What are
/r/NFA's
favorite Products & Services?
From 3.5 billion Reddit comments
The most popular Products mentioned in /r/NFA:
The most popular Services mentioned in /r/NFA:
Google Podcasts
SlideShare
Trustpilot
BuiltWith
Ghostery
Is It Down Right Now?
Merriam-Webster
YouTube Music
Shutterstock
Creative Market
Storenvy
Google News
AccuWeather
Microsoft Forms
Weather Underground
The most popular Android Apps mentioned in /r/NFA:
Tasker
Slide for Reddit
Countdown Widget
Boats for Voat
The most popular reviews in /r/NFA:
One thing I've found that works decently well is silicone curling iron covers by OXO. Has good grip and is also good for range bag storage after shooting and it's still toasty.
https://www.amazon.com/gp/product/B016BJEK6I
I posted these a while back, and have been using them for 5-6 months. Love it, I can do mag dumps with the AK, and hot can straight into the pouch and into my pack.
If it’s stupid and it works, it’s not stupid.
Been using these for years for storage in the safe and transport home. If the suppressor is cool enough to remove with gloves it cool enough to go in the pouch. No more waiting around forever for it to cool off. For $5 you can't go wrong.
https://smile.amazon.com/EIOKIT-Silicone-Resistant-Straightener-Crimping/dp/B07THS7J73
Lifehack for suppressors: get a curling iron pouch, if you don't have time to wait for it to cool. They're super heat resistant.
I had Arson on it but want to see if these hold up to heat. They’re polymer so we’ll see 🤷🏻♂️
TXTactical Remote Switch Cable Organizer, Tape Switch Cable Management (Pack of 6 for MLok) https://www.amazon.com/dp/B093K4Z7GQ/ref=cm_sw_r_cp_api_glt_fabc_F1J9GBQ4FYQBFHNPJ8K1?_encoding=UTF8&psc=1
I been using these on my Nomad L and MOD9. After 150 rounds on the Nomad L smoking hot, I rest the suppressor on these silicone mats so far so good.
EIOKIT Silicone Heat Resistant... https://www.amazon.com/dp/B07X9Y42VX?ref=ppx_pop_mob_ap_share
Also great for transport from gun safe to range and put hot suppressor in these during your drive back home etc
Zenith Z43 SBR
German Buffered Bolt Carrier to allow use of the A3 stock.
Buffered Fixed Stock (allows use of non-buffered Turkish bolt carrier)
HK33K Wide Handguard.
HK German Magazines
Omega MP5
MAD Bolt head
A3 F Type stock converted to a traditional A3
AAC Tirant 9 w/Three Lug Adapter (well worn as you can see)
Midwest Industries MLOK Handguard
A3 Industries MP5K style foregrip
B&T Claw Mount
Aimpoint T-1
Rear drum from a HK91 for use with the Aimpoint.
Slate Black Industries MLOK Covers
Form 1 one of these.. Once approved thread the front to 1/2x28. I also suggest getting a new end cap. Voila!
You can do fingerprint cards yourself. Amazon has them on prime. If that isn't enough time, there's most likely someplace that will do them for a few bucks. Search for fingerprint services near you.
This is my cleaning method, I have the Warlock 22 from SiCo and use these plastic dental picks from Amazon. I mainly use the small flat tipped pick as this allows me to scrape off the gunk fairly easily but not damage the aluminum. I also do clean the baffles with some solvent, a nylon brush, and rags to help loosen up the carbon buildup.
Nope. I just legally sourced the correct size wipes from an NFA manufacturer and put them in the front end cap with a friction fit. Obviously I would never advocate buying the correct size arch punch and a silicone sheet to make your own wipes because that is bad for the dogs health.
Do yourself a favor and get some of the mechanix carbonx gloves if you can afford them. If not an oven mit will work but not as well and you'll lose some dexterity you'll wish you had when it's 500 and stuck. You can grab it fucking smoking hot no problem with the stage 2 gloves. They make a stage 3 pair but that's crazy land hot. Step 2 is to drop it into a curling iron bag off amazon that costs like $12 instead of $100 for a gun one - https://www.amazon.com/OXO-Resistant-Silicone-Travel-Curling/dp/B016BJEK6I/
Praise him.
You can find some rockset on Amazon if you want a big bottle. I bought some of this about a year and a half ago and I don't think I'll ever run out.
Doesn’t matter, I got some from from amazon it’s a 9 pack for like $13 and it has difference thickness so you can time it correctly so it won’t be all wonky. But don’t use a crush washer on it
1/2" x 28 Barrel Shim Muzzle Brake Alignment Shim Kit 5.56 223 indexing https://www.amazon.com/dp/B01FZLM2A4/ref=cm_sw_r_cp_api_i_51-bDbR0325TH
It appears to be somewhat repeatable shot to shot? What happens if you remove the can and then reattach it? Different POI?
Did you check the can alignment? One easy way to do it is a 9mm bore laser and some tape across the front of the can.
I'm a big fan of the dip for heavy duty cleaning. Obviously, insert warning about how nasty and toxic the stuff is. I will say I've become a big fan of anti-spatter spray...I give the internals a quick spray and 90% of the fouling just wipes off. https://www.amazon.com/CANTESCO-AS-16-Solvent-Anti-Spatter-Aerosol/dp/B008BJCY1K/ref=sr_1_3?dchild=1&keywords=anti%2Bspatter&qid=1627311941&sr=8-3&th=1
Something like this
USB Snake Inspection Camera,Fantronics 2.0 MP IP67 Waterproof USB C Borescope,Type-C Scope Camera with 8 Adjustable LED Lights for (16.4ft) Samsung Galaxy S9/S8, Google pixel, Nexus 6p(Not for iPhone) https://www.amazon.com/dp/B071HYRPND/ref=cm_sw_r_cp_api_glt_fabc_NN78T2HWPRYJQ6E590XB
This. ATF sent a stack of 20 without question. I'm not sure what their limit is, but I'm good for 10 forms in a single form request.
These excel mark inkless pads make a really clear print with little cleanup and no smear.
https://www.amazon.com/dp/B0043GF5H0/ref=cm_sw_r_cp_apa_glt_fabc_6Y6F1M3KKT7F8XM2YX4Q
I keep one of these in my bag. Works great. Good up to 500 degrees.
I've got this. Cheap, takes AAAs, and works quite well. I've got the delay turned down to the ~10s minimum (from last motion detection) to extend battery life, but you can also run it off of a dedicated micro USB supply.
But these things are the tits
AFA Tooling Long Reach Deburring Tool with 15 High-Speed Steel Rotary Burr Removal Blades and Countersink Hand Reamer https://www.amazon.com/dp/B07QKQF9J1/ref=cm_sw_r_cp_api_glt_fabc_5X5MBZ4WR63Y77R7K4HQ?_encoding=UTF8&psc=1
CO-Z 2L Ultrasonic Cleaner with... https://www.amazon.com/dp/B075FTFD3R
I might return it to get a 3L one. But 2L fit all these baffles. I could also put in Obsidian 9 baffles at the same time with enough space.
Also cleaned my trigger group for an SP5. I’d say 2L will cover like 85% of most cases
I’d say take a peek at Parker’s book for old school patent designs: https://www.amazon.com/United-States-Patents-Firearm-Suppressor/dp/1581604602 and it’s still a fun read, like Alan Paulson’s old book series on silencers... https://www.amazon.com/Silencer-Performance-Sporting-Tactical-Silencers/dp/0873649095/ref=mp_s_a_1_1?dchild=1&keywords=paulson+silencer&qid=1604988924&sr=8-1 but that stuff was written back when Google wasn’t a thing. Now you can just research designs via image search - see what other major manufacturers are using. There’s tons of cutaways and drawings online to see what wheels not to reinvent or patents not to trod upon, etc.
I use this one I got off amazon it's their best seller and it works great
1 inch pipe brush. $6 off Amazon. Edited for link.
I have a decent replica pith helmet lmao you wanna buy it? I bought it for the memes and I kinda don’t need it anymore 😂
I’m 90% sure it’s this one
You can order the cards from the ATF website for free. Literally as many as you want.
I bought an ink-less finger print pad off of Amazon for $6.99 (link here).
I've turned in multiple Form 1 applications and have never been turned down. Just practice first and go slow.
Don't use loctite, it's designed to loosen with heat.
Rocksett is the correct product for securing anything that gets warm, including muzzle devices. I use this one, $10 from Amazon.
Decibel Meter Pro is full of features sound level meter with an exclusive accuracy of measurements and integrated spectrum analyzer. Calibrated with the professional dB meter.
The world is a noisy place: cars, power tools, crowds, machinery, and other common sources produce amounts of noise that can, with continued exposure, lead to a permanent hearing loss. Sound level meters are useful for anyone who wants to avoid exposing their ears to harmful noise levels, but who wants to spend hundreds of dollars on one?
dB Meter is a free app which provides professional-quality measurement results, calibrated using an actual Nor140 high-precision decibel meter. With dB Meter, you can measure ambient noise levels, save your measurements and their locations, and share your measurements with others. dB Meter couples utility with stylish design and a polished user experience: a powerful tool in a sleek package, and at a tiny fraction of the cost of professional sound level meters.
Anybody have any idea of something on Amazon or something that would be good to use instead of an oven mitt? I know an oven mitt fits the bill but I'd like something a little less kitcheny.
Edit: Maybe these are a good option: DII 100% Cotton, Machine Washable, Quilted Everyday Heat Resistant Kitchen Basic Terry Potholder Set of 3, Black https://www.amazon.com/dp/B003WOJLGU/ref=cm_sw_r_other_awd_-4UkwbMD0DJE3
Still flexible enough to use to grab and unscrew a suppressor but also would work nice as a mat to lay it down on while it cools off.
Walmart carries it.
LPT This is the exact same item without the Hornady logo. Will save you some money. I have one and it works great. iSonic P4810 Commercial Ultrasonic Cleaner, 2.1Qt/2L, White Color, Plastic Basket, 110V https://www.amazon.com/dp/B005GA1I3M/ref=cm_sw_r_awd_c3U.vb6HDVJWK
You can buy a welders blanket for pretty cheap on Amazon. Lay the rifle on top of it and make sure it won't slide around. I'd definitely let it cool as much as you can though.
Speaking from my own experience i’d ditch the oven mitt and get a good pair of heat resistant gloves. I used the oven mitt that silencer shop sent with my Sandman S and I could never get a feel for how ratcheted down it was because the material on the mitt got hot from the can and made it super soft/slick and basically just spun right over the suppressor. When I started using gloves it gave me a super close feel for the can since it was the closest thing to my bare hand that getting a feel on the can (also better grip) and I havent come anywhere close to burning my hand. I use it on my rifle cans that both use dead air key mo, my Obsidian .45 and my DA Mask and I haven’t had any issues getting a legit feel if my can is tight or loose. Once again, just in my experience I’m creeping up on 3k ish + rounds in my Sandman with zero issues.
Sure, but you don't get to then say yours is the best amongst those because individuals with wildly different inherent biological acoustics can't tell the difference when equipment and data can.
The point of PewScience was objectivity, and Jay was extremely kind about Kevin not being immediately accepting of the results, while Kevin continued down the rabbit hole of insane, public comments. Those public comments are what he's being judged on, and has lost business due to.
THAT ALL SAID I have specifically stated publicly that I in fact respect his choice not to appeal to all customers but instead to a subset of the market that clearly likes his rhetoric and product marketing. It works for him and Q and he is still thriving in business as such.
The book "Pink Goldfish" illustrates this strategy perfectly - sell to your customers, not all customers otherwise you dilute your product, marketing and/or brand.
Next step up is Radioddity for GMRS. I have a UV5R and the Radioddity GM-30 is much nicer.
The next step after that is Wouxun. Something like the UV9GX
Oh lol it's just a cheap desk lamp I pressed into service similar to this
The trick is to angle the backlighting along the gun to create specular highlights on the top edge.
They sell a really nice Fluke on Amazon pretty cheap I use for bearings and my coal burning stove that's been very good to me. Just buy a nice one, I wish I did years ago because I use it all the time for dumb projects.
​
Earplugs are lighter than a suppressor
It's just 1/2" plywood nailed together. The suppressor dividers are just 1/2" plywood cut at a 30 degree angle over and over.
I use superglue to glue felt down anywhere that is exposed: https://www.amazon.com/dp/B08K1SF9XT
Learn to do them yourself.
The first 3 times I did a Form 1 I had a local NFA dealer do them for me. They are nice shop and did them for free since I had previous bought a couple of cans from them in the past.
Then I bought an inkless fingerprint pad from Amazon and practiced on a few cards till I was comfortable. I've done the last six Form 1s that way and have yet to have a set of fingerprint cards rejected. People think they have to be perfect, but they really don't. The biggest key is not to smudge them and to fill the card out correctly.
https://www.amazon.com/dp/B083KFSNG2?psc=1&ref=ppx_yo2ov_dt_b_product_details&pldnSite=1
I bought one of these not long ago to clean my bolt carrier. Plan to use on my nomad when I can take it home.
I'm not an expert tho.
https://www.amazon.com/Drawing-Stencils-Set-Kids-54-Piece/dp/B01E9425PK
​
​
Lol I was just kidding. I use a local place for all my Form 1's. Super convenient instead of having to ship it somewhere like Capitol or Tarheel.
It’s this one! I love it! Savior Equipment Specialist Series 30” 34” Tactical SBR Rifle Bag Gun Backpack Soft Firearm Case with Compartment, Perfect Bug Out Truck Bag, Hideable Backpack Straps, MOLLE Panel https://www.amazon.com/dp/B086R7PTNH/ref=cm_sw_r_cp_api_i_1BJ8PXZNVAVGVBH9PZBY?_encoding=UTF8&psc=1
You'll have to buy the book here
TL;DR: The program revolves around taking your normal 10 rep high intensity work weight and doing it for 20 reps in 1 set with breathing squats. You'll do this 3x a week and every time you do it successfully you'll add 5 pounds to the bar for the next session. Repeat until you just fail a whole bunch. Read the book though it's cheap, short, and easy to understand.
Here is the one I ordered. Shipping says it arrives tomorrow. Looks like it has 5 star reviews from 600+ reviewers https://www.amazon.com/dp/B001C1D800/ref=cm_sw_em_r_mt_dp_Z4N68BSJ14H4DGTFFP8G?_encoding=UTF8&psc=1
Here is the one I ordered. Shipping says it arrives tomorrow. Looks like it has 5 star reviews from 600+ reviewers
I suggest getting a better picatinny-mlok adapter for the grip. I assume that’s what that horizontally extended adapter is…and it looks strange to me.
Why not go with something like this?
https://www.amazon.com/Magpul-M-LOK-Aluminum-Picatinny-Accessory/dp/B08BMBPJRW
It’s cheap, made by Magpul so you know it’s good, and very small to help with the handguard/trigger guard spacing issues I see you discussing in other posts
Or just buy it off Amazon directly from Flexbar, the people who make Rocksett. https://www.amazon.com/Flexbar-15015-High-Temperature-Rocksett/dp/B001C19278/ref=sr_1_4?crid=101Y7BI76SD3P&keywords=rocksett&qid=1651644440&sprefix=Rockse%2Caps%2C142&sr=8-4
This doesn't help now, but could in the future. I've bought a curling iron travel sleeve to slide over the can when storing/transporting hot.
It's kept me from burning myself, my range bags, my truck, and my wife more than a few times.
I use this on my ARs, works for me. Just have to make sure it clears the ejection port cover.
If you want the real story read the book https://www.amazon.com/Mac-Man-Gordon-Ingram-Submachine/dp/0982391811
Basically MAC was selling their machine guns for less than it cost to manufacture, they were only selling to governments and most governments weren't interested or only purchased a handful, and salesman have lots of overlapping territories. It was RPB and SWD that figured out the most money was to be made in civilian sales.
Birchwood Casey E & F Super Blue Liquid Gun Blue 90 Ml https://www.amazon.com/dp/B002J1QBEC/ref=cm_sw_r_cp_api_glt_i_NDFX5Y461SA8S0R2D9DX this is for steel, they also have an aluminum version. I have used this for engraving as well as slight scratches on my 1911s and AR’s.
It’s not about timing in your case. You don’t want to use a crush washer when mounting any muzzle device that will mount a suppressor. It can lead to misalignment and possible baffle strikes.
If I’m not timing a muzzle device, I still use a shim or two when tightening it down.
You can get them from Amazon - https://www.amazon.com/Barrel-Muzzle-Alignment-Indexing-Stainless/dp/B086MLPLJJ
I’ve bought multiple times from that brand. Works perfectly fine. Spend the $10 to get them, it’s not worth the headache if you are using a crush washer.
DUDE! SRSLY?!?!!? I guess I'll have to be the first to point out your complete lack of Hello-Kitty! No one will take you seriously unless this is dangling off the mag tube. https://www.amazon.com/dp/B082QRTJ5M
I picked one up at my gun show for $20 from a dude who made those sorts of accessories in his spare time. Mine was drilled out from an FAL
It's not this exactly but can be found here: https://www.amazon.com/dp/B071JCHMNL/ref=cm_sw_r_apan_glt_i_SPEEJ4P5TF5MNV9JHD1V
Danger! Have not shot with it yet and am relying on Rugged’s unconditional warranty if something goes wrong with this adapter. Appears well made and fits very tight. Link below.
VANVIN Thread Nut Combo Thread Protector Metal Part Adapter kit https://www.amazon.com/dp/B09JPCK5Z8/ref=cm_sw_r_cp_api_glt_i_0M737NBJ02D9WBAK6PGE?_encoding=UTF8&psc=1
SS just posted this on a comment in the SS sub. hope it helps
​
Good point, they do make a tool you can just throw in the drill as well for $12.
Deburring External Chamfering Tool, Chamfer Tool Deburring External Drill High Speed Stainless Steel Burr Removal Bit Quickly Repairs Damaged Metal External Chamfer Deburring Tool (Silver-2Pack) https://www.amazon.com/dp/B07ZSFH918/ref=cm_sw_r_apan_glt_i_VNS97Q0JYM83TYX5Q7KB
Protip for that cabinet, upgrade the nozzle with a blastline upgrade kit The gravity feed and metering valve means you use way less media and its more efficient at surfacing because you control how much medium gets sent through the nozzle
Blastline Suction Blast Cabinet Gun and Metering Valve Kit w/ 1/4" Orifice (#4) Ceramic Nozzle https://www.amazon.com/dp/B07SMVKDS7/ref=cm_sw_r_apan_glt_i_2BZ77YVYPWVX9KPY9KHF?_encoding=UTF8&psc=1
Curling iron pouch for $6 on amazon is the answer. I have one for each suppressor. Been using them for years for transportation and storage. If I can take the suppressor off the gun, it can go in the pouch no matter how hot it is.
https://www.amazon.com/Resistant-Silicone-Portable-Chilling-Straightener/dp/B07R8LRD3N
gotcha! Bummer about the Optimus. I seem to have no issues with seizing at all, but my plan a mount is an aftermarket super precision concepts titanium mount, so that might make a difference.
You may also try ceramic antiseize on the threads/taper if you haven't. . I apply a tiny bit every few trips.
Cool project - fun to see people being creative. For peace of mind, I’d recommend a humidity sensor. I’ve had this one for 3+ years now and it’s still running strong. This can push alerts to your phone if the temp or humidity exceed a set number. Lack of airflow can be problematic in certain climates (source: am Building Inspector)
Buy this:
OXO Good Grips Heat Resistant Silicone Travel Pouch for Curling Irons and Flat Irons https://www.amazon.com/dp/B016BJEK6I/ref=cm_sw_r_cp_api_glt_i_YVBEMGPK8W355A7YES8E?_encoding=UTF8&psc=1
It’s grippy enough that you can actually remove your can from the gun and then leave it in there to cool. Insanely handy tool.
dude I throw these on a few of my pistol https://www.amazon.com/gp/product/B081J8NYYT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I've ran over them, gotten them wet, etc. Cheap doesn't mean bad and neither does "bad press" lol
Order fingerprint cards from ATF here
https://www.atf.gov/distribution-center-order-form
Get an ink pad off Amazon
Fingerprint Ink Pad (Pack of 2) -... https://www.amazon.com/dp/B082ZCQ4X1?ref=ppx_pop_mob_ap_share
submit application, mail cover sheet and prints off next day. Email back from ATF with approval contains stamp, no physical stamp is sent.
The one you submitted will be rejected and your money refunded since you didn’t send prints. You’ll have to start over.
#FuckThisHighHumidity indeed. Yeah A/C is a god send in the south. It's not any better down in NC either. If only the moisture would collect on the mosquitoes so they would chill out for a bit.
I put one in my bedroom wall a couple years ago and love it. Simplex lock, and perfectly hidden under a family photo. Get this as well:
https://www.amazon.com/dp/B00J4EQVPG?ref=ppx_pop_mob_ap_share
Any of them will work, the guy I got my vault door from gave me one of these cheap little magnetic Hygrometer’s that I just stuck to a wall panel and it lets me know the humidity & temp in the room.
https://www.amazon.com/Thermometer-Hygrometer-LAFEINA-Temperature-Backlight/dp/B075ZR4Y8N
https://www.amazon.com/dp/B081SFRQLS?psc=1&ref=ppx_yo2_dt_b_product_details
Seems to mount up the camera pretty well, but tomorrow will be the real test.
I bought this a few months ago and every time I use the side entry zipper I think about how perfect it would be for off body carry. Mount a bigger pull tab and you could have super fast access.
Check out the Oakley extractor. It's a solid off body carry bag that could easily hold both of those. It's a sling style.
https://www.amazon.com/dp/B07YBF2BRQ/ref=cm_sw_r_apan_glc_fabc_8XAZB51WSK5HW9Q133A7
I bought one of these to slide over my can/upper when traveling with a hot can.
ZAXOP Resistant Silicone Mat Pouch for Flat Iron, Curling Iron,Hot Hair Tools (Black) https://www.amazon.com/dp/B07MJFD63Q/ref=cm_sw_r_cp_api_glt_fabc_8H0VY9X74Z2AAESWRD33?_encoding=UTF8&psc=1
Forget the worms and get a couple of bags of these. Albanese World's Best 12 Flavor Gummi Bears https://www.amazon.com/dp/B00OYPFC46/ref=cm_sw_r_cp_api_glt_fabc_Z09VX63FCY0Y9Y38EVJF?_encoding=UTF8&psc=1
Give these a try, I'll definitely use them again.
Hold Up Displays Horizontal Gun Rack Storage and Shotgun Hooks Store Any Rifle Shotgun and Bow - Heavy Duty Steel - (2 Pack) Made in USA https://www.amazon.com/dp/B07PHKTVYT/ref=cm_sw_r_apan_glt_fabc_P5XZBKW211RYN713MVBE?_encoding=UTF8&psc=1
how about something like this: https://www.amazon.com/gp/product/B00JVSZXF4/ref=ox_sc_saved_title_3?smid=AMVEDE5WH6QZS&psc=1
If you have a dremel, that might do the trick. Would take a little bit of work in terms of manually moving the tube through the working area, but it could be doable. At $50 a pop for engraving, if you plan on having more than 3 or 4 NFA items, the thing pays for itself.
That should work. It’s easy after a a couple.
I got this one: https://www.amazon.com/gp/aw/d/B09CF1PDXX/ref=sspa_mw_detail_5?ie=UTF8&psc=1&smid=A3N7FPTWTVRIWCp13NParams
Get the ORA info from national gun trust’s site. I think you can order up to 100 cards on the ATF form order page and they will com with the ORA pre stamped in the field.
Thank you! Here's what I got... Says it comes with Ink pad... So hopefully that works well. And some extras if I mess it up. Hopefully I got something that is legit.
FD-258 Fingerprint Kit: 5 Cards, Ink, and Directions https://www.amazon.com/dp/B07G1J4FKD/ref=cm_sw_r_apan_glt_fabc_8HCFSXXTWP9HTJV09XX4
You don’t need all the foam padding, it just takes up space. These parts are not fragile.
Tech kit Organizer, Basic Hard Drive case, Vape Carrying case, Case for Hard Drive, GPS case, Travel tech Organizer, Hard Drive Portable Carrying case, Electronics Travel Organizer, Vape case Travel… https://smile.amazon.com/dp/B08R3VHB3T/ref=cm_sw_r_cp_api_glt_fabc_EFMK541BHD8PZ02P6M0S?_encoding=UTF8&psc=1
Case is slightly bulkier than I was hoping but for the price hard to beat.
Sharpie Oil-Based Paint Markers, Medium Point, Assorted Colors, 8 Count - Great for Rock Painting https://www.amazon.com/dp/B08BQV8Y5F/ref=cm_sw_r_apan_glt_fabc_9Z96EMQVPFYFPRGQ0CKE
Storacell SLCR123CC by Powerpax SlimLine CR123 Battery Caddy, Clear, Holds 4 Batteries https://www.amazon.com/dp/B00AKI6VIM/ref=cm_sw_r_apan_glt_fabc_7DA6MHKM44134YM8M583?psc=1
Ive used these for a long time. Loose lithium batteries clanking around can cause a fire. These are great to keep in your gear for different types of batteries. Sometimes I even put one of these inside my ifak so I have an emergency set of batteries for my gear.
Case Club 5 Pistol and (up to) 30 Magazine with Accessory Pocket Pre-Cut Heavy Duty Waterproof Case with Silica Gel Canister to Help Prevent Gun Rust https://www.amazon.com/dp/B00K7M261M/ref=cm_sw_r_apanp_IJ4UOUNVWE9i4
For sure! And FYI Paco is the designer of all CGS cans, so I'd assume his word is trustworthy 😅. I checked Amazon as well and it says "Safe for Aluminum" also. Haha I researched it a bit before I ordered a can with aluminum baffles 🤣
ZAXOP 2 Pack Heat Resistant Silicone Mat Pouch for Flat Iron, Curling Iron,Hair Straightener,Hair Curling Wands,Hot Hair Tools (GREY & HOT PINK) https://www.amazon.com/dp/B07X4FKP69/ref=cm_sw_r_cp_api_glt_fabc_4AZXAQ73MCYT9D60QSXK
2-pack for 10$
I have 3 stamps on a trust, and the last one was since they required photos. I bought an Android app (it's probably on iOS, too, but I'm not connected to the company) that made the passport photos stupid easy. I think it cost under $1 to get them printed at the local CVS.
https://play.google.com/store/apps/details?id=id.passport.photo.lite
Most folks start out with Paulson or Truby’s books, and there’s tons of good info in Small Arms Review magazine’s website of archived articles https://www.amazon.com/Silencer-Performance-Sporting-Tactical-Silencers/dp/0873649095 And https://www.smallarmsreview.com/display.article.cfm?idarticles=3819 Nose around, Google for silencer history PDFs. There’s PDFs of a lot of the old 80’s silencer books floating around out there.
Actually have these (they were a lot cheaper last year) and have taken off a hot can without swearing. Leather held up fine. No where near devil's popsicle capable, but easily handle "two guns, one can" hot and "we are done, this will melt my bag, throw it in the sleeve" hot.
Buy this: CO-Z Ultrasonic Cleaner w Heater and Timer, 0.85gal. Professional Ultrasonic Cleaning Machine, Sonic Cavitation Machine w Knobs for Professional Jewelry Watch Glasses Cleaning More, Stainless Steel https://www.amazon.com/dp/B08LGCJ5Y2/ref=cm_sw_r_cp_api_glt_fabc_BWEKRXEFHR3DQ0SKYX7W?_encoding=UTF8&psc=1
Buy some Purple Power. Mix 50/50 with water. Pop in everything but the tube for 1 hour and boom. Brand new can!
as u/noearthshaker suggested, I recently picked up a couple of these Pouches for storing the cans.
I have the Bowers sleeve on one can, and I was surprised that even with that sleeve I couldn't remove the can. the sleeve heated up, and spun around the can when I tried to remove it from the mount, and was still burning my hand if I gripped it too long.
Get this: https://www.amazon.com/Systems-Trituim-Express-Barrel-Shotgun/dp/B00PNDX5LU?th=1&psc=1
It’s easy to guesstimate targeting quite well. I’ve got a form 1 atm, no issue even though the can takes up the bead. There’s two variants so make sure you get the one for your shotgun. Easy install.
Hammers 45 Degree Angled Forward Extending 1 inch Micro Mini Riser Mount with QD Cam Lever Lock and Picatinny Rail Top for Mini Micro Red Dot Sights https://www.amazon.com/dp/B01A1WPAOC/ref=cm_sw_r_cp_api_glt_fabc_3M19AD8V6FN9VHGQ8Y63?_encoding=UTF8&psc=1
Here's the cheap easy solution that everyone in this thread is referring to: Gas Buster Charging Handle DIY - No Gas in Face!
This is the RTV silicone gasket stuff you want to buy: Permatex 82180 Ultra Black Maximum Oil Resistance RTV Silicone Gasket Maker, 3.35 oz. Tube