Oh no! If you bought your Huion pen tablet through Amazon you might want to try and contact Amazon's Customer Service and ask if they will help you get a replacement pen. If that doesn't work you can try to use Huion's warranty, but I hear they just tell you to buy a new pen.
Reddit Post Someone Tries to Use Huion Warrinty
​
The only other options is buying a new pen.
US Amazon has a listing for $12.00USD
Triple Monitor Mount I had this monitor mount back when I had the Huion GT-220. The other arm and middle mount carried 25” monitors. It was great cause I could pull the huion closer and lower to me if I needed to draw and it could be angled to my preference. When I was done, just push it back up and it was a third monitor again!
Its right on the website.https://www.amazon.com/HUION-Graphics-Full-Laminated-Battery-Free-Adjustable/dp/B08BZ897B4Product Dimensions21.5 x 12.72 x 1.05 inchesItem Weight15.32 pounds
You can try to use monitor calibration software like Calibrize (http://www.calibrize.com/)to try and get monitor and tablet to sync up better. It didn’t really do the job for me but you might be able to figure it out.
There are free alternatives like Krita or Sketchbook.
But if you will ever go for a paid software I would strongly recommend that you check out Affinity (https://affinity.serif.com/en-us/designer/). I have all of their software and it is amazing. They are the strongest competitor to Adobe stuff at fraction of the price (pay once, keep forever). Around black friday they will probably have a sale (probably 50% off).
Amazon Basics Premium Single Monitor Stand - Lift Engine Arm Mount, Aluminum - Silver https://www.amazon.co.uk/dp/B07QNY2G4T/ref=cm_sw_r_cp_api_glt_fabc_9Y2QGGGPBWVHWB4HNNV4?_encoding=UTF8&psc=1. This is a good one
After I bought the Nimaso USB-C Cable and found out that it doesn't fit I was quite annoyed that Huion designed the port that way. I sanded the plug down and it fits & works, if you're careful the aluminum stays intact.
Now I wait until someone finds a cable with a fitting plug that's angled at 90°, and if such a cable exists I will replace mine.
Wanted to post in this thread, but it's archived.
Yeah thats definitely hdmi and should fit into an hdmi port. Nevertheless maybe just try getting an hdmi to usb 3.0 adapter on amazon. That way it just plugs right into a usb port instead and you can use the hdmi port for a monitor or something else. Ill link the one i have but you can find them literally anywhere just make sure its setup like this: https://www.amazon.com/dp/B0811LTJ1H?ref=ppx_pop_mob_ap_share
I mean it looks like you're selling yours for more than a brand new one off amazon currently.. .
https://www.amazon.com/Drawing-Monitor-Display-Full-Laminated-Battery-Free/dp/B07RP1V2K5/ref=sr_1_5?crid=2M2QUP6HX0JYX&dchild=1&keywords=huion+kamvas+pro+16&qid=1609561904&sprefix=huion%2Caps%2C219&sr=8-5
I don't claim to be an expert, but that looks about right! Just going off what I learnt via google when I encountered this problem. This is the adapter I am currently using with my Huion Kamvas 16 2021: https://www.amazon.com.au/dp/B00S0C7QO8/ref=cm_sw_r_cp_apa_fabc_OMx4FbWPNPMBK?_encoding=UTF8&psc=1
I got the kamvas 13, very cheap https://www.amazon.com/-/es/gp/product/B083TZKSL8/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
​
my gf that never draw before (illustration) manage to do a great job (helping me) with some small painting :)
and like the last comment, yes check the specs, i have a wacom 12wx and i tried to install that huion but i couldnt
The Artisul stand actually feels really stable and works way better than the one that the kamvas 13 comes with, but its gonna cost additional to get it, here it is on amazon
I'm planning to get this one off of Amazon
https://www.amazon.com/gp/product/B0B2QBRGD7/ref=ox_sc_act_title_1?smid=A30FF1YSS5LSJQ&psc=1
until i found out it's not by Huion despite looking perfectly similar to it, I thought it comes with nibs though, atleast one
It says it takes PN02 nibs, but would the PN03 spare nibs I have already work on it? They seem to have a similar design peg save the length of the tip, apart from color
The leaf is taped to the tablet and haven't changed a nib in some months, but I'm using the grip pen (KP-501E) because I like it more than the Pro Pen 2.
Also happens that the Pro Pen 2 (the pen which comes with the tablet) has more pressure levels, 8192 (compared to the 2048 of the grip pen), but to achieve the 100% pressure you have to press much harder than with the grip pen.
I wanted to tell you that with the Intuos Pro M (PTH-660) you can use the pens from the intuos 4, 5 and Pro (1st generation), and one thing to metnion is that those pens had a wider variety of nibs, take a look here:
https://www.amazon.es/gp/product/B00280092Y/ref=ox_sc_saved_image_7?smid=A1AT7YVPFBWXBL&psc=1
If you don't mind having a smoother surface to draw, in one of my tablets I put some kind of plastic taped to the tablet's surface, and with that plastic I haven't had to change a nib so far. The plastic I used is relatively thick but foldable (not hard plastic); and with the plastic or with the paper, the touch function still works (although I usually have it off).
You can get some of those clothes like you use for glasses at Walmart (you may have even got one with your tablet) and wipe it every so often. You can also look into these graphic artist gloves which covers your hand. Below is just a link to Amazon but you can find them just about anywhere.
It's not hard to find a power cable online. Google the model and "power cable" then find one that looks right and ships to you for a reasonable cost and speed. Here's a link I pulled up in about 10 seconds. Make sure to evaluate it yourself before purchasing! https://www.amazon.com/Accessory-USA-Adapter-Tracing-Artcraft/dp/B0776T7JFJ
no i mean, if you lets say order a kamvas from this
https://www.amazon.de/-/en/Kamvas-22-Graphics-Anti-Glare-Connects/dp/B08CH76D44?th=1
is he the legit reseller , bcs theres a lot of them below him in the search tab, so idk who to trust on this exactly
I did, I just ordered this one from Amazon, plus some replacement felt nibs to test them out:
https://www.amazon.de/-/en/Kamvas-22-Graphics-Anti-Glare-Connects/dp/B08CH76D44?th=1
im thinking of this one , it seems legit for now, althought what do i know i never used amazon : ( i just hope their refund policy is strong af
known issue, kamvas tablets get really hot around the upper corner on the side where the cable goes in, dont bother with it, or buy a little phone cooler if it bothers you that much.
the tablet is a screen, it heats up like any computer monitor, and huion with its amazing design didnt make a few holes to help the tablet get some fresh air
Here is an amazon link
Hello! Based on your experiences, what do you think about this one? https://www.amazon.co.jp/-/en/gp/product/B09PRCZX49/ref=ox_sc_act_title_1?smid=A2O26QE483XADB&psc=1
I am thinking of buying that one but not 100% sure. The reviews on several blogs look nice but some of my friends recommended to stay with the more known brands like Wacom or Huion. Any thoughts or advise would be very helpful :)
A bit of an odd question if you still happen to stop here. Is the Artist 24 you're referencing the same QHD model as the one that's out now? . So hard to tell which version is which with these companies.
I would suggest trying to find a bag for a laptop instead of a tablet! I use this one . It holds my laptop and my graphics tablet in it, but its exactly 16 inches, which might be too small.
Here is a 17 inch laptop sleeve from amazon
Hope this helped!
There is not one as far as I know, and the etched glass is still too slippery. This made the trick for me. Get some felt nibs https://www.amazon.com/HUION-Upgraded-Replacement-Compatible-Drawing/dp/B099RV4JSM
Try google about the thunderbolt and any adapter in need.
Or, try using the huion 3-1 cable instead of 1-1 usb-c cable.
https://www.amazon.ca/HUION-Kamvas-Drawing-Tablet-Screen-CB06/dp/B08DFDTNSJw\_wcB
I use these:
https://smile.amazon.com/gp/product/B07Z7ZM8CJ/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&psc=1
They are cheap and go low enough that I sometimes accidentally bang my desk with the bottom of the monitor. I've been pretty happy with them.
I don't think you should – you might get dust under the glass. Maybe use some dust cleaning gell /putty.
I got one of these without doing any research first (my bad) and ran into this thread. I HAPPENED to have a USBc ond hand that fit and works.
This is taken directly from the Huion Amazon ca store
"KAMVAS Pro 12 is compatible with Windows 7 or later, Mac OS 10.12 or later and ChromeOS 88 or later"
I know I'm late to the party, but I wanted to pitch these. Put the tablet into the folder and it should be protected from scratches and the glassy feeling will be greatly reduced. I was always reluctant to press too hard on mine because of the fear that I would scratch the screen. Now it's way more enjoyable to just let loose with your pen.
I found a fix on Reddit digging a while back. Cheap fix with Amazon.
12v/2A power supply with a 3.5mmx1.5mm plug like this one:
https://www.amazon.com/DTECH-Adapter-Supply-1-35mm-Charger/dp/B082XWGGKJ
Use electric tape to make sure it stays plugged into the three-way Huion cord since doesn't have the lock Huion's OEM brick does
I'm glad the newest models did away with this crap
Peace.
I found a fix on Reddit digging a while back. Cheap fix with Amazon.
12v/2A power supply with a 3.5mmx1.5mm plug like this one:
https://www.amazon.com/DTECH-Adapter-Supply-1-35mm-Charger/dp/B082XWGGKJ
Use electric tape to make sure it stays plugged into the three-way Huion cord since doesn't have the lock Huion's OEM brick does
I'm glad the newest models did away with this crap
Peace.
I found a fix on Reddit digging a while back. Cheap fix with Amazon.
12v/2A power supply with a 3.5mmx1.5mm plug like this one:
https://www.amazon.com/DTECH-Adapter-Supply-1-35mm-Charger/dp/B082XWGGKJ
Use electric tape to make sure it stays plugged into the three-way Huion cord since doesn't have the lock Huion's OEM brick does
I'm glad the newest models did away with this crap
Peace.
I found a fix on Reddit digging a while back. Cheap fix with Amazon.
12v/2A power supply with a 3.5mmx1.5mm plug like this one:
https://www.amazon.com/DTECH-Adapter-Supply-1-35mm-Charger/dp/B082XWGGKJ
Use electric tape to make sure it stays plugged into the three-way Huion cord since doesn't have the lock Huion's OEM brick does
I'm glad the newest models did away with this crap
Peace.
I went through each of those options, and I noticed that the DISDIM USB C Extension, 6ft, usb 3.1 gen 2, 10gbps connected through the USB-C Extender was the cheapest option and has a reach of 6ft, while the Huion cable has only 3ft of length. I am thinking about ordering these, but I am worried that they will not work as well as the Huion cable would, which I have also never tried.
I have the 22 plus and the Amazon basics flex arm works great with it. As long as the 24 has a compatible mount holes you should be good. Even though the arm is Amazon basics it is a copy of the ergotron lx arm that costs more. The metal stamp on part of it even says it is licensed from an ergotron patent.
You can consider the huion's keydial which is specifically for the thing you want.
Something like this could be a good cable. I was gonna get one this Friday and try it with Nvidia 2070 Super. I'm just wondering about the size of the plug. Might need to sand it down.
90 Degree USB C to USB C Cable, Right Angle 100W PD USB C 3.2 Cable 20Gbps Data Transfer, 4K Video Output with E-Marker for Thunderbolt 3/4, MacBook Pro, iPad Pro, Galaxy S20, Pixel, Switch (5 Feet) https://www.amazon.com/dp/B099K2LQNT/ref=cm_sw_r_apan_i_VWARMTBNTNF5ZBK6CM7H?_encoding=UTF8&psc=1
Here's a 5v2a power adapter with multiple adapter heads, one of which would fit the kamvas 16s female end.
I bought this one and just used wire tape to make sure the plug stays in the socket on the Huion cord because I had two of their shoddy and overpriced OEM power supplies die within like a year:
https://www.amazon.com/gp/product/B00Y7MGZLA/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
Drawing Tablet with Screen-XPPen Artist12 2nd Computer Graphics Tablet with Battery-Free X3 Stylus, Full-Laminated Digital Art Tablet Compatible with Chromebook Mac Windows Android Linux(11.6" Black) https://www.amazon.com/dp/B09H738G1D/ref=cm_sw_r_cp_api_i_YKGQ0Q6D9CT08DR66Z9N
They do make felt tips for PW517: Amazon Canada link.
Thanks for the clearly answer, so do you suggest a Dock for me? I use Lenevo Legion5 https://www.amazon.com/Lenovo-1920x1080-Processor-Windows-82B1000AUS/dp/B08BB9RWXD
but i don't know my laptop it's woking for Dock...
No worries. I bought one from my local hardware store, but this is what I was talking about. It's to create threads into the holes in the adapter.
Get the 16! (2021 edition) It has an $83 dollar coupon right now on Amazon if you get the blue back ( black back has $43 coupon )
2021 HUION KAMVAS 16 Graphics Drawing Tablet with Full-Laminated Screen Anti-Glare 10 Express Keys Android Support Battery-Free Stylus 8192 Pen Pressure Tilt 15.6 Inch (Blue) https://www.amazon.com/dp/B08M5N5C5B/ref=cm_sw_r_cp_api_glt_i_DEH2W8CYBXER95QFA5NV?psc=1
Ohhh that makes more sense.
I think the electronics on the kamvas are a bit so so, because I noticed the Usb-C cable (not the 3 in 1, but the USB C to USB C they sell separately) is sensitive to orientation. USB C is supposed to work whatever way it's turned, but with the kamvas only one was good and i had to mark the cable to know which side is up.
I'm so sorry your dock got damaged. At least it's replaceable. You can use your pc monitor with an HDMI switch to switch between the console and the pc (like HDMI Switch,GANA 3 Port 4K HDMI Switch 3x1 Switch Splitter with Pigtail Cable Supports Full HD 4K 1080P 3D Player https://www.amazon.com/dp/B06VX1PKQ7/ref=cm_sw_r_apan_glt_i_Q9HVWM7A57YM6HDS2GDY?_encoding=UTF8&psc=1 not saying this one will work, but probably), or a USB capture card on your PC and OBS to capture the signal from the switch.
I would probably go for the 24 for the resolution. I feel that such a big tablet like the 20 would sorta be a waste of space.
Size aside, I prefer the specs of the new 2020 16 Pro at 2.5K. It has the high resolution, but being of the newest tablets, it also includes the better screen. If size isn't a huge concern, I would suggest giving it a look.
We're having problems too. On sale at Amazon now. Just bought one. Limited-time deal: HUION H610 Pro V2 Graphic Drawing Tablet Chromebook and Android Supported Pen Tablet Tilt Function Battery-Free Stylus 8192 Pen Pressure with 8 Express Keys https://smile.amazon.com/dp/B07DPC98DT/ref=cm_sw_r_apan_glt_i_dl_VFE21R5CG04B6DYPMXEM
HUANUO Laptop Monitor Mount Stand with Keyboard Tray, Adjustable Notebook Desk Mount with Clamp and Grommet Mounting Base for 13 to 27 Inch LCD Computer Screens Up to 22lbs, Notebook up to 17” https://www.amazon.com/dp/B07DWM9WNM/ref=cm_sw_r_cp_api_glt_fabc_BDCS6MTX7EPYC07YWX7B
This is what I got for my laptop and other monitor. I had to reinforce the table with a piece of 2*4 since the linmmon is not hardwood and. I dont have a picture of my setup rn since I am on a work trip out of the state but once I come back I can send you a picture. 👍🏾
Each strip is rated to hold 5lbs each. I trust them to hold a 2.7lb tablet.
Plus the 3M Command Strips can be pulled out without damaging anything unlike other double sided tapes. So you could always try this and just remove it if you don't like it. Was $10 for the Vivo adapter and the Command Strips were $3.
But yea I do wish they had holes pre installed.
My friend, there isn't a Huion on the market for 20$.
If you meant to add a zero, I'd suggest a Huion Kamvas 12. It's about 208$ after a coupon, and if it's anything like the 13 I own, it'll be a great tablet.
You do have to download drivers, but there aren't any viruses whatsoever if you get them from the Huion website.
I could be wrong, but I think the only smaller tablets on the market currently that have standard vesa support are the wacom cintiq 16/pro; however there are vesa adapters you could use to mount a tablet without the backplate attachment.
Just make sure the one you purchase can fit the tablet you plan on buying(the particular one I linked fits monitors between 13 and 27 inches).
Hi there, Kev!
Thank you for the reply! I don’t have a preference on how I get the tablet to connect to my Imac, just as long as it works.
To answer your question on how I connect the tablet to my Imac, I use a Lention USB C hub with a HDMI, 3 USB 3.0, and a SD 3.0 card reader. I’ll link the adapter.
I plugged in the HDMI cable and the USB cable into the Lention port. The port is then connected into the USB 3 on the back of my Imac.
I’m not tech-savvy at all. So, I don’t have a good understanding of the different ports and cables. I apologize if I make any errors or don’t know something.
Hi Swimming Baby,
nice to meet you.
I am not sure but check this one out, it says it will fit a 16 inch screen, you will know better than me. Hope this helps you.
https://www.amazon.com/Adapter-Bracket-Samsung-Monitors-100x100/dp/B06X9C7XDD
Merry Christmas
Cheers Kev
Hi dovahkiissmepls,
nice to meet you,
This is the best I can find around for such a large display like the KAMVAS 20. Which is 19"x12"x2" without the stand on. So you might have to just unscrew the stand while storing it, but that's not to bad is it. There is larger, but once you go over a certain size the price goes ways up for anything of quality.
According to my calcs, this backpack will fit yr Kamvas with a couple of inches to spare. This one is a 22"x14"x9" backpack I found on Amazon and its received a 4+ star rating for $135 US. This is the best quality and price I can find at the moment, although I came across some in China, but this is in the US so thats handy and from the details it looks well made, lots of handy pockets and rectangle enough to slide the display in to.
www.amazon.ca/Extreme-22-Inch-Backpack-Lightweight-Compact/dp/B01NBWQPOK
This may not be yr end result but at least it gets you started in the right direction.
Merry Christmas
Cheers Kev
Hi dovahkiissmepls,
nice to meet you,
This is the best I can find around for such a large display like the KAMVAS
20. Which is 19"x12"x2" without the stand on.
So you might have to just unscrew the stand while storing it, but that's not to bad is it. There
is larger, but once you go over a certain size the price goes ways up
for anything of quality.
According to my calcs, this backpack will fit yr Kamvas with a couple of inches
to spare. This one is a 22"x14"x9" backpack I found on Amazon and its
received a 4+ star rating for $135 US.
This is the best quality and price I can find at the moment, although I came across some in China,
but this is in the US so thats handy and from the details it looks well made, lots of handy pockets and rectangle enough to slide the display in
to.www.amazon.ca/Extreme-22-Inch-Backpack-Lightweight-Compact/dp/B01NBWQPOK
This may not be yr end result but at least it gets you started in the right direction.
Merry Christmas
Cheers Kev
P.S.
I did try to post the photo of it but every time I do that, all my text
I typed disappears and I don't know why yet, although I suspect you
can't insert a photo in to a Text Post.
It acts like a second monitor, so you should be able to drag images onto the tablet if you set it up that way.
The stand is a bit too low for my taste (can only set to a low angle), so I bought a separate stand: https://www.amazon.com/gp/product/B07VD5F83T/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1 and I was able to get it at a better angle.
Pen accuracy is ok -- could be better, but doesn't personally bother me too much as I like to use it without screen on sometimes. Depending on how you sit and view the screen, it's definitely less accurate on the edges of the screen (harder to hit small icons on the side of the screen without looking at the mouse cursor).
Curious: are you using the felt nibs by any chance or the regular ones? I was going to order the felt ones but disregarded after reading the warning on Amazon: https://www.amazon.com/dp/B099RV4JSM/ref=cm\_sw\_em\_r\_mt\_dp\_KKMHW7H28KQ1CJDG6M53
I just got mine a week ago and it doesn't get all that warm. With your back problems, I will suggest that you mount it up on a monitor arm. That's what I did and it is worth every penny.
The monitor is quite heavy and large, so being able to move, tilt and rotate it around in 3d space, without filling up your entire desk, makes everything more comfortable.
Here's the American version of the mount I got
https://www.amazon.com/AmazonBasics-Premium-Single-Monitor-Stand/dp/B00MIBN16O
One thing to note. You computer needs a newer GPU to run it smoothly, at least my Nvidia GTX 1050 isn't powerful enough to run the thing without pen lag.
https://support.microsoft.com/en-us/help/4028443/windows-update-drivers-in-windows-10
A lot of suggestion here too, maybe one of them will work for you
App is http://www.expresii.com/ you can see its watermark briefly in the bottom right corner of the Kamvas screen.
I'm guessing this isn't strictly a feature of Expresii, but probably something native to the Kamvas 22 Plus.
I had the same problem. Huion support helped me and I was able to solve it. I am sending the link with the necessary files and the procedure to perform. If it does not work, plug the desk into a USB 3.0 port. With me was how it worked. I hope it helps
I had the same problem. Huion support helped me and I was able to solve it. I am sending the link with the necessary files and the procedure to perform. If it does not work, plug the desk into a USB 3.0 port. With me was how it worked. I hope it helps
I had the same problem. Huion support helped me and I was able to solve it. I am sending the link with the necessary files and the procedure to perform. If it does not work, plug the desk into a USB 3.0 port. With me was how it worked. I hope it helps
You can get one of those VESA mount bracket here
The listing I used it's currently out of stock, but almost 100% sure this the same adaptor I bought with another companies logo stamped on it
https://www.amazon.com/Rankie-DisplayPort-Adapter-Resolution-Converter/dp/B010SDZZ80
Really cheap ones are gonna be cheap in quality too so be careful with that. I used a "Parblo" branded stand for my old XP-Pen Artist 15.6 Pro (I'm guessing the 2 tables are similar in size) and I loved it. It's super sturdy and cheaper than the Huion stand (which I hated). Only negative thing about it is that there are only 4 positions, but for me it worked really well.
I've been hounding Huion since August. They might've blocked me by now. I have no clue.
Your other option is to find a spare on eBay from a compatible model but most sellers don't sell only the pen, they sell the pen with the monitor and all its accessories.
For example, this seller has two pens still... I don't know if you message them if they'll sell you the extra pen separately. https://www.ebay.com/itm/Huion-GT190-19-inch-Digital-Pen-Drawing-Graphics-Tablet-Black-/185053557041?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
If you have the money and time to experiment, you could check if a different old pen like a PE330 will work or not. There's one Amazon review claiming it works for a 190 but I have no idea if it's true or a typo mistake. LICHIFIT PE330 Rechargeable Digital Pen Stylus for HUION GT-191/GT-156HD 8192 Graphics Drawing Tablet Monitor https://smile.amazon.com/dp/B081YT5CZL/ref=cm_sw_r_apan_glt_fabc_31Y29M78HKSD3Q64FZDP
See if this works:
Drawing Tablet Sleeve Protective Bag for Wacom Cintiq Pro 16/Cintiq 16/ Intuos Pro PTH860 Large, for Huion Kamvas Pro 16, Wacom Carrying Sleeve Case(Black) https://www.amazon.com/dp/B08HQ629Z7/ref=cm_sw_r_cp_api_glt_fabc_4AMEZBVARVXDQKT684YW?_encoding=UTF8&psc=1
It might not be recieving enough juice. You could try a different VGA to HDMI and HDMI cord in case something was damaged during the move?
https://www.amazon.com/Gold-Plated-Compatible-Projector-Chromebook-Raspberry/dp/B075GZ8DX7/
https://www.amazon.com/Monoprice-HDMI-High-Speed-Cable/dp/B002NUQATU/
It's most likely the Digital Stylus Pen PE330. Like another comment said, if you identify your drawing tablet model, you can probably then find the pen in the drawing tablet's website.
Thanks for the replies!
I'm looking now for an usb3.0 to Hdmi external video card. I found this cheap one [link](https://www.amazon.com/StarTech-com-USB-HDMI-Adapter-External/dp/B00H91BQ7Y but it doesn't look like the others that are way more expensive... link
I'm trying to connect the huion tablet with this external video card and my external monitor by the entrance of the hdmi port of my laptop (asus rog g531 gt)
I did some digging, and I'd recommend looking at youtube videos on how exactly these work
​
But this honestly may work for you. Tech's come a long way since i last looked at PCIE cards, but I would heavily look at reviews and videos of them functioning first. The fact that this one classifies as a "Thunderbolt" card, and also has a DP Port has me optimistic im just a dinosaur
could always try something like this https://www.amazon.com/Adapter-Bracket-Samsung-Monitors-100x100/dp/B06X9C7XDD/ref=pd_lpo_2?pd_rd_i=B06X9C7XDD&psc=1
can't tell you if it would work or not. since i only have a 22 plus
Because you are saying simultaneously that the colors of the tablet are inaccurate while also saying that you do not have access to a calibration device and also not having a calibrated main display. Every other person that has had "color issues" has also been proved with the exact same situation: never having used a color calibrated device.
You know you can switch the color tone of the tablet in the OSD to a cooler tone, right?
Do you even know your tablet has an OSD?
Here is a small tutorial on how to access the color temperature setting in a Kamvas 22. Be warned that these color profiles are also calibrated by temperature and not just set to "blueish values". By norm, the temperature standards are 4500k, 6300k and 9600k, the "warmer" color palette being 4500k. Some manufacturers like LG in it's entry lineup of IPS displays don't even reach the 6300k temperature values in it's warmer setting (6300k being neutral white).
Your color calibration settings "should" match the tone of the space you are working on, but just neutralizing it to 6300k is correct unless your lighting is extremely blue or redshish.
If you do color critical work, you should always have either all devices calibrated or a colorimeter. Price isn't really an excuse when you own a Kamvas 22. The SpyderCube is only 54 bucks.
Please, do not spread misinformation calling a faulty device on user ignorance issue.
I would do more research to ensure this will be compatible, but I found this on Amazon with 2-day prime shipping. The shipping may be different for you, but worth a shot.
The Kamvas 22 has screw holes on the back (Normally for the stand it comes with) but these screw holes are also VERSA mount compatible.
I purchased this spider arm wall mount: https://www.amazon.com/gp/product/B0779BHZCG/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Already had a drill and stud finder, so all I had to do was find the beam in my wall and decide how high I wanted it. Drilled into the 2x4 and screwed it in. Was surprisingly easy, took maybe 30 minutes total to get it up.
So i have huion 950p i work as a 3d artist, use my own tablet for work and own stuff everyday i take my tablet to my office and from office to work i needed a solution to lessen the dismantling of cable as it would break early. So i taught of getting a magnetic cable
Something like this https://www.amazon.com/Magnetic-Charging-Terasako-Compatible-Smartphone/dp/B07RHVNFQ6
Idk how the cable gonna effect the tablet or is it worth it
I recommended this triple monitor mount to another redditor looking for one. I had this one on my GT220 and it was great! Able to swivel and move around to my needs. I could bring it up to act as a second monitor and bring it down and towards me as well as tilt it when I needed to draw. I believe they make single and double mounts if triple is too much
I have the H610, which I bought in 2013. The drivers suck, made worse by being on macOS which I imagine gets less attention from Huion than Windows 10. I've reinstalled drivers, restarted, tried anything I can think over, on repeat, and nothing works right; so I gave up and ordered the XP-Pen Deco 01 V2 Drawing Tablet with overnight shipping just to try it. I think the H610 is just super-old tech, relatively speaking, so I'm hoping the newer stuff is more sensitive and doesn't require as much pressure (which is causing strain on my wrist; trying to learn to use the pen properly but the H610 makes that hard).
I say all that to say getting a new (perhaps used) tablet is probably your only solution. H610 is old. Unless you mean the H610 Pro V2 which is newer, but still modeled after the much older H610.
Sorry, i'm not sure if i follow what you're saying, since my understanding of these hardware stuff is very limited. There are only USB ports on the computer, so i am using an USB to HDMI adpater to connect with the HDMI cable on the tablet. Is this what you asked? does it mean that the adapter is not working?
I am using an USB to HDMI port, like the one on this image and Amazon link. I originally bought it from a brazillian shop, so it's the closest to the product i could find
yeah I know that problem.. ^^;
at the moment i've got a 27" on the left, 27" in the middle, and my 22" Kamvas at the right..
I wish there would be a substitute to the expensive Wacom stand for 500 bugs. that thing allows you to pull down the tablet on you lab, and you have the other Displays behind them fully visible
another idea would be to put the tablet (+ display) on a display arm and move them arround to your needs
I bought https://www.amazon.com/dp/B07M6K4VNR/ref=cm_sw_r_cp_apa_glc_fabc_M9XE6JVK08CDN8DM12KS?_encoding=UTF8&psc=1 on amazon, it worked but after an hour or so my kamvas 13 would start to flicker, I guess from overheating. I bought huions own cable and I dont have that issue anymore. Wish it was longer.
Did the USB C cable you buy happen to support DisplayPort?
If it does, then you could get one of these to help make it fit into the pen display https://www.amazon.com/dp/B07MBWH7QG
If the cable doesn't support DisplayPort, then you need to buy a USB C cable that does, otherwise you won't get a video signal when you manage to connect it all up.
Also your computer's USB C port needs to support DisplayPort too or be ThunderBolt 3.
Yes [Here](USB C 3.1 Gen 2 Cable 10Gbps Data Transfer 6.6ft,4K UHD USB C Cable 100W PD Fast Charging Cable Thunderbolt 3 Compatible with Oculus Quest, MacBook Pro, iPad Pro, Galaxy S20, Google Pixel. https://www.amazon.com/dp/B089FV4Z2P/ref=cm_sw_r_cp_apa_i_MJTHKF9Z772RBHZS8TZ5?_encoding=UTF8&psc=1] is the Cable
Any USB C cable you choose needs to be display capable such as Thunderbolt 3 rated USB C ones. You can use this adapter available from amazon if the plug is too big https://www.amazon.com/dp/B07MBWH7QG
Get something similar to this: Monitor Adapter Mount Kit | Non-VESA PC Screen Mounting | 20” to 27” Screens | LED, LCD Computer Screen Bracket Adapter Kit | Supports 10KG | Pukkr https://www.amazon.co.uk/dp/B07BWH66BN/ref=cm_sw_r_cp_api_fabc_uUB8FbKW0EEA4?_encoding=UTF8&psc=1 And then get a Vesa arm
Yeah, that looks like a Passive adapter, which is probably the issue. This should work.
A better solution would be to check if there are any other video ports on the laptop, such as Display Port or Mini HDMI. Transferring a Digital to Digital signal wouldn't require additional power.
I would make sure whatever cable you buy specifically says it supports video, but beyond that I don’t know if there’s anything else you need to look for.
I bought this one for my new Kamvas 22 Plus and it’s working fine so far, though you have to connect it to the Huion 3-in-1 cable in a specific orientation (the extension cable comes with a card telling you this).
none of the pen displays listed as a kamvas pro 16 will be the pen display you're looking for, as the kamvas 16 2021 is not part of the pro series. all of the kamvas pro 16's listed on the site should be the 2019 version, i don't think there's a later version of the pro 16. i actually can't find the 2021 model on amazon UK, even though it's currently available on amazon US.
the site seems to be in the same situation that the amazon US site was a week or two ago, where the kamvas 12 2021 was available on the site, but not the kamvas 16 2021. something that's worth a shot is asking them when they'll release the 2021 model on amazon UK through their storefront page (click the button that says "ask a question"). when i did that, i got a response from them within a day saying that they were planning to add it to the amazon US store that week.
another option is to order it through amazon US, if you're willing to figure out how to order things from a different country's amazon. the ASIN for it on amazon US is B08LYLJH66 (the page is here). my pen display seems to be shipping directly from china to the US, which makes it seem like they don't have any stock in other countries currently, so that might mean the shipping route wouldn't be much different from ordering it from the UK website. granted, that's just my speculation.
i wish you luck in getting your hands on this pen display!
Would something like this work? (sorry if the link doesnt work)
Check this one out. Look at YouTube reviews too. Make sure it’s the 2020 edition
HUION 2020 Kamvas 13 Graphic Drawing Monitor 2-in-1 Pen Display & Drawing Tablet Screen Full-Laminated Tilt Function Battery-Free Stylus, 8192 Pen Pressure and 8 Shortcut Keys, Purple https://www.amazon.com/dp/B083V1GZ9Z/ref=cm_sw_r_cp_api_glc_fabc_7Ef0FbAHR31Z8
> And it's especially annoying because you have to use their usb-c cable or it just won't fit in the slot.
Not sure if you were aware, but there are adapters available that let you plug any 3rd party compatible USB C cables into your Kamvas 13 https://www.amazon.com/dp/B07MBWH7QG But yeah, they could've designed it from the outset where you didn't have to.
https://www.amazon.com/HUION-Kamvas-Battery-Free-Sensitivity-Stand-13-3inch/dp/B087R2PWGW?th=1 that has a 52$ cupon so little under, same with the purple there are likely other listings that have coupons, got the 22 inch for 90$ off a few days ago as a christmas present, and saw the 13 at 210 at the time, so this is likely ending soon.
it mainly connects via 3-in-1 cable (usb-c to hdmi/usb(data/pwr)/optional extra power).
so your imac needs to have hdmi and usb 3.0. your specific imac 2014 lacks HDMI port but has thunderbolt (mini displayport). you can buy an adapter: thunderbolt to HDMI. then you can use the included cable to connect.
No, however that one is also good. Here's the one I was talking about
It comes in two colors as well.