What are /r/Corvette's favorite Products & Services?

From 3.5 billion Reddit comments

The headers will definitely make it louder, add a few HP too. Real power is gained from a cam and tune with headers, exhaust intake etc. The tune is the most important part.

The Vitesse throttle controller is also a great way to wake up the lazy throttle response. The car has an e throttle pedal, its not a direct to the throttle body by wire, its all electronic. The throttle controller increases the throttle blade response in relation to how much throttle you give the car. It's pretty cool. I may even have one for sale soon, keep up with me.

The plastidip is a very cheap and easy way to try black wheels. Just go with about 5 coats per wheel and start light, allow the proper dry time and do multiple coats or it will not adhere. Prior to plastidip, wash the wheels very very well with a non greasy solvent or the dip will peel instantly upon drying. Again, multiple light coats until the wheels are properly covered and then you can add thicker coats. IT si pretty good at self leveling so it will look nice and flat black. You might want to do the halo and the rear spoiler.

If you have faded black plastics, there is a great restorer available on Amazon that I used on my 2012 GS Vette, it is fucking amazing the difference is makes and is quite permanent.

https://www.amazon.com/gp/product/B01B9ZICOK/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

I used a half OZ on my H2 and the GS and both look great after several storms and washes.

Feel free to PM me with any questions, Ive owned two Vettes and am soon to buy a C7Z so I know my way around these cars pretty well.

Here is an amazon link. Same one I bought for my C5.

I don’t have anything as industrial as your storage but I have one of these (https://www.amazon.com/dp/B08QV2DVRM/ref=cm_sw_r_cp_api_glt_fabc_97H4Y407HVJEP5KSJ520?_encoding=UTF8&psc=1) that fits just behind and between the seats and matches my exterior color scheme perfectly. Lots of storage in reach without sacrificing all that hatch space.

Link to .ai file

..

Link to .eps file

One of those is the Vector file... just don't know which.

I use this and really like it, bro.

https://www.amazon.com/gp/product/B07GB7298K/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I leave the base plugged into the 12V port in the center console and the detached portion plugged into the aux port by the CD changer. Then I run a 1.5' braided USB charging cable from the center console to my phone which is magnetically attached to a ProClip holder to the right of the center console/AC controls.

Yes. I literally just fixed mine on the nose about a month ago. There are two different ones. The nose has tabs where as the back does not. I got mine from amazon, but it wasn't $105 when I ordered it. It was around $60. They seem to fluctuate a lot. GM Genuine 19207384 Bumper Fascia Emblem, Front https://www.amazon.com/dp/B00GU8D1ZM/ref=cm_sw_r_cp_apa_i_Jp6fDbDD96V1Y

This for example.

Keep it stock, except for this: If you like music, this is worth doing.

It's an FM modulator that goes inline on the antenna wire. You get to keep your factory radio for that stock look but still get bluetooth audio from your phone.

It is indeed, go get yourself 4, still available: https://www.amazon.com/TSW-NURBURGRING-18x9-0-120-65-GUNMETAL/dp/B00849GKOO/ref=sr_1_1?keywords=tsw+5+120.65&qid=1670269543&sprefix=%2Caps%2C556&sr=8-1&ufe=app_do%3Aamzn1.fos.f5122f16-c3e8-4386-bf32-63e904010ad0

So I'm sure these are on your radar, but if not here they are...

https://www.amazon.com/gp/product/B0894BKW3D/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1

Seen these? https://www.amazon.com/gp/product/B085S1YGDQ/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1

I use these.

https://www.amazon.com/gp/product/B082TYHMSG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

If you're interested in USB ports instead, I replaced the lighters in my C6 with these: https://www.amazon.com/gp/product/B01HPSYBKE/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I remember I had to shave the plastic a little to fit.

I picked it up from Amazon. Looks like its out of stock now. https://smile.amazon.com/gp/product/B07BX5FW54/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1

Fitment was actually surprisingly good!

The c7 headlights look great, but as what normally happens when you pull the front bumper, those corners by your headlights are sticking up.

No worries. Very common. Just a couple broken body panel tabs. Like a 15 minute fix. Here's a link for replacements. https://www.amazon.com/dp/B0040CTUZ0/ref=cm_sw_r_awdo_VQY2MEXBF1P08NTC04QT?psc=1

And a video tutorial https://youtu.be/BNO7guqiSAU

Beautiful car, and don't forget to wave!

Looks like the corners of your front bumper by your headlights are popped up. No worries, common issue, the plastic retainer clips probably just broke. Here's where you can get some more. 10 minute fix. https://www.amazon.com/dp/B0040CTUZ0/ref=cm_sw_r_awdo_M8Y0KJXPFN8FWZ02Z75K?psc=1

Seconding the Covercraft, they’re the same ones licensed by WCC and they’re perfectly fitted, great quality. Made to order so takes a week or two to ship. No complaints from me!

https://www.amazon.com/dp/B000PLUPP4/ref=cm_sw_r_cp_api_i_XP18BYN6S27SW6MVXMPX?_encoding=UTF8&psc=1

I ordered this https://www.amazon.com/240T-Fabric-A1-Minivan-Reflector-Blocking/dp/B07HZ22VTX in a medium. Works perfectly and cost me 15 bucks. I couldnt justify spending 70-100 on something that blocks the sun.

If you're looking for cheap, I got something like this one. I'm not sure exactly what size they are but the two rectangle things work just fine.

So here’s the specific kit. (I’m trying to source it from Amazon as I have a big credit there)

here’s a similar kit (couldn’t find the exact one on their website. shouldn’t matter for the rear parking brake.

“AERO4 Big Brake rear axle kits replace the factory disc brakes and use the OE parking brake assembly”

Ok cool. It reuses factory OE parking brake. Got it.

“**This kit is NOT compatible with vehicles equipped with an all-electronic (E.g. - No cables, even at the axle.) OEM parking brake.“

Ok so it reuses it only if it’s not all electrical. i.e. electrically actuated, mechanically operated?

In the figment category transmission is blank. So it’s not specific to an auto. It leads me to believe that some years of the c7 have a fully electric parking brake and some years are just actuated electrically and that electric motor pulls a cable in the axle or whatever and it’s fine for those models?

Just curious if anyone knew if brake was fully electric or just electrically actuated.

I find this super useful on wheels, especially ones with hard to reach spots. throw the soap on the rim then use the water brush to clean and rinse

Brush Hero Wheel Brush - Auto Cleaning Kit Water, Powered Rim Cleaner to Scrub and Wash Tires, Grills, Bike and Motorcycle Wheels, Car Detailing Spinning Brushes https://www.amazon.com/dp/B00Z7N7KGW/

https://www.amazon.com/TAKAVU-Detailing-Bristle-Multipurpose-Motorcycles/dp/B071VRJRKK/ref=mp_s_a_1_2_sspa?crid=ZAEW9LVGBDXH&keywords=takavu+wheel+brush&qid=1651287755&sprefix=takavu+wheel+brush%2Caps%2C351&sr=8-2-spons&psc=1&a... Just have to be careful the reviews say the little rubber end pops off sometimes. It came with a replacement.

Yes, my kid uses this one when riding with me: Diono Cambria 2 XL, Dual Latch Connectors, 2-in-1 Belt Positioning Booster Seat, High-Back to Backless Booster with Space and Room to Grow, 8 Years 1 Booster Seat, Black https://www.amazon.com/dp/B07QSCL3HR/ref=cm_sw_r_cp_api_i_3MN2AX4ZGC20TVVP932R?_encoding=UTF8&psc=1

Are you saying I shouldn't use this fluid? I saw a lot of people on forums recommended it.

ACDelco GM Original Equipment 10-4033 75W-90 Manual Transmission and Transfer Case Fluid - 1 qt https://www.amazon.com/dp/B007Q108YY/ref=cm_sw_r_apan_i_KH217TRYFCFD5TEPV7B9?_encoding=UTF8&psc=1

I HIGHLY recommend Wizard's products, especially the metal polish/protectant. Use regularly on my Corsa tips and it keeps them looking like yours do now. 😎

WIZARDS – Metal Renew Show Polish – Liquid Detailing Polish for All Metals - Cleaner, Shine & Protects Automotive Metals (8 oz.) https://www.amazon.com/dp/B005ECVRWO/ref=cm_sw_r_apan_glt_i_JDE62272NCSR9CPRCB6E?_encoding=UTF8&psc=1

NATIKA Backup/Front View Camera White - IP69K Waterproof Great Night Vision HD and Super Wide Angle Metal OEM Style White Reverse Rear View Backup Camera for Cars Pickup Trucks SUVs RVs Vans (White) https://www.amazon.com/dp/B07QBMNVVB

Here you go fam!

Real Red Carbon Fiber Engine Push to Start Button Trim Cover With Light Hole Compatible With Chevrolet Corvette C7 2014 2015 2016 2017 2018 2019 (Incl https://www.amazon.com/dp/B093J2CDQQ/ref=cm_sw_r_cp_apip_AdqoNRfpIQ91K

https://www.amazon.com/Diecast-Car-Trailer-Corvette-Motormax/dp/B09M91BKPH/ref=sr_1_1?crid=JNYLJMK7FCD1&keywords=diecast+c6+corvette+models&qid=1644428314&sprefix=die+cast+c6+corvette+models%2Caps%2C133&sr=8-1

To get a proper gloss, you really need to buy a straight up gloss can that has a bladder you need to pop otherwise youre wasting your time. https://www.amazon.com/Eastwood-14148Z-Spray-Paint/dp/B0743FCN5L/ref=sr_1_58?keywords=gloss+spray+paint&qid=1642628621&sprefix=gloss+spray%2Caps%2C98&sr=8-58

Something like that. When it comes to painting its paint, sand, paint, sand, paint and then the gloss is where you dont sand anymore. Typically two coats of gloss is enough. IF you sand the gloss, you basically are going to restart the process entirely.

Remember, the sanding/painting process is all about trying to keep the paint on the same "level" so you arent seeing highs and lows, which is overspray or simply too little paint due to oversanding, which happens. Gloss wont hide these issues and instead bring more attention to them, the gloss is the finish and only the finish all the fixing is the painting part.

With how bad the paint is overall, I would say just take it to maaco and get a $500 paintjob unless youre going to paint it all around yourself.

Only thing I can think of is to obtain an actual print copy of the Kelley Blue Book from 1993 and look up the car in there. Getting a KBB from a more recent year might yield different results.

Found one in a library in Cali. Good luck man.

http://www.worldcat.org/title/kelley-blue-book-july-december-1993-used-car-guide/oclc/29896148

Just bought this one for my C5. Works perfect!

Anker Roav Bluetooth Car Adapter and Car Charger, Power IQ 3.0 Type C PD, Bluetooth FM Transmitter for Car, Wireless Calling with Bluetooth 5.0, Noise Cancellation -T2 https://www.amazon.com/dp/B0813L778N/ref=cm_sw_r_awdo_navT_g_BT2EEHW436AE4JPZBYR1

Nulaxy Wireless In-Car Bluetooth FM Transmitter Radio Adapter Car Kit W 1.44 Inch Display Supports TF/SD Card and USB Car Charger for All Smartphones Audio Players https://www.amazon.com/dp/B018E0I01I/ref=cm_sw_r_cp_api_glt_fabc_26HBWCTDVQ7YAX7TT6QE

here your speakers won’t have any bass unless that is also wired in correctly. comes with instructions, goodluck!

This stuff, I love it. https://www.amazon.com/gp/product/B00IK66KK0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

The book All Corvettes Are Red by James Schefter has some incredible stories about testing Corvettes in blizzard conditions. It's a great book that I regret giving to the new owner of my C5 as I wrack my brain for details of the relevant stories. Those were some brave test drivers indeed.

This thing rocks: JOYTUTUS Car Cup Holder Adapter Compatible with Corvette C51997-2004/2005-2013 Corvette C6/2014-2019 C7 Automotive Dual Cup Holders Expander Insert Travel Buddy

https://smile.amazon.com/dp/B07DNN2P2V/ref=cm_sw_r_awdo_navT_a_0ZKQWBVCBB22N181NQ6H

Took me some searching, but I found it! (Bought this 2 years ago 😁). It was this bad boy:

Arkon VSM Adapter Kit for iPhone X 8 7 6S Plus iPhone 8 7 6S with Drill Base for Car Installation Retail Black https://www.amazon.com/dp/B00SZHIEVC/ref=cm_sw_r_apan_glt_fabc_9828384P3HRD22KR9VJQ?_encoding=UTF8&psc=1

It attaches to the ProClip mount with 4 tiny screws. I still have my old Galaxy 9 (with slim case) that fits fine, but bigger phones may not work.

Oh nice, what base do you have attached to the part that snaps to the dash? I just have that piece from ProClip that snaps in and then I stuck a magnetic mount to it, but there isn't much room for my phone to sit horizontally with the magnetic mount.

[Newest] VANMASS Magnetic Phone Mount for Car, [Never Fall Off] Super Strong Magnets Car Mount Dashboard Phone Holder for Dash Windshield Air Vent, Compatible with iPhone Samsung & All Phones https://www.amazon.com/dp/B09534MBS6/ref=cm_sw_r_apan_glc_fabc_5E02K7TDCTJMCZ0GRGSK

Can't find exact one but I found this one and this one

I guess this says it all

In saying that I did once order from them as I have a card here. I can't recall what it was, but it must have been hassle free. After reading the reviews, I won't risk ordering from there again

And good on you for not letting them get away with what amounts to theft

Thanks! that's the car that I saw.

I also came across this link: https://roadtrippers.com/stories/never-before-seen-pictures-of-the-corvette-you-never-knew-existed

Sweet! That's one of the body styles that I also like.

I don't really like the C4, C5, and C6 bodies.

This is mine, that's older than yours:
https://pic8.co/a/7641950c-0483-4ea9-b5e8-0bb0a302d9fc/

Same here! Oh, and I use Wizard's Metal Renew Polish every month or so. Stuff is freakin' awesome! Actually keeps my Corsa tips cleaner longer. 😎

WIZARDS - Metal Renew Polish, Shines, Cleans, and Protects All Metals (8 oz.) https://www.amazon.com/dp/B005ECVRWO/ref=cm_sw_r_apan_glt_fabc_BDB2K29B5C53XCGW06CG?_encoding=UTF8&psc=1

For anyone that cares here is the seats link: https://www.amazon.com/Racing-Leather-Bucket-Sliders-Warehouse/dp/B088TGY28K/ref=mp_s_a_1_4?dchild=1&keywords=c5%2Bracing%2Bseats&qid=1633834828&sr=8-4&th=1&psc=1

On a brake related note...anyone know if Power Stop rotors & pads are good quality? Looking to upgrade my stock units and these are pretty affordable on Amazon. 🤔

Power Stop K1563-26 Rear Z26 Carbon Fiber Brake Pads with Drilled & Slotted Brake Rotors Kit https://www.amazon.com/dp/B00B0C101U/ref=cm_sw_r_apan_glt_fabc_W0EC70Y9Q8SQB3GZWTX8?_encoding=UTF8&psc=1

(This is the rear kit only)

Idk what size you need but measure it and order one of these https://www.amazon.com/Straight-Silicone-Coupler-4-Ply-Reinforced/dp/B01M0OC3NC/ref=sr_1_5?dchild=1&keywords=4+inch+silicone+coupler&qid=1633724797&s=automotive&sr=1-5

Believe it or not, Amazon has these at a really reasonable price right now. They have all the C6/C7 replicas at some of the best prices I've seen on any site. 😎

OE Wheels LLC 19 Inch Fits Chevy Corvette 05-2013 C7 Z06 Style CV22B 19x10/18x8.5 Rims Satin Black Hollander 5734 SET https://www.amazon.com/dp/B01MQPK8TX/ref=cm_sw_r_apan_glt_fabc_1Q946B65R7QE7QWX4P59

Amazon purchased adjustable bar stools. I removed the upholstered part of the chair and the bracket is a pretty close fit to the wheel center. Industrial mounting tape and the connection is plenty strong but can still be scrapped off if necessary. I was originally using it just for mock-up but it was do strong that i went with it.

The tire sits higher than the rim so the glass touches only the rubber. Search round glass table tops and chose whatever size you want.

Homall Bar Stools Modern PU Leather Adjustable Sw... https://www.amazon.com/dp/B017VQBCL6/ref=cm_sw_r_sms_api_glt_fabc_CXCX4ABPYH4WZYM8P12S?_encoding=UTF8&psc=1

I'd have to say just do the cargo net. It looks like if you unattach it, the targa top should still lock in. Not 100% sure on that however.

https://www.amazon.com/dp/B08JHDVXQ5/ref=cm_sw_r_cp_apa_glt_fabc_ZK6N50NP6DXT7XXJNJ58

I picked up this three-section cargo net from Amazon and have been thrilled with it. Attaches to the privacy cover points on the front and there are some hooks near the bumper side of the trunk for the other two. Only thing that's bothersome is anything hooked can and will grab the netting (e.g. backpack straps), but it's great for groceries and such while still fitting the targa and privacy covers.

You need one with a 3/8"-16 thread.

I made my own starting with a 90mm long delrin Tomei shift knob: https://www.amazon.com/Tomei-Shift-Knob-Long-90mm/dp/B0017TDKXW/ref=sr_1_1?crid=3JP2GGKFUCC12&dchild=1&keywords=tomei+shift+knob&qid=1624667794&sprefix=Tomei%2Caps%2C221&sr=8-1

Then drilled it out and pressed in a threaded insert from Mcmaster-Carr: https://www.mcmaster.com/97191A270/

The original tool is basically this https://www.amazon.com/1984-1996-Corvette-Panel-Ratchet-Wrench/dp/B00I2Y2YRS

The difference between an original one and the one in the amazon link is that it says on/off at the switch on an original one. Here's mine for reference. https://i.imgur.com/aDRHJuC.jpg

If he's using an allen key, the only gift that would make sense is buying that amazon tool, the Corvette has a little slot it fits perfectly in to in the center console. You could buy him an electric screw driver but he will still need to use the allen key to make sure the top is on tightly enough and to loosen it up initially since a regular screw driver wont have enough torque to do the job in one go.

Chemical Guys Watermelon Snow Foam Cleanser, 64 oz, 1/2 Gal https://www.amazon.com/dp/B07NY3PDYQ/ref=cm_sw_r_cp_api_glt_fabc_D4CSQ6CJZS1G8R5W9YKY?psc=1 I use watermelon snow foam from chemical guys. Just need a little bit of it diluted with water. Goes a long way.

Yeah I think a big point is to avoid scratching your paint. It attached to a power washer with a quick connect. Tool Daily Foam Cannon with 1/4... https://www.amazon.com/dp/B07HC898GM?ref=ppx_pop_mob_ap_share

Yours looks like it works pretty well but check this out, maybe it'll help. I had a cheap crappy foam cannon and something like this made it significantly better. https://www.amazon.com/dp/B07DGQGL44/ref=cm_sw_r_sm_apa_glc_fabc_6P1ZYQANRJ1CB5HD0NHB

You missed the most important number - "5/32"

It's just generic 5/32" vacuum hose sold everywhere by the foot. Or here's some good silicone stuff on amazon.

Sorry for late reply! They are on amazon, they are specifically:

SUP-LIGHT 5x7 7x6 Inch LED Rectangle Headlights compatible with H6054 H5054 H6054LL 69822 6052 6053 headlamp for Jeep Wrangler YJ Cherokee XJ with High/Low/DRL Projector Lights(2Pcs Black) https://www.amazon.com/dp/B07T9LC5LC/ref=cm_sw_r_cp_api_fabc_mmZWFbD9H5WTG?_encoding=UTF8&psc=1

https://www.amazon.com/AmazonBasics-Battery-Charger-12-Volt/dp/B07TZ12D18/ref=psdc_15707061_t1_B00CD44RQO

Front lights are SUP-LIGHT 5x7 7x6 Inch LED Rectangle Headlights compatible with H6054 H5054 H6054LL 69822 6052 6053 headlamp for Jeep Wrangler YJ Cherokee XJ with High/Low/DRL Projector Lights(2Pcs Black) https://www.amazon.com/dp/B07T9LC5LC/ref=cm_sw_r_cp_api_fabc_mmZWFbD9H5WTG?_encoding=UTF8&psc=1

And back lights are... I’ll have to ask! I took the shot of this vette, but it’s not mine and I love the look of those leds as well!

That's part of your PCV valve/line assembly. GM Part Number 12558673 I believe. Here's an amazon link: https://www.amazon.com/ACDelco-12558673-Original-Equipment-Ventilation/dp/B00S0G0KTW

Essentially you've got an unmetered air leak coming into your manifold via that crack. That can and will set a P0300.

Here's one on amazon so it should ship to Canada https://www.amazon.com/2004-CHEVROLET-COMMEMORATIVE-CORVETTE-POSTER/dp/B00VCAM7PI

It’s either the new balance or these....

https://www.amazon.com/dp/B004LBMEB2/ref=cm_sw_r_cp_api_i_KW0NDbV0TPQF6

It’s a big well known thing in the meme world association “dad sneakers” to owning a corvette and being mean on the bbq grill

You can find replacement shocks for the rear window hatch on Amazon.

https://www.amazon.com/ECCPP-Supports-1984-1996-Chevrolet-Compatible/dp/B01MSZT9XB/ref=mp_s_a_1_3?keywords=92+corvette+rear+window+shocks&qid=1564887995&replacementKeywords=rear+window+shocks&s=gateway&sr=8-3&vehicle=1992-47-44...

Not sure about either to be honest, I just have AAA and hope for the best lol. I learned you can actually buy tires and such for the car on Amazon when I started looking to replace the supersports. I signed up for their credit card that gave me like 200$ back on my order, compounded with free shipping I got a set of four + brakes delivered for just shy of 1K USD.

These are the sets I got - 20" tires for the back - https://www.amazon.com/gp/product/B009NHFBZA/

19" for the front - https://www.amazon.com/gp/product/B009NHENWW/

You'll absolutely get more life out of them for sure, I know the OEM one's were like driving on glass if it went below 40 and that's what prompted me to switch sooner than I'd originally planned.

Looks really nice. I've been debating on where to place a switch that's out of the way but easy to reach, and this seems like it would work well.

Is there a reason you tapped the heated seat fuse rather than just connecting the switch and an in-line fuse on the normal NPP circuit? I thought tapping the seat fuse was to prevent the wireless receiver on the M2W kit from draining battery?

Also, if anyone reading this has plans to get a M2W kit, save yourself some cash and buy this instead. The "official" kits just add a bit of wire, a spade connector, and a fuse tap.

https://www.amazon.com/gp/product/B002UD0GIG/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

You may want to move to the 8oz. I haven't used this yet, but someone from r/vive said yesterday they used it to repair scratches on a delicate lens (more important for functionality than your t top). I just bought this to try on my vive that has a scratched lens. If you'd want to wait a couple days I can update you on my success!

Gotcha. I drive my front tires up on 1 x 10 boards and use a Pittsburgh 1.5 ton low profile jack using the "clever method" described here.

It was really nerve-wracking the first time I lifted the C6 and put it on jackstands.

It's not as simple as taking off the valve covers and changing the springs. To do the job with the heads on the car you need to have an air compressor and a spark plug fitting from a compression tester.

• Take the spark plugs out
• attach the spark plug fitting to the air compressor and thread it into the cylinder you are currently working on.
  
• Pressurize the cylinder with air, and keep it pressurized, watch it with an inline gauge.
• Then you can undo the spring retainers and replace the springs for that particular cylinder. Rinse and repeat 7 more times.

If you don't pressurize the cylinder the valves will fall into it, then you are going to be pulling the heads.

If you are keeping the stock cam, then you can go with OEM springs. Also, while you are in there do the trunion upgrade (Comp makes a kit).

You should be able to do it with limited mechanical knowledge, but you will need an LS spring compressor tool. Although your local auto parts store might have a loaner tool you can use.

I personally went with big cam so I got dual valve springs.

i have a carb converted 84 myself, you need to use a low profile intake manifold like the edelbrock performer 2101

http://www.amazon.com/Edelbrock-2101-Performer-Intake-Manifold/dp/B000182BA8

you also need to use a low profile air filer and intake such as http://www.jegs.com/i/Spectre/865/98599/10002/-1?CAWELAID=1710692602&CAGPSPN=pla&catargetid=230006180000848377&cadevice=c&gclid=CJ7X4vCdyMcCFVU6gQodK_YCtQ which ideally has 2 tubes to use the cold air ducts through the hood, but isnt nessecary as any low profile air filter/intake will work