https://www.amazon.com/gp/product/B07T7TSG4L/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
​
this bad boy. Really sturdy and plenty of room for adjustment.
https://www.amazon.nl/gp/product/B00FE690DI/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 is this monitor, is nice because it transfer video and power through usb
Theyre Huanou dual monitor gas spring mounts! Here's a link. https://smile.amazon.com/dp/B07T5SY43L/ref=cm_sw_r_cp_apa_fabc_BB0SXAB09BKE2F743XWG?_encoding=UTF8&psc=1
The built in cable management on them is awesome as well and they're awesome for the price range. Have no issues holding my screens.
I haven’t had any issues with it over heating at all. I’m using a 16 inch base model MacBook Pro and it’s connected to the CalDigit TS3+ hub (which is supposed to be pretty fast, Apple sells it), it dishes out 87W charging and has 15 ports. Its expensive, but I would recommend it.
Pair of 24" Acer R240HY (link below). Had them for about 2 years now. Only complaint is that there's no Vesa mount, it just rests on top of this double pronged thingy and doesn't lock into place. Was able to find a Vesa backplate adapter to mount them on the arms but they still just sit on top of it, so wouldn't trust it to turn them vertical.
Vesa adapter: https://www.amazon.com/gp/product/B07XPJ5CF6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Look into DisplayPort monitors that do MST or daisy chaining, and an MST compatible KVM (switching box). I use one of these, https://cpc.farnell.com/aten-technology/cs782dp-at/2-port-usb-displayport-kvm-switch/dp/CS32360?CMP=TREML007-003. I have a 1920*1080 portrait and a 2560*1440 landscape monitor, so in essence, 3 out of a maximum 4K the KVM can handle.
I have one display cable from two machines going into the KVM, my landscape monitor then passed through that signal to the portrait monitor. The KVM has a remote switch, so you don't have the cable mess on your desk.
You could probably place a couple of these on either side of your monitor (3-tier cube).
https://www.amazon.com/Furinno-5-Cube-Reversible-Shelf-11069WH/dp/B074NH61RV
Get an ipad air or pro on a stand. Put it on the right side. Then you can use Universal Control all the way from the ipad to the Mac mini to the macbook (air or pro).
String some lights between the bookshelves. Get a fake succulent or two.
And a cat.
And a chair.
And you're all set.
I have the Fully Jarvis dual monitor mount and a single monitor mount (3 monitors total) and I love them. I also attached a less expensive brand that had good ratings when I was doing research if you want to check it out
Thanks! Got it on Amazon EppieBasic LED Desk Lamp,Architect Clamp Desk Lamps for Home Office,24W Brightest Led Workbench Office Lighting-6 Color Modes and Stepless Dimming Modern Desk Lamp for Monitor Studio Reading https://www.amazon.com/dp/B08C5HG5CS/ref=cm_sw_r_cp_api_glt_fabc_9D2N570SKAABSBCAXATE?_encoding=UTF8&psc=1
I am also having a macbook 2011 somewhere stored in the back. I don't miss it.
It depends on what makes you productive as. Linux gives you the power to make your environment whatever you like to. I suggest to check out r/unixporn. People are showing how it can be tweaked and they show some cool apps. And there are a lot of look & feel of mac os.
As a software engi I don't feel the need to go back to mac, since I can have everything what I need on Linux aswell. I'm just curious how darling will work at the end. So I might occasionally use PSequel instead of dbeaver :)
try an inexpensive arm from Amazon just 30 USD to replace that stack of books
That would be the:
Surface Pro Stand, iPad Pro 12.9 Stand, Inifispce Multi-Angle Adjustable Tablet Stand Holder for 4.7''- 13'' Screen Microsoft Surface Pro Series, iPad Pro 11 / 12.9, iPad, Mini, Air and More (Black) https://www.amazon.com/dp/B08XW4GY5Z/ref=cm_sw_r_cp_api_glt_fabc_31HBK44533Y0CPK4ABVW?_encoding=UTF8&psc=1
I run my work laptop and gaming PC using the same monitor and peripherals. I simply switch the monitor input for the appropriate machine. For peripherals, I have this USB 3.0 switch to connect both machines. FWIW, peripherals are dongles connected to wireless keyboard and mouse and a USB DAC AMP.
UGREEN USB 3.0 Switch Selector 4 Port 2 Computers Peripheral Switcher Adapter Hub for PC Printer Scanner Mouse Keyboard with One Button Switch and 2 Pack USB Male Cable https://www.amazon.com/dp/B01N6GD9JO/ref=cm_sw_r_cp_api_glt_fabc_TX5Q3SAHSJ97WNAE7FTR?_encoding=UTF8&psc=1
Limited-time deal: ErGear 17-32" Dual Monitor Stand Mount, Heavy-Duty Fully Adjustable Desk Clamp Arms for Computer Screens, Loads up to 17.6lbs per arm w/Swivel and Tilt, 75/100mm VESA, Black - EGCM1 https://www.amazon.com/dp/B082MLVXRR/ref=cm_sw_r_cp_api_glc_fabc_dlT3_NAm6FbQ6PQCS9
It's just a pretty cheap one from Amazon. I think it's the one I linked below. I do like it, I've just changed the bulb to one I like better.
Anti-fatigue standing mat: https://www.amazon.com/gp/product/B00V3TO9EK/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
The sound bar has decent sound for the price. The sound is clear and has decent base. I use my Razer headset when I want better sound though.
This is the laptop stand. It is great!
https://www.amazon.com/VIVO-Single-Laptop-Notebook-Mount/dp/B00CM9NG1W
Thanks, I’m quite happy with it. Had it about 3 months now and it’s holding up well, hasn’t really frayed, which is what I was worried about. Link here:
https://www.amazon.com/dp/B07N3SVZCT/ref=cm_sw_r_cp_api_i_Ix5cFbWA7H3F0
From Amazon, Dahle Vantage 10673 Self-Healing Cutting Mat, 24"x36", 1/2" Grid, 5 Layers for Max Healing, Perfect for Crafts & Sewing, Black https://www.amazon.com/dp/B0027RN0JW/ref=cm_sw_r_cp_api_i_S4BoFb7JFSGYE
A super cheap DSLR mic from Amazon Important to note I did NOT get it for studio quality anything, only for the fact that it was an unpowered 3.5mm super cardioid/shotgun pattern mic that I could use for phone calls and Teams meetings without getting problematic feedback or echo from the soundbar placed below it.
The audio quality is notably better than the one that's built in to the webcam.
EDIT: Keyboard is a Kinesis Advantage Pro 1st gen that I got second hand and modified to use a pseudo-Maltron layout I customized for my own ease of use. I installed a USB battery pack with LED power readout inside the case, and wired it to power the Pi and screen (folded down under the pi right now so you can't see it). It's a Pi 3 B with wireless, so I can use it on the go. Just plug in the power and kb USB pigtails. The mouse is wireless connected to a USB hub built into the keyboard. I also added some rifle sling mounts to the top corners so I can lug it on my back.
That shouldn't be a problem, but if you're worried it won't have enough weight to balance the gas spring (even at its weakest adjustment) then this one will work fine - https://www.amazon.com/dp/B07XBC646Q/ref=cm_sw_r_sms_apa_i_ZnoCEb09ETWZX
The bigger issue might be finding a VESA-mountable dock for that size - measure the width of the laptop in portrait mode, and make sure whatever clamp you find can be adjusted to that. Mine, in the Amazon list link, just barely shrinks to fit my 15.6" Envy (10" width). Might be a good idea to look for a VESA adapter made for tablets or iPads if your laptop is smaller
I can definitely take some later. The biggest hurdle is probably finding a VESA-mountable clamp that holds your laptop. I'm using one against its intended purpose - It was designed to hold a laptop horizontally, by the keyboard deck. I was worried about the stability until I installed it, but it's actually rock solid, and easy to dock/undock. https://www.amazon.com/dp/B06WW8NVTK/ref=cm_sw_r_sms_apa_i_t8txEbZGQYMB0
After that, the cables run inside the monitor arm ($25, "Mountio" from Amazon, can not recommend highly enough. The gas spring system and built in cable management at that price is insane). I ran USB-C and power to the laptop. The USB-C goes to a dock with extra USB ports and an HDMI output, which runs to the monitor (AOC 27G2 - 27", 144Hz, IPS, the value at $210 is, again, insane). 3.5mm audio cord runs back down the arm from the monitor's audio out, and over to the speakers.
So plug in that one USB-C, and everything connects! I did run a separate cord for power to my laptop, but if yours charges over USB-C then you can really do it all with just one cable!
Having audio out on the monitor makes things much easier, btw. Ran into that problem with the first monitor I tried, but very glad I upgraded.
Only other caveat is I haven't gotten FreeSync to work over USB-C, but I can unplug the HDMI Out from the dock and pop it directly into the laptop for that luxury
MAGIPEA Tablet Stand Holder, Mount Holder Clip with Grip Flexible Long Arm Gooseneck Compatible with ipad iPhone/Nintendo Switch/Samsung Galaxy Tabs/Amazon Kindle Fire HD - Black https://www.amazon.com/dp/B07PT3T8TV/ref=cm_sw_r_cp_api_i_ns8jEb43SVYVD