorry for the long link. 😅
These are the ones in the US. 15mm is the correct size. You can use them in the CU, oven and the capsules.
FIREDOG Odor Proof Bags, Smell Proof Pouch Carbon Lined Travel Stash Storage Smellproof Bags (Black,Small 5”x3”) https://www.amazon.co.uk/dp/B088T36Y9P/ref=cm_sw_r_apan_glt_i_RGGKG2FHEE68WZ5MZ7PW?_encoding=UTF8&psc=1
I got the one fit's perfectly and snug
I don’t use the caps, and my mighty still looks great. My screens do get sticky/gunky around particular parts of the rim after about a 1-1.5g. I clean my mighty at least once a week, and it all goes back to looking like new again.
Take it apart, let it all soak in a small glass Pyrex bowl in iso for about 3-5 mins while I swirl the parts all around. Don’t leave it in too long, it’s not necessary. Iso works fast! Then, I take a qtip dipped in iso, and clean off whatever is left. All comes off with ease. I then rinse it all under warm water, then lay it all out on a paper towel in front of a fan.
For the oven, I heat it up to about 190°c, take a qtip dipped in iso, and clean around the oven rim/actual oven. Make sure not to use too much iso inside the oven. You don’t want anything dripping into your device. All in all, it should take about 20 minutes or less to disassemble and reassemble (drying with fan, then using a paper towel to dry the nooks and crannies).
Super easy/quick to keep it clean once you’ve made it a habit! ;) Plus the hits just stay clean and smooooooth.
**just a little tip: I like to use the end of a placker (end of any kind of floss-pick) to help me remove screens/the bands when I disassemble. These in the 15mm size are perfect for the mighty.
Thank you very much!
Is this the correct wpa pls?
Was thinking of a globe too ?
Glass Globe Bong Bubbler - Mini Portable Bong - Female 14mm Joint Bong - Water Piece for Vaporiser & More (Mini Globe & Glass Mouthpiece) https://www.amazon.co.uk/dp/B096G4Y4MW/ref=cm_sw_r_apan_glt_fabc_W1AR3CWJB7C00D72ATXQ
here you go, it's sound as, no pop ups, permissions or anything. I don't even think it connects to the WiFi, just Bluetooth. And the bits that are the same as the Storz app, like the battery and uptime hours seem the same. And it connects instantly you've just seen the tem battery info. The home screen with the temp dial and heat graph is cool. Touch the dial to get all the info and then slide up. It'll change the timeout to 30 mins as well on basic temp, but not on boost modes.
Hose, 3/16 x 5/16 https://www.amazon.com/gp/product/B082RK1BRD/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1